Suche nach
in	in allen Feldern AutorTitelBeschreibung
Kategorie	alle Kategorien auswählenBücher, MonographienOffenlegungsschriftenPatente in KraftAbgelaufene PatenteInternationale wissenschaftliche Beiträge in Fachzeitschriften, begutachtetInternationale wissenschaftliche Beiträge in Fachzeitschriften, nicht begutachtetInternationale Konferenzbeiträge, begutachtet Internationale Konferenzbeiträge, nicht begutachtetNationale wissenschaftliche Beiträge in Fachzeitschriften, nicht begutachtetNationale Konferenzbeiträge, nicht begutachtetVeröffentlichte BerichteWissenschaftliche Symposien Betreute PromotionenDissertationen
Jahr	2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1990 1989 1988 1987 1986 1985 alle Jahre

2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1990 1989 1988 1987 1986 1985 alle Jahre

Bücher, Monographien

Maroldt, N.; Kauth, F.; Seume, J.R.  (2020): Experimental Validation of an Optimized Design Process for Transonic Mixed-Flow Compressors, Contributions to the Final Symposium of the Collaborative Research Center 880, December 17-18, 2019, Braunschweig, Germany
DOI: https://doi.org/10.1007/978-3-030-52429-6
ISBN: 978-3-030-52428-9

Nachtigal, P.; Mai, H.; Rätz H.; Willers, O.; Seume, J.R. (2020): Auslegung und Regelung eines Pulsationsgenerators für Turbolader-Heißgasprüfstände, Spannungsfeld Fahrzeugantriebe – Gedenkschrift für Prof. Dr.-Ing. Roland Baar, Universitätsverlag der TU Berlin, S. 628
ISBN: 978-3-7983-3161-7

Lechner, C.; Seume, J.R. (Hrsg.) (2019): Stationäre Gasturbinen, 3. neu bearbeitete Auflage, Springer-Verlag
DOI: 10.1007/978-3-662-56134-8
ISBN: 978-3-662-56134-8

Seume, J.R.; Gier, J. (2018): R8 Gasturbinen, In: Dubbel Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 25. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
ISBN: 978-3-662-54805-9

Seume, J.; Mailach, R. (2014): R1 Grundlagen der Strömungsmaschinen, In: Dubbel Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 24. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
DOI: 10.1007/978-3-642-38891-0_102
ISBN: 978-3-642-38890-3

Seume, J.R. (2014): Entscheidungsspielräume im Alltag des Maschinenbau-Ingenieurs, In: Verantwortung von Ingenieurinnen und Ingenieuren. (Hieber, L.; Kammeyer, H-U. (Hrsg.)), S.113-120, Springer-Verlag Berlin Heidelberg
DOI: 10.1007/978-3-658-05530-1
ISBN: 978-3-658-05529-5

Lechner, C.; Seume, J.R. (Hrsg.) (2010): Stationäre Gasturbinen, 2. neu bearbeitete Auflage, Springer-Verlag
ISBN: 3540927877

Goldhahn, E.; Alhaj, O.; Herbst, F.; Seume, J. (2009): Quantitative Measurements of Three-Dimensional Density Fields Using the Background Oriented Schlieren Technique., In: Imaging Measurement Methods for Flow Analysis. (Nitsche, W.; Dobriloff, C.), pp.135-144. Springer-Verlag
DOI: 10.1007/978-3-642-01106-1_14
ISBN: 978-3-642-01106-1

Lechner, C.; Seume, J.R. (Hrsg.) (2003): Stationäre Gasturbinen, Springer-Verlag Berlin Heidelberg
ISBN: 978-3-540-92788-4

Hellmich, B. (2000): Der Zweck der Zirkularität. Der 2.Hauptsatz der Thermodynamik im Reich der Naturnotwendigkeit, Mit und gegen Hegel. Von der Gegenstandslosigkeit der absoluten Reflexion zur Begriffslosigkeit der Gegenwart, Lüneburg 2000, zu Klampen-Verlag, ISBN: 3-924245-91-6

Offenlegungsschriften

Volkswagen (2017): Abgasturbine, Abgasturbolader, Brennkraftmaschine und Kraftfahrzeug, Erfinder: Jörg R. SEUME, Melf PETERS, Thorsten KLEINE SEXTRO, Jasper KAMMEYER, Axel GROENENDIJK und Oliver HOLTHOFF. 01.06.2017. Anmeldung: 25.11.2015. DE, Patentschrift DE102015223257

Patente in Kraft

IFTA Ingenieurbüro für Thermoakustik (2016): Verfahren zur Untersuchung des frequenzabhängigen Schwingungsverhaltens eines Brenners, Erfinder: Jörg R. Seume, Jakob Hermann., 21.01.2016. Anmeldung: 19.03.2004. DE, Patentschrift DE102004013584

Volkswagen (2011): Abgasturbolader mit einer Radialturbine, Erfinder: Jörg R. SEUME, Peter Wolfgang MANZ, Yavuz GÜNDOGDU, Jasper KAMMEYER., 13.01.2011. Anmeldung: 06.07.2009. DE, Patentschrift DE102009031787

Abgelaufene Patente

Gottfried Wilhelm Leibniz Universität Hannover (2012): Fluid-flow machine for use in e.g. electric car, has compressor and turbine arranged on shaft that is connected with electrical generator for generating electrical energy, where generator is arranged on shaft between compressor and turbine, Erfinder. Jörg R. SEUME, Jasper KAMMEYER, Christoph NATKANIEC., 05.04.2012. Anmeldung: 04.10.2010. DE, Patentschrift DE102010047421

Goodrich Hella Aerospace LS (2006): Air Outlet Device for a Vehicle, Erfinder: Jörg R. SEUME, Tom STEGLICH, Stefan THOMASSIN., 01.06.2006. Anmeldung: 26.11.2004. EP und US, Patentschrift EP1661806 und US2006116063

Siemens (2001): Gas Turbine Blade, Erfinder: Jörg R. SEUME., 25.01.2001. Anmeldung: 19.07.1999. WO, Patentschrift WO2001006096

Siemens (2000): Acoustic energy reduction method for gas turbine plant, Erfinder: Jörg R. SEUME, Mark OLESEN., 20.04.2000. Anmeldung: 16.10.1998. DE, Patentschrift DE19849300

Siemens (1998): Method and Device for Acoustic Modulation of a Flame Produced by a Hybrid Burner, Erfinder: Jörg R. SEUME, Nicolas VORTMEYER, Stephan GLEIS, Jakob HERMANN, Dieter VORTMEYER. , 12.03.1998. Anmeldung 19.08.1997. WO, Patentschrift WO9810226

Siemens (1998): Burner Configuration and Method for Active Damping of Combustion Oscillations, Erfinder: Jörg R. SEUME, Nicolas VORTMEYER, Jakob HERMANN, Dieter VORTMEYER, Carl-Christian Hantschk, Peter ZANGL, Stephan GLEIS., 06.08.1998. Anmeldung: 03.02.1998. WO, Patentschrift WO9834067

Internationale wissenschaftliche Beiträge in Fachzeitschriften, begutachtet

Cengiz, K.; Özyörük, Y. (2020): Experiences with two detached eddy simulation approaches through use of a high‐order finite volume solver, International Journal for Numerical Methods in Fluids
DOI: 10.1002/fld.4811

Eggers, T.; Kim, H.R.; Bittner, S.; Friedrichs, J.; Seume, J.R. (2020): Aerodynamic and Aeroelastic Effects of Design-Based Geometry Variations on a Low-Pressure Compressor, International Journal of Turbomachinery Propulsion and Power 2020, 5(4), 26
DOI: 10.3390/ijtpp5040026
ISBN: 2504-186X

Gilge, P.; Mulleners, K.; Seume, J.R. (2020): Experimental Analysis of Multiscale Vortex Shedding in Turbulent Turbomachine Blade Wakes, AIAA Journal
DOI: https://doi.org/10.2514/1.J059476

Lehnhoff, S.; Gómez G.A.; Seume, J.R.  (2020): Full-scale deformation measurements of a wind turbine rotor in comparison with aeroelastic simulations, Wind Energy Science 5, S. 1411-1423
DOI: 10.5194/wes-5-1411-2020

Meinzer, C. E.; Seume, J. R.  (2020): Experimental and Numerical Quantification of the Aerodynamic Damping of a Turbine Blisk, ASME. J. Turbomach
DOI: https://doi.org/10.1115/1.4048192

Schwarzbach, F.; Mimic, D.; Herbst, F. (2020): Profile Aerodynamics of an Oscillating Low-Pressure–Turbine Blade, International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), October 2020, Volume 11, Number 4

Seehausen, H.; Gilge, P.; Kellersmann, A.; Friedrichs, J.; Herbst, F. (2020): Numerical Study of Stage Roughness Variations in a HPC , International Journal of Gas Turbine, Propulsion and Power, June 2020, Volume 11, Number 3

Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R (2020): Greater efficiency thanks to smaller gaps – investigations on pressure distribution in the impeller backplane cavity of a high speed centrifugal compressor., Pumps and Compressors for the World Market 2020, VDMA-Verlag, pp. 66-72

Gilge, P.; Kellersmann, A.; Friedrichs, J.; Seume J.R. (2019): Surface roughness of real operationally used compressor blade and blisk, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
DOI: 10.1177/0954410019843438

Gößling, J.; Ahlefeldt, T.; Hilfer M. (2019): Experimental validation of unsteady pressure-sensitive paint for acoustic applications, Experimental Thermal and Fluid Science: Volume 112
DOI: https://doi.org/10.1016/j.expthermflusci.2019.109915

Miro, S.; Willeke, T.; Broggi, M.; Seume, J. R.; Beer, M. (2019): Reliability Analysis of an Axial Compressor Based on One-Dimensional Flow Modeling and Survival Signature, ASME. ASME J. Risk Uncertainty Part B. 2019;():
DOI: 10.1115/1.4043150

Willers, O.; Valstar, F.; kleine Sextro, T.; Flinte, J.; Fischer, T.; Eilts, P.; Seume, J.R.  (2019): Erhöhung des Low-End-Torque eines Ottomotors durch Querschnittsvariation des Turboladerverdichters, Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature 2020 J. Liebl (Hrsg.): Experten-Forum Powertrain: Ladungswechsel und Emissionierung 2019, Proceedings, S. 57–70, 2020.
DOI: https://doi.org/10.1007/978-3-658-28709-2_5
ISBN: 978-3-658-28709-2

Yirtici, O.; Cengiz, K.; Özgen, S.; Tuncer, I.H. (2019): Aerodynamic Validation Studies on the Performance Analysis of Iced Wind Turbine Blades, Computers & Fluids
DOI: 10.1016/j.compfluid.2019.104271

Bode, C.; Friedrichs, J.; Frieling, D.; Herbst, F. (2018): Improved Turbulence Prediction in Turbomachinery Flows and The Effect on Three-Dimensional Boundary Layer Transition, Int. J. Turbomach. Propuls. Power 2018, 3(3), 18
DOI: 10.3390/ijtpp3030018

Burgmann, S.; Fischer, T.; Rudersdorf, M.; Roos, A.; Heinzel, A.; Seume, J.R. (2018): Development of a Centrifugal Fan with Increased Part-Load Efficiency for Fuel Cell Applications, Renewable Energy, Volume 116, Part A, February 2018, Pages 815-826

Goldmann, A.; Sauter, W.; Oettinger, M.; Kluge, T.; Schröder, U.; Seume, J.R.; Friedrichs, J.; Dinkelacker, F. (2018): A Study on Electrofuels in Aviation, Energies 2018, Vol. 11(2), 392
DOI: 10.3390/en11020392

Liu, X.; Willeke, T.; Herbst, F.; Yang, J.; Seume, J.R. (2018): A Theory on the Onset of Acoustic Resonance in a Multistage Compressor, J. Turbomach 140(8), 081003 (Jul 24, 2018) (12 pages)
DOI: 10.1115/1.4040551

Mimic, D.; Drechsel, B.; Herbst, F. (2018): Correlation Between Pressure Recovery of Highly Loaded Annular Diffusers and Integral Stage Design Parameters, J. Turbomach 140(7), 071002 (May 17, 2018) (11 pages)
DOI: 10.1115/1.4039821

Mimic, D.; Jätz, C.; Herbst, F. (2018): Correlation between total pressure losses of highly loaded annular diffusers and integral stage design parameters, Journal of the Global Power and Propulsion Society. 2: 388-401
DOI: 10.22261/JGPPS.I9AB30

Mueller, J.-K.; Bensmann, A.; Bensmann, B.; Fischer, T.; Kadyk, T.; Narjes, G.; Kauth, F.; Ponick, B.; Seume, J.; Krewer, U.; Hanke-Rauschenbach, R.; Mertens, A. (2018): Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift Systems, Energies 11(1), 179
DOI: 10.3390/en11010179

Yalçın, Ö.; Cengiz, K.; Özyörük, Y. (2018): High-order detached eddy simulation of unsteady flow around NREL S826 airfoil, Journal of Wind Engineering and Industrial Aerodynamics
DOI: 10.1016/j.jweia.2018.05.017

Gilge, P.; Hohenstein, S.; Seume, J.R. (2017): Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine Blade, International Journal of Gas Turbine, Propulsion and Power Systems, October 2017, Volume 9, Number 3, pp.12-21

Hauptmann, T.; Aschenbruck, J.; Seume, J.R. (2017): Forced Response Excitation due to Stagger Angle Variation in a Multi-Stage Axial Turbine, International Journal of Gas Turbine, Propulsion and Power Systems, October 2017, Volume 9, Number 3

Koepplin, V.; Herbst, F.; Seume, J.R. (2017): Correlation-Based Riblet Model for Turbomachinery Applications, J. Turbomach 139(7), 071006, Feb 28, 2017,10 pages
DOI: 10.1115/1.4035605

Müller-Schindewolffs, C.; Baier, R.-D.; Seume, J.R.; Herbst F. (2017): Direct Numerical Simulation Based Analysis of RANS Predictions of a Low-Pressure Turbine Cascade, J. Turbomach 139(8), 081006, Mar 21, 2017,11 pages
DOI: 10.1115/1.4035834

Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R. (2017): Correcting Turbocharger Performance Measurements for Heat Transfer and Friction, J. Eng. Gas Turbines Power 140(2), 022301 (Oct 03, 2017) (9 pages)
DOI: 10.1115/1.4037586

Seume, J.R.; Peters, M.; Kunte, H. (2017): Design and test of a 10kW ORC supersonic turbine generator, Journal of Physics: Conference Series, Volume 821, Number 1, 12023
DOI: 10.1088/1742-6596/821/1/012023

Teichel, S.; Verstraete, T.; Seume, J.R. (2017): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift Systems, International Journal of Gas Turbine, Propulsion and Power Systems, June 2017, Volume 9, Number 2, pp. 19-26

Drechsel, B.; Seume, J.R.; Herbst, F. (2016): On the Numerical Prediction of the Influence of Tip Flow on Diffuser Stability, International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), December 2016, Volume 8, Number 3

Gilge, P.; Mulleners, K. (2016): Resulting Aerodynamic Losses of Combinations of Localized Roughness Patches on Turbine Blades, AIAA Journal, Vol. 54, No. 8 (2016), pp. 2552-2555
DOI: 10.2514/1.J054602

Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis, J. Eng. Gas Turbines Power 139(3), 031504 (Sep 27, 2016) (8 pages)
DOI: 10.1115/1.4034449

Hartmann, U.; Seume, J.R. (2016): Combining ART and FBP for Improved Fidelity of Tomographic BOS, Journal of Measurement Science and Technology, Vol. 27, No. 9, 097001 (10 pages)
DOI: 10.1088/0957-0233/27/9/097001

Schinnerl, M.; Seume, J.R.; Ehrhard, J.; Bogner, M. (2016): Heat Transfer Correction Methods for Turbocharger Performance Measurements, J. Eng. Gas Turbines Power 139(2), 022602 (Sep 13, 2016) (9 pages)
DOI: 10.1115/1.4034234

Wiegmann, B.; Seggern, H. von; Höffler, K.; Korossis, S.; Dipresa, D.; Pflaum, M.; Schmeckebier, S.; Seume, J.R.; Haverich, A.  (2016): Developing a biohybrid lung – sufficient endothelialisation of poly-4-methly-1-pentene gas exchange hollo-fiber membranes, Journal of the Mechanical Behaviour of Biomedical Materials, Vol. 60, July 2016, pages 301-311
DOI: 10.1016/j.jmbbm.2016.01.032

Aschenbruck, J.; Seume, J.R. (2015): Experimentally Verified Study of Regeneration-induced Forced Response in Axial Turbines, J. Turbomach 137(3), 031006 (Sep 30, 2014) (10 pages)
DOI: 10.1115/1.4028350

Grönmann, A.; Biester, M.; Turunen-Saaresti, T.; Jaatinen-Värri, A.; Backmann, J.; Seume, J.R. (2015): Importance of the Vane Exit Mach Number on the Axial-Clearance-Related Losses, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol 230, Issue 2, pp. 175 - 183
DOI: 10.1177/0957650915623087

Adamczuk, R.R.; Luehrmann, J.; Seume, J.R. (2014): Methodology for Evaluating Hot Gas Path Defects in an Exhaust Jet, Journal of Aerospace Science and Technology. December 2014, Vol. 39, pp. 120-127
DOI: 10.1016/j.ast.2014.08.011

Binner, M.; Seume, J.R. (2014): Flow Patterns in High Pressure Steam Turbines During Low-Load Operation, J. Turbomach 136(6), 061010 (Nov 21, 2013) (12 pages)
DOI: 10.1115/1.4025162

Freund, O.; Montgomery, M.; Mittelbach, M.; Seume, J.R.  (2014): Non-Contact Test Set-Up for Aeroelasticity in a Rotating Turbomachine Combining a Novel Acoustic Excitation System with Tip-Timing, Journal of Measurement Science and Technology Vol. 25, No. 3, 035008

Herbst, F.; Fiala, A.; Seume, J.R. (2014): Modeling Vortex Generating Jet-Induced Transition in Low-Pressure Turbines, J. Turbomach 136(7), 071005 (Jan 02, 2014) (16 pages)
DOI: 10.1115/1.4025735

Mulleners, K.; Gilge, P.; Hohenstein, S.  (2014): Impact of Surface Roughness on the Turbulent Wake Flow of a Turbine Blade, Journal of Aerodynamics, Vol. 2014, Article ID 458757, 9 pages
DOI: 10.1155/2014/458757

Teichel, S.H.; Dörbaum, M.; Misir, O.;Merkert, A.; Mertens, A.; Seume, J.R.; Ponick, B.  (2014): Design Considerations for the Components of Electrically Powered Active High-Lift Systems in Civil Aircraft, CEAS Aeronautical Journal: Volume 6, Issue 1 (2015), pp. 49-67
DOI: 10.1007/s13272-014-0124-1

Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.M.; Seume, J.R. (2013): Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies, J. Turbomach 135(3), 031033 (Mar 25, 2013) (9 pages)
DOI: 10.1115/1.4007511

Herbst, F.; Kozulovic, D.; Seume, J.R. (2013): Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine Profiles, J. Turbomach 135(1), 011038 (Oct 31, 2012) (8 pages)
DOI: 10.1115/1.4006421

Lietmeyer, C.; Denkena, B.; Krawczyk, T.; Kling, R.; Overmeyer, L.; Wojakowski, B.; Reithmeier, E.; Scheuer, R.; Vynnyk, T.; Seume, J.R. (2013): Recent Advances in Manufacturing of Riblets on Compressor Blades and their Aerodynamic Impact, J. Turbomach 135(4), 041008 (Jun 03, 2013) (12 pages)
DOI: 10.1115/1.4007590

Lietmeyer, C.; Oehlert, K.; Seume, J.R.  (2013): Optimal Application of Riblets on Compressor Blades and their Contamination Behaviour, J. Turbomach 135(1), 011036 (Oct 31, 2012) (10 pages)
DOI: 10.1115/1.4006518

Seume, J.R.; Pourshaghaghy, A. (2013): Estimation of Surface Heat Flux in the Wind Tunnel Cascade Blades, Scientific Journal for Fundamentals and Applications of Engineering Mechanicals, 2013, Vol. 33, Issue 1, pp. 52-66

Adamczuk, R.; Seume, J.R. (2012): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions, International Journal of Gas Turbine, Propulsion and Power Systems, June 2012, Volume 4, Number 2

Ernst, B.; Seume, J.R.  (2012): Investigation of Site-Specific Wind Field Parameters and Their Effect on Loads of Offshore Wind Turbines, Energies. 2012; 5(10):3835-3855, ISSN: 1996-1073
DOI: 10.3390/en5103835

Fischer, K.; Seume, J.R.  (2012): Thermo-Mechanical Stress in Tubular Solid Oxid Fuel Cells: Part I-Transient Operating Behavior and the Relevance of Material Creep, IET Renewable Power Generation(2012),6(3):177
DOI: 10.1049/iet-rpg.2011.0095

Fischer, K.; Seume, J.R.  (2012): Thermo-Mechanical Stress in Tubular Solid Oxide Fuel Cells: Part II-Operating Strategy for Reduced Probability of Fracture Failure, IET Renewable Power Generation, June 2012, Vol. 6, issue 3, pp. 194-205, ISSN: 1752-1424
DOI: 10.1049/iet-rpg.2011.0109

Mohseni, A.; Goldhahn, E.; Van den Braembussche, R. A.; Seume, J.R. (2012): Novel IGV Designs for Centrifugal Compressors and their Interaction with the Impeller, J. Turbomach 134(2), 021006 (Jun 22, 2011) (8 pages)
DOI: 10.1115/1.4003235

Shaaban, S.; Seume, J.R. (2012): Impact of Turbocharger Non-Adiabatic Operation on Engine Volumetric Efficiency and Turbo Lag, International Journal of Rotating Machinery, vol. 2012, Article ID 625453, 11 pages
DOI: 10.1155/2012/625453

Vorreiter, A.; Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R. (2012): Numerical Investigations of the Efficiency of Circulation Control in a Compressor Stator, J. Turbomach 134(2), 021012 (Jun 27, 2011) (11 pages)
DOI: 10.1115/1.4003286

Haslbeck, K.; Schwarz, K.; Hohlfeld, J.M.; Seume, J.R.; Koch, W. (2010): Submicron Droplet Formation in the Human Lung, Journal of Aerosol Science, Vol. 41, Issue 5, pp. 429-438
DOI: 10.1016/j.jaerosci.2010.02.010

Fischer, K.; Seume, J.R. (2009): Location and Magnitude of Heat Sources in Solid Oxide Fuel Cells, J. Fuel Cell Sci. Technol 6(1), 011002 (Nov 03, 2008) (11 pages)
DOI: 10.1115/1.2971042

Fischer, K.; Seume, J.R. (2009): Impact of the Temperature Profile on Thermal Stress in a Tubular Solid Oxide Fuel Cell, J. Fuel Cell Sci. Technol 6(1), 011017 (Nov 12, 2008) (9 pages)
DOI: 10.1115/1.2971132

Gomez, A.; Seume, J.R. (2009): Load Pulses on Wind Turbine Structures Caused by Tower Interference., Wind Engineering, Vol. 33, Issue 6, pp. 555-570

Nouri-Borujerdi, A.; Ziaei-Rad, M.; Seume, J.R. (2009): Numerical Simulation of Developing Compressible Turbulent Flow with Heat Transfer, Journal of Thermophysics and Heat Transfer, Vol. 23, No. 4 (2009), pp. 801-809.
DOI: 10.2514/1.41669

Hellmich, B.; Seume, J.R. (2008): Causes of Acoustic Resonance in a High-Speed Axial Compressor, J. Turbomach 130(3), 031003 (May 02, 2008) (9 pages)
DOI: 10.1115/1.2775487

Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R. (2008): Improved Diffuser / Volute Combinations for Centrifugal Compressors, J. Turbomach 130(1), 011014 (Jan 25, 2008) (9 pages)
DOI: 10.1115/1.2749296

Goldhahn, E.; Seume, J.R. (2007): The Background Oriented Schlieren Technique: Sensitivity, Accuracy, Resolution and Application to a Three-Dimensional Density Field, Experiments in Fluids, Vol. 43, Issue 2-3, pp. 241-249
DOI: 10.1007/s00348-007-0331-1

Riess, W.; Shieh, T.-H. (2005): Untersuchung einer Axialturbinen-Stufe mit tangential gekrümmten Leitschaufeln, Teil I: Strömungsstruktur im Leitradkanal, Forschung im Ingenieurwesen, Band 69, Heft 3, June 2005, S. 151-162
DOI: 10.1007/s10010-004-0143-x

Riess, W.; Shieh, T.-H.  (2005): Untersuchung einer Axialturbinen-Stufe mit tangential gekrümmten Leitschaufeln, Teil II: Modellierung für Throughflow-Rechenverfahren, Forschung im Ingenieurwesen, Band 69, Heft 3, June 2005, S. 163-169
DOI: 10.1007/s10010-004-0144-9

Fischer, A; Rieß, W; Seume, J.R. (2004): Performance of Strongly Bowed Stators in a Four-Stage High Speed Compressor, J. Turbomach 126(3), 333-338 (Sep 03, 2004) (6 pages)
DOI: 10.1115/1.1649743

Levy, Y.; Pismenny J.; Reissner, A; Riess, W (2002): Relationship between Frequencies of Pressure Oscillations and Rotating Stall in Axial Compressors, International Journal of Turbo and Jet- Engines, Vol. 19, Issue 4, pp. 233-247
DOI: 10.1515/TJJ.2002.19.4.233

Hasemann, H.; Hagelstein, D.; Rautenberg, M. (2000): Coupled Vibration of Unshrouded Centrifugal Compressor Impellers, Part 2: Computation of Vibration Behavior, International Journal of Rotating Machinery, vol. 6, no. 2, pp. 115-128, 2000
DOI: 10.1155/S1023621X00000117

Hasemann, H.; Hagelstein, D.; Rautenberg, M. (2000): Coupled Vibration of Unshrouded Centrifugal Compressor Impellers, Part 1: Experimental Investigation, International Journal of Rotating Machinery, vol. 6, no. 2, pp. 101-113, 2000.
DOI: 10.1155/S1023621X00000105

Sentker, A.; Riess, W. (2000): Experimental Investigation of Turbulent Wake-Blade Interaction in Axial Compressors, International Journal of Heat and Fluid Flow, Vol. 21, pp. 285-290

Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A. (1998): Application of Active Combustion Instability Control to a Heavy Duty Gas Turbine, Journal of Engineering for Gas Turbines and Power, Vol. 120, Issue 4, pp. 721-726

Engeda, A.; Rautenberg, M. (1987): Comparisons of the Relative Effect of Tip Clearance on Centrifugal Impellers, Journal of Turbomachinery, October 1987, Vol. 109, Issue 4, 545-549 (5 pages)

Internationale wissenschaftliche Beiträge in Fachzeitschriften, nicht begutachtet

Flinte, J.; Eilts, P.; Willers, O.; Seume, J.R. (2020): Extension of the Characteristic Map of a TC Compressor by active Cross-Section Variation, MTZ worldwide, S. 68-72
DOI: https://doi.org/10.1007/s38313-019-0166-1
ISBN: Electronic ISSN: 2192-9114

Henke, M.; Rätz, H.; Fleige, H.-U.; Seume, J.R.  (2019): Preparation of Acceptance Tests for a New Turbomachinery Test Facility , 9th EVI-GTI International Gas Turbine Instrumentation Conference, 20th and 21th Nov 2019 , Graz, Austria

Menze, M.; Schödel, M.; Willers, O.; Seume, J. R.; (2019): Brennstoffzellensysteme im Straßenverkehr als Antriebskonzept für die Mobilität der Zukunft, Journal für Mobilität und Verkehr, Ausgabe 3
ISBN: 2628-4154

Willers, O.W.; Kunte, H.; Seume, J.R. (2017): ORC turbine-generator unit for truck applications, Automobiltechnische Zeitschrift (ATZ) Worldwide, Vol. 119, October 2017, pages 58-61, Springer, Wiesbaden
DOI: 10.1007/s38311-017-0095-z

Hohenstein, S.; Aschenbruck, J.; Seume, J.R (2013): Einfluss betriebs- und regenerationsbedingter Varianzen von Turbinenschaufeln, International Journal for Electricity and Heat Generation VGB PowerTech (11), S. 51-58, 2013

Kuschel, M.; Seume, J.R. (2010): Influence of the wakes of Rotating Spokes on the Performance of a Turbine Exhaust Diffuser, Journal of Thermal Science, Vol. 19, Issue 3, pp. 206-210

Lietmeyer, C.; Gündogdu, Y.; Kleppa, O.; Oehlert, K.; Vorreiter, A.; Seume, J. (2009): Zukunftsperspektiven für die Hochtemperaturgasturbine, VGB PowerTech, Band 89, Heft 10/2009, S. 48-55 auch veröffentlicht auf der VGB Fachtagung Gasturbinen und Gasturbinenbetrieb, 24-25 Juni 2009, Mannheim

Sieker, O.; Seume, J.R. (2008): Influence of Rotating Wakes on Separation in Turbine Exhaust Diffusers, Journal of Thermal Science, Vol. 17, Issue 1, pp. 42-49
DOI: 10.1007/s11630-008-0042-9

Pietrasch, R.Z.; Seume, J.R. (2005): Interaction between Struts and Swirl Flow in Gas Turbine Exhaust Diffusers, J. of Thermal Science Vol. 14, No.4, pp. 314-320

Petrovic, M.; Gehring, S; Rieß, W. (2001): 2D-Verfahren zur Auslegung, Optimierung und Kennfeldberechnung von Gas- und Dampfturbinen, VGB PowerTech, Band 81, Heft 1 1/2001, S. 52-57

Internationale Konferenzbeiträge, begutachtet

Alldieck, R.; Seehausen, H.; Herbst, F.; Seume, J. R. (2020): The Effect of Rough-Wall Boundary Condition on RANS-Based Transition Prediction, Proceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0053
DOI: 10.33737/gpps20-tc-53

Goeing, J.; Seehausen, H.; Herbst, F.; Bode, C.; Friedrichs J.; Seume, J. R. (2020): Performance simulation of roughness induced module variations of a jet propulsion by using pseudo bond graph theory, Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, GT2020-14456

Goeing, J.; Seehausen, H.; Pak, V.; Lueck, S.; Friedrichs J.; Seume, J. R.  (2020): Influence of combined compressor and turbine deterioration on the overall performance of a jet engine using RANS simulation and pseudo bond graph approach, Proceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0140
DOI: 10.33737/gpps20-tc-140

Kluge, T.; Lettmann, I.; Oettinger, M.; Wein, L.; Seume, J. R. (2020): Unsteady Flow Phenomena in Turbine Shroud Cavities, Proceedings of the Global Power and Propulsion Society, Global Power and Propulsion Society, GPPS-CH-2020-0064
ISBN: ISSN-Nr: 2504-4400

Lehnhoff, S.; Kidambi S.A.P.; van Dooren, M.F.; Kühn, M.; Seume, J.R. (2020): Full scale rotor blade deformation measurements in comparison with aeroelastic simulations based on measured high-resolution wind fields, The Science of Making Torque from Wind (TORQUE 2020), Journal of Physics: Conference Series, Vol. 1618, Delft, Netherlands
DOI: 10.1088/1742-6596/1618/5/052036

Lohse, S.; Fischer, F.; Koch, R.; Moreau, S.; Seume, J.R. (2020): Aeroacoustic Numerical Investigations of a scaled Compressor Cascade, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0094
DOI: 10.33737/gpps20-tc-94

Nachtigal, P.; Rätz, H.; Mai, H.; Seume, J.R. (2020): Design and validation of a pulse generator for the pulse shaping of the turbine inlet pressure at the hot-gas test bench, 14th International Conference on Turbochargers and Turbocharging, Institution of Mechanical Engineers, CRC Press, S. 48-61
DOI: 10.1201/9781003132172
ISBN: 978-0-367-67645-2

Oettinger, M.; Henke, M.; Seume, J. R.  (2020): Effect of Diffusor Inhomogeneity on Full-Annulus Axial Turbine Performance, Proceedings of the Global Power and Propulsion Society (GPPS) Chania Conference, 7-9 September, 2020, Chania, Greece. Global Power and Propulsion Society. Paper GPPS-CH-2020-0139

Schmid, M; Seume, J.R. (2020): Design of an aerofoil for small wind turbines with a focus on turbulent inflow conditions, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0066

Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R. (2020): Mehr Effizienz durch kleinere Spalte – Untersuchungen zur Druckverteilung im Radrückraum eines schnelllaufenden Radialverdichters., Pumpen und Kompressoren für den Weltmarkt 2020, VDMA-Verlag, pp. 66-72

Wang, P.; Vera-Morales, M.; La, P.; Zangeneh, M.; Maroldt, N.; Willers, O.; Kauth, F.; Seume, J.R. (2020): Design of a Mixed-Flow Transonic Compressor for Active High-Lift System Using a 3D Inverse Design Methodology, Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, September 21-25, 2020, Virtual, Online, GT2020-15645

Wein, L.; Kluge, T.; Hain, R.; Fuchs, T.; Kähler, C.; Schmierer, R.; Herbst, F.; Seume, J. R. (2020): Validation of RANS Turbulence Models for Labyrinth Seal Flows by Means of Particle Image Velocimetry, Proceedings of ASME Turbo Expo 2020, 21.-25.September, 2020, London, UK, Paper, GT2020-14885

Zeh, C.; Willers, O.; Hagemann, T.; Schwarze, H.; Seume, JR.  (2020): Evaluation of the Rotor Temperature Distribution of an Automotive Turbocharger Under Hot Gas Conditions Including Indirect Experimental Validation, Proceedings of ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, GT2020, June 22-26, 2020, London, England, GT2020-14972

Ziaja, K.; Post, P.; Sembritzky, M.; Schramm, A.; Willers, O.; Kunte, H.; di Mare, F.; Seume, J.R. (2020): Numerical Investigation of a Partially Loaded Supersonic ORC Turbine Stage, Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, GT2020-15645, September 21-15, 2020

Zieße, M.; Wein, L.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R. (2020): Validation of a Synthetic-Eddy Method for Modelling Incoming Wakes in Scale-Resolving Simulations of Turbomachinery Cascades, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th– 9th September, 2020, GPPS-CH-2020-0017
DOI: 10.33737/gpps20-tc-17

Kauth, F.; Maroldt, N.; Seume, J. R.; (2019): Experimental validation of a compact mixed-flow compressor for an active high-lift system , IOP Conference Series: Materials Science and Engineering: Volume 643, Number 1
DOI: https://doi.org/10.1088/1757-899X/643/1/012142

Kluge, T.; Wein, L.; Schmierer, R.; Seume, J.R. (2019): Sensitivity Analysis, Design, Instrumentation, and Experimental Validation of a Novel Labyrinth Seal Rig., Proceedings of the ETC 13, European Turbomachinery Society

Mimic, D.; Herbst, F. (2019): Influence of Transonic Flow on the Tip-Leakage Vortex in a Turbine Cascade, Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-082

Mimic, D.; Oettinger, M.; Jätz, C.; Herbst, F.; Seume, J. R. (2019): Thermal End-Wall Contouring, Proceedings of ASME Turbo Expo 2019, 17–21 June 2019, Phoenix, USA, GT2019-90191
DOI: 10.1115/GT2019-90191

Mimic, D.; Oettinger, M.; Sauer, P.; Herbst, F. (2019): Shock–Vortex Interaction in a Transonic Turbine Cascade, Proceedings of Global Power and Propulsion Society (GPPS) Beijing Conference 2019, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0008
DOI: 10.33737/gpps19-bj-008

Oettinger, M.; Henke, M.; Herbst, F.; Seume, J. R.  (2019): Axial-Gap Size Effect on the Unsteady Flow Field at Midspan in a 1.5-Stage Low-Pressure Turbine, Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-084

Oettinger, M.; Mimic, D.; Henke, M.; Schmunk, O.; Seume, J. R. (2019): Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure Turbine, Proceedings of Global Power and Propulsion Society (GPPS) Beijing Conference, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0207
DOI: 10.33737/gpps19-bj-207

Schwarzbach, F.; Mimic, D.; Herbst, F. (2019): Profile Aerodynamics of an Oscillating Low-Pressure–Turbine Blade, Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-048

Seehausen, H.; Gilge, P.; Kellersmann, A.; Friedrichs, J.; Herbst, F. (2019): Numerical Study of Stage Roughness Variations in a High Pressure Compressor, Proceedings of the International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan, IGTC-2019-062
ISBN: 978-4-89111-010-9

Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J. (2019): Analytical, Experimental and Numerical Investigations on the Impeller Backplane Pressure Distribution of a High-Speed Centrifugal Compressor, 4th International Rotating Equipment Conference (IREC), Wiesbaden

Zieße, M.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R.  (2019): Enhanced Synthetic-Eddy-Method for Generating Moving Incoming Wakes and Turbulence in Scale-Resolving Simulations, Proceedings of the International Gas Turbine Congress 2019, 17–22 November 2019, Tokyo, Japan, 66

Fischer, T.; kleine Sextro, T.; Seume, J.R.; Flinte, J.; Eilts, P. (2018): Flow range of variable cross-section compressors, Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK

Fischer, T.; Willers, O.W.; Seume, J.R.  (2018): Preliminary Design of a Partial Admission Turbine for the Waste Heat Recovery in Fuel Cells, Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK

Frieling, D.; Griebel, A.; Wein, L.; Seume, J.R.; Herbst, F. (2018): The Influence of Rotor-Wakes on Boundary Layer Development in an Axial Compressor and its Numerical Prediction, Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75631

Hartmann, U.; Seume, J.R. (2018): Automated Condition Evaluation of Hot-Gas Path Components of Jet Engines through Exhaust Jet Analysis, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75384

Hartung, K.; Gilge, P.; Herbst, F. (2018): Towards Immersed Boundary Methods for Complex Roughness Structures in Scale-Resolving Simulations , 32^nd European Conference on Modelling and Simulation (ECMS 2018), 22-25 May 2018, Wilhelmshaven, Germany
ISBN: 78-0-9932440-6-3

Hauptmann, T.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of Forced Response Methods in a Multi-Stage Axial Turbine, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75390
DOI: 10.1115/GT2018-75390
ISBN: 978-0-7918-5115-9

Kauth, F.; Narjes, G.; Müller, J.-K.; Mertens, A.; Ponick, B.; Seume, J.R. (2018): Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future Aircraft, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0026
DOI: 10.5281/zenodo.1342725

Maehler, L.; Willeke, T.; Seume, J.R. (2018): Numerical Prediction of the Notch Effect of Riblets on Axial Compressor Blades, Proceedings of the Global Power and Propulsion Forum (GPPF), GPPS, 07-09 May 2018, Montreal, Canada, GPPS-2018-0025
DOI: 10.5281/zenodo.1342723

Meinzer, C.E.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J.R. (2018): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine Shafts , Proceedings of the Global Power & Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 10-12 January 2018, Zurich, Switzerland, GPPS-2018-0016

Mimic, D.; Jätz, C.; Herbst, F. (2018): Increasing Boundary Layer Stability for Varying Degrees of Diffuser Loading, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0006
DOI: 10.5281/zenodo.1345494

Mimic, D.; Jätz, C.; Sauer, P.; Herbst, F. (2018): Total Pressure Loss Reduction in Annular Diffusers, Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS01

Müller-Schindewolffs, C.; Herbst, F.  (2018): The Effect of Turbulent Scales on Low-Pressure Turbine Aerodynamics - Part A: An optimized Turbulent Boundary-Condition, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Lillestrøm, Norway, GT2018-75162

Schwarzbach F.; Müller-Schindewolffs Ch.; Bode, Ch.; Herbst, F. (2018): Effect of the Turbulent Scales on Low-Pressure Turbine Cascade Aerodynamics Part B: Scale Resolving Simulations, Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75163

Wein, L.; Seume, J.R.; Herbst, F. (2018): Unsteady Flow in a Labyrinth Seal, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-NA-2018-0036

Bode, C.; Friedrichs, J.; Frieling, D.; Herbst, F. (2017): Improved Turbulence Prediction in Turbomachinery Flows and The Effect on Three-Dimensional Boundary Layer Transition, International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ISROMAC 2017, 16-21 December, 2017, Maui, Hawaii
DOI: 10.3390/ijtpp3030018

Du, J.; Seume, J.R. (2017): Design of Casing Treatment on a Mixed-Flow Compressor, Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-65226
DOI: 10.1115/GT2017-65226
ISBN: 978-0-7918-5078-7

Fischer, T.; Burgmann, S.; Rudersdorf, M.; Seume, J.R. (2017): Partially Vaned Diffuser With Variable Cross-Section for Centrifugal Fans, Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-63965
DOI: 10.1115/GT2017-63965
ISBN: 978-0-7918-5077-0

Keller, C.; Kellersmann, A.; Friedrichs, J.; Seume, J.R. (2017): Influence of Geometric Imperfections on Aerodynamic and Aeroelastic Behavior of a Compressor Blisk , Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-63556
DOI: 10.1115/GT2017-63556

Mimic, D.; Drechsel, B.; Herbst, F. (2017): Correlation between Pressure Recovery of Highly Loaded Annular Diffusers and Integral Stage Design Parameters, Proceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-63586
DOI: 10.1115/GT2017-63586

Mimic, D.; Jätz, C.; Herbst, F. (2017): Correlation between Total Pressure Losses of Highly Loaded Annular Diffusers and Integral Stage Design Parameters, Proceedings of Shanghai 2017 Global Power and Propulsion Forum, 30 October – 1 November, 2017, Shanghai, China, GPPS-2017-0063

Miro, S.; Broggi, M.; Beer, M.; Willeke, T.; Seume, J.R. (2017): Survival Signature Approach for the Reliability Analysis of an Axial Compressor, 27^th European Safety and Reliability Conference ESREL, 18 – 22 June 2017, Portorož, Slovenia

Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R. (2017): Correcting Turbocharger Performance Measurements for Heat Transfer and Friction, Proceedings of the ASME Turbo Expo 2017, 26-30 June 2017, Charlotte, NC, USA, GT2017-64283
DOI: 10.1115/GT2017-64283
ISBN: 978-0-7918-5095-4

Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J.; Berger, R.; Rolfes, R.; Keller, C.; Seume, J.R. (2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and Mistuning, Proceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142, 2017, GPPS-2017-0142

Wein, L.; Seume, J.R.; Herbst, F. (2017): Improved Prediction of Labyrinth Seal Performance through Scale Adaptive Simulation and Stream Aligned Grids, Proceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-64257
DOI: 10.1115/GT2017-64257

Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction, Proceedings of 12^th European Conference on Fluid Dynamics & Thermodynamics, April 3-7, Stockholm, Sweden, ETC2017-242
DOI: 10.29008/ETC2017-242

Willeke, T.; Hellberg, M.; Seume, J.R. (2017): A Numerical Concept Study on Internal Blade Cooling in Axial Compressors, Proceedings of the ETC 12, 3-7 April 2017, Stockholm, Sweden, ETC2017-106
DOI: 10.29008/ETC2017-106

Willers, O.W.; Kunte, H; Seume, J.R. (2017): Supersonic Impulse Turbine for Organic Rankine Cycle (ORC) Truck Applications, 26th Aachen Colloquium Automobile and Engine Technology, 9-11 October 2017, Aachen; proceedings pp. 1557-1570, Aachener Kolloquium Fahrzeug- und Motorentechnik GbR, Aachen
ISBN: 978-3-00-054182-7

Adamczuk, R.R.; Seume, J.R. (2016): Numerical Evaluation of the Condition of a Jet Engine Through Exhaust Jet Analysis, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56947
DOI: 10.1115/GT2016-56947
ISBN: 978-0-7918-4970-5

Ernst, B.; Seume, J.R.; Herbst, F.  (2016): Effect of Turbulence and Transition Models on the CFD-based Performance Prediction of Wind Turbines , Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56728
DOI: 10.1115/GT2016-56728
ISBN: 978-0-7918-4987-3

Fischer, T.; Raetz, H.; Peters, M.; Seume, J.R. (2016): Low inertia centrifugal compressor wheels: Influence of back disk cavity on aerodynamic losses and axial thrust load, Proceedings of 12^th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, UK
DOI: 10.1177/1687814017690695

Fischer, T.; Rudersdorf, M.; Burgmann, S.; kleine Sextro, T.; Seume, J.R. (2016): Investigation of a Diffuser-Volute Combination with Variable Cross-Sectional Area for Centrifugal Fans , Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56299
DOI: 10.1115/GT2016-56299
ISBN: 978-0-7918-4968-2

Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56467
DOI: 10.1115/GT2016-56467
ISBN: 978-0-7918-4982-8

Hauptmann, T.; Seume, J.R. (2016): Aerodynamic Excitation for Variable Tip Gap, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Corea, GT2016-57217
DOI: 10.1115/GT2016-57217
ISBN: 978-0-7918-4984-2

Henke, M.; Wein, L.; Kluge, T.; Biester, M.H.-O.; Guendogdu, Y.; Seume, J.R. (2016): Experimental and Numerical Verification of the Core-Flow in a New Low-Pressure Turbine, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57101
DOI: 10.1115/GT2016-57101
ISBN: 978-0-7918-4970-5

Hurfar, C.M.; Keller, C.; Mumcu, A.; Seume, J.R.  (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 2: Experimental Verification, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56969
DOI: 10.1115/GT2016-56969
ISBN: 978-0-7918-4969-9

kleine Sextro, T.; Lübbert, N.; Rätz, H.; Seume, J.R. (2016): Heat Flow In a Turbocharger Shaft and its Impact on the Bearing System, Proceedings of the 12^th International Conference on Turbochargers and Turbocharging (IMECHE), 17-18 May, London, England, C6231/110

Koepplin, V.; Herbst, F.; Seume, J.R. (2016): Correlation-based Riblet Model for Turbomachinery Applications, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56293
DOI: 10.1115/GT2016-56293

Kunte, H.; Seume, J.R. (2016): Design of a turbine-generator-unit for commercial vehicle ORC applications, Proceedings of 12^th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, C6231-155

Müller, C.; Baier, R.-D.; Seume, J.R.; Herbst, F. (2016): DNS-Based Analysis of RANS Predictions of a Low-Pressure Turbine Cascade, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57582
DOI: 10.1115/GT2016-57582
ISBN: 978-0-7918-4971-2

Mumcu, A.; Keller, C.; Hurfar, C. M.; Seume, J.R.  (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 1: Design and Methodology, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56020
DOI: 10.1115/GT2016-56969
ISBN: 978-0-7918-4969-9

Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Kauth, F.; Seume, J.R. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift Systems, ESARS-ITEC Conference, 2-4 November 2016, Toulouse, France
DOI: 10.1109/ESARS-ITEC.2016.7841338

Schinnerl, M.; Seume, J.R.; Ehrhard, J.; Bogner, M. (2016): Heat Transfer Correction Methods for Turbocharger Performance Measurements, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56770
DOI: 10.1115/GT2016-56770
ISBN: 978-0-7918-4986-6

Schwerdt, L.; Hauptmann, T.; Kunin, A.; Wallascheck, J.; Wriggers, P.; Panning-von Scheidt, L.; Löhnert, S.; Seume, J.R.  (2016): Aerodynamical and Structural Analysis of Operationally used Turbine Blades, 5^th International Conference on Through-life Engineering Servies, 1-2 November 2016, Cranfield, England
DOI: 10.1016/j.procir.2016.09.023

Siemann, J.; Krenz, I.; Seume, J.R. (2016): Experimental Investigation of Aspiration in a Multi-Stage High-Speed Axial-Compressor, Proceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-56440
DOI: 10.1115/GT2016-56440
ISBN: 978-0-7918-4969-9

von der Haar, H.; Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Defect Detection in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases, Proceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-57847
DOI: 10.1115/GT2016-57847
ISBN: 978-0-7918-4982-8

Winstroth, J.; Seume, J.R. (2016): On the Influence of Airfoil Deviations on the Aerodynamic Performance of Wind Turbine Rotors, Journal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 022058
DOI: 10.1088/1742-6596/753/2/022058

Wolff, T.; Seume, J.R. (2016): Modeling the Transient Aerodynamic Effects During the Motion of a Flexible Trailing Edge, Journal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 082038
DOI: 10.1088/1742-6596/753/8/082038

Aschenbruck, J.; Hauptmann, T.; Seume, J.R.  (2015): Influence of Multi-Hole Pressure Probes on the Flow-Field in Axial-Turbines, Proceedings of 11^th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-155

Brand, C.R.; Seume, J.R. (2015): Flaps for Wind Turbine Applications: Results of an Acoustic Study, Proceedings of the EWEA Annual Event, 17-20 November 2015, Paris, France

Denkena, B.; Böß,V.; Nespor, D.; Gilge, P.; Hohenstein, S.; Seume, J.R.  (2015): Prediction of the 3D Surface Topography after Ball End Milling and its Influence on Aerodynamics , Conference on Modelling of Machining Operations (15^th CMMO), 11-12 Juni, Karlsruhe, Germany
DOI: 10.1016/j.procir.2015.03.049

Drechsel, B.; Müller, C.; Herbst, F.; Seume, J.R. (2015): Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part B: Scale-Resolving Simulations, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42477
DOI: 10.1115/GT2015-42477
ISBN: 978-0-7918-5663-5

Drechsel, B.; Seume, J.R.; Herbst, F.  (2015): On the Numerical Prediction of the Influence of Tip Flow on Diffuser Stability, Proceedings of the International Gas Turbine Congress 2015, November 15-20, 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Fischer, T.; Peters, M.; Seume, J.R. (2015): Low Inertia Centrifugal Compressor Wheels: Back Disk Geometry Optimization, Proceedings of the International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Flores, D.; Seume, J.R. (2015): The Influence of Labyrinth Flows on the Aerodynamic Performance of an Axial Compressor, Proceedings of 11^th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-117

Hartmann, U.; Seume, J.R. (2015): Application of an Algebraic Reconstruction Algorithm to Tomographic BOS Measurements, Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Hauptmann, T.; Aschenbruck, J.; Seume, J.R. (2015): Forced Response Excitation due to Variances in a Multi-Stage Axial Turbine, Proceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Hohenstein, S.; Gilge, P.; Seume, J.R.  (2015): Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine Blade, Proceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan, IGTC2015-0078
ISBN: 978-4-89111-008-6

Hurfar, M.; Bartelt, M.; Seume, J.R. (2015): A Scaling Method for Modal Sound Propagation in Annular Ducts, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-42839
DOI: 10.1115/GT2015-42839
ISBN: 978-0-7918-5664-2

Keller, C.; Willeke, T.; Burrafato, S.; Seume, J.R. (2015): Design Process of a 1.5-Stage Axial Compressor for Experimental Flutter Investigations, Proceedings of the International Gas Turbine Congress, 15-20 November 2015, Tokyo, Japan, IGTC2015-0141
ISBN: 978-4-89111-008-6

kleine Sextro, T.; Steglich, T.; Seume, J.R. (2015): Variable Inlet Guide Vane Devices for a Turbocharger Compressor, Proceedings of International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan, IGTC2015-0161
ISBN: 978-4-89111-008-6

Kluge, T.; Henke, M.; Seume, J.R. (2015): Comparison of Different Methods for the Analysis of Time-Resolved Flow Field Measurements in an Axial Turbine, Proceedings of the ETC 11, 23-26 March 2015, Madrid, Spain, ETC2015-189

Kunte, H.; Seume, J.R.; Pautov, D.; Cherkasova, M.; Zabelin, N.; Olennikov, S.; Rassokhin, V. (2015): Supersonic Impulse Turbine for Automotive Waste Heat Recovery: A Comparison of three Designs of Turbine Blade Profiles, 11^th European Turbomachinery Conference, 23-27 March 2015, Madrid, Spain, ETC2015-092

Kuschel, M.; Drechsel, B.; Kluß, D.; Seume, J.R. (2015): Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part A: Experimental Results, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42476
DOI: 10.1115/GT2015-42476
ISBN: 978-0-7918-5663-5

Meinzer, C.; Bittner, S.L.; Schmitt, S.; Kielb, R.E.; Seume, J.R. (2015): Design of a Single Stage Turbine for the Quantification of Aerodynamic Damping, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42641
DOI: 10.1115/GT2015-42641
ISBN: 978-0-7918-5677-2

Müller, C.; Herbst, F.; Fiala, A.; Zscherp, C.; Kügeler, E.; Seume, J.R.  (2015): Parameter Study for an Improved Prediction of Wake-Induced Transition in Low-Pressure Turbines, Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan, IGTC2015-0043
ISBN: 978-4-89111-008-6

Siemann, J.; Seume, J.R. (2015): Design of an Aspirated Compressor Stator by Means of DOE, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42474
DOI: 10.1115/GT2015-42474
ISBN: 978-0-7918-5663-5

Teichel, S.; Verstraete, T.; Seume, J.R. (2015): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift Systems, Proceedings of the International Gas Turbine Congress 2015, 15-20 November, Tokyo, Japan
ISBN: 978-4-89111-008-6

Von Seggern, H.; Seume, J.R.; Vorreiter, A. (2015): Measuring the Dynamic Thinning Process of Free Fluid Films with LED-IF, Proceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows,13-16 July 2015, Lerici, Italy, ISAIF12-093

Vorreiter, A. (2015): Feasibility Study on a Single-Stage Tandem Axial Compressor for an Active High-Lift-System, Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Vorreiter, A; Seume, J.R. (2015): Effects of Circulation Control on a Multi-Stage Axial Compressor, Proceedings of the 12^th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows,13-16 July 2015, Lerici, Italy, ISAIF12-094

Winstroth, J.; Seume, J.R. (2015): Error Assessment of Blade Deformation Measurements on a Multi-Megawatt Wind Turbine Based on Digital Image Correlation, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-43622
DOI: 10.1115/GT2015-43622
ISBN: 978-0-7918-5680-2

Aschenbruck, J.; Adamczuk, R.; Seume, J.R.  (2014): Recent Progress in Turbine Blade and Compressor Blisk Regeneration, 3^rd International Through-life Engineering Services Conference, EPSRC Centres for Innovative Manufacturing, 4-5 November 2014, Cranfield, England
DOI: 10.1016/j.procir.2014.07.016

Aschenbruck, J.; Seume, J.R. (2014): Experimentally Verified Study of Regeneration-Induced Forced Response in Axial Turbines., Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25664
DOI: 10.1115/GT2014-25664
ISBN: 978-0-7918-4577-6

Ernst, B.; Schmitt, H.; Seume, J.R. (2014): Effect of Geometric Uncertainties on the Aerodynamic Characteristic of Offshore Wind Turbine Blades, The Science of Making Torque from Wind 2012, Journal of Physics: Conference Series, Oldenburg, Germany
DOI: 10.1088/1742-6596/555/1/012033

Flores, D.; Seume, J.R. (2014): Selecting Cavity Geometries for Improving the Aerodynamic Performance of an Axial Compressor, Proceedings of the ASME Turbo Expo 2014, 16-20 June 2014, Düsseldorf, Germany, GT2014-25328
DOI: 10.1115/GT2014-25328
ISBN: 978-0-7918-4560-8

Pohle, L.; Aschenbruck, J.; Panning- von Scheidt, L.; Seume, J.R.; Wallaschek, J. (2014): Dynamic Behaviour of a Mistuned Air Turbine: Comparison between simulations and measurements, Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-26025
DOI: 10.1115/GT2014-26025
ISBN: 978-0-7918-4577-6

Porzig, D.; Raetz, H.; Schwarze, H.; Seume, J.R. (2014): Thermal Analysis of Small high-speed floating-ring Journal bearings, Proceedings of 11^th International Conference on Turbochargers and Turbocharging (IMechE), 13-14 May 2014, London, UK

Winstroth, J.; Schön, L.; Ernst, B.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: A Comparison to Aeroelastic Simulations of a Multi-Megawatt Wind Turbine , The Science of Making Torque from Wind 2014, Journal of Physics: Conference Series, 18-20 June 2014, Copenhagen, Denmark
DOI: 10.1088/1742-6596/524/1/012064

Witthaus, S.; Seume, J.R.  (2014): Boundary Condition for the Implementation of Arbitrary Acoustical Modes, inter.noise 2014, 43^rd International Congress on Noise Control Engineering, 16-19 November 2014, Melbourne, Australia

Wolff, T.; Ernst, B.; Seume, J.R.  (2014): Aerodynamic Behavior of an Airfoil with Morphing Trailing Edge for Wind Turbine Applications, The Science of Making Torque from Wind 2014, 18-20 June 2014, Copenhagen, Denmark
DOI: 10.1088/1742-6596/524/1/012018

Wolff, T.; Herbst, F.; Freund, O.; Le, L.; Seume, J.R. (2014): Validating the Numerical Prediction of the Aerodynamics of an Axial Compressor, Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25530
DOI: 10.1115/GT2014-25530
ISBN: 978-0-7918-4561-5

Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Impact of Defects and Damage in Aircraft Engines on the Exhaust Jet, Proceedings of the ASME Turbo Expo, ASME, 3-7 June 2013, San Antonio, USA, GT2013-95709
DOI: 10.1115/GT2013-95079
ISBN: 978-0-7918-5513-3

Adamczuk, R.; Hartmann, U.; Seume, J.R. (2013): Experimental Demonstration of Analyzing an Engine’s Exhaust Jet with the Background-Oriented Schlieren Method, AIAA Ground Testing Conference, 24-27 June 2013, San Diego, USA

Adamczuk, R.; Seume, J.R. (2013): Early Assessment of Defects and Damage in Jet Engines, 2^nd International Through-life Engineering Services Conference, 2013, Cranfield, England
DOI: 10.1016/j.procir.2013.07.022

Aschenbruck, J.; Meinzer, C.E.; Pohle, L.; Panning-von Scheidt, L.; Seume, J.R. (2013): Regeneration-Induced Forced Response in Axial Turbines, Proceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95431
DOI: 10.1115/GT2013-95431
ISBN: 978-0-7918-5527-0

Aschenbruck, J.; Meinzer, C.E.; Seume, J.R.  (2013): Influence of Regeneration-Induced Variances of Stator Vanes on the Vibration Behavior of Rotor Blades in Axial Turbines, Proceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-113

Bartelt, M.; Laguna, J.D.; Seume, J.R. (2013): Synthetic Sound Source Generation for Acoustical Measurements in Turbomachines, Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95045
DOI: 10.1115/GT2013-95045
ISBN: 978-0-7918-5524-9

Belz, J.; May, M.; Siemann, J.; Seume, J.R.; Voigt, C.; Boehmer, H.; Grueber, B. (2013): Excited Blade Vibration for Aeroelastic Investigations of a Rotating Blisk using Piezo-Electric Macro Fiber Composites, Proceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA, GT2013-95735
DOI: 10.1115/GT2013-95735
ISBN: 978-0-7918-5527-0

Biester, M. H.-O.; Karapetrow, D.;Seume, J.R. (2013): Effect of the Tip Clearance on End Wall Heat-Transfer in a HP Turbine, Proceedings of the ASME Turbine Blade Tip Symposium, 30 September - 3 October 2013, Hamburg, Germany, TBTS2013-2069
DOI: 10.1115/TBTS2013-2069
ISBN: 978-0-7918-5607-9

Biester, M. H.-O.; Wiegmann, F.; Guendogdu, Y.;Seume, J.R. (2013): Time-Resolved Numerical Study of Axial Gap Effects on Labyrinth-Seal Leakage and Secondary Flow in a LP Turbine, Proceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95628
DOI: 10.1115/GT2013-95628
ISBN: 978-0-7918-5522-5

Herbst, F.; Fiala, A.; Seume, J.R. (2013): Modelling Vortex Generating Jet-Induced Transition in Low-Pressure Turbines, Proceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, USA, GT2013-94962
DOI: 10.1115/GT2013-94962
ISBN: 978-0-7918-5523-2

Hohenstein, S.; Aschenbruck, J.; Seume, J.R.  (2013): Aerodynamic Effects of Non-Uniform Surface Roughness on a Turbine Blade, Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT-2013-95433
DOI: 10.1115/GT2013-95433
ISBN: 978-0-7918-5522-5

Hohenstein, S.; Seume J.R. (2013): Numerical Investigation on the Influence of Anisotropic Surface Structures on the Skin Friction, Proceedings of 10^th European Conference on Turbomachinery (ETC), 15-19 April 2013, Lappeenranta, Finnland

Kunte, H.; Seume J.R.  (2013): Design of a Partial Admission Impulse Turbine for an Automotive ORC-Application, 2^nd International Seminar on ORC Power Systems, ASME, 7-8 October 2013, Rotterdam, Netherlands

Laguna, J. D.; Bartelt, M.; Keller, C.; Seume, J.R. (2013): Sensitivity and Uncertainty of the Radial Mode Analysis for Turbomachinery Applications, Proceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-109

Laguna, J.D.; Bartelt, M.; Seume, J.R. (2013): Impact of Swirl on the Sensitivity of the Radial Mode Analysis in Turbomachinery, Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95460
DOI: 10.1115/GT2013-95460
ISBN: 978-0-7918-5524-9

Bartelt, M.; Meinzer, C.E.; Laguna, J.D.; Seume, J.R. (2012): Design Methodology and Experimental Validation of an Aeroacoustic Test Rig for Turbomachinery Applications, Proceedings of 13^th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, Tokyo, 2012, ISUAAAT-S12-4

Biester, M. H.-O.; Henke, M.; Gündogdu, Y.; Engel, K.; Seume, J.R. (2012): Unsteady Wake-Blade Interaction: A Correlation between Surface Pressure Fluctuations and Loss Generation, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69616
DOI: 10.1115/GT2012-69616
ISBN: 978-0-7918-4474-8

Chahine, C; Seume, J.R.; Verstraete, T. (2012): The Influence of Metamodeling Techniques on the Multidisciplinary Design Optimization of a Radial Compressor Impeller, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-68358
DOI: 10.1115/GT2012-68358
ISBN: 978-0-7918-4474-8

Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.; Seume, J.R. (2012): Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-69966
DOI: 10.1115/GT2012-69966
ISBN: 978-0-7918-4473-1

Henke, M.; Biester, M. H.-O.; Gündogdu, Y.; Lippl, F.; Mass, E.; Seume, J.R. (2012): Numerical Assisted Design of a Variable Rotating Vane Carrier Device for Turbine Test Rigs with Split Housing Structures using a Segmented Half-Ring Bearing Concept, 53^rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April 2012, Honolulu, Hawaii, AIAA 2012-1660

Lietmeyer, C.; Seume, J.R.; Scheuer, R.; Vynnyk, T.; Reithmeier, E., Krawczyk, T.; Denkena, B.; Wojakowski, B.; Kling, R.; Overmeyer, L. (2012): Recent Advances in Manufacturing of Riblets on Compressor Blades and their Aerodynamic Impact, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69067
DOI: 10.1115/GT2012-69067
ISBN: 978-0-7918-4474-8

Adamczuk, R.R.; Seume, J.R. (2011): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions, Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0175

Bartelt, M.; Kwitschinski, T.; Ceyrowsky, T.; Grates, D.; Seume, J.R. (2011): Experimental and Numerical Investigation of Different Rectangular Volute Geometries for Large Radial Compressors, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46296
DOI: 10.1115/GT2011-46296
ISBN: 978-0-7918-5467-9

Biester, M. H.-O.; Müller, L.; Gündogdu, Y.; Seume, J.R. (2011): Time-Resolved Numerical Investigation of the Interaction of Labyrinth Seal Leakage and Main-Flow in a 1.5-Stage LP Turbine, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45883
DOI: 10.1115/GT2011-45883
ISBN: 978-0-7918-5467-9

Ernst, B.; Kammeyer, J.; Seume, J.R (2011): Improved Map Scaling Methods for Small Turbocharger Compressors, Proceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-45345
DOI: 10.1115/GT2011-45345
ISBN: 978-0-7918-5463-1

Freund, O.; Schaefer, P.; Rehder, H.-J.; Roehle, I. (2011): Experimental Investigations on Cooling Air Ejection at a Straight Turbine Cascade using PIV and QLS, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45296
DOI: 10.1115/GT2011-45296
ISBN: 978-0-7918-5465-5

Herbst, F.; Bluemel, S.; Fakiolas, E.; Seume, J.R. (2011): Numerical Investigation of the Interaction between Probe, Flow and Blading in an Axial-Turbine, Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0194

Herbst, F.; Kozulovic, D.; Seume, J.R. (2011): Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine Profiles, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45621
DOI: 10.1115/GT2011-45621
ISBN: 978-0-7918-5467-9

Herbst, F.; Peters, M.; Seume, J.R. (2011): To the Limits of the Application of the BOS Method, Proceedings of the 11^th International Conference on Fluid Control, Measurements, and Visualization FLUCOME 2011, 5-9 December 2011, Keelung, Taiwan

Kuschel, M.; Seume, J.R.  (2011): Influence of Unsteady Turbine Flow on the Performance of an Exhaust Diffuser, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45673
DOI: 10.1115/GT2011-45673
ISBN: 978-0-7918-5467-9

Lietmeyer, C.; Chahine, C.; Seume, J.R.  (2011): Numerical Calculation of the Riblet-Effect on Compressor Blades and Validation with Experimental Results, Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0106

Lietmeyer, C.; Oehlert, K.; Seume, J.R.  (2011): Optimal Application of Riblets on Compressor Blades and their Contamination Behavior, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46855
DOI: 10.1115/GT2011-46855
ISBN: 978-0-7918-5467-9

Natkaniec, C.K.; Kammeyer, J.; Seume, J.R.  (2011): Secondary Flow Structures and Losses in a Radial Turbine Nozzle, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46753
DOI: 10.1115/GT2011-46753
ISBN: 978-0-7918-5463-1

Opilat, V.; Seume, J.R. (2011): The Effect of the Operating Conditions of the Last Turbine Stage on the Performance of an Axial Exhaust Diffuser, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45668
DOI: 10.1115/GT2011-45668
ISBN: 978-0-7918-5467-9

Opilat, V.; Seume, J.R.  (2011): Application of Endoscopic PIV to the Interaction between Turbine and Exhaust Diffuser, Proceedings of the 9^th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey

Raetz, H.; Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2011): Numerical Investigation of Aerodynamic Radial and Axial Impeller Forces in a Turbocharger, Proceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-46360
DOI: 10.1115/GT2011-46360
ISBN: 978-0-7918-5463-1

Sadovnichiy, V.; Kuschel, M.; Opilat, V.; Seume, J.R. (2011): Effect of Swirl and Tip Leakage on Flow Structure, Losses and Pressure Recovery in Axial Exhaust Diffuser, Proceedings of the 9^th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey

Alhaj, O.; Seume, J.R. (2010): Optical Investigation of Profile Loss in a Linear Turbine Cascade, Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-23166
DOI: 10.1115/GT2010-23166
ISBN: 978-0-7918-4402-1

Herbst, F.; Biester, M. H.-O; Fiala, A.; Engel, K.; Seume, J.R. (2010): Validation of RANS-Modelling Approaches for Active Flow Control by Vortex Generating Jets in a Low-Pressure Turbine Cascade, Proceedings of the 8^th International Symposium on Engineering Turbulence Modelling and Measurements – ETMM8, 9-11 June 2010, Marseille, France

Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2010): Tip Leakage in Small Radial Turbines – Optimum Tip-Gap and Efficiency Loss Correlations, Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22680
DOI: 10.1115/GT2010-22680
ISBN: 978-0-7918-4400-7

Mohseni, A.; Goldhahn, E.; Van den Braembussche, R.A.; Seume, J.R. (2010): Novel IGV Designs for Centrifugal Compressors and their Interaction with the Impeller, Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-23048
DOI: 10.1115/GT2010-23048
ISBN: 978-0-7918-4402-1

Vorreiter, A.: Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R. (2010): Numerical Investigations of the Efficiency of Circulation Control in a Compressor Stator, Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22721
DOI: 10.1115/GT2010-22721
ISBN: 978-0-7918-4402-1

Glodic, N.; Bartelt, M.; Vogt, D.; Fransson, T. (2009): Aeroelastic Properties of Combined Mode Shape in an Oscillating LPT Cascade, Proceedings of the 12^th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, 1-4 September 2009 London, UK

Goltz, I.; Böhmer, H.; Nollau, R.; Belz, J.; Grueber, B.; Seume, J.R. (2009): Piezo-Electric Actuation of Rotor Blades in an Axial Compressor, Proceedings of 8^th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria

Gomez, A.; Seume, J.R. (2009): Modelling of Pulsating Loads on Wind Turbine Blades, Proceedings of the 3^rd International Conference on Energy Sustainability, 19-23 July 2009, San Francisco, California, USA, ES2009-90121
DOI: 10.1115/ES2009-90121
ISBN: 978-0-7918-4890-6

Gómez, A.; Seume, J.R. (2009): Aerodynamic Coupling of Rotor and Tower in HAWTs, Proceedings of European Wind Energy Conference (EWEC), 16-19 March 2009, Marseille, France

Sadovnichiy, V.N.; Binner, M.; Seume, J.R. (2009): The Influence of Axial Gaps and Leaned-Twisted Guide Vanes on the Shroud Leackage and Turbine Stage Efficiency, Proceedings of 8^th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria

Siemann, J.; Nollau, R.; Grüber, B.; Seume, J.R.  (2009): Controlled Excitation of Rotor Blades via Macro Fiber Composites in an Axial Compressor, Proceedings of the 19^th International Symposium on Air Breathing Engines, 7-11 September 2009, Montreal, Canada, ISABE-2009-1263

Früh, W.G.; Seume, J.R.; Gomez, A. (2008): Modelling the Aerodynamic Response of a Wind Turbine Blade Passing in Front of the Tower, Proceedings of European Wind Energy Conference (EWEC), 31 March - 3 April 2008, Brussels, Belgium, 163_EWEC2008

Guendogdu, Y.; Vorreiter, A.; Seume, J.R. (2008): Design of a Low Solidity Flow-Controlled Stator with Coanda Surface in a High Speed Compressor, Proceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-51180
DOI: 10.1115/GT2008-51180
ISBN: 978-0-7918-4316-1

Sieker, O.; Seume, J.R. (2008): Effects of Rotating Blade Wakes on Separation and Pressure Recovery in Turbine Exhaust Diffusers, Proceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-50788
DOI: 10.1115/GT2008-50788
ISBN: 978-0-7918-4316-1

Ziaei Rad, M.; Nouri-Broujerdi, A.; Seume, J.R. (2008): Numerical Computation of a Compressible Laminar Flow with Heat Transfer in the Entrance Region of a Pipe, Proceedings of ASME Summer Heat Transfer Conference, 10-14 August 2008, Jacksonville, Florida, USA, HT2008-56199
DOI: 10.1115/HT2008-56199
ISBN: 978-0-7918-4849-4

Barchewitz, L.P.; Seume, J.R. (2007): Dynamic Modelling and Controls of an Air Supply System for In-Flight PEM, Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27900
DOI: 10.1115/GT2007-27900
ISBN: 0-7918-4792-6

Herzog, N.; Binner, M.; Seume, J.R.; Rothe, K. (2007): Verification of Low-Flow Conditions in a Multistage Turbine, Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27328
DOI: 10.1115/GT2007-27328
ISBN: 0-7918-4795-0

Imetovski. E.; Seume, J.R. (2007): Multi-Stage Effects of Bow and Sweep in a High-speed Axial Compressor, Proceedings of the International Gas Turbine Congress (IGTC), 2-7 Dec. 2007, Tokyo, Japan, IGTC2007-TS-049

Oehlert, K.; Seume, J.R.; Wang, B.; Denkena, B.; Hage, W.; Knobloch, K.; Meyer, R.; Siegel, F.; Ostendorf, A.; Vynnyk, T.; Reithmeier, E. (2007): Exploratory Experiments on Machined Riblets for 2-D Compressor Blades, Proceedings of ASME International Mechanical Engineering Congress & Exposition (IMECE), 11-15 November 2007, Seattle, Washington, USA, IMECE2007-43457
DOI: 10.1115/IMECE2007-43457
ISBN: 0-7918-4295-9

Sadovnichiy, V.N.; Alhaj, O.; Binner, M.; Seume, J.R. (2007): CFD Models for Blade Tip and Diaphragm Gland Leakage Flow in Turbines of Disc-and Diaphragm Design, Proceedings of 7^th European Conference on Turbomachinery (ETC), Fluid Dynamics and Thermodynamics, 5-9 March 2007, Athens, Greece

Shaaban, S.; Seume, J.R. (2007): Aerodynamic Performance of Small Turbocharger Compressors, Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27558
DOI: 10.1115/GT2007-27558
ISBN: 0-7918-4792-6

Sieker, O.; Seume, J.R. (2007): Influence of Rotating Wakes on Separation in Turbine Exhaust Diffusers, Proceedings of 8^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July 2007, Lyon, France, ISAIF8-0054

Sieker, O.; Seume, J.R. (2007): Influence of Artificial Generated Rotating Wakes on Separating Behaviour of Annular Diffusers, Proceedings of 8^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July, 2007, Lyon, France ISAIF8-0054

Barchewitz, L.P.; Seume, J.R. (2006): Conceptual Analysis of Air Supply Systems for In-Flight PEM-FC, Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90688
DOI: 10.1115/GT2006-90688
ISBN: 0-7918-4239-8

Beil, A.; Seume, J.R. (2006): Unsteady Performance of a PEMFC System Including Autothermal Methane Reforming, Proceedings of 4^th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97008
DOI: 10.1115/FUELCELL2006-97008
ISBN: 0-7918-4247-9

Braun, M.; Seume, J.R. (2006): Forward Sweep in a Four-Stage High-Speed Axial Compressor, Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90218
DOI: 10.1115/GT2006-90218
ISBN: 0-7918-4241-X

Fischer, K.; Seume, J.R. (2006): Location and Magnitude of Heat Sources in Solid Oxide Fuel Cells, Proceedings of 4^th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97167 (auch veröffentlicht in Journal of Fuel Cell Science and Technology, February 2009)
DOI: 10.1115/FUELCELL2006-97167
ISBN: 0-7918-4247-9

Goldhahn, E.; Seume, J.R. (2006): The Background Oriented Schlieren Technique: Sensitivity, Accuracy, Resolution and Application to a Three-Dimensional Density Field, Proceedings of 13^th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 26-29 June 2006, Lisbon, Portugal (auch veröffentlicht in Experiment in Fluids, July 2007)

Hellmich, B.; Seume, J.R. (2006): Causes of Acoustic Resonance in a High-Speed Axial Compressor, Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90947 (auch veröffentlicht in Journal of Turbomachinery, May 2008)
DOI: 10.1115/GT2006-90947
ISBN: 0-7918-4241-X

Oehlert, K.; Seume, J.R. (2006): Exploratory Experiments on Machined Riblets on Compressor Blades, Proceedings of ASME 2^nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093
DOI: 10.1115/FEDSM2006-98093
ISBN: 0-7918-4750-0

Oehlert, K.; Seume, J.R. (2006): Exploratory Experiments on Machined Riblets on Flat Plates, Proceedings of ASME 2^nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093

Griebel, A.; Seume, J.R. (2005): The Influence of Variable Rotor-Stator Interaction on Boundary-Layer Development in an Axial Compressor, Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68902
DOI: 10.1115/GT2005-68902
ISBN: 0-7918-4730-6

Herzog, N.; Gündogdu, Y.; Kang, G.; Seume, J.R. (2005): Part Load Operation of a Four-Stage Turbine, Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68700
DOI: 10.1115/GT2005-68700
ISBN: 0-7918-4730-6

Schreyer, B.; Seume, J.R. (2005): The Loss Behaviour of Milled Turbine Blades, Proceedings of 6^th Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC 6), 7-11 March 2005, Lille, France, Vol. 1, p. 210, AFT-020_03 / 124

Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R. (2005): Improved Diffuser / Internal Volute Combinations for Centrifugal Compressors, Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68894
DOI: 10.1115/GT2005-68894
ISBN: 0-7918-4730-6

Hellmich, B.; Seume, J.R. (2004): Acoustic Resonance in a Four-Stage High-Speed Axial Compressor, Proceedings of the 10^th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 7-11 March 2004, Honolulu, Hawaii, ISROMAC10-2004-004

Fischer, A.; Riess, W.; Seume, J.R. (2003): Performance of Strongly Bowed Stators in a 4-Stage High Speed Compressor, Proceedings of the ASME Turbo Expo, 16-19 June 2003, Atlanta, Georgia, USA, GT-2003-38392
DOI: 10.1115/GT2003-38392
ISBN: 0-7918-3689-4

Fischer, A.; Seume, J.R. (2003): Comparison of Multistage CFD Calculations and Measurements in a high speed Compressor, Conference on Modelling Fluid Flow (CMFF' 03) The 12^th International Conference on Fluid Flow Technologies, 3-6 September 2003, Budapest, Hungary

Hellmich, B.; Braun, M.; Fischer, A.; Seume, J.R. (2003): Observations on the Causal Relationship between Blade count and Developing Rotating Stall in a Four Stage Axial Compressor, Proceedings of 5^th European Conference on Turbomachinery (ETC), 17-22 March 2003, Prague, Czech Republic

Fleige, H.-U.; Riess, W.; Seume, J.R.  (2002): Swirl and Tip Leakage Flow Interaction with Struts in Axial Diffusers, Proceedings of the ASME Turbo Expo 2002, 3-6 June, Amsterdam, The Netherlands, GT-2002-30491
DOI: 10.1115/GT2002-30491
ISBN: 0-7918-3610-X

Harbecke, U.G.; Riess, W.; Seume, J.R.  (2002): The Effect of Milling Process Induced Coarse Surface Texture on Aerodynamic Turbine Profile Losses, Proceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30333
DOI: 10.1115/GT2002-30333
ISBN: 0-7918-3610-X

Hasemann, H.; Rautenberg, M.; Hagelstein, D.; Sonthipermpoon, K. (2002): The Vibration Behavior of Centrifugal Impeller Blades in the Five-Axis CNC Flank Milling Process, Proceedings of 6^th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 730-736

Hellmich, B.; Fischer, A.; Reissner, A.; Runkel, J.; Seume, J.R. (2002): Estimation of the Rotating Frequency from Rotor Frequency and Common Blade Number Integer Fractions in a Four Stage Axial Compressor, Proceedings of 6^th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 737-744

Levy, Y.; Pismenny, J.; Reissner, A.; Riess, W. (2002): Experimental Study of Rotating Stalls in a Four-Stage Axial Compressor, Proceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30362
DOI: 10.1115/GT2002-30362
ISBN: 0-7918-3610-X

Runkel, J.; Hellmich, B. (2002): Operating Experience with an On-Line Vibration Control System for PRW Main Coolant Pumps, Proceedings of 6^th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. I, pp. 243-250

Chen, J.; Hasemann, H.; Cheng, X.; Rautenberg M. (2001): Stall Inception Behaivior in a Centrifugal Compressor Re-examined using Wavelet Method, Proceedings of 5^th International Symposium on Experimental and Computational Aerothermo­dynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland

Chen, Y.N.; Hagelstein, D.; Haupt, U.; Rautenberg, M. (2001): Behavior of Deep Surge of Centrifugal Compressors, Proceedings of 5^th International Symposium on Experimental and Computational Aerothermo­dynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland

Fleige, H.-U.; Riess, W.  (2001): Investigations of Gas Turbine Exhaust Diffuser, Proceedings of 4^th European Conference on Turbomachinery (ETC), 20-23 March 2001, Firenze, Italy

Harbecke, U.; Riess, W. (2001): Experimental and Numerical Investigation of a Technically Rough Turbine Blade Cascade, Proceedings of 4^th European Conference on Turbomachinery (ETC), 20-23 March 2001, Firenze, Italy

Notkina, I.M.; Strizhak, L.J.; Suslina, L.P.; Beyer, B.; Bahm, F.; Rautenberg, M. (2001): Investigation of Three-Dimensional Compressible Turbulent Flow in a Vaneless Diffuser of a Radial Turbomachine Stage, Proceedings of 5^th International Symposium on Experimental and Computational Aerothermo­dynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland

Chen, Y.N.; Hagelstein, D.; Kassens, I.; Haupt, U.; Rautenberg, M. (2000): Effect of the Decaying Overshoot of the Rankine Vortex on the Axial Flow Field Behind the Inlet Guide Vane of Centrifugal Compressors, 45^th International Gas Turbine and Aeroengine Congress and Exhibition of the ASME, 8-11 May 2000, Munich, Germany, ASME-Paper 2000-GT-0427

Gehring, S.; Riess, W. (2000): Analysis of the Mixing Process in a 1.5 Stage Turbine with Coolant Ejection, Proceedings of the ASME Turbo Expo, 8-12 May 2000, Munich, Germany, 2000-GT-669

Hellmich, B.; Fiedler, J.; Runkel, J.; Stegemann, D. (2000): The Influence of Different SPN-Detector Emitter Materials to the Results of Neutron Noise Analysis, Proceeding of Physor, 7-12 May 2000, Pittsburgh, Pennsylvania, USA

Runkel J.; Fiedler, J.; Stegemann, D. (2000): Results of Noise Diagnostics in Different Reactor Types within International Scientific and Technological Cooperation Programs, Proceedings of NPIC & HMIT, 13-17 November 2000, Washington D.C., USA

Runkel, J.; Heidemann, P.; Stegemann, D. (2000): Localization of Impacting Instrument Tubes Inside Operating Boiling Water Reactors by Use of Incore Accelerometers, Proceedings of NPIC & HMIT, 13-17 November 2000, Washington D.C., USA

Runkel, J.; Stegemann, D.; Fiedler, J.; Heidemann, P.  (2000): Vibration Monitoring by Neutron Noise Analysis and Acceleration Measurements inside Operating Nuclear Power Reactors, Proceeding of Physor, 7-12 May 2000, Pittsburgh, Pennsylvania, USA

Gehring, S.; Riess, W.  (1999): Throughflow Analysis for Cooled Turbines, Proceedings of 3^rd European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC), 2-5 March 1999, London, UK, IMechE 1999 C557/022, pp 79-88

Runkel, J.; Stegemann, J.; Fiedler, P.; Heidemann, R.; Blaser, R.; Schmid, F.; Trobitz, M.; Hirsch, L.; Thoma, K. (1999): New Technologies for Acceleration and Vibration Measurements Inside Operating Nuclear Power Reactors, Proceedings of the Workshop on Core Monitoring for Comercial Reactors: Improvements in Systems and Methods, 4-5 October 1999, Stockholm, Sweden, pp. 103-115

Beyer, B.; Hasemann, H.; Rautenberg, M.  (1998): The Use of Axial Flow Turbines for Driving Centrifugal Compressors, Proceedings of 6^th International Conference on Turbocharging and Air Management Systems, 3-5 November 1998, London, UK, IMechE 1998 C554/021, pp 183-192

Hermann, J.; Hantschk, C.C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A.; Seume, J.R.; Vortmeyer, N.; Krause, W. (1997): Aktive Instabilitätskontrolle an einer 170 MW Gasturbine , 18. Deutsch-Niederländischer Flammentag, 28-29 August 1997, Delft, Netherlands, VDI-Berichte 1313, pp. 337-344

Johnson, T.; Becker, B.; Seume, J.R.; Termuehlen, H. (1997): First V84.3A Gas Turbine Installation at Hawthorn Station, Proceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357

Petrovic, M.; Riess, W.  (1997): Off-Design Flow Analysis and Performance Prediction of Axial Turbines, Proceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357

Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A. (1997): Application of Active Combustion Instability Control to a Heavy Duty Gas Turbine, Proceedings of ASME Asia Congress and Exposition, 30 September – 02 October 1997, Singapore (auch veröffentlicht in Journal of Engineering for Gas Turbines and Power, October 1998)

Böhm, W.; Raake, D.; Regnery, D.; Seume, J.R.; Terjung, K.  (1996): Testing the Model V84.3A Gas Turbine – Experimental Techniques and Results, Proceedings of International Gas Turbine and Aeroengine Congress and Exposition, 5-7 November 1996, Jakarta, Indonesia, ASME -Paper 96-TA-14

Janssen, M.; Mönig, R.; Seume, J.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E. (1994): The Model V 84.3 Shop Tests: Compressor Flow Field Measurements and Evaluation, Proceedings of International Gas Turbine and Aeroengine Congress and Exposition, 13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-462

Janssen, M.; Seume, J.R.; Zimmermann, H. (1994): The Model V 84.3 Shop Tests: Tip Clearance Measurements and Evaluation, Proceedings of International Gas Turbine and Aeroengine Congress and Exposition,13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-319

Seume, J.R.; Simon, T.W. (1987): Flow Oscillation Effects in Tubes and Porous Material: Unresolved Issues, Beitrag in: Morel, T.E., Dudenhoefer, J.E., Uzkan, T., Singh, P.J. (Hrsg.): Fluid Flow and Heat Transfer in Reciprocating Machinery. ASME Winter Annual Meeting, 1987, Boston, Massachusetts, USA, pp. 55-62 New York: American Society of Mechanical Engineers 1988

Rautenberg, M.; Malobabic, M. (1985): On Turbochargers with Variable Geometry, Gas Turbine Conference and Exhibit, 18-21 March 1985, Houston, Texas, ASME Paper 85-T-149

Internationale Konferenzbeiträge, nicht begutachtet

Hain, R.; Fuchs, T.; Wein, L.; Kluge, T.; Seume, J.; Kähler, C. J. (2019): Stereoscopic PTV measurements in the housing/rotor cavity of a shrouded turbine rotor, Proceedings of the 13th International Symposium on Particle Image Velocimetry 2019

Mimic, D.; Jätz, C.; Oettinger, M.; Herbst, F.; Seehausen, H.; Kurth, S.; Frieling, D.; Zieße, M.; Seume, J. R. (2019): Improving Aerothermal and Aeromechanical Turbomachinery Design by Combining High-Fidelity Methods with Multi-Stage Approaches, Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-PL3

Mimic, D.; Jätz, C.; Sauer, P.; Herbst, F. (2019): Total Pressure Loss Reduction in Annular Diffusers , International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), April 2019, Volume 10, Number 2

Schwerdt, L.; Willeke, T.; Huxdorf, O.; Krone, J.-H.; Friedrichs, J.; Riemenschneider, J.; Monner, H.P.; Seume, J.R.  (2019): Active Flow Control in an Axial Compressor by Zero-Net-Mass-Flux Actuation, Proceedings of the 14th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows 8-11 July 2019, Gdansk, Poland, ISAIF14-084

Bittner, S.L.; Keller, C.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of a Forced Response Analysis Using a Time-Linearized Method, AIAA SciTech, 8-12 January 2018, Kissimmee, Florida, AIAA 2018-0461
DOI: 10.2514/6.2018-0461

Bode, C.; Friedrichs, J.; Kellersmann, A.; Herbst, F.; Seume, J.R. (2018): Modeling Transient Aircraft Engine Operation, 13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA

Gilge, P.; Seume, J.; Mulleners, K. (2018): Effect Of Surface Roughness On The Characteristic Length Scales In The Wake Of A Compressor Blade: A POD Analysis, 19th International Symposium on the Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 July 2018, Lisbon, Portugal

Gilge, P.; Seume, J.R.; Mulleners, K. (2018): Analysis of Local Roughness Combinations on the Aerodynamic Properties of a Compressor Blade, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0345
DOI: 10.2514/6.2018-0345

Gößling J.; Ahlefeldt, T.; Mumcu, A.; Hilfer, M. (2018): Experimental validation of unsteady pressure-sensitive paint for acoustic applications, 5th International Conference on Experimental Fluid Mechanics ICEFM, 2018, Munich

Hartmann, U.; Von der Haar, H.; Dinkelacker, F.; Seume, J.R.  (2018): Experimental Defect Detection in a Swirl-Burner Arry Through Exhaust Jet Analysis, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0303
DOI: 10.2514/6.2018-0303

Hauptmann, T.; Seume, J.R. (2018): Blade Vibration Measurements in a Multi-Stage Axial Turbine with Geometric Variations, 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-0952
DOI: 10.2514/6.2018-0952

Henke, M.; Herbst, F.; Rätz, H.; Seume, J.R. (2018): A New Facility for Dynamic Turbomachinery and Wind-Tunnel Testing, XXIV Biannual Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines

Herbst, F.; Müller-Schindewolffs, C.; Schwarzbach, F.; Zieße, M.; Bode, C. (2018): Appropriate Inlet Boundary Conditions for Scale-Resolving Simulations of Turbomachinery Configurations, 13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA

Jätz, C.; Mimic, D.; Herbst, F.; Seume, J.R. (2018): Prediction Performance of the k-ε Elliptic-Blending Turbulence Model in Axial Diffusers, Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS48

Kurth, S.; Hamann, C.; Seume, J.R.; Mulleners, K. (2018): Experimental Investigation of the Influence of Anisotropic Surface Structures on the Boundary Layer Flow, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0585
DOI: 10.2514/6.2018-0585

Mumcu, A; Thouault, N.; Seume, J.R. (2018): Aeroacoustic Testing for Sound Propagation through Turbine Vanes, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-1003
DOI: 10.2514/6.2018-1003

Narjes, G.; Kauth, F.; Müller, J.; Mertens, A.; Seume, J.R.; Ponick, B. (2018): High-Speed Permanent Magnet Synchronous Machine for Short-Term Operation in an Electrically Powered High-Lift System, AIAA/IEEE Electric Aircraft Technologies Symposium, AIAA Propulsion and Energy Forum, 9-11 July 2018, Cincinnati, Ohio, USA, AIAA2018-4989
DOI: 10.2514/6.2018-4989

Shimada, T.; Takahashi, Y.; Kuboyama, T.; Moriyoshi, Y.; Fischer, T. (2018): A simple System for Turbocharger Bearing Friction Measurement using Deceleration Method, 23. Aufladetechnische Konferenz, 20.-21. September 2018, Dresden

Kauth, F.; Narjes, G.; Müller, J.; Seume, J.R.; Vasista, S.; Müller, T.; Francois, D.G.; El Sayed M., Y.; Semaan, R.; Behr, C.; Schwerter, M.; Leester-Schädel, M.; Nolte, F.; Giesecke, D.; Atalayer, C.; Radespiel, R. (2017): Progress in Efficient Active High-Lift, 35th AIAA Applied Aerodynamics Conference, AIAA AVIATION Forum, 5-9 June 2017, Denver, Colorado
DOI: 10.2514/6.2017-3559

Koepplin, V.; Seume, J.R.; Herbst, F. (2017): Investigation of Local Flow Phenomena of Misaligned Riblets in a Turbulent Boundary Layer, European Drag Reduction and Flow Control Meeting, 6 April 2017, Frascati, Rome, Italy.

Siemann, J.; Schwerdt, L.; Willeke, T.; Seume, J.R. (2017): Active Flow Control by Aspiration and Injection in Multi-Stage Axial Compressors, Technical Keynote at Global Power & Propulsion Inaugural Forum, Zurich, Switzerland, 16-18 January 2017

Bode, C.; Friedrichs, J.; Müller, C.; Herbst, F. (2016): Application of Crossflow Transition Criteria to Local Correlation-Based Transition Model, 52^nd AIAA/SAE/ASEE Joint Propulsion Conference, Propulsion and Energy Forum, Salt Lake City, Utah, USA, AIAA 2016-5054
DOI: 10.2514/6.2016-5054

Burgmann, S.; Fischer, T.; Rudersdorf, M.; Seume, J.R. (2016): Entwicklung eines Kleingebläses mit querschnittsvariablem Diffusor und Volute zur Wirkungsgradsteigerung im Teillastbetrieb, 24. Fachtagung „Lasermethoden in der Strömungsmesstechnik“, 6-8 Sept. 2016, Cottbus
ISBN: 978-3-9816764-2-6

Ernst, B.; Seume, J.R.; Herbst, F.  (2016): Probabilistic CFD-Analysis of Regeneration-Induced Geometry Variances in a Low-Pressure Turbine, 52^nd AIAA/SAE/ASEE Joint Propulsion Conference 2016, AIAA Propulsion and Energy Forum, 25-27 July 2016, Salt Lake City, Utah, USA, AIAA 2016-4555
DOI: 10.2514/6.2016-4555

Fischer, T.; Seume, J.R. (2016): Low Inertia Centrifugal Compressor Wheels: Aerodynamic and Mechanical Design, IEEE Conference Publications, 2016 International Conference on Applied System Innovation (ICASI)
DOI: 10.1109/ICASI.2016.7539797

Kauth, F., Narjes, G., Müller, J., Mertens, A., Ponick, B., and Seume, J.R. (2016): Highly Integrated Electrically Driven Active High-Lift Compressor Systems for Future Civil Aircraft, Greener Aviation Conference, 11-13 October 2016, Brussels, Belgium

Mai, H.; Rätz, H.; Weigl, S.; Kunte, H.S.; Willers, O.; Nascimento, D.; Seume, J.R. (2016): Design and development of a component test bench for the investigation of automotive ORC systems, 16th Stuttgart International Symposium, FKFS, 15-16 March 2016, Stuttgart; proceedings pp. 1495-1514, Springer, Wiesbaden
DOI: 10.1007/978-3-658-13255-2_110

Neuhaus, L.; Gilge, P.; Seume, J.R.; Mulleners, K. (2016): Influence of Surface Roughness on the Turbulent Properties in the Wake of a Turbine Blade, 18^th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 4-7 July 2016, Lisbon, Portugal

Gilge, P.; Mulleners, K.  (2015): On the Resulting Aerodynamic Loss of Combinations of Localized Surface Roughness Patches on a Turbine Blade, 33^rd AIAA Applied Aerodynamics Conference, AIAA Aviation 2015, 22-26 June 2015, Dallas, USA, AIAA-2015-3161
DOI: 10.2514/6.2015-3161

Hamann, C.; Kurth, S.; Mulleners, K. (2015): Towards Quantifying Effects of Refractive Index Mismatch on PIV Results, 11^th International Symposium on Particle Image Velocimetry - PIV15, 14-16 September 2015, Santa Barbara, USA

Hartmann, U.; Adamczuk, R.; Seume, J.R. (2015): Tomographic Background Oriented Schlieren Applications for Turbomachinery, 53^rd AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 5-9 January 2015, Kissimmee, Florida, AIAA2015-1690
DOI: 10.2514/6.2015-1690

Hauptmann, T.; Aschenbruck, J.; Christ, P.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2015): Influence of Combustion Chamber Defects on the Forced Response Behavior of Turbine Blades, Proceedings of the 14^th International Symposium on Unsteady Aerodynamics, Aeroacoustics & Aeroelasticity of Turbomachines, ISUAAAT14, 8-11 September 2015, Stockholm, Schweden

Kunte, H.; Seume, J.R.  (2015): Experimental Setup of a small supersonic Turbine for an Automotive ORC Application running with Ethanol, 3^rd International Seminar on ORC Power Systems, City of Brussels, Belgium

Samarbakhsh, S.; Meinzer, C.E.; Laumert, B.; Seume, J.R.  (2015): On Non-Synchronous Vibrations: Lock-In Effects of an Eccentrically Rotating Cylinder, Proceedings of the 14^th International Symposium on Unsteady Aerodynamics, Aeroacoustics&Aeroelasticity of Turbomachines, ISUAAAT 14, 8-11 September 2015, Stockholm, Sweden

Teichel, S.; Radespiel, R.; Burnazzi, M.; Dietzel, A.; Leester-Schädel, M.; Schwerter, M.; Sinapius, M.; Behr, C.; Monner, H.P.; Rudenko, A.; Horst, P.; Schmitz, A.; Ponick, B.; Dörbaum, M.; Mertens, A.; Merkert, A.; Friedrichs, J.; Atalayer, Ç.; Seume, J.R. (2015): SFB 880 - Efficient High Lift, Proceedings of 5^th International Workshop on Aircraft System Technologies, 24-25 March 2015, Hamburg, Germany, Shaker, Aachen
ISBN: 978-3-8440-3319-9

Waite, J.J.; Kielb, R.E.; Bittner, S.L.  (2015): The Influence of Steady Loading Parameters on Low-Pressure Turbine Flutter, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, 5-9 January 2015, Kissimmee, USA, AIAA 2015-1417
DOI: 10.2514/6.2015-1417

Wolff, T.; Seume, J.R.  (2015): Airfoil with Morphing Trailing Edge for Load Reduction in Wind Turbines, 33^rd Wind Energy Symposium, AIAA Scitech, 5-9 January 2015, Kissimmee, FL/USA, AIAA 2015-1662
DOI: 10.2514/6.2015-1662

Adamczuk, R.; Hartmann, U.; Seume, J. (2014): Application of the Background-Oriented Schlieren Method for the Analysis of an Engine’s Exhaust Jet, XXII Biannual Symposium on Measuring Techniques in Turbomachinery, 4-5 September 2014, Lyon, France, MTT2214-A514

Asche, D.; Lietmeyer, C.; Schwerdt, L.; Seume, J.R. (2014): Particle Concentration and Velocity Measurements in a Cascade Wind Tunnel by Means of L2F, XXII Biannual Symposium on Measuring Techniques in Turbomachinery, 4-5 September 2014, Lyon, France, MTT2214-A513

Brand, C.R.; Seume, J.R.  (2014): Flaps for Wind Turbine Applications: First Results of the Experimental Investigations, Wind Turbine Sound 2014 - EWEA Technology Workshop, Malmö, Sweden

Brand, C.R.; Seume, J.R. (2014): Flaps for Wind Turbine Application: Noise Source Localization on a Test Airfoil, Proceedings of the 10^th PhD Seminar on Wind Energy in Europe, October 28-31, 2014, Orléans, France

Müller, C.; Herbst, F. (2014): Modelling of Crossflow-Induced Transition Based on Local Variables, 11^th World Congress on Computational Mechanics, 5^th European Conference on Computational Mechanics, 6^th European Conference on Computational Fluid Dynamics, 20–25 July 2014, Barcelona, Spain

Winstroth, J.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: Assessment on a Scaled Model, 32^nd ASME Wind Energy Symposium, 13-17 January 2014, National Harbor, Maryland

Winstroth, J.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: 3D Simulation of the Experimental Setup, EWEA 2014, 10-13 March 2014, Barcelona, Spain

Wolff, T.; Seume, J.R.  (2014): Numerical Investigation of an Airfoil with Morphing Trailing Edge for Load Reduction, Proceedings of the 10^th PhD Seminar on Wind Energy in Europe, October 28-31, 2014, Orléans, France

Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Assessment of Defects and Damage in Jet Engines, International Conference MRO Maintenance, Repair and Overhaul, 2013, Berlin

Biester, M. H.-O.; Gündogdu, Y.; Seume, J.R. (2013): Clocking Effects on Surface-Pressure Fluctuations for Variable Axial-Gaps, 21^st AIAA Computational Fluid Dynamics Conference, 24-27 June 2013, San Diego, USA. AIAA-2013-2955
DOI: 10.2514/6.2013-2955

Ernst, B.; Seume, J.R. (2013): Modelling Structural Uncertainty of Wind Turbine Rotor Blades for Aeroelastic Investigations, Seventh M.I.T. Conference on Computational Fluid and Solid Mechanics - Focus: Multiphysics & Multiscale, June 12-14, 2013, Massachusetts Institute of Technology, Cambridge, MA 02139 USA

Kunte, H.; Seume J.R.  (2013): Partial Admission Impulse Turbine for Automotive ORC Application, 11^th International Conference on Engines & Vehicles, Capri/Neapel, Italy
DOI: 10.4271/2013-24-0092

Laguna, J.D.; Bartelt, M.; Seume J.R. (2013): Radial Mode Analysis in an Aero-Acoustic Wind Tunnel, AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy – Veröffentlichung und Posterbeitrag

Meinzer, C.E.; Freund, O.; Seume J.R. (2013): Design and Operation of an Acoustic System for Traveling Wave Excitation, AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy

Sadovnichiy, V. N.; Drechsel, B.; Seume, J.R. (2013): Influence of Swirl Flow on Distribution of Loss Components in Axial Annular-Conical Diffusers, Proceedings of 11^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 6-11 May 2013, Shenzen, China

Teichel, S.H.; Verstraete, T.; Seume, J.R. (2013): Optimized Preliminary Design of Compact Axial Compressors: A Comparison of Two Design Tools, 31^st AIAA Applied Aerodynamics Conference, 24-27 June 2013, San Diego, USA, AIAA-2013-2651

Witthaus, S.; Bartelt, M.; Seume, J.R.  (2013): Sensitivity Study of the Sound Radiation of Aircraft Engine Compressors According to Different Inlet Conditions, AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy

Bartelt, M; Freund, O.; Seume, J.R.; Panning-von Scheidt, L.; Röhle, I.; Buske, C. (2012): Aeroakustik & Aeroelastik der Strömungsmaschinen – Eine Vorlesung als Reaktion auf aktuelle Anforderungen der Turbomaschinenentwicklung, 38. Jahrestagung für Akustik – DAGA 2012, 19.-22. März 2012, Darmstadt

Ernst, B.; Gònzales, A.; Bloh, M.; Seume, J.R. (2012): Implementation of the Cuckoo Search Algorithm to Optimize the Design of Wind Turbine Rotor Blades, Proceedings of the EWEA Annual Event, 16-19 June 2012, Copenhagen, Denmark

Laguna, J.; Bartelt, M.; Drechsel, B.; Seume, J.R. (2012): Entwicklung einer variablen Messeinheit für Schallfeldanalysen in Turbomaschinen, 38. Jahrestagung für Akustik – DAGA 2012, Darmstadt

Lin, S.Y.; Mulleners, K.; Seume, J.R. (2012): Effect of Spinner Geometry on the Flow Near the Hub of Modern Wind Turbines, Proceedings of 8^th PhD Seminar on Wind Energy in Europe, September 12-13, 2012, ETH Zurich, Switzerland - Posterbeitrag

Seume, J.R.; kleine Sextro, T. (2012): The Potential of Variable Inlet Guide Vanes for Turbocharger Compressors, 4^th International Congress on Advanced Downsizing & Turbocharging Concepts, 26-28 March 2012, Stuttgart, Germany

Winstroth, J.; Seume, J.R. (2012): New Test Bench for Optical Measurements of Rotor Blade Deformations on Wind Turbines, Proceedings of 8^th PhD Seminar on Wind Energy in Europe, September 12-13, 2012, ETH Zurich, Switzerland

Adamczuk, R.; Aschenbruck, J.; Bartelt, M.; Herbst, F.; Seume, J.R. (2011): Inverse Methods in Turbomachinery Applications, Aachen Conference on Computational Engineering Science, ACCES 2011, Aachen

Biester, M. H.-O.; Henke, M.; Seume, J.R. (2011): Numerically Optimized Design of a 1.5-Stage Turbine Test-Rig Instrumentation, Workshop of the DGLR-Section Thermo- and Fluid-Dynamics, CFD and Experiment – Integration of Simulation, Göttingen, Germany

Eilts, P.; Herbst, F.; Kammeyer, J.; Natkaniec, C.; Porzig, D.; Sextro, T.; Schwarze, H.; Seume, J.R.; Stöber-Schmidt, C.-P. (2011): The Potential of Variable Compressor Geometry for Highly Boosted Gasoline Engines, SAE World Congress & Exhibition, 12-14 April 2011, Detroit, USA, 11PFL-0413

Kammeyer, J.; Natkaniec, C.K. (2011): Workshop: Turbocharger – Future Demands for Downsizing Applications, 3^rd International Conference on Downsizing and Turbocharging Concepts, 9-11 March 2011, Wiesbaden, Germany

Natkaniec, C.K.; Kammeyer, J.; Seume, J.R.  (2011): Influence of Variable Nozzle Geometry on Radial Turbine Performance, Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0112

Seume, J.R.; Kammeyer, J.; Natkaniec, C. (2011): Turbocompressor and Turbine Design for Downsizing Applications, 3^rd International Conference on Downsizing and Turbocharging Concepts, 9-11 March 2011, Wiesbaden, Germany

von Seggern, H.G.; Haslbeck, K.; Seume, J.R. (2011): Numerical Study of Aerosol Generation in the Deep Human Lung, Proceedings of 10^th International Symposium on Experimental and Computationel Aerothermodynamics of Internal Flows (ISAIF), 4-7 June 2011, Brussels, Belgium

von Seggern, H.G.; Seume, J.R. (2011): Numerical Study of Aerosol Generation in the Deep Human Lung – Fluence of Chronic Lung Injuries, Proceedings of international 18^th Congress of the International Society for Aerosols in Medicine, 18-22 June 2011, Rotterdam, the Netherlands

Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2010): Influence of Tip-Gap Losses on the Stage Efficiency of Downsizing Turbocharger Turbines, Proceedings of 9^th International Conference on Turbochargers and Turbocharging (IMechE), 19-20 May 2010, London, UK

Kammeyer, J.; Seume, J.R. (2010): Gasturbine Range Extender – Serial Full Hybrid, IZB 2010 Workshop, October 7, Wolfsburg

Bartelt, M.; Mohseni, A.; Opilat, V.; Seume, J.R. (2009): Endoscopic Stereoscopic PIV Measurements in Turbomachines, Posterbeitrag International Symposium on 25 Years of Particle Image Velocimetry in Aerodynamics, 23-25 September 2009, Göttingen, Germany

Haslbeck, K.; Seume, J.R. (2009): Aerosol Formation in the Alveoli – in Search of Sensitive Parameters Using Computational Fluid Dynamics, Proceedings of 17^th International Congress of the International Society for Aerosols in Medicine, 10-14 May 2009, Monterey, California, USA, Abstract in the Journal of Aerosol Medicine and Pulmonary Drug Delivery, Vol. 22, Issue 2, p. 204

Kleppa, O.; Barchewitz, L.P.; Seume, J.R. (2009): Conceptual Analysis, Dynamic Modelling and Controls of an Air Supply System for In-Flight Proton Exchange Membrane Fuel Cells (PEM-FC), Proceedings of 2^nd International Workshop on Aircraft System Technologies, 26-27 March 2009, Hamburg, Germany

Kuschel, M.; Seume, J.R. (2009): Influence of the wakes of Rotating Spokes on the Performance of a Turbine Exhaust Diffuser, Proceedings of 9^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF9), 8-11 September 2009, Gyeongju, Korea, Paper No. isaif9-055

Gómez, A.; Seume, J.R. (2008): Rotor-Tower Interaction in HAWTs, Proceedings of 4^th PhD Seminar on Wind Energy in Europe, 1-2 October 2008, Magdeburg, Germany

Haslbeck, K.; Seume, J.R. (2008): Numerical Analysis of the Formation Process of Aerosols in the Alveoli, 61^st Annual Meeting of the APS Division of Fluid Dynamics, 23-25 November 2008, San Antonio, Texas, USA, Abstract in the Bulletin of the American Physical Society Vol. 53, Issue 15, p. 115

Henke, M; Guendogdu, Y.; Seume, J.R.; Siewert, C.; Panning, L.; Wallascheck J. (2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of Turbine Blading, Proceedings of 9^th International Conference on Vibrations in Rotating Machinery (IMechE), 08.- 10. September 2008, Exeter, UK

Beil, A.; Seume, J.R. (2006): Conceptual Analysis and Preliminary Design of a Centrifugal Compressor for an In-flight PEMFC Air Supply System, H2-Expo, International Conference and Trade Fair on Hydrogen and Fuel Cell Technologies, 25-26 October 2006, Hamburg, Germany

Seume, J.R.; Herbst, F.; Missirlis, D.; Yakinthos, K.; Goulas, A. (2006): Numerical Model of the Unsteady Interaction between Probe and Flow in Axial Turbomachinery, XVIII Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines, 21-22 September 2006, Thessaloniki, Greece

Shaaban, S.; Seume, J.R. (2006): Analysis of Turbochargers Non-Adiabatic Performance, Proceedings of 8^th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2006, London, UK, C647/027

Shaaban, S.; Seume, J.R.; Berndt, R.; Pucher, H.; Linnhoff, H.-J. (2006): Part-Load Performance Prediction of Turbocharged Engines, Proceedings of 8^th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2006, London, UK, C647/019

Kang, G.; Seume, J.R.; Gündogdu, Y.; Herzog, N.; Rothe, K. (2005): Development of a Measuring Technique for the Investigation of Windage Phenomena in a Four-Stage Air Turbine, Proceedings of 7^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 11-15 September 2005, Tokyo, Japan, Vol. 1, pp. 31-36

Pietrasch, R.Z.; Seume, J.R. (2005): Interaction between Struts and Swirl Flow in Gas Turbine Exhaust Diffusers, Proceedings of 7^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 11-15 September 2005, Tokyo, Japan, Vol. 1, pp. 37-42

Hagelstein, D.; Beyer, B.; Seume, J.R.; Rautenberg, M.; Hasemann, H.  (2002): Heuristical View on the Non-Adiabatic Coupling System of Combustion Engine and Turbocharger, Proceedings of 7^th International Conference on Turbochargers and Turbocharging (IMechE), 14-15 May 2002, London, UK, pp. 349-360

Mobarak, A.; Rautenberg, M.; Hagelstein, D. (2000): Energy and Environment in the Global World, 7^th International Conference on Energy and Environment, Cairo, Egypt, 11-13 March 2000

Sentker, A.; Riess, W.  (2000): Three Dimensional Unsteady Flow and Turbolence in a Two-Stage Axial Compressor, Proceedings of 9^th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, 4-8 September 2000, Lyon, France

Riess, W.; Walbaum, M. (1995): Initiation and Propagation of Flow Instabilities in Multi-Stage Axial Compressors, AGARD PEP 85^th Symposium on “Loss Mechanisms and Unsteady Flows in Turbomachines”, 8-12 May 1995, Derby, UK

Janssen, M.; Seume, J.R.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E. (1993): Flow Field Analysis of the Axial Compressor of the Siemens V84.3., 20^th International Congress on Combustion Engines (CIMAC), 1993, London, UK

Beale, W.T.; Seume, J.R. (1989): Solar-Powered Free-Piston Stirling Generator, 4. Jahreskongress des International Hightech-Forum Basel „Umwelt und regenerative Energie-Sonnenenergie und solarer Wasserstoff“, 30 November - 01 December 1989, Basel, Switzerland

Seume, J.R.; Simon, T.W. (1988): Effect of Transition on Oscillating Flow Losses in Stirling Engine Coolers and Heaters, 23^th Intersociety Energy Conversion Engineering Conference, 1988, New York, New York, USA, pp. 127-132

Goldberg, L.F.; Seume, J.R.; Simon, T.W. (1987): Description of an Oscillating Flow Test Program, 22^th Intersociety Energy Conversion Engineering Conference, 1987, New York, New York, USA, pp. 1753-1758

Seume, J.R.; Simon, T.W.  (1986): Oscillating Flow in Stirling Engine Heat Exchangers, 21^th Intersociety Energy Conversion Engineering Conference, 1986, Washington D.C., USA, pp. 533-538

Nationale wissenschaftliche Beiträge in Fachzeitschriften, nicht begutachtet

Kwitschinski, T.; Henke, M.; Bartelt, M. Seume, J.R. (2020): Ventilation im Teil- und Schwachlastbetrieb von HD- und ND-Dampfturbinen, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 379-394
ISBN: 978-3-944310-04-6

Willeke, T.; Herbst, F; Seume, J.R. (2016): Strömungsbeeinflussung für zukünftige Flugtriebwerke, Ingenieurspiegel, Ausgabe März 2016

Müller, C.; Herbst, F; Seume, J.R. (2015): Turbomaschinen in Flugzeugen: Entwicklung, Optimierung und Regeneration für Flugtriebwerke und Kompressoren, Ingenieurspiegel, Ausgabe März 2015

Schmidt, B.; Ernst, B.; Wilms, M.; Hildebrandt, A.; Hansen, M.  (2014): Messdatenbasierte Empfehlungen von Wind- und Wellenparametern für die Auslegung von Offshore-Windenergieanlagen, Bautechnik, 91: 533-542
DOI: 10.1002/bate.201400033

Rolfes, R.; Schaumann, P.; Seume, J.R., et al. (2009): Windenergieforschung an der Leibniz Universität Hannover, Unimagazin Hannover, Ausgabe 1/2-2009

Seume, J.R.; Kuschel, M. (2009): Einsatzfeld Turbomaschinen – Effiziente Turbinen für Umweltfreundliche Kraftwerke, Unimagazin Hannover, Ausgabe 1/2-2009

Seume, J.R.; Wark, M.; Kleppa, O. (2009): Brennstoffzellen – Saubere und effiziente Stromproduktion der Zukunft, Unimagazin Hannover, Ausgabe 1/2-2009

Nationale Konferenzbeiträge, nicht begutachtet

Amer, M.; Maroldt, N.; Seume, J.R. (2020): Investigation of Multiharmonic Effects in a Single Stage High Speed Compressor, Deutscher Luft- und Raumfahrtkongress 2019, Darmstadt, Deutsche Gesellschaft für Luft- und Raumfahrt
DOI: 10.25967/490212

Kleppa, O.; Henke, M.; Seume, J.R. (2020): Verbesserte Nutzung betriebs-beanspruchter Bauteile durch gezielte Regeneration, Deutscher Luft- und Raumfahrtkongress 2010

Willeke, S.; Schmolke, D.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J.R. (2020): Mistuning mit Aero-Kopplung II - Abschlussbericht No 1269, FVV-Informationstagung Turbomaschinen, Forschungsvereinigung Verbrennungskraftmaschinen, Würzburg

Oettinger, M.; Prohaska, P.; Schwerdt, L.; Panning-von Scheidt, L.; Herbst, F.; Seume, J.R. (2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen Aeroderivaten, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019 (Kraftwerkstechnisches Kolloquium, Dresden)
ISBN: 3934409938

Schwerdt, L.; Seume, J.R. (2018): Implementation and Experimental Verification of Active Flow Control by Jet Injection over a Coanda Surface in a Multi-Stage High-Speed Axial Compressor, 5th International Conference on Experimental Fluid Mechanics ICEFM 2018 Munich, Germany, July 2-4, 2018

Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2017): Kompakte elektrisch angetriebene Turbokompressoren für ein aktives Hochauftriebssystem künftiger Verkehrsflugzeuge, E-MOTIVE Expertenforum, 5-6 September 2017, Hannover, Germany

Neben, M., Zaussinger, F., Schwarzbach, F., Egbers, Ch. (2017): Numerische Simulation der Kavitationsbildung in schnellrotierenden hydrodynamischen Gleitlagern, Kolloquium Fluidenergiemaschinen - FEM 2017, 02. - 03.03.2017

Willeke, T.; Seume, J.R. (2017): Verbessertes Teillastverhalten mehrstufiger Axialverdichter durch gezielte Strömungsbeeinflussung, LiFE 2050 - Tag der Energieforschung 2017, 4 Mai 2017, Leibniz Universität Hannover

Fräger, L.; Brand, C.R.; Seume, J.R. (2016): Robustheit des Delay-and-Sum-Beamformers gegenüber fehlerbehafteten Eingangsgrößen, 42. Jahrestagung für Akustik – DAGA 2016, Aachen

Langer, S; Ring, T.; Hurfar, M.C.; Seume, J.R. (2016): Erfahrung mit der interdisziplinären und standortübergreifenden Vorlesung "Einführung in die Technische Akustik", 42. Jahrestagung für Akustik – DAGA 2016, Aachen

Schwerdt, L.; Siemann, J.; Seume, J.R.  (2016): Active Flow Control Implemented in a Multi-Stage High-Speed Axial Compressor, 87^th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung(DMV), Proceedings in Applied Mathematics and Mechanics (PAMM), 07-11 March 2016, Braunschweig
DOI: 10.1002/pamm.201610311

Brand, C.R.; Seume, J.R.  (2015): Einfluss unterschiedlicher Datenbearbeitung bei der Schallquellenlokalisierung an Klappen für Windenergieanlagen , 41. Jahrestagung für Akustik – DAGA 2015, Nürnberg

Drechsel, B.; Herbst, F.; Seume, J.R.  (2015): Instationäre Validierung von PIV-Messungen in einem skalierten Abgas-Ringdiffusor einer Gasturbine, In: Beckmann, M., Hurtado, A.; Kraftwerkstechnik 2015 - Strategien, Anlagentechnik und Betrieb; SAXONIA Verlag, S. 489-453

Hennecke, C.; Hartmann, U.; von der Haar, H.;Dinkelacker, F.; Seume, J.R.  (2015): Correlation of Defects in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases and Numerical Analysis, 64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015, Rostock

Hurfar, M.; Seume, J.R. (2015): Untersuchung des Einflusses von Schutzgittern für Mikrofone in einem Hochgeschwindigkeits-Windkanal, 41. Jahrestagung für Akustik – DAGA 2015, Nürnberg

Kellersmann, A.; Gilge, P.; Seume J.R.; Friedrichs J. (2015): Performance Impact of High Pressure Compressor Blisk Roughness, 64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015, Rostock, Germany

Mumcu, A.; Thouault, N.; Broszat, D.; Seume, J.R. (2015): Experimenteller Aufbau zu Untersuchungen der Modenausbreitung in Niederdruckturbinengittern, 41. Jahrestagung für Akustik – DAGA 2015, Nürnberg

Willeke, S.; Meinzer, C.; Panning-von Scheidt, L.; Schönenborn, H. (2015): Mistuning aerodynamisch und strukturmechanisch gekoppelter Beschaufelungen, FVV Zwischenbericht, Heft R 573 (Herbsttagung 2015), Würzburg

Brand, C.R.; Seume, J.R.  (2014): Quantifizierung der globalen Schallemission eines skalierten Flügelprofils mit Hinterkantenklappe für Windenergieanlagen, 40. Jahrestagung für Akustik – DAGA 2014, Oldenburg

Freund, O.; Meinzer, C.E.; Seume J.R. (2014): Validierung und Einsatz eines optischen Tip-Timing Systems in einem Axialverdichter, Zustandsbewertung in der Energie- und Anlagentechnik, Fachtagung TÜV Süd, 19.-20. March 2014, Munich

Koupeny, J.; Bresemann, D.; Meinzer, C.; Mertens, A.; Ponick, B.; Seume, J.R.  (2014): Universelles Werkzeug zur Steigerung der Energieeffizienz von technischen Prozessen am Beispiel eines Prozesskühlsystems mit elektrischer Antriebstechnik, SIMPEP Kongress, 17-18 September 2014, Koblenz/Lahnstein

Kwitschinski, T.; Gustav, D.; Gerkens, P.; Seume, J. (2014): Einfluss der Filletgeometrie auf die Ausbildung von Sekundärströmungen in einer Turbinenstufe, Beckmann, M.; Hurtado, A. (Hrsg.): Kraftwerkstechnik 2014 - Strategien, Anlagentechnik und Betrieb.
ISBN: 978-3-934409-64-4

Meinzer, C.E.; Schmitt, S.; Seume, J.R. (2014): Akustische Anregung von Schaufelschwingungen, 14. Statusseminar der AG Turbo, Verbundprojekt für das emissionsarme Kraftwerk „AG Turbo 2020“, 8-9 Dezember 2014, DLR, Köln-Porz

Meinzer, C.E.; Wolff, T.; Hauptmann, T.; Seume, J.R. (2014): Aeroelastic Analysis of Turbomachinery using TRACE, TRACE User Conference, 24-27 March 2014, Cologne

Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Beurteilung von Störungen in Flugtriebwerken, 2. Kolloquium des SFB 871 - Zukünftige Regenerationstechnologien, 12. November 2013, Hannover

Bartelt, M.; Witthaus, S.; Seume, J.R. (2013): Experimentelle Untersuchungen an einem Aeroakustik-Windkanal für Turbomaschinenanwendungen - Eine Übersicht über aktuelle Entwicklungen, DGLR-/DEGA-Workshop "Simulation und Validierung bei Strömungsschallproblemen in der Luftfahrt, Fahrzeug- und Anlagentechnik", 20-21 November 2013, München

Drechsel, B.; Hohenstein, S.; Aschenbruck, J.; Seume, J.R. (2013): Einfluss betriebs- und regenerationsbedingter Varianzen von Turbinenschaufeln, VGB-Fachtagung “Gasturbinen und Gasturbinenbetrieb 2013”, 11 June 2013, Friedrichshafen

Drechsel, B.; Seume, J.R. (2013): Verbesserung des Druckrückgewinns in Axialdiffusoren für GuD-Kraftwerke, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 445-459, ISBN: 978-3-944310-04-6.

Ernst, B.; Seume J.R. (2013): Investigation of Structural Uncertainty of Wind Turbine Rotor Blades, 6. Dresdner Probabilistik-Workshop, 10-11 Oktober 2013, Technische Universität Dresden

Hohenstein, S.; Gilge, P.; Raulf, C.; Seume, J.R. (2013): Einfluss lokaler Rauheiten auf die aerodynamischen Verluste von Turbinenschaufeln, Deutscher Luft- und Raumfahrtkongress 2013, 10-12 September, Stuttgart

Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J.R. (2013): Steigerung der Energieeffizienz durch intelligente Nutzung elektrischer Antriebssysteme, ETG Kongress, 5-6 November 2013, Berlin

Seume, J.R.; Teichel, S.H.; Burnazzi, M.; Schwerter, M.; Behr, C.; Rudenko, A.; Schmitz, A.; Dörbaum, M.; Atalayer, C. (2013): SFB 880 – Efficient High Lift, 62. Deutscher Luft- und Raumfahrtkongress 2013, 10-12 September, Stuttgart, Deutschland, DLRK2013_301273

Tesch, M.; Aschenbruck, J.; Hohenstein, S.; Schmidt, A.; Seume, J.R. (2013): Technik entdecken - Schüler-Lehrer-Tag an der Universität Hannover, Gesellschaft für Didaktik der Chemie und Physik Jahrestagung in Hannover 2012

Eilts, P.; Gehrke, S.; Kaack, M.; Sourell, R.; Wolf, R.; Munack, A.; Pabst, C.; Krahl, J.; Montenegro, R.E.; Meier, M.A.R.; Brümmer, A.; Hütker, J.; Nikolov, A.; Seume, J.R.; Kunte, H. (2012): Motorenentwicklung im Nutzfahrzeug, 1. VDI-Konferenz, 27-28 September 2012, Stuttgart

Seume, J.R.; Müller-Kirchenbauer, J.; Kurrat, M.; Biester, M. H.-O; Munzel, B.; Derlien, H. (2012): Power-to-Gas-to-Power - Schnittstellendynamik bei der Einspeisung und Rückwandlung elektrolytisch erzeugten Wasserstoffs in das Gasnetz, Kraftwerkstechnisches Kolloquium, 23–24 Oktober 2012, Dresden

Bartelt, M.; Seume, J.R. (2011): Auslegung und Optimierung eines Aeroakustik-Kanals für Turbomaschinenanwendungen unter Verwendung numerischer Methoden, Deutscher Luft- und Raumfahrtkongress 2011, 27-29 September, Bremen

Lietmeyer, C.; Hohenstein, S.; Naschilevski, S.; Seume, J.R. (2010): Einfluss von Riblet-Strukturen auf den Wirkungsgrad eines Hochgeschwindigkeits-Axialverdichters, Deutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg

von Seggern, H.G.; Seume, J.R.  (2010): Verlaufskontrolle von Lungenkrankheiten anhand exhalierter Aerosole, 28. DECHEMA-Jahrestagung der Biotechnologen, 23 September 2010, Aachen

Vorreiter, A.; Seume, J.R. (2010): Numerische Untersuchungen zum Wirkungsgrad von aktiver Strömungsbeeinflussung im Stator eines mehrstufigen Axialverdichters, Deutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg

Gomez, A.; Seume, J.R. (2009): Aerodynamische Turmbelastung (Poster-Beitrag), Offshore-Windenergie-Kolloquium – ForWind., 4. June 2009, Hanover

Vorreiter, A.; Ziesenis, B.; Seume, J.R. (2007): Studie TC-Lagerreibung Vorhaben Nr. 908 – Untersuchung und empirische Modellbildung des Reibmomentes von Turboladerlagerungen, FVV Informationstagung Motoren/Turbomaschinen, Heft R 537 (2007), Frankfurt

Ziesenis, B.; Gündogdu, Y.; Seume, J.R. (2007): Vorstudie Einlaufgeometrie Vorhaben Nr. M1502 – Untersuchung des Einflusses der Verdichter-Einlaufgeometrie auf das Betriebsverhalten von Abgasturboladern, FVV Informationstagung Motoren/Turbomaschinen, Heft R 537 (2007), Frankfurt

Seume, J.R. (2006): Brechungsindex und Dichtebestimmung mit der BOS-Methode (Backround Oriented Schlieren Method), Measurement, 15-16 February 2006, Göttingen

Seume, J.R. (2006): Aktuelle Entwicklungstendenzen stationärer Gasturbinen aus Sicht der Forschung, 5. VDI Fachtagung: Stationäre Gasturbinen im Fokus von Wirtschaftlichkeit, Sicherheit und Klimaschutz, 21-22 November 2006, Leverkusen

Sieker, O.; Kluß, D.; Becker, S.; Wiedermann, A. (2006): Hocheffiziente Turbinendiffusoren, 10. Statusseminar der AG Turbo, Verbundsprojekt CO₂-Reduktion durch Effizienz „COOREFF-T“, 6-7 December 2006, DLR, Köln-Porz

Keppel, W.; Niehuis, R.; Seume, J.R. Weyer, H. (2004): Forschungskonzepte für Turbinenschaufeln, VDI-Tagung: Effizienzsteigerung von konventionellen und nuklearen Kraftwerken, 18-19 November 2004, Köln, VDI-Bericht 1862, S. 161-175

Abdelhamid, S.; Berndt, R.; Grigoriadis, P.; Hagelstein, D.; Nickel, J.; Pucher, H.; Seume, J.R. (2003): Erweiterte Darstellung und Extrapolation von Turbolader-Kennfeldern als Randbedingung der Motorprozesssimulation, 5. Internationales Stuttgarter Symposium zu Kraftfahrwesen und Verbrennungs­motoren, 18-20 February 2003, Stuttgart

Fleige, H.-U.; Pietrasch, R.Z.; Rieß, W.; Seume, J.R.  (2003): Optimierung von Turbinenaustrittsdiffusoren zur Wirkungsgradverbesserung, VDI-Tagung: Retrofit, 3-4 Juni 2003, Hannover, VDI-Bericht 1769

Levy, Y.; Pismenny, J.; Reissner, A.; Riess, W.  (2001): Relationship between Frequencies of Pressure Oscillations and Rotor Speed under Established Rotating Stall in Axial Compressors, Turbokompressoren im industriellen Einsatz, Tagung Duisburg, 18-19 September, Duisburg, VDI-Bericht 1640

Hagelstein, D.; Beyer, B.; Lübke, H.-P.; Hasemann. H.; Baar, R.; Rautenberg M. (2000): Thermodynamik und Energietransport bei Abgasturboladern unterschiedlicher Regelungen, Haus der Technik Tagung: Aufladung von Verbrennungsmotoren, 30-31 March 2000, Berlin, Nr. E-H030-03-020-0

Runkel J.; Stegemann, D.; Fiedler, J.; Heidemann, P.; Blaser, R.; Schmidt, F.; Trobitz, M.; Hirsch, L.; Thoma, K. (2000): Schwingungs- und Körperschallmessungen in Siedewasserreaktoren bei Leistungsbetrieb, Jahrestagung Kerntechnik, 23-25 Mai 2000, Bonn

Veröffentlichte Berichte

Kluge, T.; Wein, L.; Oettinger, M.; Seume, J.R.  (2020): Abschlussbericht: AG Turbo COOREflex-turbo Vorhaben 4.2.5a: Optimaler Deckbandrückschnitt bei Turbinenlaufschaufeln, Leibniz Universität Hannover, Garbsen

Willers, O.; Zeh, C.; Schwarze, H.; Seume, J.R. (2020): Thermally influenced TC Bearing Friction, Final Report H1219-V1238, Forschungsvereinigung Verbrennungskraftmaschinen e.V., Frankfurt a. M.

Schwarzbach, F.; Herbst, F.; Seume J. R.; (2019): Skalenauflösende Simulationen zur Untersuchung des aeroelastischen Verhaltens von Turbomaschinen, Forschung im HLRN-Verbund 2019, Herausgeber: Konrad-Zuse-Zentrum für Informationstechnik Berlin, Berlin
ISBN: 978-3-00-063360-7

Willers, O.; Seume, J.R. (2018): ORC-Turbinen-Generatoreinheit für Lkw, Stahl-Innovationspreis 2018, Herausgeber: Wirtschaftsvereinigung Stahl, Düsseldorf, S. 38-39

Kauth, F.; Narjes, G.; Müller, J.; Ponick, B.; Mertens, A.; Seume, J.R. (2017): Compact Electrical Compressors for Active Flow Control in Autonomous High-Lift Systems, "SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft: Biennial Report", Rolf Radespiel, Richard Semaan, TU Braunschweig, Braunschweig

Kunte, H.; Willers, O.; Peters, M.; Seume, J.R. (2017): Expansionsmaschine (CO2-Programm), FVV-Abschlussbericht, H 1139 (2017), Frankfurt

Denkena, B. (2015): vStruct-virtuelle Optimierung der Fertigung lokal angepasster Riblet-Strukturen auf einer dreidimensionalen Turbomaschinenbeschaufelung , Abschlußbericht 2015, Hrsg.: Berend Denkena, PZH Verlag, Seite 339-372, Pro³gression diligent production, ISBN 978-3-95900-030-7

Seume, J.R.; Drechsel, B.  (2015): Einfluss von Stützrippen auf die Sekundärströmung in Turbinendiffusoren, AG Turbo Abschlussbericht

Teichel, S.H.; Dörbaum, M.; Ponick, B.; Seume, J.R. (2015): Compact Dynamic Compressors for Active Flow Control in High-Lift Configurations, "SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft: Biennial Report", Rolf Radespiel, Richard Semaan, TU Braunschweig, Braunschweig

Rätz, H.; kleine Sextro, T.; Lübbert, N.; Seume, J.R. (2014): Modellierung der Wärmeströme in der Welle eines Turboladers basierend auf CHT-Simulationen, FVV Abschlussbericht, Heft R 571 (2014), Frankfurt

Teichel, S.H.; Seume, J.R.; Dörbaum, M.; Ponick, B.  (2013): Compact Dynamic Compressors for Active Flow Control in Autonomous High Lift Configurations, SFB 880 - Fundamentals of High Lift for Future Commercial Aircraft Biennial Report. Braunschweig: TU Braunschweig - Campus Forschungsflughafen
ISBN: 978–3–928628–63–1

Herbst, F.; Eilts, P.; Porzig, D.; Schwarze, H.; kleine Sextro, T; Seume, J.R. (2012): Grundlegende Technologien zur Hochaufladung von Fahrzeugmotoren, NTH-Abschlussbericht (BU 2.2.4)

Seume, J.R.; Kuschel, M. (2011): Sekundärströmungen in Turbinendiffusoren, Abschlussbericht, Forschungsvorhaben 0327717B, Vorhaben-Nr.: 4.2.9 der AG Turbo COORETEC-turbo, December 2011

Seume, J.R.; Sieker, O. (2008): Hocheffiziente Turbinendiffusoren – Teil A: Experimentelle Untersuchungen, Abschlussbericht, Forschungsvorhaben 0327720E, Vorhaben-Nr.: 4.2.8.A der AG Turbo COOREFF-T, April 2008, Verbundprojekt CO₂-Reduktion durch Effizienz

Müller, D.; Grigoriadis, P. (2007): Dynamische Pumpgrenze Vorhaben Nr. 845 – Dynamisches Verhalten von Turboladern nahe der Pumpgrenze, FVV Abschlussbericht, Heft 833 (2007), Frankfurt

Seume, J.R.; Goldhahn, E.; Steglich, T.; van den Braembussche, R.A.; Prinsier, J.; Alsalihi, Z.; Verstraete, T.  (2007): Vorleitradoptimierung II Vorhaben Nr. 846 – Strömungsvorgänge zwischen Vorleitapparat und Laufrad eines Radialverdichters und ihre gegenseitige Beeinflussung, FVV Abschlussbericht, Heft 838 (2007), Frankfurt

Braun, M. (2005): Vorwärtsgepfeilte AV-Beschaufelung, Vorhaben Nr. 800 – Experimentelle Untersuchung einer vorwärts gepfeilten Beschaufelung in einem mehrstufigen Axialverdichter, FVV Abschlussbericht, Heft 808 (2005), Frankfurt

Steglich, T; Seume, J.R.; Shaaban, S. (2005): Radialverdichterkennfeld Vorhaben Nr. 823 – Erstellung einer Kennfeldberechnungsmethode zur Inter- und Extrapolation des gemessenen Radialverdichterkennfeldes anhand vorhandener FVV-Ergebnisse, FVV Abschlussbericht, Heft 813, Heft R 529 (2005), Frankfurt, S. 119-138

Seume, J.R. (2004): Beitrag der AG Turbo zur Wirkungssteigerung von Gasturbinen, Beitrag in: „Stationäre Gasturbinen: Fortschritte und Betriebserfahrungen“, Hrsg.: VDI-Gesellschaft Energietechnik, Düsseldorf: VDI-Verlag 2004, VDI-Bericht Nr. 1857

Seume, J.R. (2004): Forschungskonzepte für Turbinenschaufeln, Beitrag in: Keppel, W., Niehuis, R., Weyer, H.: „Effizienzsteigerung von konventionellen und nuklearen Kraftwerken“, Hrsg.: VDI-Gesellschaft Energietechnik, Düsseldorf: VDI-Verlag 2004, VDI-Bericht Nr. 1862, S. 161/175

Steglich, T.; Kitzinger, J.; Seume, J.R.; van den Braembussche, R.; Prinsier, J. (2003): Strömungsvorgänge in spiralförmigen Sammelräumen für Radialverdichterstufen, FVV Abschlussbericht, Heft 773 (2003), Frankfurt

Seume, J.R.; Pucher, H.; Bohn, D. (2002): TC-Gesamtkennfeldbestimmung / TC-Wärmeströme – Erweiterte Darstellung und Extrapolation von Turbolader-Kennfeldern als Randbedingung der Motorprozesssimulation / Modellierung des Wärmeflusses im und am System Turbolader., FVV Abschlussbericht, Heft R 517 (2002), Frankfurt, S. 39-62

Fischer, A.; Seume, J.R. (2001): Bow-Beschaufelung Vorhaben Nr. 737 – Numerische und experimentelle Untersuchung von Bow-Statoren in einem hochbelasteten Axialverdichter, FVV Abschlussbericht 2001, Frankfurt

Hagelstein, D.; Prinsier, J.; Van den Braembussche, R.A. (2001): Vorleitradoptimierung I Vorhaben Nr. 705 – Vorleitrad - Laufrad Strömungsoptimierung und Interaktion, FVV Abschlussbericht, Heft 705 (2001), Frankfurt

Gehring, S.; Rieß, W. (2000): 2d-FE-Verfahren für die Kennfeldberechnung von vielstufigen Turbinen mit unter- und überkritischen Stufendruckverhältnissen mit variabler Kühlluftzufuhr, Abschlußbericht zum Vorhaben 1.312 im Teilverbund-Projekt Turbotech der Arbeits­gemeinschaft Hochtemperatur-Gasturbine

Ayder, E.; Hillewaert, K.; Van den Braembussche, R.; Zeoli, D.; Seidel, U.; Hagelstein, D. (1998): Spiralströmungen I Vorhaben 606 – Strömungsvorgänge in spiralförmigen Sammelräumen für Radialverdichter, FVV Abschlussbericht, Heft 606 (1998), Frankfurt

Gehring, S.; Rieß, W.  (1995): Modelle zur Bestimmung der Stabilitätsgrenze von Axialverdichtern, VDI Berichte Nr. 1208, S. 221-235

Janssen, M.; Seume, J.R.; Zimmermann, H.  (1994): Strömungsanalyse der Einzelstufen einer mehrstufigen Turbine und eines mehrstufigen Verdichters einer Gasturbine zur Verbesserung der Strömungsrechenverfahren, Abschlussbericht zum Vorhaben HTGT-Turbotech 1.1.1.1 / 1.1.1.3., Siemens AG, Bereich Energieerzeugung (KWU)

Jetter, Ch.; Riess, W.  (1994): Strömungstechnische Eigenschaften von Turbinenschaufelprofilen unterschiedlicher Fertigungsqualitäten, VDI Berichte Nr. 1109, S. 241-259

Bigalk, J.; Riess, W. (1992): Experimentelle und numerische Untersuchung der Seitenwand-Grenzschicht in einer Axialverdichterstufe, VDI Berichte Nr. 947, S. 19-40

Seume, J.R.; Friedman, G.; Simon, T.W. (1992): Fluid Mechanics Experiments in Oscillatory Flow, NASA Contractor Report 189127, March 1992

Rautenberg, M., Haupt, U., Hasemann, H. (1990): Schwingungserregung bei Radialverdichterrädern – Dimensionierungskriterien bei der Festigkeitsauslegung, FVV Abschlussbericht zum Vorhaben Nr. 396, Heft Nr. 456 (1990), Frankfurt

Dissertationen

Bittner, S. (2020): Experimentelle Validierung numerischer Optimierungen des Schaufelpfades einer Hochdruck-Dampfturbine, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvii, 109, ix S.
DOI: https://doi.org/10.15488/9985

Hartmann, U. (2020): Auflösung und Zuordnung von Defekten im Heißgaspfad von Flugtriebwerken anhand der Dichteverteilung im Abgasstrahl, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xx, 116 S., Anh.
DOI: https://doi.org/10.15488/9979

Hauptmann, T. (2020): Einfluss regenerationsbedingter Varianzen der Schaufelgeometrie auf erzwungene Schwingungen in einer mehrstufigen Turbine, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvi, 141 S.
DOI: https://doi.org/10.15488/9974

Meinzer, C. (2020): Quantifizierung der aerodynamischen Dämpfung, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvii, 152 S.
DOI: https://doi.org/10.15488/9800

Wein, L. (2020): Large-Eddy-Simulation von Deckbandlabyrinthdichtungen, Large-Eddy-Simulation von Deckbandlabyrinthdichtungen. Hannover : Gottfried Wilhelm Leibniz Universität, Diss., 2020, xviii, 167 S.
DOI: https://doi.org/10.15488/10202

Kunte, H. (2019): Kennfelderweiterung einer supersonischen axialen Impulsturbine durch variable Teilbeaufschlagung, München : Verlag Dr. Hut, 2019, VIII, 151 S.
ISBN: 978-3-8439-4001-6

Cengiz, K. (2018): Use of Detached Eddy Simulation for Aerodynamics and Aeroacoustics of Blade Sections, Middle East Technical University, Graduate School of Natural and Applied Sciences, Ankara, Turkey

Flores, D. (2018): Influence of labyrinth seals in cavities on the flow of an axial compressor, Hannover: Institut für Turbomaschinen und Fluid-Dynamik, 2018 (Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik ; 13), xxiv, 159 S.
DOI: https://doi.org/10.15488/3681

Teichel, S. H. (2018): Optimized design of mixed flow compressors for an active high-lift system, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 12/2018
DOI: 10.15488/3524

Brand, C.R. (2017): Zur Schallentstehung an den Seitenkanten von Wölbklappen für Windenergieanlagen, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 11/2017

Biester, M. (2016): Ausmischverluste und instationärer Arbeitsumsatz in Turbinen, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 10/2016

Laguna, J.D. (2016): On the Sensitivity of the Radial Mode Analysis (RMA) for the Experimental Evaluation of Sound Propagation in a Low-Pressure Turbine, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 9/2016

Lin, S.Y. (2016): Coherent Structures and Rotational Effects on the Flow over Spinners of Horizontal Axis Wind Turbine, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 8/2016

Bartelt, M. (2015): Ein Beitrag zum Ausbreitungsverhalten modaler Schallfelder in Niederdruckturbinen, Leibniz Universität Hannover, Berichte aus Turbomaschinen und Fluid-Dynamik, Band 7/2015

Czapka, T.  (2015): Erweiterung des Verdichterkennfeldes eines Abgasturboladers für verbrauchsoptimierte Verbrennungsmotoren, AutoUni – Schriftenreihe Band 77, Logos Verlag Berlin

Freund, O. (2015): Akustische Anregung von Schaufelschwingungen in Turbomaschinen, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 5/2014

Adamczuk, R. (2014): Zustandsbeurteilung eines Triebwerks durch die Analyse des Abgasstrahls, Dissertation, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 6/2014

Hohenstein, S.  (2014): Einfluss komplexer Oberflächenstrukturen auf das aerodynamische Verlustverhalten von Turbinenbeschaufelungen, Dissertation, Leibniz Universität Hannover, Berichte aus Turbomaschinen und Fluid-Dynamik, Band 4/2014

Kuschel, M. (2014): Einfluss von Sekundärströmungen auf den Druckrückgewinn in Axialdiffusoren, Dissertation, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 3/2014

Peter, J. (2014): Numerische Untersuchung und Optimierung des Laufrades einer Pkw-Abgasturboladerturbine, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 05/2014

Schnückel, C.  (2014): Numerische Simulation und Optimierung der Anströmung einer Abgasturboladerturbine, AutoUni – Schriftenreihe Band 59, Logos Verlag Berlin

Herbst, F. (2013): Modellierung des Einflusses von Ausblasungen auf die Grenzschichttransition in hochbelasteten Niederdruckturbinen, Dissertation, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 2/2013

Lietmeyer, C. (2013): Berechnungsmodell zur Widerstandsbeeinflussung nicht-idealer Riblets auf Verdichterschaufeln, Dissertation, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 1/2013

Alhaj, O. (2012): Optical Investigation of Profile Loss in a Linear Turbine Cascade, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3-8439-0588-6

Kleppa, O. (2012): Blow-By in Abgasturboladern, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3-8439-0675-3

Natkaniec, C. (2012): Sekundärströmungen in Turboladerturbinen mit variabler Turbinengeometrie, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3843907590

Vorreiter, A. (2012): Aktive Strömungsbeeinflussung im Stator eines mehrstufigen Axialverdichters, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3843906241

Binner, M. (2011): Experimentelle Untersuchung von Teil- und Schwachlastzuständen in Hochdruckdampfturbinen, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3-86853-815-1

Frese, F. (2011): Aerodynamische und strukturmechanische Bewertung des Flutenteilers an Radialturbinen von Turboladern, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3868539479

Haslbeck, K. (2011): Entstehung exhalierter Tröpfchen in den terminalen Atemwegen, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München, ISBN: 978-3-86853-924-0

Kammeyer, J. (2011): Abgasturbolader mit Deckband zur Verringerung der turbinenseitigen Spaltverluste, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3843902465

Oehlert, K. (2011): Zur Applikation von Riblets auf Verdichterschaufeln, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3-8439-0003-4

Opilat, V. (2011): Swirl and Blade Wakes in the Interaction between Gas Turbines and Exhaust Diffusers Investigated by Endoscopic Particle Image Velocimetry, Dissertation, Leibniz Universität Hannover

Gòmez Gonzàlez, A. (2010): Aerodynamic and Aeroelastic Rotor-Tower Interaction in Horizontal Axis Wind Turbines , Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-386-85374-8-2

Imetovski, E. (2010): Anwendung der Infinite-Tube-Technique zur instationären Druckmessung in der Radialturbine eines Abgasturboladers, Dissertation, Leibniz Universität Hannover, Cuvillier Verlag, Göttingen
ISBN: 978-3-86955-458-7

Mohseni, A. (2010): Development of Endoscopic Stereoscopic PIV for Investigating the IGV-Impeller Interaction in a Centrifugal Compressor, Dissertation, Leibniz Universität Hannover, Südwestdeutscher Verlag für Hochschulschriften
ISBN: 978-3838123943

Sieker, O. (2010): Einfluss von Drall und Nachlaufdellen auf Strömung und Druckrückgewinn in axialen Turbinenaustrittsdiffusoren, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3-86853-465-8

Goldhahn, E. (2009): Weiterentwicklung der Hintergrundschlierenmethode zu einem quantitativen Verfahren der Vermessung von Dichtefeldern, Dissertation, Leibniz Universität Hannover

Gündogdu, Y. (2009): Aktive Strömungsbeeinflussung unter Nutzung des Coanda-Effekts in einem Hochgeschwindigkeits-Axialverdichter, Dissertation, Leibniz Universität Hannover

Barchewitz, L.P. (2008): In-Flight Air Supply System for PEM Fuel Cells, Dissertation, Leibniz Universität Hannover

Braun, M. (2008): Vorwärtspfeilung in einem mehrstufigen hochbelasteten Axialverdichter, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3-89963-731-1

Fischer, K. (2008): Instationäres Betriebsverhalten und thermomechanische Beanspruchung tubularer Festoxidbrennstoffzellen, Dissertation, Leibniz Universität Hannover

Griebel, A. (2008): Instationäre Untersuchungsmethoden der saugseitigen Statorgrenzschicht in einem Niedergeschwindigkeitsaxialverdichter, Dissertation, Leibniz Universität Hannover

Hellmich, B. (2008): Acoustic Resonance in a High-Speed Axial Compressor, Dissertation, Leibniz Universität Hannover

Herzog, N. (2008): Numerische Untersuchung von Schwachlastströmungen in mehrstufigen Axialturbinen, Dissertation, Leibniz Universität Hannover, Universitätsbibliothek u. Technische Informationsbibliothek

Kanzer, S. (2008): Strömungs- und Verbrennungsdynamik eines drallstabilisierten Gasturbinenbrenners, Dissertation, Leibniz Universität Hannover, Cuvillier Verlag, Göttingen
ISBN: 978-3-86955-161-6

Müller, D. (2008): Einfluss der Anordnung und des Betriebs auf die Pumpgrenze von Abgasturboladern, Dissertation, Leibniz Universität Hannover

Reissner, A. (2008): Stabilitätsverbessernde Maßnahmen in Axialverdichtern, Dissertation, Leibniz Universität Hannover

Schreyer, B.  (2008): Verlustverhalten fräsrauer Turbinen- und Verdichtergitter, Dissertation, Leibniz Universität Hannover

Steglich, T. (2007): Experimentelle Untersuchungen zum Verbesserungspotential einer Radialverdichterstufe mit interner Spirale, Dissertation, Leibniz Universität Hannover

Kang, G. (2006): Strömungsmechanische Untersuchungen in einer Axialturbine im Ventilations- und Leerlaufbetrieb, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 3-89963-297-4

Moreno, L. (2006): Numerische Untersuchung des Clocking-Effekts auf die Hinterkantenausblasung an einer zweistufigen Axialturbine, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 483, Düsseldorf: VDI-Verlag
ISBN: 3-18-348307-6

Bubolz, T. (2005): Untersuchungen von randzonenkorrigierten Axialverdichterbeschaufelungen mit Strömungs-Meßsonden, Dissertation, Leibniz Universität Hannover, Cuvillier Verlag, Göttingen
ISBN: 3-86537-457-3

Fischer, A. (2004): Untersuchungen hochbelasteter Bow-Statoren in einem mehrstufigen Axialverdichter, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 3-89963-143-9

Shaaban, S. (2004): Experimental Investigation and Extended Simulation of Turbocharger Non-Adiabatic Performance, Dissertation, Leibniz Universität Hannover

Klinge, F.  (2003): Vermessung von Wirbeln mit der Hintergrundschlieren-Methode: Untersuchung der räumlichen Position und Stärke des kompressiblen Tragflächenspitzenwirbels des Außenflügels eines Transportflugzeuges mit einer stereoskopischen Hintergrundschlieren-Methode und der Stereo Particle Image Velocimetry, Dissertation, Leibniz Universität Hannover

Shieh, T.-H.  (2003): Untersuchung von Axialturbinen-Beschaufelungen mit dreidimensionalen Gestaltungselementen, Dissertation, Leibniz Universität Hannover

Fiedler, J.  (2002): Schwingungsüberwachung von Primärkreiskomponenten in Kernkraftwerken, Dissertation, Leibniz Universität Hannover, Universitätsbibliothek u. Technische Informationsbibliothek

Fleige, H.-U. (2002): Experimentelle und numerische Untersuchungen am Model eines Turbinenaustrittsdiffusors, Fortschritt-Berichte VDI: Reihe 7, Nr. 442, Düsseldorf: VDI-Verlag

Tappen, M. (2002): Beitrag zur Optimierung der Kohlenstaubfeuerung im Kraftwerk Wilhelmshaven mit Hilfe neuartiger Kohlenstaubmengenmessung, Fortschritt-Berichte VDI: Reihe 6, Nr. 489, Düsseldorf: VDI-Verlag

Beyer, B. (2001): Beitrag zur Auslegung von Kühllüftern für Nutzfahrzeuge, Dissertation, Leibniz Universität Hannover, Universitätsbibliothek u. Technische Informationsbibliothek

Hagelstein, D. (2001): Experimentelle Untersuchungen an einer Radialverdichterstufe mit verschiedenen Vorleitgittern variabler Geometrie, Dissertation, Leibniz Universität Hannover, Universitätsbibliothek u. Technische Informationsbibliothek

Harbecke, U. (2001): Aerodynamische Wirkung fertigungsbedingter technischer Rauheiten und Geometriefehler an gefrästen Turbinenschaufeln, Fortschritt-Berichte VDI: Reihe 7, Nr. 419, Düsseldorf: VDI-Verlag

Heidemann, P. (2001): Diagnoseverfahren zur Schwingungs- und Körperschallüberwachung in Siedewasserreaktoren, Dissertation, Leibniz Universität Hannover

Bahm. F.U. (2000): Das Axialschubverhalten von einstufigen Kreiselpumpen mit Spiralgehäuse, Dissertation, Leibniz Universität Hannover

Gehring, S.  (2000): Verfahren zur Kennfeldberechnung von stark gekühlten Turbinen, Dissertation, Leibniz Universität Hannover, Shaker, Aachen, ISBN: 3-8265-8430-9

Schmidt, D.  (2000): Strömungsuntersuchungen in Dampfturbinen-Endstufen im Heiz- und Schwachlastbetrieb, Fortschritt-Berichte VDI: Reihe 7, Nr. 376, Düsseldorf: VDI-Verlag

Sentker, A. (2000): Analyse der instationären turbulenten Strömung in einem Niedergeschwindigkeitsaxialverdichter, Dissertation, Leibniz Universität Hannover, Shaker, Aachen
ISBN: 3-8265-7476-1

Walkenhorst, J. (2000): Axialverdichter mit wandkonturierten Leitschaufeln – Prüfstandentwicklung und Strömungsuntersuchung, Fortschritt-Berichte VDI: Reihe 7, Nr. 390, Düsseldorf: VDI-Verlag

Shi, L.  (1999): Untersuchung instationärer Strömungsvorgänge in hochbelasteten Radialverdichtern, Dissertation, Leibniz Universität Hannover

Caspar, V.  (1998): Zur numerischen Simulation des turbulenten Impuls- und Massenaustausches in zwangsventilierten Räumen, Dissertation, Leibniz Universität Hannover, Shaker, Aachen
ISBN: 978-3826537394

Pfitzinger, E.W.  (1998): Kennfeldberechnung für Axialverdichter mit systematischer Untersuchung der Verlust- und Umlenkeigenschaften von Schaufelgittern, Fortschritt-Berichte VDI: Reihe 7, Nr. 337, Düsseldorf: VDI-Verlag

Walbaum, M. (1998): Entstehungsmechanismen und Erscheinungsformen des Rotating Stall in einem sechsstufigen Axialverdichter mit verstellbaren Leitschaufeln, Fortschritt-Berichte VDI: Reihe 7, Nr. 352, Düsseldorf: VDI-Verlag

Engelkind, S.  (1997): Untersuchung der Druckwellenmaschine für Kaltluftanlagen, Dissertation, Leibniz Universität Hannover

Hasemann, H.  (1997): Untersuchung der Festigkeit und des Schwingverhaltens hochbelasteter Radialverdichterlaufräder, Dissertation, Leibniz Universität Hannover

Jetter, Ch.  (1997): Strömungstechnische Qualitätskriterien von spanabhebend gefertigten Turbinenschaufelprofilen, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 314, Düsseldorf: VDI-Verlag
ISBN: 318331407X

Jiang, Z. (1997): Energieumsetzung und Schaufelschwingungen bei verschiedenen Geometrien des Nachleitgitters im Radialverdichter, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 318, Düsseldorf: VDI-Verlag
ISBN: 3-18-331807-5

Kassens, I. (1997): Energieumwandlung im Vorleitgitter eines Radialverdichters, Dissertation, Leibniz Universität Hannover

Baar, R.  (1996): Untersuchungen zu Beschleunigungsvorgängen von Partikeln in Düsen und Strahlen, Dissertation, Leibniz Universität Hannover

Burhorn, D. (1996): Beitrag zur Konzeption eines Abwärme-Compound-Systems an Verbrennungskraftmaschinen in Kraftfahrzeugen, Dissertation, Leibniz Universität Hannover

Heinrich, M.  (1996): Zur Simulation der kompressiblen transsonischen Strömung in einem aerodynamischen hochbelasteten Radialverdichter, Dissertation, Leibniz Universität Hannover

Meyer, B. (1996): Entwicklung eines Simulators für Zweikreisstrahltriebwerke für Modelluntersuchungen des Standprobelaufs, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 12 Nr. 277, Düsseldorf: VDI-Verlag
ISBN: 3-18-327712-3

Bayomi, N.N.M. (1995): An Investigation on the Casing Treatment of the Radial Compressors, Cairo, 9. January 1995

Bigalk, J.  (1995): Sekundärströmung in der Seitenwandgrenzschicht mehrstufiger Axialverdichter, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 295, Düsseldorf: VDI-Verlag
ISBN: 3-18-329507-5

Huth, T. (1995): Das instationäre Strömungsverhalten des Totwassergebietes eines oszillierenden Kreiszylinders, Dissertation, Leibniz Universität Hannover, Shaker, Aachen
ISBN: 3-8265-0575-1

Petrovic, M. (1995): Berechnung der Meridianströmung in mehrstufigen Axialturbinen bei Nenn- und Teillastbetrieb, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 280, Düsseldorf: VDI-Verlag
ISBN: 3-18-328007-8

Seidel, U.  (1995): Radialverdichter-Kennfeldregelung mittels Nachleitrad, Dissertation, Leibniz Universität Hannover

Mattiske, B. (1994): Experimentelle Untersuchung einer mehrstufigen Axialverdichterbeschaufelung mit Randzonenkorrektur, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 252, Düsseldorf: VDI-Verlag
ISBN: 3-18-325207-4

Waltke, U. (1994): Berechnung des Meridianströmungsfeldes in Axialverdichtern mit der Methode der Finiten Elemente, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 261, Düsseldorf: VDI-Verlag, ISBN: 3-18-326107-3

Rüffer, B.  (1990): Zur Simulation des Zeitverhaltens einfacher Dampfkraftanlagen, Dissertation, Leibniz Universität Hannover

Malobabic, M. (1989): Das Betriebsverhalten leitschaufel- und bypassgeregelter PKW-Abgasturbolader, Dissertation, Leibniz Universität Hannover

De Buhr, L.; Fleige, H.-U.; Seume, J.R. (2020): Model tests on the control behaviour of a test air supply system in open or closed-loop operation., Int. Conf. on Screw Machines 2018, Dortmund, 18.+19. Sept. 2018