2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1990 1989 1988 1987 1986 1985 all years
Books, Monographs
Maroldt, N.; Kauth, F.; Seume, J.R. (2020): Experimental Validation of an Optimized Design Process for Transonic Mixed-Flow Compressors, Contributions to the Final Symposium of the Collaborative Research Center 880, December 17-18, 2019, Braunschweig, Germany
Nachtigal, P.; Mai, H.; Rätz H.; Willers, O.; Seume, J.R. (2020): Auslegung und Regelung eines Pulsationsgenerators für Turbolader-Heißgasprüfstände, Spannungsfeld Fahrzeugantriebe – Gedenkschrift für Prof. Dr.-Ing. Roland Baar, Universitätsverlag der TU Berlin, S. 628
Lechner, C.; Seume, J.R. (Hrsg.) (2019): Stationäre Gasturbinen, 3. neu bearbeitete Auflage, Springer-Verlag
Seume, J.R.; Gier, J. (2018): R8 Gasturbinen, In: Dubbel Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 25. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
Seume, J.; Mailach, R. (2014): R1 Grundlagen der Strömungsmaschinen, In: Dubbel Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 24. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
Seume, J.R. (2014): Entscheidungsspielräume im Alltag des Maschinenbau-Ingenieurs, In: Verantwortung von Ingenieurinnen und Ingenieuren. (Hieber, L.; Kammeyer, H-U. (Hrsg.)), S.113-120, Springer-Verlag Berlin Heidelberg
Lechner, C.; Seume, J.R. (Hrsg.) (2010): Stationäre Gasturbinen, 2. neu bearbeitete Auflage, Springer-Verlag
Goldhahn, E.; Alhaj, O.; Herbst, F.; Seume, J. (2009): Quantitative Measurements of Three-Dimensional Density Fields Using the Background Oriented Schlieren Technique., In: Imaging Measurement Methods for Flow Analysis. (Nitsche, W.; Dobriloff, C.), pp.135-144. Springer-Verlag
Lechner, C.; Seume, J.R. (Hrsg.) (2003): Stationäre Gasturbinen, Springer-Verlag Berlin Heidelberg
Hellmich, B. (2000): Der Zweck der Zirkularität. Der 2.Hauptsatz der Thermodynamik im Reich der Naturnotwendigkeit, Mit und gegen Hegel. Von der Gegenstandslosigkeit der absoluten Reflexion zur Begriffslosigkeit der Gegenwart, Lüneburg 2000, zu Klampen-Verlag, ISBN: 3-924245-91-6
Patent application
Volkswagen (2017): Abgasturbine, Abgasturbolader, Brennkraftmaschine und Kraftfahrzeug, Erfinder: Jörg R. SEUME, Melf PETERS, Thorsten KLEINE SEXTRO, Jasper KAMMEYER, Axel GROENENDIJK und Oliver HOLTHOFF. 01.06.2017. Anmeldung: 25.11.2015. DE, Patentschrift DE102015223257
Active Patents
IFTA Ingenieurbüro für Thermoakustik (2016): Verfahren zur Untersuchung des frequenzabhängigen Schwingungsverhaltens eines Brenners, Erfinder: Jörg R. Seume, Jakob Hermann., 21.01.2016. Anmeldung: 19.03.2004. DE, Patentschrift DE102004013584
Volkswagen (2011): Abgasturbolader mit einer Radialturbine, Erfinder: Jörg R. SEUME, Peter Wolfgang MANZ, Yavuz GÜNDOGDU, Jasper KAMMEYER. 13.01.2011. Anmeldung: 06.07.2009. DE, Patentschrift DE102009031787
Expired Patents
Gottfried Wilhelm Leibniz Universität Hannover (2012): Fluid-flow machine for use in e.g. electric car, has compressor and turbine arranged on shaft that is connected with electrical generator for generating electrical energy, where generator is arranged on shaft between compressor and turbine, Erfinder. Jörg R. SEUME, Jasper KAMMEYER, Christoph NATKANIEC., 05.04.2012. Anmeldung: 04.10.2010. DE, Patentschrift DE102010047421
Goodrich Hella Aerospace LS (2006): Air Outlet Device for a Vehicle, Erfinder: Jörg R. SEUME, Tom STEGLICH, Stefan THOMASSIN., 01.06.2006. Anmeldung: 26.11.2004. EP und US, Patentschrift EP1661806 und US2006116063
Siemens (2001): Gas Turbine Blade, Erfinder: Jörg R. SEUME., 25.01.2001. Anmeldung: 19.07.1999. WO, Patentschrift WO2001006096
Siemens (2000): Acoustic energy reduction method for gas turbine plant, Erfinder: Jörg R. SEUME, Mark OLESEN., 20.04.2000. Anmeldung: 16.10.1998. DE, Patentschrift DE19849300
Siemens (1998): Method and Device for Acoustic Modulation of a Flame Produced by a Hybrid Burner, Erfinder: Jörg R. SEUME, Nicolas VORTMEYER, Stephan GLEIS, Jakob HERMANN, Dieter VORTMEYER. , 12.03.1998. Anmeldung 19.08.1997. WO, Patentschrift WO9810226
Siemens (1998): Burner Configuration and Method for Active Damping of Combustion Oscillations, Erfinder: Jörg R. SEUME, Nicolas VORTMEYER, Jakob HERMANN, Dieter VORTMEYER, Carl-Christian Hantschk, Peter ZANGL, Stephan GLEIS., 06.08.1998. Anmeldung: 03.02.1998. WO, Patentschrift WO9834067
International Scientific Journal Paper, peer-reviewed
Cengiz, K.; Özyörük, Y. (2020): Experiences with two detached eddy simulation approaches through use of a high‐order finite volume solver, International Journal for Numerical Methods in Fluids
Eggers, T.; Kim, H.R.; Bittner, S.; Friedrichs, J.; Seume, J.R. (2020): Aerodynamic and Aeroelastic Effects of Design-Based Geometry Variations on a Low-Pressure Compressor, International Journal of Turbomachinery Propulsion and Power 2020, 5(4), 26
Gilge, P.; Mulleners, K.; Seume, J.R. (2020): Experimental Analysis of Multiscale Vortex Shedding in Turbulent Turbomachine Blade Wakes, AIAA Journal
Lehnhoff, S.; Gómez G.A.; Seume, J.R. (2020): Full-scale deformation measurements of a wind turbine rotor in comparison with aeroelastic simulations, Wind Energy Science 5, S. 1411-1423
Meinzer, C. E.; Seume, J. R. (2020): Experimental and Numerical Quantification of the Aerodynamic Damping of a Turbine Blisk, ASME. J. Turbomach
Schwarzbach, F.; Mimic, D.; Herbst, F. (2020): Profile Aerodynamics of an Oscillating Low-Pressure–Turbine Blade, International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), October 2020, Volume 11, Number 4
Seehausen, H.; Gilge, P.; Kellersmann, A.; Friedrichs, J.; Herbst, F. (2020): Numerical Study of Stage Roughness Variations in a HPC , International Journal of Gas Turbine, Propulsion and Power, June 2020, Volume 11, Number 3
Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R (2020): Greater efficiency thanks to smaller gaps – investigations on pressure distribution in the impeller backplane cavity of a high speed centrifugal compressor., Pumps and Compressors for the World Market 2020, VDMA-Verlag, pp. 66-72
Gilge, P.; Kellersmann, A.; Friedrichs, J.; Seume J.R. (2019): Surface roughness of real operationally used compressor blade and blisk, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Gößling, J.; Ahlefeldt, T.; Hilfer M. (2019): Experimental validation of unsteady pressure-sensitive paint for acoustic applications, Experimental Thermal and Fluid Science: Volume 112
Miro, S.; Willeke, T.; Broggi, M.; Seume, J. R.; Beer, M. (2019): Reliability Analysis of an Axial Compressor Based on One-Dimensional Flow Modeling and Survival Signature, ASME. ASME J. Risk Uncertainty Part B. 2019;():
Willers, O.; Valstar, F.; kleine Sextro, T.; Flinte, J.; Fischer, T.; Eilts, P.; Seume, J.R. (2019): Erhöhung des Low-End-Torque eines Ottomotors durch Querschnittsvariation des Turboladerverdichters, Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature 2020 J. Liebl (Hrsg.): Experten-Forum Powertrain: Ladungswechsel und Emissionierung 2019, Proceedings, S. 57–70, 2020.
Yirtici, O.; Cengiz, K.; Özgen, S.; Tuncer, I.H. (2019): Aerodynamic Validation Studies on the Performance Analysis of Iced Wind Turbine Blades, Computers & Fluids
Bode, C.; Friedrichs, J.; Frieling, D.; Herbst, F. (2018): Improved Turbulence Prediction in Turbomachinery Flows and The Effect on Three-Dimensional Boundary Layer Transition, Int. J. Turbomach. Propuls. Power 2018, 3(3), 18
Burgmann, S.; Fischer, T.; Rudersdorf, M.; Roos, A.; Heinzel, A.; Seume, J.R. (2018): Development of a Centrifugal Fan with Increased Part-Load Efficiency for Fuel Cell Applications, Renewable Energy, Volume 116, Part A, February 2018, Pages 815-826
Goldmann, A.; Sauter, W.; Oettinger, M.; Kluge, T.; Schröder, U.; Seume, J.R.; Friedrichs, J.; Dinkelacker, F. (2018): A Study on Electrofuels in Aviation, Energies 2018, Vol. 11(2), 392
Liu, X.; Willeke, T.; Herbst, F.; Yang, J.; Seume, J.R. (2018): A Theory on the Onset of Acoustic Resonance in a Multistage Compressor, J. Turbomach 140(8), 081003 (Jul 24, 2018) (12 pages)
Mimic, D.; Drechsel, B.; Herbst, F. (2018): Correlation Between Pressure Recovery of Highly Loaded Annular Diffusers and Integral Stage Design Parameters, J. Turbomach 140(7), 071002 (May 17, 2018) (11 pages)
Mimic, D.; Jätz, C.; Herbst, F. (2018): Correlation between total pressure losses of highly loaded annular diffusers and integral stage design parameters, Journal of the Global Power and Propulsion Society. 2: 388-401
Mueller, J.-K.; Bensmann, A.; Bensmann, B.; Fischer, T.; Kadyk, T.; Narjes, G.; Kauth, F.; Ponick, B.; Seume, J.; Krewer, U.; Hanke-Rauschenbach, R.; Mertens, A. (2018): Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift Systems, Energies 11(1), 179
Yalçın, Ö.; Cengiz, K.; Özyörük, Y. (2018): High-order detached eddy simulation of unsteady flow around NREL S826 airfoil, Journal of Wind Engineering and Industrial Aerodynamics
Gilge, P.; Hohenstein, S.; Seume, J.R. (2017): Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine Blade, International Journal of Gas Turbine, Propulsion and Power Systems, October 2017, Volume 9, Number 3, pp.12-21
Hauptmann, T.; Aschenbruck, J.; Seume, J.R. (2017): Forced Response Excitation due to Stagger Angle Variation in a Multi-Stage Axial Turbine, International Journal of Gas Turbine, Propulsion and Power Systems, October 2017, Volume 9, Number 3
Koepplin, V.; Herbst, F.; Seume, J.R. (2017): Correlation-Based Riblet Model for Turbomachinery Applications, J. Turbomach 139(7), 071006, Feb 28, 2017,10 pages
Müller-Schindewolffs, C.; Baier, R.-D.; Seume, J.R.; Herbst F. (2017): Direct Numerical Simulation Based Analysis of RANS Predictions of a Low-Pressure Turbine Cascade, J. Turbomach 139(8), 081006, Mar 21, 2017,11 pages
Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R. (2017): Correcting Turbocharger Performance Measurements for Heat Transfer and Friction, J. Eng. Gas Turbines Power 140(2), 022301 (Oct 03, 2017) (9 pages)
Seume, J.R.; Peters, M.; Kunte, H. (2017): Design and test of a 10kW ORC supersonic turbine generator, Journal of Physics: Conference Series, Volume 821, Number 1, 12023
Teichel, S.; Verstraete, T.; Seume, J.R. (2017): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift Systems, International Journal of Gas Turbine, Propulsion and Power Systems, June 2017, Volume 9, Number 2, pp. 19-26
Drechsel, B.; Seume, J.R.; Herbst, F. (2016): On the Numerical Prediction of the Influence of Tip Flow on Diffuser Stability, International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), December 2016, Volume 8, Number 3
Gilge, P.; Mulleners, K. (2016): Resulting Aerodynamic Losses of Combinations of Localized Roughness Patches on Turbine Blades, AIAA Journal, Vol. 54, No. 8 (2016), pp. 2552-2555
Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis, J. Eng. Gas Turbines Power 139(3), 031504 (Sep 27, 2016) (8 pages)
Hartmann, U.; Seume, J.R. (2016): Combining ART and FBP for Improved Fidelity of Tomographic BOS, Journal of Measurement Science and Technology, Vol. 27, No. 9, 097001 (10 pages)
Schinnerl, M.; Seume, J.R.; Ehrhard, J.; Bogner, M. (2016): Heat Transfer Correction Methods for Turbocharger Performance Measurements, J. Eng. Gas Turbines Power 139(2), 022602 (Sep 13, 2016) (9 pages)
Wiegmann, B.; Seggern, H. von; Höffler, K.; Korossis, S.; Dipresa, D.; Pflaum, M.; Schmeckebier, S.; Seume, J.R.; Haverich, A. (2016): Developing a biohybrid lung – sufficient endothelialisation of poly-4-methly-1-pentene gas exchange hollo-fiber membranes, Journal of the Mechanical Behaviour of Biomedical Materials, Vol. 60, July 2016, pages 301-311
Aschenbruck, J.; Seume, J.R. (2015): Experimentally Verified Study of Regeneration-induced Forced Response in Axial Turbines, J. Turbomach 137(3), 031006 (Sep 30, 2014) (10 pages)
Grönmann, A.; Biester, M.; Turunen-Saaresti, T.; Jaatinen-Värri, A.; Backmann, J.; Seume, J.R. (2015): Importance of the Vane Exit Mach Number on the Axial-Clearance-Related Losses, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol 230, Issue 2, pp. 175 - 183
Adamczuk, R.R.; Luehrmann, J.; Seume, J.R. (2014): Methodology for Evaluating Hot Gas Path Defects in an Exhaust Jet, Journal of Aerospace Science and Technology. December 2014, Vol. 39, pp. 120-127
Binner, M.; Seume, J.R. (2014): Flow Patterns in High Pressure Steam Turbines During Low-Load Operation, J. Turbomach 136(6), 061010 (Nov 21, 2013) (12 pages)
Freund, O.; Montgomery, M.; Mittelbach, M.; Seume, J.R. (2014): Non-Contact Test Set-Up for Aeroelasticity in a Rotating Turbomachine Combining a Novel Acoustic Excitation System with Tip-Timing, Journal of Measurement Science and Technology Vol. 25, No. 3, 035008
Herbst, F.; Fiala, A.; Seume, J.R. (2014): Modeling Vortex Generating Jet-Induced Transition in Low-Pressure Turbines, J. Turbomach 136(7), 071005 (Jan 02, 2014) (16 pages)
Mulleners, K.; Gilge, P.; Hohenstein, S. (2014): Impact of Surface Roughness on the Turbulent Wake Flow of a Turbine Blade, Journal of Aerodynamics, Vol. 2014, Article ID 458757, 9 pages
Teichel, S.H.; Dörbaum, M.; Misir, O.;Merkert, A.; Mertens, A.; Seume, J.R.; Ponick, B. (2014): Design Considerations for the Components of Electrically Powered Active High-Lift Systems in Civil Aircraft, CEAS Aeronautical Journal: Volume 6, Issue 1 (2015), pp. 49-67
Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.M.; Seume, J.R. (2013): Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies, J. Turbomach 135(3), 031033 (Mar 25, 2013) (9 pages)
Herbst, F.; Kozulovic, D.; Seume, J.R. (2013): Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine Profiles, J. Turbomach 135(1), 011038 (Oct 31, 2012) (8 pages)
Lietmeyer, C.; Denkena, B.; Krawczyk, T.; Kling, R.; Overmeyer, L.; Wojakowski, B.; Reithmeier, E.; Scheuer, R.; Vynnyk, T.; Seume, J.R. (2013): Recent Advances in Manufacturing of Riblets on Compressor Blades and their Aerodynamic Impact, J. Turbomach 135(4), 041008 (Jun 03, 2013) (12 pages)
Lietmeyer, C.; Oehlert, K.; Seume, J.R. (2013): Optimal Application of Riblets on Compressor Blades and their Contamination Behaviour, J. Turbomach 135(1), 011036 (Oct 31, 2012) (10 pages)
Seume, J.R.; Pourshaghaghy, A. (2013): Estimation of Surface Heat Flux in the Wind Tunnel Cascade Blades, Scientific Journal for Fundamentals and Applications of Engineering Mechanicals, 2013, Vol. 33, Issue 1, pp. 52-66
Adamczuk, R.; Seume, J.R. (2012): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions, International Journal of Gas Turbine, Propulsion and Power Systems, June 2012, Volume 4, Number 2
Ernst, B.; Seume, J.R. (2012): Investigation of Site-Specific Wind Field Parameters and Their Effect on Loads of Offshore Wind Turbines, Energies. 2012; 5(10):3835-3855, ISSN: 1996-1073
Fischer, K.; Seume, J.R. (2012): Thermo-Mechanical Stress in Tubular Solid Oxid Fuel Cells: Part I-Transient Operating Behavior and the Relevance of Material Creep, IET Renewable Power Generation(2012),6(3):177
Fischer, K.; Seume, J.R. (2012): Thermo-Mechanical Stress in Tubular Solid Oxide Fuel Cells: Part II-Operating Strategy for Reduced Probability of Fracture Failure, IET Renewable Power Generation, June 2012, Vol. 6, issue 3, pp. 194-205, ISSN: 1752-1424
Mohseni, A.; Goldhahn, E.; Van den Braembussche, R. A.; Seume, J.R. (2012): Novel IGV Designs for Centrifugal Compressors and their Interaction with the Impeller, J. Turbomach 134(2), 021006 (Jun 22, 2011) (8 pages)
Shaaban, S.; Seume, J.R. (2012): Impact of Turbocharger Non-Adiabatic Operation on Engine Volumetric Efficiency and Turbo Lag, International Journal of Rotating Machinery, vol. 2012, Article ID 625453, 11 pages
Vorreiter, A.; Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R. (2012): Numerical Investigations of the Efficiency of Circulation Control in a Compressor Stator, J. Turbomach 134(2), 021012 (Jun 27, 2011) (11 pages)
Haslbeck, K.; Schwarz, K.; Hohlfeld, J.M.; Seume, J.R.; Koch, W. (2010): Submicron Droplet Formation in the Human Lung, Journal of Aerosol Science, Vol. 41, Issue 5, pp. 429-438
Fischer, K.; Seume, J.R. (2009): Location and Magnitude of Heat Sources in Solid Oxide Fuel Cells, J. Fuel Cell Sci. Technol 6(1), 011002 (Nov 03, 2008) (11 pages)
Fischer, K.; Seume, J.R. (2009): Impact of the Temperature Profile on Thermal Stress in a Tubular Solid Oxide Fuel Cell, J. Fuel Cell Sci. Technol 6(1), 011017 (Nov 12, 2008) (9 pages)
Gomez, A.; Seume, J.R. (2009): Load Pulses on Wind Turbine Structures Caused by Tower Interference., Wind Engineering, Vol. 33, Issue 6, pp. 555-570
Nouri-Borujerdi, A.; Ziaei-Rad, M.; Seume, J.R. (2009): Numerical Simulation of Developing Compressible Turbulent Flow with Heat Transfer, Journal of Thermophysics and Heat Transfer, Vol. 23, No. 4 (2009), pp. 801-809.
Hellmich, B.; Seume, J.R. (2008): Causes of Acoustic Resonance in a High-Speed Axial Compressor, J. Turbomach 130(3), 031003 (May 02, 2008) (9 pages)
Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R. (2008): Improved Diffuser / Volute Combinations for Centrifugal Compressors, J. Turbomach 130(1), 011014 (Jan 25, 2008) (9 pages)
Goldhahn, E.; Seume, J.R. (2007): The Background Oriented Schlieren Technique: Sensitivity, Accuracy, Resolution and Application to a Three-Dimensional Density Field, Experiments in Fluids, Vol. 43, Issue 2-3, pp. 241-249
Riess, W.; Shieh, T.-H. (2005): Untersuchung einer Axialturbinen-Stufe mit tangential gekrümmten Leitschaufeln, Teil I: Strömungsstruktur im Leitradkanal, Forschung im Ingenieurwesen, Band 69, Heft 3, June 2005, S. 151-162
Riess, W.; Shieh, T.-H. (2005): Untersuchung einer Axialturbinen-Stufe mit tangential gekrümmten Leitschaufeln, Teil II: Modellierung für Throughflow-Rechenverfahren, Forschung im Ingenieurwesen, Band 69, Heft 3, June 2005, S. 163-169
Fischer, A; Rieß, W; Seume, J.R. (2004): Performance of Strongly Bowed Stators in a Four-Stage High Speed Compressor, J. Turbomach 126(3), 333-338 (Sep 03, 2004) (6 pages)
Levy, Y.; Pismenny J.; Reissner, A; Riess, W (2002): Relationship between Frequencies of Pressure Oscillations and Rotating Stall in Axial Compressors, International Journal of Turbo and Jet- Engines, Vol. 19, Issue 4, pp. 233-247
Hasemann, H.; Hagelstein, D.; Rautenberg, M. (2000): Coupled Vibration of Unshrouded Centrifugal Compressor Impellers, Part 2: Computation of Vibration Behavior, International Journal of Rotating Machinery, vol. 6, no. 2, pp. 115-128, 2000
Hasemann, H.; Hagelstein, D.; Rautenberg, M. (2000): Coupled Vibration of Unshrouded Centrifugal Compressor Impellers, Part 1: Experimental Investigation, International Journal of Rotating Machinery, vol. 6, no. 2, pp. 101-113, 2000.
Sentker, A.; Riess, W. (2000): Experimental Investigation of Turbulent Wake-Blade Interaction in Axial Compressors, International Journal of Heat and Fluid Flow, Vol. 21, pp. 285-290
Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A. (1998): Application of Active Combustion Instability Control to a Heavy Duty Gas Turbine, Journal of Engineering for Gas Turbines and Power, Vol. 120, Issue 4, pp. 721-726
Engeda, A.; Rautenberg, M. (1987): Comparisons of the Relative Effect of Tip Clearance on Centrifugal Impellers, Journal of Turbomachinery, October 1987, Vol. 109, Issue 4, 545-549 (5 pages)
International Scientific Journal Paper, not peer-reviewed
Flinte, J.; Eilts, P.; Willers, O.; Seume, J.R. (2020): Extension of the Characteristic Map of a TC Compressor by active Cross-Section Variation, MTZ worldwide, S. 68-72
Henke, M.; Rätz, H.; Fleige, H.-U.; Seume, J.R. (2019): Preparation of Acceptance Tests for a New Turbomachinery Test Facility , 9th EVI-GTI International Gas Turbine Instrumentation Conference, 20th and 21th Nov 2019 , Graz, Austria
Menze, M.; Schödel, M.; Willers, O.; Seume, J. R.; (2019): Brennstoffzellensysteme im Straßenverkehr als Antriebskonzept für die Mobilität der Zukunft, Journal für Mobilität und Verkehr, Ausgabe 3
Willers, O.W.; Kunte, H.; Seume, J.R. (2017): ORC turbine-generator unit for truck applications, Automobiltechnische Zeitschrift (ATZ) Worldwide, Vol. 119, October 2017, pages 58-61, Springer, Wiesbaden
Hohenstein, S.; Aschenbruck, J.; Seume, J.R (2013): Einfluss betriebs- und regenerationsbedingter Varianzen von Turbinenschaufeln, International Journal for Electricity and Heat Generation VGB PowerTech (11), S. 51-58, 2013
Kuschel, M.; Seume, J.R. (2010): Influence of the wakes of Rotating Spokes on the Performance of a Turbine Exhaust Diffuser, Journal of Thermal Science, Vol. 19, Issue 3, pp. 206-210
Lietmeyer, C.; Gündogdu, Y.; Kleppa, O.; Oehlert, K.; Vorreiter, A.; Seume, J. (2009): Zukunftsperspektiven für die Hochtemperaturgasturbine, VGB PowerTech, Band 89, Heft 10/2009, S. 48-55 auch veröffentlicht auf der VGB Fachtagung Gasturbinen und Gasturbinenbetrieb, 24-25 Juni 2009, Mannheim
Sieker, O.; Seume, J.R. (2008): Influence of Rotating Wakes on Separation in Turbine Exhaust Diffusers, Journal of Thermal Science, Vol. 17, Issue 1, pp. 42-49
Pietrasch, R.Z.; Seume, J.R. (2005): Interaction between Struts and Swirl Flow in Gas Turbine Exhaust Diffusers, J. of Thermal Science Vol. 14, No.4, pp. 314-320
Petrovic, M.; Gehring, S; Rieß, W. (2001): 2D-Verfahren zur Auslegung, Optimierung und Kennfeldberechnung von Gas- und Dampfturbinen, VGB PowerTech, Band 81, Heft 1 1/2001, S. 52-57
International Conference Paper, peer-reviewed
Alldieck, R.; Seehausen, H.; Herbst, F.; Seume, J. R. (2020): The Effect of Rough-Wall Boundary Condition on RANS-Based Transition Prediction, Proceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0053
Goeing, J.; Seehausen, H.; Herbst, F.; Bode, C.; Friedrichs J.; Seume, J. R. (2020): Performance simulation of roughness induced module variations of a jet propulsion by using pseudo bond graph theory, Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, GT2020-14456
Goeing, J.; Seehausen, H.; Pak, V.; Lueck, S.; Friedrichs J.; Seume, J. R. (2020): Influence of combined compressor and turbine deterioration on the overall performance of a jet engine using RANS simulation and pseudo bond graph approach, Proceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0140
Kluge, T.; Lettmann, I.; Oettinger, M.; Wein, L.; Seume, J. R. (2020): Unsteady Flow Phenomena in Turbine Shroud Cavities, Proceedings of the Global Power and Propulsion Society, Global Power and Propulsion Society, GPPS-CH-2020-0064
Lehnhoff, S.; Kidambi S.A.P.; van Dooren, M.F.; Kühn, M.; Seume, J.R. (2020): Full scale rotor blade deformation measurements in comparison with aeroelastic simulations based on measured high-resolution wind fields, The Science of Making Torque from Wind (TORQUE 2020), Journal of Physics: Conference Series, Vol. 1618, Delft, Netherlands
Lohse, S.; Fischer, F.; Koch, R.; Moreau, S.; Seume, J.R. (2020): Aeroacoustic Numerical Investigations of a scaled Compressor Cascade, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0094
Nachtigal, P.; Rätz, H.; Mai, H.; Seume, J.R. (2020): Design and validation of a pulse generator for the pulse shaping of the turbine inlet pressure at the hot-gas test bench, 14th International Conference on Turbochargers and Turbocharging, Institution of Mechanical Engineers, CRC Press, S. 48-61
Oettinger, M.; Henke, M.; Seume, J. R. (2020): Effect of Diffusor Inhomogeneity on Full-Annulus Axial Turbine Performance, Proceedings of the Global Power and Propulsion Society (GPPS) Chania Conference, 7-9 September, 2020, Chania, Greece. Global Power and Propulsion Society. Paper GPPS-CH-2020-0139
Schmid, M; Seume, J.R. (2020): Design of an aerofoil for small wind turbines with a focus on turbulent inflow conditions, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0066
Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R. (2020): Mehr Effizienz durch kleinere Spalte – Untersuchungen zur Druckverteilung im Radrückraum eines schnelllaufenden Radialverdichters., Pumpen und Kompressoren für den Weltmarkt 2020, VDMA-Verlag, pp. 66-72
Wang, P.; Vera-Morales, M.; La, P.; Zangeneh, M.; Maroldt, N.; Willers, O.; Kauth, F.; Seume, J.R. (2020): Design of a Mixed-Flow Transonic Compressor for Active High-Lift System Using a 3D Inverse Design Methodology, Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, September 21-25, 2020, Virtual, Online, GT2020-15645
Wein, L.; Kluge, T.; Hain, R.; Fuchs, T.; Kähler, C.; Schmierer, R.; Herbst, F.; Seume, J. R. (2020): Validation of RANS Turbulence Models for Labyrinth Seal Flows by Means of Particle Image Velocimetry, Proceedings of ASME Turbo Expo 2020, 21.-25.September, 2020, London, UK, Paper, GT2020-14885
Zeh, C.; Willers, O.; Hagemann, T.; Schwarze, H.; Seume, JR. (2020): Evaluation of the Rotor Temperature Distribution of an Automotive Turbocharger Under Hot Gas Conditions Including Indirect Experimental Validation, Proceedings of ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, GT2020, June 22-26, 2020, London, England, GT2020-14972
Ziaja, K.; Post, P.; Sembritzky, M.; Schramm, A.; Willers, O.; Kunte, H.; di Mare, F.; Seume, J.R. (2020): Numerical Investigation of a Partially Loaded Supersonic ORC Turbine Stage, Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, GT2020-15645, September 21-15, 2020
Zieße, M.; Wein, L.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R. (2020): Validation of a Synthetic-Eddy Method for Modelling Incoming Wakes in Scale-Resolving Simulations of Turbomachinery Cascades, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th– 9th September, 2020, GPPS-CH-2020-0017
Kauth, F.; Maroldt, N.; Seume, J. R.; (2019): Experimental validation of a compact mixed-flow compressor for an active high-lift system , IOP Conference Series: Materials Science and Engineering: Volume 643, Number 1
Kluge, T.; Wein, L.; Schmierer, R.; Seume, J.R. (2019): Sensitivity Analysis, Design, Instrumentation, and Experimental Validation of a Novel Labyrinth Seal Rig., Proceedings of the ETC 13, European Turbomachinery Society
Mimic, D.; Herbst, F. (2019): Influence of Transonic Flow on the Tip-Leakage Vortex in a Turbine Cascade, Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-082
Mimic, D.; Oettinger, M.; Jätz, C.; Herbst, F.; Seume, J. R. (2019): Thermal End-Wall Contouring, Proceedings of ASME Turbo Expo 2019, 17–21 June 2019, Phoenix, USA, GT2019-90191
Mimic, D.; Oettinger, M.; Sauer, P.; Herbst, F. (2019): Shock–Vortex Interaction in a Transonic Turbine Cascade, Proceedings of Global Power and Propulsion Society (GPPS) Beijing Conference 2019, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0008
Oettinger, M.; Henke, M.; Herbst, F.; Seume, J. R. (2019): Axial-Gap Size Effect on the Unsteady Flow Field at Midspan in a 1.5-Stage Low-Pressure Turbine, Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-084
Oettinger, M.; Mimic, D.; Henke, M.; Schmunk, O.; Seume, J. R. (2019): Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure Turbine, Proceedings of Global Power and Propulsion Society (GPPS) Beijing Conference, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0207
Schwarzbach, F.; Mimic, D.; Herbst, F. (2019): Profile Aerodynamics of an Oscillating Low-Pressure–Turbine Blade, Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-048
Seehausen, H.; Gilge, P.; Kellersmann, A.; Friedrichs, J.; Herbst, F. (2019): Numerical Study of Stage Roughness Variations in a High Pressure Compressor, Proceedings of the International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan, IGTC-2019-062
Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J. (2019): Analytical, Experimental and Numerical Investigations on the Impeller Backplane Pressure Distribution of a High-Speed Centrifugal Compressor, 4th International Rotating Equipment Conference (IREC), Wiesbaden
Zieße, M.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R. (2019): Enhanced Synthetic-Eddy-Method for Generating Moving Incoming Wakes and Turbulence in Scale-Resolving Simulations, Proceedings of the International Gas Turbine Congress 2019, 17–22 November 2019, Tokyo, Japan, 66
Fischer, T.; kleine Sextro, T.; Seume, J.R.; Flinte, J.; Eilts, P. (2018): Flow range of variable cross-section compressors, Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK
Fischer, T.; Willers, O.W.; Seume, J.R. (2018): Preliminary Design of a Partial Admission Turbine for the Waste Heat Recovery in Fuel Cells, Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK
Frieling, D.; Griebel, A.; Wein, L.; Seume, J.R.; Herbst, F. (2018): The Influence of Rotor-Wakes on Boundary Layer Development in an Axial Compressor and its Numerical Prediction, Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75631
Hartmann, U.; Seume, J.R. (2018): Automated Condition Evaluation of Hot-Gas Path Components of Jet Engines through Exhaust Jet Analysis, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75384
Hartung, K.; Gilge, P.; Herbst, F. (2018): Towards Immersed Boundary Methods for Complex Roughness Structures in Scale-Resolving Simulations , 32nd European Conference on Modelling and Simulation (ECMS 2018), 22-25 May 2018, Wilhelmshaven, Germany
Hauptmann, T.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of Forced Response Methods in a Multi-Stage Axial Turbine, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75390
Kauth, F.; Narjes, G.; Müller, J.-K.; Mertens, A.; Ponick, B.; Seume, J.R. (2018): Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future Aircraft, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0026
Maehler, L.; Willeke, T.; Seume, J.R. (2018): Numerical Prediction of the Notch Effect of Riblets on Axial Compressor Blades, Proceedings of the Global Power and Propulsion Forum (GPPF), GPPS, 07-09 May 2018, Montreal, Canada, GPPS-2018-0025
Meinzer, C.E.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J.R. (2018): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine Shafts , Proceedings of the Global Power & Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 10-12 January 2018, Zurich, Switzerland, GPPS-2018-0016
Mimic, D.; Jätz, C.; Herbst, F. (2018): Increasing Boundary Layer Stability for Varying Degrees of Diffuser Loading, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0006
Mimic, D.; Jätz, C.; Sauer, P.; Herbst, F. (2018): Total Pressure Loss Reduction in Annular Diffusers, Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS01
Müller-Schindewolffs, C.; Herbst, F. (2018): The Effect of Turbulent Scales on Low-Pressure Turbine Aerodynamics - Part A: An optimized Turbulent Boundary-Condition, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Lillestrøm, Norway, GT2018-75162
Schwarzbach F.; Müller-Schindewolffs Ch.; Bode, Ch.; Herbst, F. (2018): Effect of the Turbulent Scales on Low-Pressure Turbine Cascade Aerodynamics Part B: Scale Resolving Simulations, Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75163
Wein, L.; Seume, J.R.; Herbst, F. (2018): Unsteady Flow in a Labyrinth Seal, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-NA-2018-0036
Bode, C.; Friedrichs, J.; Frieling, D.; Herbst, F. (2017): Improved Turbulence Prediction in Turbomachinery Flows and The Effect on Three-Dimensional Boundary Layer Transition, International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ISROMAC 2017, 16-21 December, 2017, Maui, Hawaii
Du, J.; Seume, J.R. (2017): Design of Casing Treatment on a Mixed-Flow Compressor, Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-65226
Fischer, T.; Burgmann, S.; Rudersdorf, M.; Seume, J.R. (2017): Partially Vaned Diffuser With Variable Cross-Section for Centrifugal Fans, Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA
Keller, C.; Kellersmann, A.; Friedrichs, J.; Seume, J.R. (2017): Influence of Geometric Imperfections on Aerodynamic and Aeroelastic Behavior of a Compressor Blisk , Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-63556
Mimic, D.; Drechsel, B.; Herbst, F. (2017): Correlation between Pressure Recovery of Highly Loaded Annular Diffusers and Integral Stage Design Parameters, Proceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-63586
Mimic, D.; Jätz, C.; Herbst, F. (2017): Correlation between Total Pressure Losses of Highly Loaded Annular Diffusers and Integral Stage Design Parameters, Proceedings of Shanghai 2017 Global Power and Propulsion Forum, 30 October – 1 November, 2017, Shanghai, China, GPPS-2017-0063
Miro, S.; Broggi, M.; Beer, M.; Willeke, T.; Seume, J.R. (2017): Survival Signature Approach for the Reliability Analysis of an Axial Compressor, 27th European Safety and Reliability Conference ESREL, 18 – 22 June 2017, Portorož, Slovenia
Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R. (2017): Correcting Turbocharger Performance Measurements for Heat Transfer and Friction, Proceedings of the ASME Turbo Expo 2017, 26-30 June 2017, Charlotte, NC, USA, GT2017-64283
Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J.; Berger, R.; Rolfes, R.; Keller, C.; Seume, J.R. (2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and Mistuning, Proceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142, 2017, GPPS-2017-0142
Wein, L.; Seume, J.R.; Herbst, F. (2017): Improved Prediction of Labyrinth Seal Performance through Scale Adaptive Simulation and Stream Aligned Grids, Proceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-64257
Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction, Proceedings of 12th European Conference on Fluid Dynamics & Thermodynamics, April 3-7, Stockholm, Sweden, ETC2017-242
Willeke, T.; Hellberg, M.; Seume, J.R. (2017): A Numerical Concept Study on Internal Blade Cooling in Axial Compressors, Proceedings of the ETC 12, 3-7 April 2017, Stockholm, Sweden, ETC2017-106
Willers, O.W.; Kunte, H; Seume, J.R. (2017): Supersonic Impulse Turbine for Organic Rankine Cycle (ORC) Truck Applications, 26th Aachen Colloquium Automobile and Engine Technology, 9-11 October 2017, Aachen; proceedings pp. 1557-1570, Aachener Kolloquium Fahrzeug- und Motorentechnik GbR, Aachen
Adamczuk, R.R.; Seume, J.R. (2016): Numerical Evaluation of the Condition of a Jet Engine Through Exhaust Jet Analysis, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56947
Ernst, B.; Seume, J.R.; Herbst, F. (2016): Effect of Turbulence and Transition Models on the CFD-based Performance Prediction of Wind Turbines , Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56728
Fischer, T.; Raetz, H.; Peters, M.; Seume, J.R. (2016): Low inertia centrifugal compressor wheels: Influence of back disk cavity on aerodynamic losses and axial thrust load, Proceedings of 12th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, UK
Fischer, T.; Rudersdorf, M.; Burgmann, S.; kleine Sextro, T.; Seume, J.R. (2016): Investigation of a Diffuser-Volute Combination with Variable Cross-Sectional Area for Centrifugal Fans , Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56299
Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56467
Hauptmann, T.; Seume, J.R. (2016): Aerodynamic Excitation for Variable Tip Gap, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Corea, GT2016-57217
Henke, M.; Wein, L.; Kluge, T.; Biester, M.H.-O.; Guendogdu, Y.; Seume, J.R. (2016): Experimental and Numerical Verification of the Core-Flow in a New Low-Pressure Turbine, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57101
Hurfar, C.M.; Keller, C.; Mumcu, A.; Seume, J.R. (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 2: Experimental Verification, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56969
kleine Sextro, T.; Lübbert, N.; Rätz, H.; Seume, J.R. (2016): Heat Flow In a Turbocharger Shaft and its Impact on the Bearing System, Proceedings of the 12th International Conference on Turbochargers and Turbocharging (IMECHE), 17-18 May, London, England, C6231/110
Koepplin, V.; Herbst, F.; Seume, J.R. (2016): Correlation-based Riblet Model for Turbomachinery Applications, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56293
Kunte, H.; Seume, J.R. (2016): Design of a turbine-generator-unit for commercial vehicle ORC applications, Proceedings of 12th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, C6231-155
Müller, C.; Baier, R.-D.; Seume, J.R.; Herbst, F. (2016): DNS-Based Analysis of RANS Predictions of a Low-Pressure Turbine Cascade, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57582
Mumcu, A.; Keller, C.; Hurfar, C. M.; Seume, J.R. (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 1: Design and Methodology, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56020
Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Kauth, F.; Seume, J.R. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift Systems, ESARS-ITEC Conference, 2-4 November 2016, Toulouse, France
Schinnerl, M.; Seume, J.R.; Ehrhard, J.; Bogner, M. (2016): Heat Transfer Correction Methods for Turbocharger Performance Measurements, Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56770
Schwerdt, L.; Hauptmann, T.; Kunin, A.; Wallascheck, J.; Wriggers, P.; Panning-von Scheidt, L.; Löhnert, S.; Seume, J.R. (2016): Aerodynamical and Structural Analysis of Operationally used Turbine Blades, 5th International Conference on Through-life Engineering Servies, 1-2 November 2016, Cranfield, England
Siemann, J.; Krenz, I.; Seume, J.R. (2016): Experimental Investigation of Aspiration in a Multi-Stage High-Speed Axial-Compressor, Proceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-56440
von der Haar, H.; Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Defect Detection in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases, Proceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-57847
Winstroth, J.; Seume, J.R. (2016): On the Influence of Airfoil Deviations on the Aerodynamic Performance of Wind Turbine Rotors, Journal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 022058
Wolff, T.; Seume, J.R. (2016): Modeling the Transient Aerodynamic Effects During the Motion of a Flexible Trailing Edge, Journal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 082038
Aschenbruck, J.; Hauptmann, T.; Seume, J.R. (2015): Influence of Multi-Hole Pressure Probes on the Flow-Field in Axial-Turbines, Proceedings of 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-155
Brand, C.R.; Seume, J.R. (2015): Flaps for Wind Turbine Applications: Results of an Acoustic Study, Proceedings of the EWEA Annual Event, 17-20 November 2015, Paris, France
Denkena, B.; Böß,V.; Nespor, D.; Gilge, P.; Hohenstein, S.; Seume, J.R. (2015): Prediction of the 3D Surface Topography after Ball End Milling and its Influence on Aerodynamics , Conference on Modelling of Machining Operations (15th CMMO), 11-12 Juni, Karlsruhe, Germany
Drechsel, B.; Müller, C.; Herbst, F.; Seume, J.R. (2015): Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part B: Scale-Resolving Simulations, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42477
Drechsel, B.; Seume, J.R.; Herbst, F. (2015): On the Numerical Prediction of the Influence of Tip Flow on Diffuser Stability, Proceedings of the International Gas Turbine Congress 2015, November 15-20, 2015, Tokyo, Japan
Fischer, T.; Peters, M.; Seume, J.R. (2015): Low Inertia Centrifugal Compressor Wheels: Back Disk Geometry Optimization, Proceedings of the International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan
Flores, D.; Seume, J.R. (2015): The Influence of Labyrinth Flows on the Aerodynamic Performance of an Axial Compressor, Proceedings of 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-117
Hartmann, U.; Seume, J.R. (2015): Application of an Algebraic Reconstruction Algorithm to Tomographic BOS Measurements, Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
Hauptmann, T.; Aschenbruck, J.; Seume, J.R. (2015): Forced Response Excitation due to Variances in a Multi-Stage Axial Turbine, Proceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan
Hohenstein, S.; Gilge, P.; Seume, J.R. (2015): Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine Blade, Proceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan, IGTC2015-0078
Hurfar, M.; Bartelt, M.; Seume, J.R. (2015): A Scaling Method for Modal Sound Propagation in Annular Ducts, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-42839
Keller, C.; Willeke, T.; Burrafato, S.; Seume, J.R. (2015): Design Process of a 1.5-Stage Axial Compressor for Experimental Flutter Investigations, Proceedings of the International Gas Turbine Congress, 15-20 November 2015, Tokyo, Japan, IGTC2015-0141
kleine Sextro, T.; Steglich, T.; Seume, J.R. (2015): Variable Inlet Guide Vane Devices for a Turbocharger Compressor, Proceedings of International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan, IGTC2015-0161
Kluge, T.; Henke, M.; Seume, J.R. (2015): Comparison of Different Methods for the Analysis of Time-Resolved Flow Field Measurements in an Axial Turbine, Proceedings of the ETC 11, 23-26 March 2015, Madrid, Spain, ETC2015-189
Kunte, H.; Seume, J.R.; Pautov, D.; Cherkasova, M.; Zabelin, N.; Olennikov, S.; Rassokhin, V. (2015): Supersonic Impulse Turbine for Automotive Waste Heat Recovery: A Comparison of three Designs of Turbine Blade Profiles, 11th European Turbomachinery Conference, 23-27 March 2015, Madrid, Spain, ETC2015-092
Kuschel, M.; Drechsel, B.; Kluß, D.; Seume, J.R. (2015): Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part A: Experimental Results, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42476
Meinzer, C.; Bittner, S.L.; Schmitt, S.; Kielb, R.E.; Seume, J.R. (2015): Design of a Single Stage Turbine for the Quantification of Aerodynamic Damping, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42641
Müller, C.; Herbst, F.; Fiala, A.; Zscherp, C.; Kügeler, E.; Seume, J.R. (2015): Parameter Study for an Improved Prediction of Wake-Induced Transition in Low-Pressure Turbines, Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan, IGTC2015-0043
Siemann, J.; Seume, J.R. (2015): Design of an Aspirated Compressor Stator by Means of DOE, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42474
Teichel, S.; Verstraete, T.; Seume, J.R. (2015): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift Systems, Proceedings of the International Gas Turbine Congress 2015, 15-20 November, Tokyo, Japan
Von Seggern, H.; Seume, J.R.; Vorreiter, A. (2015): Measuring the Dynamic Thinning Process of Free Fluid Films with LED-IF, Proceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows,13-16 July 2015, Lerici, Italy, ISAIF12-093
Vorreiter, A. (2015): Feasibility Study on a Single-Stage Tandem Axial Compressor for an Active High-Lift-System, Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
Vorreiter, A; Seume, J.R. (2015): Effects of Circulation Control on a Multi-Stage Axial Compressor, Proceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows,13-16 July 2015, Lerici, Italy, ISAIF12-094
Winstroth, J.; Seume, J.R. (2015): Error Assessment of Blade Deformation Measurements on a Multi-Megawatt Wind Turbine Based on Digital Image Correlation, Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-43622
Aschenbruck, J.; Adamczuk, R.; Seume, J.R. (2014): Recent Progress in Turbine Blade and Compressor Blisk Regeneration, 3rd International Through-life Engineering Services Conference, EPSRC Centres for Innovative Manufacturing, 4-5 November 2014, Cranfield, England
Aschenbruck, J.; Seume, J.R. (2014): Experimentally Verified Study of Regeneration-Induced Forced Response in Axial Turbines., Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25664
Ernst, B.; Schmitt, H.; Seume, J.R. (2014): Effect of Geometric Uncertainties on the Aerodynamic Characteristic of Offshore Wind Turbine Blades, The Science of Making Torque from Wind 2012, Journal of Physics: Conference Series, Oldenburg, Germany
Flores, D.; Seume, J.R. (2014): Selecting Cavity Geometries for Improving the Aerodynamic Performance of an Axial Compressor, Proceedings of the ASME Turbo Expo 2014, 16-20 June 2014, Düsseldorf, Germany, GT2014-25328
Pohle, L.; Aschenbruck, J.; Panning- von Scheidt, L.; Seume, J.R.; Wallaschek, J. (2014): Dynamic Behaviour of a Mistuned Air Turbine: Comparison between simulations and measurements, Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-26025
Porzig, D.; Raetz, H.; Schwarze, H.; Seume, J.R. (2014): Thermal Analysis of Small high-speed floating-ring Journal bearings, Proceedings of 11th International Conference on Turbochargers and Turbocharging (IMechE), 13-14 May 2014, London, UK
Winstroth, J.; Schön, L.; Ernst, B.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: A Comparison to Aeroelastic Simulations of a Multi-Megawatt Wind Turbine , The Science of Making Torque from Wind 2014, Journal of Physics: Conference Series, 18-20 June 2014, Copenhagen, Denmark
Witthaus, S.; Seume, J.R. (2014): Boundary Condition for the Implementation of Arbitrary Acoustical Modes, inter.noise 2014, 43rd International Congress on Noise Control Engineering, 16-19 November 2014, Melbourne, Australia
Wolff, T.; Ernst, B.; Seume, J.R. (2014): Aerodynamic Behavior of an Airfoil with Morphing Trailing Edge for Wind Turbine Applications, The Science of Making Torque from Wind 2014, 18-20 June 2014, Copenhagen, Denmark
Wolff, T.; Herbst, F.; Freund, O.; Le, L.; Seume, J.R. (2014): Validating the Numerical Prediction of the Aerodynamics of an Axial Compressor, Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25530
Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Impact of Defects and Damage in Aircraft Engines on the Exhaust Jet, Proceedings of the ASME Turbo Expo, ASME, 3-7 June 2013, San Antonio, USA, GT2013-95709
Adamczuk, R.; Hartmann, U.; Seume, J.R. (2013): Experimental Demonstration of Analyzing an Engine’s Exhaust Jet with the Background-Oriented Schlieren Method, AIAA Ground Testing Conference, 24-27 June 2013, San Diego, USA
Adamczuk, R.; Seume, J.R. (2013): Early Assessment of Defects and Damage in Jet Engines, 2nd International Through-life Engineering Services Conference, 2013, Cranfield, England
Aschenbruck, J.; Meinzer, C.E.; Pohle, L.; Panning-von Scheidt, L.; Seume, J.R. (2013): Regeneration-Induced Forced Response in Axial Turbines, Proceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95431
Aschenbruck, J.; Meinzer, C.E.; Seume, J.R. (2013): Influence of Regeneration-Induced Variances of Stator Vanes on the Vibration Behavior of Rotor Blades in Axial Turbines, Proceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-113
Bartelt, M.; Laguna, J.D.; Seume, J.R. (2013): Synthetic Sound Source Generation for Acoustical Measurements in Turbomachines, Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95045
Belz, J.; May, M.; Siemann, J.; Seume, J.R.; Voigt, C.; Boehmer, H.; Grueber, B. (2013): Excited Blade Vibration for Aeroelastic Investigations of a Rotating Blisk using Piezo-Electric Macro Fiber Composites, Proceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA, GT2013-95735
Biester, M. H.-O.; Karapetrow, D.;Seume, J.R. (2013): Effect of the Tip Clearance on End Wall Heat-Transfer in a HP Turbine, Proceedings of the ASME Turbine Blade Tip Symposium, 30 September - 3 October 2013, Hamburg, Germany, TBTS2013-2069
Biester, M. H.-O.; Wiegmann, F.; Guendogdu, Y.;Seume, J.R. (2013): Time-Resolved Numerical Study of Axial Gap Effects on Labyrinth-Seal Leakage and Secondary Flow in a LP Turbine, Proceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95628
Herbst, F.; Fiala, A.; Seume, J.R. (2013): Modelling Vortex Generating Jet-Induced Transition in Low-Pressure Turbines, Proceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, USA, GT2013-94962
Hohenstein, S.; Aschenbruck, J.; Seume, J.R. (2013): Aerodynamic Effects of Non-Uniform Surface Roughness on a Turbine Blade, Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT-2013-95433
Hohenstein, S.; Seume J.R. (2013): Numerical Investigation on the Influence of Anisotropic Surface Structures on the Skin Friction, Proceedings of 10th European Conference on Turbomachinery (ETC), 15-19 April 2013, Lappeenranta, Finnland
Kunte, H.; Seume J.R. (2013): Design of a Partial Admission Impulse Turbine for an Automotive ORC-Application, 2nd International Seminar on ORC Power Systems, ASME, 7-8 October 2013, Rotterdam, Netherlands
Laguna, J. D.; Bartelt, M.; Keller, C.; Seume, J.R. (2013): Sensitivity and Uncertainty of the Radial Mode Analysis for Turbomachinery Applications, Proceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-109
Laguna, J.D.; Bartelt, M.; Seume, J.R. (2013): Impact of Swirl on the Sensitivity of the Radial Mode Analysis in Turbomachinery, Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95460
Bartelt, M.; Meinzer, C.E.; Laguna, J.D.; Seume, J.R. (2012): Design Methodology and Experimental Validation of an Aeroacoustic Test Rig for Turbomachinery Applications, Proceedings of 13th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, Tokyo, 2012, ISUAAAT-S12-4
Biester, M. H.-O.; Henke, M.; Gündogdu, Y.; Engel, K.; Seume, J.R. (2012): Unsteady Wake-Blade Interaction: A Correlation between Surface Pressure Fluctuations and Loss Generation, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69616
Chahine, C; Seume, J.R.; Verstraete, T. (2012): The Influence of Metamodeling Techniques on the Multidisciplinary Design Optimization of a Radial Compressor Impeller, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-68358
Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.; Seume, J.R. (2012): Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-69966
Henke, M.; Biester, M. H.-O.; Gündogdu, Y.; Lippl, F.; Mass, E.; Seume, J.R. (2012): Numerical Assisted Design of a Variable Rotating Vane Carrier Device for Turbine Test Rigs with Split Housing Structures using a Segmented Half-Ring Bearing Concept, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April 2012, Honolulu, Hawaii, AIAA 2012-1660
Lietmeyer, C.; Seume, J.R.; Scheuer, R.; Vynnyk, T.; Reithmeier, E., Krawczyk, T.; Denkena, B.; Wojakowski, B.; Kling, R.; Overmeyer, L. (2012): Recent Advances in Manufacturing of Riblets on Compressor Blades and their Aerodynamic Impact, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69067
Adamczuk, R.R.; Seume, J.R. (2011): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions, Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0175
Bartelt, M.; Kwitschinski, T.; Ceyrowsky, T.; Grates, D.; Seume, J.R. (2011): Experimental and Numerical Investigation of Different Rectangular Volute Geometries for Large Radial Compressors, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46296
Biester, M. H.-O.; Müller, L.; Gündogdu, Y.; Seume, J.R. (2011): Time-Resolved Numerical Investigation of the Interaction of Labyrinth Seal Leakage and Main-Flow in a 1.5-Stage LP Turbine, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45883
Ernst, B.; Kammeyer, J.; Seume, J.R (2011): Improved Map Scaling Methods for Small Turbocharger Compressors, Proceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-45345
Freund, O.; Schaefer, P.; Rehder, H.-J.; Roehle, I. (2011): Experimental Investigations on Cooling Air Ejection at a Straight Turbine Cascade using PIV and QLS, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45296
Herbst, F.; Bluemel, S.; Fakiolas, E.; Seume, J.R. (2011): Numerical Investigation of the Interaction between Probe, Flow and Blading in an Axial-Turbine, Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0194
Herbst, F.; Kozulovic, D.; Seume, J.R. (2011): Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine Profiles, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45621
Herbst, F.; Peters, M.; Seume, J.R. (2011): To the Limits of the Application of the BOS Method, Proceedings of the 11th International Conference on Fluid Control, Measurements, and Visualization FLUCOME 2011, 5-9 December 2011, Keelung, Taiwan
Kuschel, M.; Seume, J.R. (2011): Influence of Unsteady Turbine Flow on the Performance of an Exhaust Diffuser, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45673
Lietmeyer, C.; Chahine, C.; Seume, J.R. (2011): Numerical Calculation of the Riblet-Effect on Compressor Blades and Validation with Experimental Results, Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0106
Lietmeyer, C.; Oehlert, K.; Seume, J.R. (2011): Optimal Application of Riblets on Compressor Blades and their Contamination Behavior, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46855
Natkaniec, C.K.; Kammeyer, J.; Seume, J.R. (2011): Secondary Flow Structures and Losses in a Radial Turbine Nozzle, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46753
Opilat, V.; Seume, J.R. (2011): The Effect of the Operating Conditions of the Last Turbine Stage on the Performance of an Axial Exhaust Diffuser, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45668
Opilat, V.; Seume, J.R. (2011): Application of Endoscopic PIV to the Interaction between Turbine and Exhaust Diffuser, Proceedings of the 9th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey
Raetz, H.; Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2011): Numerical Investigation of Aerodynamic Radial and Axial Impeller Forces in a Turbocharger, Proceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-46360
Sadovnichiy, V.; Kuschel, M.; Opilat, V.; Seume, J.R. (2011): Effect of Swirl and Tip Leakage on Flow Structure, Losses and Pressure Recovery in Axial Exhaust Diffuser, Proceedings of the 9th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey
Alhaj, O.; Seume, J.R. (2010): Optical Investigation of Profile Loss in a Linear Turbine Cascade, Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-23166
Herbst, F.; Biester, M. H.-O; Fiala, A.; Engel, K.; Seume, J.R. (2010): Validation of RANS-Modelling Approaches for Active Flow Control by Vortex Generating Jets in a Low-Pressure Turbine Cascade, Proceedings of the 8th International Symposium on Engineering Turbulence Modelling and Measurements – ETMM8, 9-11 June 2010, Marseille, France
Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2010): Tip Leakage in Small Radial Turbines – Optimum Tip-Gap and Efficiency Loss Correlations, Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22680
Mohseni, A.; Goldhahn, E.; Van den Braembussche, R.A.; Seume, J.R. (2010): Novel IGV Designs for Centrifugal Compressors and their Interaction with the Impeller, Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-23048
Vorreiter, A.: Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R. (2010): Numerical Investigations of the Efficiency of Circulation Control in a Compressor Stator, Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22721
Glodic, N.; Bartelt, M.; Vogt, D.; Fransson, T. (2009): Aeroelastic Properties of Combined Mode Shape in an Oscillating LPT Cascade, Proceedings of the 12th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, 1-4 September 2009 London, UK
Goltz, I.; Böhmer, H.; Nollau, R.; Belz, J.; Grueber, B.; Seume, J.R. (2009): Piezo-Electric Actuation of Rotor Blades in an Axial Compressor, Proceedings of 8th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria
Gomez, A.; Seume, J.R. (2009): Modelling of Pulsating Loads on Wind Turbine Blades, Proceedings of the 3rd International Conference on Energy Sustainability, 19-23 July 2009, San Francisco, California, USA, ES2009-90121
Gómez, A.; Seume, J.R. (2009): Aerodynamic Coupling of Rotor and Tower in HAWTs, Proceedings of European Wind Energy Conference (EWEC), 16-19 March 2009, Marseille, France
Sadovnichiy, V.N.; Binner, M.; Seume, J.R. (2009): The Influence of Axial Gaps and Leaned-Twisted Guide Vanes on the Shroud Leackage and Turbine Stage Efficiency, Proceedings of 8th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria
Siemann, J.; Nollau, R.; Grüber, B.; Seume, J.R. (2009): Controlled Excitation of Rotor Blades via Macro Fiber Composites in an Axial Compressor, Proceedings of the 19th International Symposium on Air Breathing Engines, 7-11 September 2009, Montreal, Canada, ISABE-2009-1263
Früh, W.G.; Seume, J.R.; Gomez, A. (2008): Modelling the Aerodynamic Response of a Wind Turbine Blade Passing in Front of the Tower, Proceedings of European Wind Energy Conference (EWEC), 31 March - 3 April 2008, Brussels, Belgium, 163_EWEC2008
Guendogdu, Y.; Vorreiter, A.; Seume, J.R. (2008): Design of a Low Solidity Flow-Controlled Stator with Coanda Surface in a High Speed Compressor, Proceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-51180
Sieker, O.; Seume, J.R. (2008): Effects of Rotating Blade Wakes on Separation and Pressure Recovery in Turbine Exhaust Diffusers, Proceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-50788
Ziaei Rad, M.; Nouri-Broujerdi, A.; Seume, J.R. (2008): Numerical Computation of a Compressible Laminar Flow with Heat Transfer in the Entrance Region of a Pipe, Proceedings of ASME Summer Heat Transfer Conference, 10-14 August 2008, Jacksonville, Florida, USA, HT2008-56199
Barchewitz, L.P.; Seume, J.R. (2007): Dynamic Modelling and Controls of an Air Supply System for In-Flight PEM, Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27900
Herzog, N.; Binner, M.; Seume, J.R.; Rothe, K. (2007): Verification of Low-Flow Conditions in a Multistage Turbine, Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27328
Imetovski. E.; Seume, J.R. (2007): Multi-Stage Effects of Bow and Sweep in a High-speed Axial Compressor, Proceedings of the International Gas Turbine Congress (IGTC), 2-7 Dec. 2007, Tokyo, Japan, IGTC2007-TS-049
Oehlert, K.; Seume, J.R.; Wang, B.; Denkena, B.; Hage, W.; Knobloch, K.; Meyer, R.; Siegel, F.; Ostendorf, A.; Vynnyk, T.; Reithmeier, E. (2007): Exploratory Experiments on Machined Riblets for 2-D Compressor Blades, Proceedings of ASME International Mechanical Engineering Congress & Exposition (IMECE), 11-15 November 2007, Seattle, Washington, USA, IMECE2007-43457
Sadovnichiy, V.N.; Alhaj, O.; Binner, M.; Seume, J.R. (2007): CFD Models for Blade Tip and Diaphragm Gland Leakage Flow in Turbines of Disc-and Diaphragm Design, Proceedings of 7th European Conference on Turbomachinery (ETC), Fluid Dynamics and Thermodynamics, 5-9 March 2007, Athens, Greece
Shaaban, S.; Seume, J.R. (2007): Aerodynamic Performance of Small Turbocharger Compressors, Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27558
Sieker, O.; Seume, J.R. (2007): Influence of Rotating Wakes on Separation in Turbine Exhaust Diffusers, Proceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July 2007, Lyon, France, ISAIF8-0054
Sieker, O.; Seume, J.R. (2007): Influence of Artificial Generated Rotating Wakes on Separating Behaviour of Annular Diffusers, Proceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July, 2007, Lyon, France ISAIF8-0054
Barchewitz, L.P.; Seume, J.R. (2006): Conceptual Analysis of Air Supply Systems for In-Flight PEM-FC, Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90688
Beil, A.; Seume, J.R. (2006): Unsteady Performance of a PEMFC System Including Autothermal Methane Reforming, Proceedings of 4th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97008
Braun, M.; Seume, J.R. (2006): Forward Sweep in a Four-Stage High-Speed Axial Compressor, Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90218
Fischer, K.; Seume, J.R. (2006): Location and Magnitude of Heat Sources in Solid Oxide Fuel Cells, Proceedings of 4th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97167 (auch veröffentlicht in Journal of Fuel Cell Science and Technology, February 2009)
Goldhahn, E.; Seume, J.R. (2006): The Background Oriented Schlieren Technique: Sensitivity, Accuracy, Resolution and Application to a Three-Dimensional Density Field, Proceedings of 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 26-29 June 2006, Lisbon, Portugal (auch veröffentlicht in Experiment in Fluids, July 2007)
Hellmich, B.; Seume, J.R. (2006): Causes of Acoustic Resonance in a High-Speed Axial Compressor, Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90947 (auch veröffentlicht in Journal of Turbomachinery, May 2008)
Oehlert, K.; Seume, J.R. (2006): Exploratory Experiments on Machined Riblets on Compressor Blades, Proceedings of ASME 2nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093
Oehlert, K.; Seume, J.R. (2006): Exploratory Experiments on Machined Riblets on Flat Plates, Proceedings of ASME 2nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093
Griebel, A.; Seume, J.R. (2005): The Influence of Variable Rotor-Stator Interaction on Boundary-Layer Development in an Axial Compressor, Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68902
Herzog, N.; Gündogdu, Y.; Kang, G.; Seume, J.R. (2005): Part Load Operation of a Four-Stage Turbine, Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68700
Schreyer, B.; Seume, J.R. (2005): The Loss Behaviour of Milled Turbine Blades, Proceedings of 6th Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC 6), 7-11 March 2005, Lille, France, Vol. 1, p. 210, AFT-020_03 / 124
Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R. (2005): Improved Diffuser / Internal Volute Combinations for Centrifugal Compressors, Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68894
Hellmich, B.; Seume, J.R. (2004): Acoustic Resonance in a Four-Stage High-Speed Axial Compressor, Proceedings of the 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 7-11 March 2004, Honolulu, Hawaii, ISROMAC10-2004-004
Fischer, A.; Riess, W.; Seume, J.R. (2003): Performance of Strongly Bowed Stators in a 4-Stage High Speed Compressor, Proceedings of the ASME Turbo Expo, 16-19 June 2003, Atlanta, Georgia, USA, GT-2003-38392
Fischer, A.; Seume, J.R. (2003): Comparison of Multistage CFD Calculations and Measurements in a high speed Compressor, Conference on Modelling Fluid Flow (CMFF' 03) The 12th International Conference on Fluid Flow Technologies, 3-6 September 2003, Budapest, Hungary
Hellmich, B.; Braun, M.; Fischer, A.; Seume, J.R. (2003): Observations on the Causal Relationship between Blade count and Developing Rotating Stall in a Four Stage Axial Compressor, Proceedings of 5th European Conference on Turbomachinery (ETC), 17-22 March 2003, Prague, Czech Republic
Fleige, H.-U.; Riess, W.; Seume, J.R. (2002): Swirl and Tip Leakage Flow Interaction with Struts in Axial Diffusers, Proceedings of the ASME Turbo Expo 2002, 3-6 June, Amsterdam, The Netherlands, GT-2002-30491
Harbecke, U.G.; Riess, W.; Seume, J.R. (2002): The Effect of Milling Process Induced Coarse Surface Texture on Aerodynamic Turbine Profile Losses, Proceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30333
Hasemann, H.; Rautenberg, M.; Hagelstein, D.; Sonthipermpoon, K. (2002): The Vibration Behavior of Centrifugal Impeller Blades in the Five-Axis CNC Flank Milling Process, Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 730-736
Hellmich, B.; Fischer, A.; Reissner, A.; Runkel, J.; Seume, J.R. (2002): Estimation of the Rotating Frequency from Rotor Frequency and Common Blade Number Integer Fractions in a Four Stage Axial Compressor, Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 737-744
Levy, Y.; Pismenny, J.; Reissner, A.; Riess, W. (2002): Experimental Study of Rotating Stalls in a Four-Stage Axial Compressor, Proceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30362
Runkel, J.; Hellmich, B. (2002): Operating Experience with an On-Line Vibration Control System for PRW Main Coolant Pumps, Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. I, pp. 243-250
Chen, J.; Hasemann, H.; Cheng, X.; Rautenberg M. (2001): Stall Inception Behaivior in a Centrifugal Compressor Re-examined using Wavelet Method, Proceedings of 5th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland
Chen, Y.N.; Hagelstein, D.; Haupt, U.; Rautenberg, M. (2001): Behavior of Deep Surge of Centrifugal Compressors, Proceedings of 5th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland
Fleige, H.-U.; Riess, W. (2001): Investigations of Gas Turbine Exhaust Diffuser, Proceedings of 4th European Conference on Turbomachinery (ETC), 20-23 March 2001, Firenze, Italy
Harbecke, U.; Riess, W. (2001): Experimental and Numerical Investigation of a Technically Rough Turbine Blade Cascade, Proceedings of 4th European Conference on Turbomachinery (ETC), 20-23 March 2001, Firenze, Italy
Notkina, I.M.; Strizhak, L.J.; Suslina, L.P.; Beyer, B.; Bahm, F.; Rautenberg, M. (2001): Investigation of Three-Dimensional Compressible Turbulent Flow in a Vaneless Diffuser of a Radial Turbomachine Stage, Proceedings of 5th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland
Chen, Y.N.; Hagelstein, D.; Kassens, I.; Haupt, U.; Rautenberg, M. (2000): Effect of the Decaying Overshoot of the Rankine Vortex on the Axial Flow Field Behind the Inlet Guide Vane of Centrifugal Compressors, 45th International Gas Turbine and Aeroengine Congress and Exhibition of the ASME, 8-11 May 2000, Munich, Germany, ASME-Paper 2000-GT-0427
Gehring, S.; Riess, W. (2000): Analysis of the Mixing Process in a 1.5 Stage Turbine with Coolant Ejection, Proceedings of the ASME Turbo Expo, 8-12 May 2000, Munich, Germany, 2000-GT-669
Hellmich, B.; Fiedler, J.; Runkel, J.; Stegemann, D. (2000): The Influence of Different SPN-Detector Emitter Materials to the Results of Neutron Noise Analysis, Proceeding of Physor, 7-12 May 2000, Pittsburgh, Pennsylvania, USA
Runkel J.; Fiedler, J.; Stegemann, D. (2000): Results of Noise Diagnostics in Different Reactor Types within International Scientific and Technological Cooperation Programs, Proceedings of NPIC & HMIT, 13-17 November 2000, Washington D.C., USA
Runkel, J.; Heidemann, P.; Stegemann, D. (2000): Localization of Impacting Instrument Tubes Inside Operating Boiling Water Reactors by Use of Incore Accelerometers, Proceedings of NPIC & HMIT, 13-17 November 2000, Washington D.C., USA
Runkel, J.; Stegemann, D.; Fiedler, J.; Heidemann, P. (2000): Vibration Monitoring by Neutron Noise Analysis and Acceleration Measurements inside Operating Nuclear Power Reactors, Proceeding of Physor, 7-12 May 2000, Pittsburgh, Pennsylvania, USA
Gehring, S.; Riess, W. (1999): Throughflow Analysis for Cooled Turbines, Proceedings of 3rd European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC), 2-5 March 1999, London, UK, IMechE 1999 C557/022, pp 79-88
Runkel, J.; Stegemann, J.; Fiedler, P.; Heidemann, R.; Blaser, R.; Schmid, F.; Trobitz, M.; Hirsch, L.; Thoma, K. (1999): New Technologies for Acceleration and Vibration Measurements Inside Operating Nuclear Power Reactors, Proceedings of the Workshop on Core Monitoring for Comercial Reactors: Improvements in Systems and Methods, 4-5 October 1999, Stockholm, Sweden, pp. 103-115
Beyer, B.; Hasemann, H.; Rautenberg, M. (1998): The Use of Axial Flow Turbines for Driving Centrifugal Compressors, Proceedings of 6th International Conference on Turbocharging and Air Management Systems, 3-5 November 1998, London, UK, IMechE 1998 C554/021, pp 183-192
Hermann, J.; Hantschk, C.C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A.; Seume, J.R.; Vortmeyer, N.; Krause, W. (1997): Aktive Instabilitätskontrolle an einer 170 MW Gasturbine , 18. Deutsch-Niederländischer Flammentag, 28-29 August 1997, Delft, Netherlands, VDI-Berichte 1313, pp. 337-344
Johnson, T.; Becker, B.; Seume, J.R.; Termuehlen, H. (1997): First V84.3A Gas Turbine Installation at Hawthorn Station, Proceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357
Petrovic, M.; Riess, W. (1997): Off-Design Flow Analysis and Performance Prediction of Axial Turbines, Proceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357
Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A. (1997): Application of Active Combustion Instability Control to a Heavy Duty Gas Turbine, Proceedings of ASME Asia Congress and Exposition, 30 September – 02 October 1997, Singapore (auch veröffentlicht in Journal of Engineering for Gas Turbines and Power, October 1998)
Böhm, W.; Raake, D.; Regnery, D.; Seume, J.R.; Terjung, K. (1996): Testing the Model V84.3A Gas Turbine – Experimental Techniques and Results, Proceedings of International Gas Turbine and Aeroengine Congress and Exposition, 5-7 November 1996, Jakarta, Indonesia, ASME -Paper 96-TA-14
Janssen, M.; Mönig, R.; Seume, J.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E. (1994): The Model V 84.3 Shop Tests: Compressor Flow Field Measurements and Evaluation, Proceedings of International Gas Turbine and Aeroengine Congress and Exposition, 13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-462
Janssen, M.; Seume, J.R.; Zimmermann, H. (1994): The Model V 84.3 Shop Tests: Tip Clearance Measurements and Evaluation, Proceedings of International Gas Turbine and Aeroengine Congress and Exposition,13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-319
Seume, J.R.; Simon, T.W. (1987): Flow Oscillation Effects in Tubes and Porous Material: Unresolved Issues, Beitrag in: Morel, T.E., Dudenhoefer, J.E., Uzkan, T., Singh, P.J. (Hrsg.): Fluid Flow and Heat Transfer in Reciprocating Machinery. ASME Winter Annual Meeting, 1987, Boston, Massachusetts, USA, pp. 55-62 New York: American Society of Mechanical Engineers 1988
Rautenberg, M.; Malobabic, M. (1985): On Turbochargers with Variable Geometry, Gas Turbine Conference and Exhibit, 18-21 March 1985, Houston, Texas, ASME Paper 85-T-149
International Conference Paper, not peer-reviewed
Hain, R.; Fuchs, T.; Wein, L.; Kluge, T.; Seume, J.; Kähler, C. J. (2019): Stereoscopic PTV measurements in the housing/rotor cavity of a shrouded turbine rotor, Proceedings of the 13th International Symposium on Particle Image Velocimetry 2019
Mimic, D.; Jätz, C.; Oettinger, M.; Herbst, F.; Seehausen, H.; Kurth, S.; Frieling, D.; Zieße, M.; Seume, J. R. (2019): Improving Aerothermal and Aeromechanical Turbomachinery Design by Combining High-Fidelity Methods with Multi-Stage Approaches, Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-PL3
Mimic, D.; Jätz, C.; Sauer, P.; Herbst, F. (2019): Total Pressure Loss Reduction in Annular Diffusers , International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), April 2019, Volume 10, Number 2
Schwerdt, L.; Willeke, T.; Huxdorf, O.; Krone, J.-H.; Friedrichs, J.; Riemenschneider, J.; Monner, H.P.; Seume, J.R. (2019): Active Flow Control in an Axial Compressor by Zero-Net-Mass-Flux Actuation, Proceedings of the 14th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows 8-11 July 2019, Gdansk, Poland, ISAIF14-084
Bittner, S.L.; Keller, C.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of a Forced Response Analysis Using a Time-Linearized Method, AIAA SciTech, 8-12 January 2018, Kissimmee, Florida, AIAA 2018-0461
Bode, C.; Friedrichs, J.; Kellersmann, A.; Herbst, F.; Seume, J.R. (2018): Modeling Transient Aircraft Engine Operation, 13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA
Gilge, P.; Seume, J.; Mulleners, K. (2018): Effect Of Surface Roughness On The Characteristic Length Scales In The Wake Of A Compressor Blade: A POD Analysis, 19th International Symposium on the Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 July 2018, Lisbon, Portugal
Gilge, P.; Seume, J.R.; Mulleners, K. (2018): Analysis of Local Roughness Combinations on the Aerodynamic Properties of a Compressor Blade, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0345
Gößling J.; Ahlefeldt, T.; Mumcu, A.; Hilfer, M. (2018): Experimental validation of unsteady pressure-sensitive paint for acoustic applications, 5th International Conference on Experimental Fluid Mechanics ICEFM, 2018, Munich
Hartmann, U.; Von der Haar, H.; Dinkelacker, F.; Seume, J.R. (2018): Experimental Defect Detection in a Swirl-Burner Arry Through Exhaust Jet Analysis, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0303
Hauptmann, T.; Seume, J.R. (2018): Blade Vibration Measurements in a Multi-Stage Axial Turbine with Geometric Variations, 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-0952
Henke, M.; Herbst, F.; Rätz, H.; Seume, J.R. (2018): A New Facility for Dynamic Turbomachinery and Wind-Tunnel Testing, XXIV Biannual Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines
Herbst, F.; Müller-Schindewolffs, C.; Schwarzbach, F.; Zieße, M.; Bode, C. (2018): Appropriate Inlet Boundary Conditions for Scale-Resolving Simulations of Turbomachinery Configurations, 13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA
Jätz, C.; Mimic, D.; Herbst, F.; Seume, J.R. (2018): Prediction Performance of the k-ε Elliptic-Blending Turbulence Model in Axial Diffusers, Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS48
Kurth, S.; Hamann, C.; Seume, J.R.; Mulleners, K. (2018): Experimental Investigation of the Influence of Anisotropic Surface Structures on the Boundary Layer Flow, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0585
Mumcu, A; Thouault, N.; Seume, J.R. (2018): Aeroacoustic Testing for Sound Propagation through Turbine Vanes, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-1003
Narjes, G.; Kauth, F.; Müller, J.; Mertens, A.; Seume, J.R.; Ponick, B. (2018): High-Speed Permanent Magnet Synchronous Machine for Short-Term Operation in an Electrically Powered High-Lift System, AIAA/IEEE Electric Aircraft Technologies Symposium, AIAA Propulsion and Energy Forum, 9-11 July 2018, Cincinnati, Ohio, USA, AIAA2018-4989
Shimada, T.; Takahashi, Y.; Kuboyama, T.; Moriyoshi, Y.; Fischer, T. (2018): A simple System for Turbocharger Bearing Friction Measurement using Deceleration Method, 23. Aufladetechnische Konferenz, 20.-21. September 2018, Dresden
Kauth, F.; Narjes, G.; Müller, J.; Seume, J.R.; Vasista, S.; Müller, T.; Francois, D.G.; El Sayed M., Y.; Semaan, R.; Behr, C.; Schwerter, M.; Leester-Schädel, M.; Nolte, F.; Giesecke, D.; Atalayer, C.; Radespiel, R. (2017): Progress in Efficient Active High-Lift, 35th AIAA Applied Aerodynamics Conference, AIAA AVIATION Forum, 5-9 June 2017, Denver, Colorado
Koepplin, V.; Seume, J.R.; Herbst, F. (2017): Investigation of Local Flow Phenomena of Misaligned Riblets in a Turbulent Boundary Layer, European Drag Reduction and Flow Control Meeting, 6 April 2017, Frascati, Rome, Italy.
Siemann, J.; Schwerdt, L.; Willeke, T.; Seume, J.R. (2017): Active Flow Control by Aspiration and Injection in Multi-Stage Axial Compressors, Technical Keynote at Global Power & Propulsion Inaugural Forum, Zurich, Switzerland, 16-18 January 2017
Bode, C.; Friedrichs, J.; Müller, C.; Herbst, F. (2016): Application of Crossflow Transition Criteria to Local Correlation-Based Transition Model, 52nd AIAA/SAE/ASEE Joint Propulsion Conference, Propulsion and Energy Forum, Salt Lake City, Utah, USA, AIAA 2016-5054
Burgmann, S.; Fischer, T.; Rudersdorf, M.; Seume, J.R. (2016): Entwicklung eines Kleingebläses mit querschnittsvariablem Diffusor und Volute zur Wirkungsgradsteigerung im Teillastbetrieb, 24. Fachtagung „Lasermethoden in der Strömungsmesstechnik“, 6-8 Sept. 2016, Cottbus
Ernst, B.; Seume, J.R.; Herbst, F. (2016): Probabilistic CFD-Analysis of Regeneration-Induced Geometry Variances in a Low-Pressure Turbine, 52nd AIAA/SAE/ASEE Joint Propulsion Conference 2016, AIAA Propulsion and Energy Forum, 25-27 July 2016, Salt Lake City, Utah, USA, AIAA 2016-4555
Fischer, T.; Seume, J.R. (2016): Low Inertia Centrifugal Compressor Wheels: Aerodynamic and Mechanical Design, IEEE Conference Publications, 2016 International Conference on Applied System Innovation (ICASI)
Kauth, F., Narjes, G., Müller, J., Mertens, A., Ponick, B., and Seume, J.R. (2016): Highly Integrated Electrically Driven Active High-Lift Compressor Systems for Future Civil Aircraft, Greener Aviation Conference, 11-13 October 2016, Brussels, Belgium
Mai, H.; Rätz, H.; Weigl, S.; Kunte, H.S.; Willers, O.; Nascimento, D.; Seume, J.R. (2016): Design and development of a component test bench for the investigation of automotive ORC systems, 16th Stuttgart International Symposium, FKFS, 15-16 March 2016, Stuttgart; proceedings pp. 1495-1514, Springer, Wiesbaden
Neuhaus, L.; Gilge, P.; Seume, J.R.; Mulleners, K. (2016): Influence of Surface Roughness on the Turbulent Properties in the Wake of a Turbine Blade, 18th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 4-7 July 2016, Lisbon, Portugal
Gilge, P.; Mulleners, K. (2015): On the Resulting Aerodynamic Loss of Combinations of Localized Surface Roughness Patches on a Turbine Blade, 33rd AIAA Applied Aerodynamics Conference, AIAA Aviation 2015, 22-26 June 2015, Dallas, USA, AIAA-2015-3161
Hamann, C.; Kurth, S.; Mulleners, K. (2015): Towards Quantifying Effects of Refractive Index Mismatch on PIV Results, 11th International Symposium on Particle Image Velocimetry - PIV15, 14-16 September 2015, Santa Barbara, USA
Hartmann, U.; Adamczuk, R.; Seume, J.R. (2015): Tomographic Background Oriented Schlieren Applications for Turbomachinery, 53rd AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 5-9 January 2015, Kissimmee, Florida, AIAA2015-1690
Hauptmann, T.; Aschenbruck, J.; Christ, P.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2015): Influence of Combustion Chamber Defects on the Forced Response Behavior of Turbine Blades, Proceedings of the 14th International Symposium on Unsteady Aerodynamics, Aeroacoustics & Aeroelasticity of Turbomachines, ISUAAAT14, 8-11 September 2015, Stockholm, Schweden
Kunte, H.; Seume, J.R. (2015): Experimental Setup of a small supersonic Turbine for an Automotive ORC Application running with Ethanol, 3rd International Seminar on ORC Power Systems, City of Brussels, Belgium
Samarbakhsh, S.; Meinzer, C.E.; Laumert, B.; Seume, J.R. (2015): On Non-Synchronous Vibrations: Lock-In Effects of an Eccentrically Rotating Cylinder, Proceedings of the 14th International Symposium on Unsteady Aerodynamics, Aeroacoustics&Aeroelasticity of Turbomachines, ISUAAAT 14, 8-11 September 2015, Stockholm, Sweden
Teichel, S.; Radespiel, R.; Burnazzi, M.; Dietzel, A.; Leester-Schädel, M.; Schwerter, M.; Sinapius, M.; Behr, C.; Monner, H.P.; Rudenko, A.; Horst, P.; Schmitz, A.; Ponick, B.; Dörbaum, M.; Mertens, A.; Merkert, A.; Friedrichs, J.; Atalayer, Ç.; Seume, J.R. (2015): SFB 880 - Efficient High Lift, Proceedings of 5th International Workshop on Aircraft System Technologies, 24-25 March 2015, Hamburg, Germany, Shaker, Aachen
Waite, J.J.; Kielb, R.E.; Bittner, S.L. (2015): The Influence of Steady Loading Parameters on Low-Pressure Turbine Flutter, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, 5-9 January 2015, Kissimmee, USA, AIAA 2015-1417
Wolff, T.; Seume, J.R. (2015): Airfoil with Morphing Trailing Edge for Load Reduction in Wind Turbines, 33rd Wind Energy Symposium, AIAA Scitech, 5-9 January 2015, Kissimmee, FL/USA, AIAA 2015-1662
Adamczuk, R.; Hartmann, U.; Seume, J. (2014): Application of the Background-Oriented Schlieren Method for the Analysis of an Engine’s Exhaust Jet, XXII Biannual Symposium on Measuring Techniques in Turbomachinery, 4-5 September 2014, Lyon, France, MTT2214-A514
Asche, D.; Lietmeyer, C.; Schwerdt, L.; Seume, J.R. (2014): Particle Concentration and Velocity Measurements in a Cascade Wind Tunnel by Means of L2F, XXII Biannual Symposium on Measuring Techniques in Turbomachinery, 4-5 September 2014, Lyon, France, MTT2214-A513
Brand, C.R.; Seume, J.R. (2014): Flaps for Wind Turbine Applications: First Results of the Experimental Investigations, Wind Turbine Sound 2014 - EWEA Technology Workshop, Malmö, Sweden
Brand, C.R.; Seume, J.R. (2014): Flaps for Wind Turbine Application: Noise Source Localization on a Test Airfoil, Proceedings of the 10th PhD Seminar on Wind Energy in Europe, October 28-31, 2014, Orléans, France
Müller, C.; Herbst, F. (2014): Modelling of Crossflow-Induced Transition Based on Local Variables, 11th World Congress on Computational Mechanics, 5th European Conference on Computational Mechanics, 6th European Conference on Computational Fluid Dynamics, 20–25 July 2014, Barcelona, Spain
Winstroth, J.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: Assessment on a Scaled Model, 32nd ASME Wind Energy Symposium, 13-17 January 2014, National Harbor, Maryland
Winstroth, J.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: 3D Simulation of the Experimental Setup, EWEA 2014, 10-13 March 2014, Barcelona, Spain
Wolff, T.; Seume, J.R. (2014): Numerical Investigation of an Airfoil with Morphing Trailing Edge for Load Reduction, Proceedings of the 10th PhD Seminar on Wind Energy in Europe, October 28-31, 2014, Orléans, France
Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Assessment of Defects and Damage in Jet Engines, International Conference MRO Maintenance, Repair and Overhaul, 2013, Berlin
Biester, M. H.-O.; Gündogdu, Y.; Seume, J.R. (2013): Clocking Effects on Surface-Pressure Fluctuations for Variable Axial-Gaps, 21st AIAA Computational Fluid Dynamics Conference, 24-27 June 2013, San Diego, USA. AIAA-2013-2955
Ernst, B.; Seume, J.R. (2013): Modelling Structural Uncertainty of Wind Turbine Rotor Blades for Aeroelastic Investigations, Seventh M.I.T. Conference on Computational Fluid and Solid Mechanics - Focus: Multiphysics & Multiscale, June 12-14, 2013, Massachusetts Institute of Technology, Cambridge, MA 02139 USA
Kunte, H.; Seume J.R. (2013): Partial Admission Impulse Turbine for Automotive ORC Application, 11th International Conference on Engines & Vehicles, Capri/Neapel, Italy
Laguna, J.D.; Bartelt, M.; Seume J.R. (2013): Radial Mode Analysis in an Aero-Acoustic Wind Tunnel, AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy – Veröffentlichung und Posterbeitrag
Meinzer, C.E.; Freund, O.; Seume J.R. (2013): Design and Operation of an Acoustic System for Traveling Wave Excitation, AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy
Sadovnichiy, V. N.; Drechsel, B.; Seume, J.R. (2013): Influence of Swirl Flow on Distribution of Loss Components in Axial Annular-Conical Diffusers, Proceedings of 11th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 6-11 May 2013, Shenzen, China
Teichel, S.H.; Verstraete, T.; Seume, J.R. (2013): Optimized Preliminary Design of Compact Axial Compressors: A Comparison of Two Design Tools, 31st AIAA Applied Aerodynamics Conference, 24-27 June 2013, San Diego, USA, AIAA-2013-2651
Witthaus, S.; Bartelt, M.; Seume, J.R. (2013): Sensitivity Study of the Sound Radiation of Aircraft Engine Compressors According to Different Inlet Conditions, AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy
Bartelt, M; Freund, O.; Seume, J.R.; Panning-von Scheidt, L.; Röhle, I.; Buske, C. (2012): Aeroakustik & Aeroelastik der Strömungsmaschinen – Eine Vorlesung als Reaktion auf aktuelle Anforderungen der Turbomaschinenentwicklung, 38. Jahrestagung für Akustik – DAGA 2012, 19.-22. März 2012, Darmstadt
Ernst, B.; Gònzales, A.; Bloh, M.; Seume, J.R. (2012): Implementation of the Cuckoo Search Algorithm to Optimize the Design of Wind Turbine Rotor Blades, Proceedings of the EWEA Annual Event, 16-19 June 2012, Copenhagen, Denmark
Laguna, J.; Bartelt, M.; Drechsel, B.; Seume, J.R. (2012): Entwicklung einer variablen Messeinheit für Schallfeldanalysen in Turbomaschinen, 38. Jahrestagung für Akustik – DAGA 2012, Darmstadt
Lin, S.Y.; Mulleners, K.; Seume, J.R. (2012): Effect of Spinner Geometry on the Flow Near the Hub of Modern Wind Turbines, Proceedings of 8th PhD Seminar on Wind Energy in Europe, September 12-13, 2012, ETH Zurich, Switzerland - Posterbeitrag
Seume, J.R.; kleine Sextro, T. (2012): The Potential of Variable Inlet Guide Vanes for Turbocharger Compressors, 4th International Congress on Advanced Downsizing & Turbocharging Concepts, 26-28 March 2012, Stuttgart, Germany
Winstroth, J.; Seume, J.R. (2012): New Test Bench for Optical Measurements of Rotor Blade Deformations on Wind Turbines, Proceedings of 8th PhD Seminar on Wind Energy in Europe, September 12-13, 2012, ETH Zurich, Switzerland
Adamczuk, R.; Aschenbruck, J.; Bartelt, M.; Herbst, F.; Seume, J.R. (2011): Inverse Methods in Turbomachinery Applications, Aachen Conference on Computational Engineering Science, ACCES 2011, Aachen
Biester, M. H.-O.; Henke, M.; Seume, J.R. (2011): Numerically Optimized Design of a 1.5-Stage Turbine Test-Rig Instrumentation, Workshop of the DGLR-Section Thermo- and Fluid-Dynamics, CFD and Experiment – Integration of Simulation, Göttingen, Germany
Eilts, P.; Herbst, F.; Kammeyer, J.; Natkaniec, C.; Porzig, D.; Sextro, T.; Schwarze, H.; Seume, J.R.; Stöber-Schmidt, C.-P. (2011): The Potential of Variable Compressor Geometry for Highly Boosted Gasoline Engines, SAE World Congress & Exhibition, 12-14 April 2011, Detroit, USA, 11PFL-0413
Kammeyer, J.; Natkaniec, C.K. (2011): Workshop: Turbocharger – Future Demands for Downsizing Applications, 3rd International Conference on Downsizing and Turbocharging Concepts, 9-11 March 2011, Wiesbaden, Germany
Natkaniec, C.K.; Kammeyer, J.; Seume, J.R. (2011): Influence of Variable Nozzle Geometry on Radial Turbine Performance, Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0112
Seume, J.R.; Kammeyer, J.; Natkaniec, C. (2011): Turbocompressor and Turbine Design for Downsizing Applications, 3rd International Conference on Downsizing and Turbocharging Concepts, 9-11 March 2011, Wiesbaden, Germany
von Seggern, H.G.; Haslbeck, K.; Seume, J.R. (2011): Numerical Study of Aerosol Generation in the Deep Human Lung, Proceedings of 10th International Symposium on Experimental and Computationel Aerothermodynamics of Internal Flows (ISAIF), 4-7 June 2011, Brussels, Belgium
von Seggern, H.G.; Seume, J.R. (2011): Numerical Study of Aerosol Generation in the Deep Human Lung – Fluence of Chronic Lung Injuries, Proceedings of international 18th Congress of the International Society for Aerosols in Medicine, 18-22 June 2011, Rotterdam, the Netherlands
Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2010): Influence of Tip-Gap Losses on the Stage Efficiency of Downsizing Turbocharger Turbines, Proceedings of 9th International Conference on Turbochargers and Turbocharging (IMechE), 19-20 May 2010, London, UK
Kammeyer, J.; Seume, J.R. (2010): Gasturbine Range Extender – Serial Full Hybrid, IZB 2010 Workshop, October 7, Wolfsburg
Bartelt, M.; Mohseni, A.; Opilat, V.; Seume, J.R. (2009): Endoscopic Stereoscopic PIV Measurements in Turbomachines, Posterbeitrag International Symposium on 25 Years of Particle Image Velocimetry in Aerodynamics, 23-25 September 2009, Göttingen, Germany
Haslbeck, K.; Seume, J.R. (2009): Aerosol Formation in the Alveoli – in Search of Sensitive Parameters Using Computational Fluid Dynamics, Proceedings of 17th International Congress of the International Society for Aerosols in Medicine, 10-14 May 2009, Monterey, California, USA, Abstract in the Journal of Aerosol Medicine and Pulmonary Drug Delivery, Vol. 22, Issue 2, p. 204
Kleppa, O.; Barchewitz, L.P.; Seume, J.R. (2009): Conceptual Analysis, Dynamic Modelling and Controls of an Air Supply System for In-Flight Proton Exchange Membrane Fuel Cells (PEM-FC), Proceedings of 2nd International Workshop on Aircraft System Technologies, 26-27 March 2009, Hamburg, Germany
Kuschel, M.; Seume, J.R. (2009): Influence of the wakes of Rotating Spokes on the Performance of a Turbine Exhaust Diffuser, Proceedings of 9th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF9), 8-11 September 2009, Gyeongju, Korea, Paper No. isaif9-055
Gómez, A.; Seume, J.R. (2008): Rotor-Tower Interaction in HAWTs, Proceedings of 4th PhD Seminar on Wind Energy in Europe, 1-2 October 2008, Magdeburg, Germany
Haslbeck, K.; Seume, J.R. (2008): Numerical Analysis of the Formation Process of Aerosols in the Alveoli, 61st Annual Meeting of the APS Division of Fluid Dynamics, 23-25 November 2008, San Antonio, Texas, USA, Abstract in the Bulletin of the American Physical Society Vol. 53, Issue 15, p. 115
Henke, M; Guendogdu, Y.; Seume, J.R.; Siewert, C.; Panning, L.; Wallascheck J. (2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of Turbine Blading, Proceedings of 9th International Conference on Vibrations in Rotating Machinery (IMechE), 08.- 10. September 2008, Exeter, UK
Beil, A.; Seume, J.R. (2006): Conceptual Analysis and Preliminary Design of a Centrifugal Compressor for an In-flight PEMFC Air Supply System, H2-Expo, International Conference and Trade Fair on Hydrogen and Fuel Cell Technologies, 25-26 October 2006, Hamburg, Germany
Seume, J.R.; Herbst, F.; Missirlis, D.; Yakinthos, K.; Goulas, A. (2006): Numerical Model of the Unsteady Interaction between Probe and Flow in Axial Turbomachinery, XVIII Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines, 21-22 September 2006, Thessaloniki, Greece
Shaaban, S.; Seume, J.R. (2006): Analysis of Turbochargers Non-Adiabatic Performance, Proceedings of 8th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2006, London, UK, C647/027
Shaaban, S.; Seume, J.R.; Berndt, R.; Pucher, H.; Linnhoff, H.-J. (2006): Part-Load Performance Prediction of Turbocharged Engines, Proceedings of 8th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2006, London, UK, C647/019
Kang, G.; Seume, J.R.; Gündogdu, Y.; Herzog, N.; Rothe, K. (2005): Development of a Measuring Technique for the Investigation of Windage Phenomena in a Four-Stage Air Turbine, Proceedings of 7th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 11-15 September 2005, Tokyo, Japan, Vol. 1, pp. 31-36
Pietrasch, R.Z.; Seume, J.R. (2005): Interaction between Struts and Swirl Flow in Gas Turbine Exhaust Diffusers, Proceedings of 7th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 11-15 September 2005, Tokyo, Japan, Vol. 1, pp. 37-42
Hagelstein, D.; Beyer, B.; Seume, J.R.; Rautenberg, M.; Hasemann, H. (2002): Heuristical View on the Non-Adiabatic Coupling System of Combustion Engine and Turbocharger, Proceedings of 7th International Conference on Turbochargers and Turbocharging (IMechE), 14-15 May 2002, London, UK, pp. 349-360
Mobarak, A.; Rautenberg, M.; Hagelstein, D. (2000): Energy and Environment in the Global World, 7th International Conference on Energy and Environment, Cairo, Egypt, 11-13 March 2000
Sentker, A.; Riess, W. (2000): Three Dimensional Unsteady Flow and Turbolence in a Two-Stage Axial Compressor, Proceedings of 9th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, 4-8 September 2000, Lyon, France
Riess, W.; Walbaum, M. (1995): Initiation and Propagation of Flow Instabilities in Multi-Stage Axial Compressors, AGARD PEP 85th Symposium on “Loss Mechanisms and Unsteady Flows in Turbomachines”, 8-12 May 1995, Derby, UK
Janssen, M.; Seume, J.R.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E. (1993): Flow Field Analysis of the Axial Compressor of the Siemens V84.3., 20th International Congress on Combustion Engines (CIMAC), 1993, London, UK
Beale, W.T.; Seume, J.R. (1989): Solar-Powered Free-Piston Stirling Generator, 4. Jahreskongress des International Hightech-Forum Basel „Umwelt und regenerative Energie-Sonnenenergie und solarer Wasserstoff“, 30 November - 01 December 1989, Basel, Switzerland
Seume, J.R.; Simon, T.W. (1988): Effect of Transition on Oscillating Flow Losses in Stirling Engine Coolers and Heaters, 23th Intersociety Energy Conversion Engineering Conference, 1988, New York, New York, USA, pp. 127-132
Goldberg, L.F.; Seume, J.R.; Simon, T.W. (1987): Description of an Oscillating Flow Test Program, 22th Intersociety Energy Conversion Engineering Conference, 1987, New York, New York, USA, pp. 1753-1758
Seume, J.R.; Simon, T.W. (1986): Oscillating Flow in Stirling Engine Heat Exchangers, 21th Intersociety Energy Conversion Engineering Conference, 1986, Washington D.C., USA, pp. 533-538
National Scientific Journal Paper, not peer-reviewed
Kwitschinski, T.; Henke, M.; Bartelt, M. Seume, J.R. (2020): Ventilation im Teil- und Schwachlastbetrieb von HD- und ND-Dampfturbinen, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 379-394
Willeke, T.; Herbst, F; Seume, J.R. (2016): Strömungsbeeinflussung für zukünftige Flugtriebwerke, Ingenieurspiegel, Ausgabe März 2016
Müller, C.; Herbst, F; Seume, J.R. (2015): Turbomaschinen in Flugzeugen: Entwicklung, Optimierung und Regeneration für Flugtriebwerke und Kompressoren, Ingenieurspiegel, Ausgabe März 2015
Schmidt, B.; Ernst, B.; Wilms, M.; Hildebrandt, A.; Hansen, M. (2014): Messdatenbasierte Empfehlungen von Wind- und Wellenparametern für die Auslegung von Offshore-Windenergieanlagen, Bautechnik, 91: 533-542
Rolfes, R.; Schaumann, P.; Seume, J.R., et al. (2009): Windenergieforschung an der Leibniz Universität Hannover, Unimagazin Hannover, Ausgabe 1/2-2009
Seume, J.R.; Kuschel, M. (2009): Einsatzfeld Turbomaschinen – Effiziente Turbinen für Umweltfreundliche Kraftwerke, Unimagazin Hannover, Ausgabe 1/2-2009
Seume, J.R.; Wark, M.; Kleppa, O. (2009): Brennstoffzellen – Saubere und effiziente Stromproduktion der Zukunft, Unimagazin Hannover, Ausgabe 1/2-2009
National Conference Paper, not peer-reviewed
Amer, M.; Maroldt, N.; Seume, J.R. (2020): Investigation of Multiharmonic Effects in a Single Stage High Speed Compressor, Deutscher Luft- und Raumfahrtkongress 2019, Darmstadt, Deutsche Gesellschaft für Luft- und Raumfahrt
Kleppa, O.; Henke, M.; Seume, J.R. (2020): Verbesserte Nutzung betriebs-beanspruchter Bauteile durch gezielte Regeneration, Deutscher Luft- und Raumfahrtkongress 2010
Willeke, S.; Schmolke, D.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J.R. (2020): Mistuning mit Aero-Kopplung II - Abschlussbericht No 1269, FVV-Informationstagung Turbomaschinen, Forschungsvereinigung Verbrennungskraftmaschinen, Würzburg
Oettinger, M.; Prohaska, P.; Schwerdt, L.; Panning-von Scheidt, L.; Herbst, F.; Seume, J.R. (2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen Aeroderivaten, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019 (Kraftwerkstechnisches Kolloquium, Dresden)
Schwerdt, L.; Seume, J.R. (2018): Implementation and Experimental Verification of Active Flow Control by Jet Injection over a Coanda Surface in a Multi-Stage High-Speed Axial Compressor, 5th International Conference on Experimental Fluid Mechanics ICEFM 2018 Munich, Germany, July 2-4, 2018
Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2017): Kompakte elektrisch angetriebene Turbokompressoren für ein aktives Hochauftriebssystem künftiger Verkehrsflugzeuge, E-MOTIVE Expertenforum, 5-6 September 2017, Hannover, Germany
Neben, M., Zaussinger, F., Schwarzbach, F., Egbers, Ch. (2017): Numerische Simulation der Kavitationsbildung in schnellrotierenden hydrodynamischen Gleitlagern, Kolloquium Fluidenergiemaschinen - FEM 2017, 02. - 03.03.2017
Willeke, T.; Seume, J.R. (2017): Verbessertes Teillastverhalten mehrstufiger Axialverdichter durch gezielte Strömungsbeeinflussung, LiFE 2050 - Tag der Energieforschung 2017, 4 Mai 2017, Leibniz Universität Hannover
Fräger, L.; Brand, C.R.; Seume, J.R. (2016): Robustheit des Delay-and-Sum-Beamformers gegenüber fehlerbehafteten Eingangsgrößen, 42. Jahrestagung für Akustik – DAGA 2016, Aachen
Langer, S; Ring, T.; Hurfar, M.C.; Seume, J.R. (2016): Erfahrung mit der interdisziplinären und standortübergreifenden Vorlesung "Einführung in die Technische Akustik", 42. Jahrestagung für Akustik – DAGA 2016, Aachen
Schwerdt, L.; Siemann, J.; Seume, J.R. (2016): Active Flow Control Implemented in a Multi-Stage High-Speed Axial Compressor, 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung(DMV), Proceedings in Applied Mathematics and Mechanics (PAMM), 07-11 March 2016, Braunschweig
Brand, C.R.; Seume, J.R. (2015): Einfluss unterschiedlicher Datenbearbeitung bei der Schallquellenlokalisierung an Klappen für Windenergieanlagen , 41. Jahrestagung für Akustik – DAGA 2015, Nürnberg
Drechsel, B.; Herbst, F.; Seume, J.R. (2015): Instationäre Validierung von PIV-Messungen in einem skalierten Abgas-Ringdiffusor einer Gasturbine, In: Beckmann, M., Hurtado, A.; Kraftwerkstechnik 2015 - Strategien, Anlagentechnik und Betrieb; SAXONIA Verlag, S. 489-453
Hennecke, C.; Hartmann, U.; von der Haar, H.;Dinkelacker, F.; Seume, J.R. (2015): Correlation of Defects in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases and Numerical Analysis, 64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015, Rostock
Hurfar, M.; Seume, J.R. (2015): Untersuchung des Einflusses von Schutzgittern für Mikrofone in einem Hochgeschwindigkeits-Windkanal, 41. Jahrestagung für Akustik – DAGA 2015, Nürnberg
Kellersmann, A.; Gilge, P.; Seume J.R.; Friedrichs J. (2015): Performance Impact of High Pressure Compressor Blisk Roughness, 64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015, Rostock, Germany
Mumcu, A.; Thouault, N.; Broszat, D.; Seume, J.R. (2015): Experimenteller Aufbau zu Untersuchungen der Modenausbreitung in Niederdruckturbinengittern, 41. Jahrestagung für Akustik – DAGA 2015, Nürnberg
Willeke, S.; Meinzer, C.; Panning-von Scheidt, L.; Schönenborn, H. (2015): Mistuning aerodynamisch und strukturmechanisch gekoppelter Beschaufelungen, FVV Zwischenbericht, Heft R 573 (Herbsttagung 2015), Würzburg
Brand, C.R.; Seume, J.R. (2014): Quantifizierung der globalen Schallemission eines skalierten Flügelprofils mit Hinterkantenklappe für Windenergieanlagen, 40. Jahrestagung für Akustik – DAGA 2014, Oldenburg
Freund, O.; Meinzer, C.E.; Seume J.R. (2014): Validierung und Einsatz eines optischen Tip-Timing Systems in einem Axialverdichter, Zustandsbewertung in der Energie- und Anlagentechnik, Fachtagung TÜV Süd, 19.-20. March 2014, Munich
Koupeny, J.; Bresemann, D.; Meinzer, C.; Mertens, A.; Ponick, B.; Seume, J.R. (2014): Universelles Werkzeug zur Steigerung der Energieeffizienz von technischen Prozessen am Beispiel eines Prozesskühlsystems mit elektrischer Antriebstechnik, SIMPEP Kongress, 17-18 September 2014, Koblenz/Lahnstein
Kwitschinski, T.; Gustav, D.; Gerkens, P.; Seume, J. (2014): Einfluss der Filletgeometrie auf die Ausbildung von Sekundärströmungen in einer Turbinenstufe, Beckmann, M.; Hurtado, A. (Hrsg.): Kraftwerkstechnik 2014 - Strategien, Anlagentechnik und Betrieb.
Meinzer, C.E.; Schmitt, S.; Seume, J.R. (2014): Akustische Anregung von Schaufelschwingungen, 14. Statusseminar der AG Turbo, Verbundprojekt für das emissionsarme Kraftwerk „AG Turbo 2020“, 8-9 Dezember 2014, DLR, Köln-Porz
Meinzer, C.E.; Wolff, T.; Hauptmann, T.; Seume, J.R. (2014): Aeroelastic Analysis of Turbomachinery using TRACE, TRACE User Conference, 24-27 March 2014, Cologne
Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Beurteilung von Störungen in Flugtriebwerken, 2. Kolloquium des SFB 871 - Zukünftige Regenerationstechnologien, 12. November 2013, Hannover
Bartelt, M.; Witthaus, S.; Seume, J.R. (2013): Experimentelle Untersuchungen an einem Aeroakustik-Windkanal für Turbomaschinenanwendungen - Eine Übersicht über aktuelle Entwicklungen, DGLR-/DEGA-Workshop "Simulation und Validierung bei Strömungsschallproblemen in der Luftfahrt, Fahrzeug- und Anlagentechnik", 20-21 November 2013, München
Drechsel, B.; Hohenstein, S.; Aschenbruck, J.; Seume, J.R. (2013): Einfluss betriebs- und regenerationsbedingter Varianzen von Turbinenschaufeln, VGB-Fachtagung “Gasturbinen und Gasturbinenbetrieb 2013”, 11 June 2013, Friedrichshafen
Drechsel, B.; Seume, J.R. (2013): Verbesserung des Druckrückgewinns in Axialdiffusoren für GuD-Kraftwerke, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 445-459, ISBN: 978-3-944310-04-6.
Ernst, B.; Seume J.R. (2013): Investigation of Structural Uncertainty of Wind Turbine Rotor Blades, 6. Dresdner Probabilistik-Workshop, 10-11 Oktober 2013, Technische Universität Dresden
Hohenstein, S.; Gilge, P.; Raulf, C.; Seume, J.R. (2013): Einfluss lokaler Rauheiten auf die aerodynamischen Verluste von Turbinenschaufeln, Deutscher Luft- und Raumfahrtkongress 2013, 10-12 September, Stuttgart
Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J.R. (2013): Steigerung der Energieeffizienz durch intelligente Nutzung elektrischer Antriebssysteme, ETG Kongress, 5-6 November 2013, Berlin
Seume, J.R.; Teichel, S.H.; Burnazzi, M.; Schwerter, M.; Behr, C.; Rudenko, A.; Schmitz, A.; Dörbaum, M.; Atalayer, C. (2013): SFB 880 – Efficient High Lift, 62. Deutscher Luft- und Raumfahrtkongress 2013, 10-12 September, Stuttgart, Deutschland, DLRK2013_301273
Tesch, M.; Aschenbruck, J.; Hohenstein, S.; Schmidt, A.; Seume, J.R. (2013): Technik entdecken - Schüler-Lehrer-Tag an der Universität Hannover, Gesellschaft für Didaktik der Chemie und Physik Jahrestagung in Hannover 2012
Eilts, P.; Gehrke, S.; Kaack, M.; Sourell, R.; Wolf, R.; Munack, A.; Pabst, C.; Krahl, J.; Montenegro, R.E.; Meier, M.A.R.; Brümmer, A.; Hütker, J.; Nikolov, A.; Seume, J.R.; Kunte, H. (2012): Motorenentwicklung im Nutzfahrzeug, 1. VDI-Konferenz, 27-28 September 2012, Stuttgart
Seume, J.R.; Müller-Kirchenbauer, J.; Kurrat, M.; Biester, M. H.-O; Munzel, B.; Derlien, H. (2012): Power-to-Gas-to-Power - Schnittstellendynamik bei der Einspeisung und Rückwandlung elektrolytisch erzeugten Wasserstoffs in das Gasnetz, Kraftwerkstechnisches Kolloquium, 23–24 Oktober 2012, Dresden
Bartelt, M.; Seume, J.R. (2011): Auslegung und Optimierung eines Aeroakustik-Kanals für Turbomaschinenanwendungen unter Verwendung numerischer Methoden, Deutscher Luft- und Raumfahrtkongress 2011, 27-29 September, Bremen
Lietmeyer, C.; Hohenstein, S.; Naschilevski, S.; Seume, J.R. (2010): Einfluss von Riblet-Strukturen auf den Wirkungsgrad eines Hochgeschwindigkeits-Axialverdichters, Deutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg
von Seggern, H.G.; Seume, J.R. (2010): Verlaufskontrolle von Lungenkrankheiten anhand exhalierter Aerosole, 28. DECHEMA-Jahrestagung der Biotechnologen, 23 September 2010, Aachen
Vorreiter, A.; Seume, J.R. (2010): Numerische Untersuchungen zum Wirkungsgrad von aktiver Strömungsbeeinflussung im Stator eines mehrstufigen Axialverdichters, Deutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg
Gomez, A.; Seume, J.R. (2009): Aerodynamische Turmbelastung (Poster-Beitrag), Offshore-Windenergie-Kolloquium – ForWind., 4. June 2009, Hanover
Vorreiter, A.; Ziesenis, B.; Seume, J.R. (2007): Studie TC-Lagerreibung Vorhaben Nr. 908 – Untersuchung und empirische Modellbildung des Reibmomentes von Turboladerlagerungen, FVV Informationstagung Motoren/Turbomaschinen, Heft R 537 (2007), Frankfurt
Ziesenis, B.; Gündogdu, Y.; Seume, J.R. (2007): Vorstudie Einlaufgeometrie Vorhaben Nr. M1502 – Untersuchung des Einflusses der Verdichter-Einlaufgeometrie auf das Betriebsverhalten von Abgasturboladern, FVV Informationstagung Motoren/Turbomaschinen, Heft R 537 (2007), Frankfurt
Seume, J.R. (2006): Brechungsindex und Dichtebestimmung mit der BOS-Methode (Backround Oriented Schlieren Method), Measurement, 15-16 February 2006, Göttingen
Seume, J.R. (2006): Aktuelle Entwicklungstendenzen stationärer Gasturbinen aus Sicht der Forschung, 5. VDI Fachtagung: Stationäre Gasturbinen im Fokus von Wirtschaftlichkeit, Sicherheit und Klimaschutz, 21-22 November 2006, Leverkusen
Sieker, O.; Kluß, D.; Becker, S.; Wiedermann, A. (2006): Hocheffiziente Turbinendiffusoren, 10. Statusseminar der AG Turbo, Verbundsprojekt CO2-Reduktion durch Effizienz „COOREFF-T“, 6-7 December 2006, DLR, Köln-Porz
Keppel, W.; Niehuis, R.; Seume, J.R. Weyer, H. (2004): Forschungskonzepte für Turbinenschaufeln, VDI-Tagung: Effizienzsteigerung von konventionellen und nuklearen Kraftwerken, 18-19 November 2004, Köln, VDI-Bericht 1862, S. 161-175
Abdelhamid, S.; Berndt, R.; Grigoriadis, P.; Hagelstein, D.; Nickel, J.; Pucher, H.; Seume, J.R. (2003): Erweiterte Darstellung und Extrapolation von Turbolader-Kennfeldern als Randbedingung der Motorprozesssimulation, 5. Internationales Stuttgarter Symposium zu Kraftfahrwesen und Verbrennungsmotoren, 18-20 February 2003, Stuttgart
Fleige, H.-U.; Pietrasch, R.Z.; Rieß, W.; Seume, J.R. (2003): Optimierung von Turbinenaustrittsdiffusoren zur Wirkungsgradverbesserung, VDI-Tagung: Retrofit, 3-4 Juni 2003, Hannover, VDI-Bericht 1769
Levy, Y.; Pismenny, J.; Reissner, A.; Riess, W. (2001): Relationship between Frequencies of Pressure Oscillations and Rotor Speed under Established Rotating Stall in Axial Compressors, Turbokompressoren im industriellen Einsatz, Tagung Duisburg, 18-19 September, Duisburg, VDI-Bericht 1640
Hagelstein, D.; Beyer, B.; Lübke, H.-P.; Hasemann. H.; Baar, R.; Rautenberg M. (2000): Thermodynamik und Energietransport bei Abgasturboladern unterschiedlicher Regelungen, Haus der Technik Tagung: Aufladung von Verbrennungsmotoren, 30-31 March 2000, Berlin, Nr. E-H030-03-020-0
Runkel J.; Stegemann, D.; Fiedler, J.; Heidemann, P.; Blaser, R.; Schmidt, F.; Trobitz, M.; Hirsch, L.; Thoma, K. (2000): Schwingungs- und Körperschallmessungen in Siedewasserreaktoren bei Leistungsbetrieb, Jahrestagung Kerntechnik, 23-25 Mai 2000, Bonn
Published Report
Kluge, T.; Wein, L.; Oettinger, M.; Seume, J.R. (2020): Abschlussbericht: AG Turbo COOREflex-turbo Vorhaben 4.2.5a: Optimaler Deckbandrückschnitt bei Turbinenlaufschaufeln, Leibniz Universität Hannover, Garbsen
Willers, O.; Zeh, C.; Schwarze, H.; Seume, J.R. (2020): Thermally influenced TC Bearing Friction, Final Report H1219-V1238, Forschungsvereinigung Verbrennungskraftmaschinen e.V., Frankfurt a. M.
Schwarzbach, F.; Herbst, F.; Seume J. R.; (2019): Skalenauflösende Simulationen zur Untersuchung des aeroelastischen Verhaltens von Turbomaschinen, Forschung im HLRN-Verbund 2019, Herausgeber: Konrad-Zuse-Zentrum für Informationstechnik Berlin, Berlin
Willers, O.; Seume, J.R. (2018): ORC-Turbinen-Generatoreinheit für Lkw, Stahl-Innovationspreis 2018, Herausgeber: Wirtschaftsvereinigung Stahl, Düsseldorf, S. 38-39
Kauth, F.; Narjes, G.; Müller, J.; Ponick, B.; Mertens, A.; Seume, J.R. (2017): Compact Electrical Compressors for Active Flow Control in Autonomous High-Lift Systems, "SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft: Biennial Report", Rolf Radespiel, Richard Semaan, TU Braunschweig, Braunschweig
Kunte, H.; Willers, O.; Peters, M.; Seume, J.R. (2017): Expansionsmaschine (CO2-Programm), FVV-Abschlussbericht, H 1139 (2017), Frankfurt
Denkena, B. (2015): vStruct-virtuelle Optimierung der Fertigung lokal angepasster Riblet-Strukturen auf einer dreidimensionalen Turbomaschinenbeschaufelung , Abschlußbericht 2015, Hrsg.: Berend Denkena, PZH Verlag, Seite 339-372, Pro³gression diligent production, ISBN 978-3-95900-030-7
Seume, J.R.; Drechsel, B. (2015): Einfluss von Stützrippen auf die Sekundärströmung in Turbinendiffusoren, AG Turbo Abschlussbericht
Teichel, S.H.; Dörbaum, M.; Ponick, B.; Seume, J.R. (2015): Compact Dynamic Compressors for Active Flow Control in High-Lift Configurations, "SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft: Biennial Report", Rolf Radespiel, Richard Semaan, TU Braunschweig, Braunschweig
Rätz, H.; kleine Sextro, T.; Lübbert, N.; Seume, J.R. (2014): Modellierung der Wärmeströme in der Welle eines Turboladers basierend auf CHT-Simulationen, FVV Abschlussbericht, Heft R 571 (2014), Frankfurt
Teichel, S.H.; Seume, J.R.; Dörbaum, M.; Ponick, B. (2013): Compact Dynamic Compressors for Active Flow Control in Autonomous High Lift Configurations, SFB 880 - Fundamentals of High Lift for Future Commercial Aircraft Biennial Report. Braunschweig: TU Braunschweig - Campus Forschungsflughafen
Herbst, F.; Eilts, P.; Porzig, D.; Schwarze, H.; kleine Sextro, T; Seume, J.R. (2012): Grundlegende Technologien zur Hochaufladung von Fahrzeugmotoren, NTH-Abschlussbericht (BU 2.2.4)
Seume, J.R.; Kuschel, M. (2011): Sekundärströmungen in Turbinendiffusoren, Abschlussbericht, Forschungsvorhaben 0327717B, Vorhaben-Nr.: 4.2.9 der AG Turbo COORETEC-turbo, December 2011
Seume, J.R.; Sieker, O. (2008): Hocheffiziente Turbinendiffusoren – Teil A: Experimentelle Untersuchungen, Abschlussbericht, Forschungsvorhaben 0327720E, Vorhaben-Nr.: 4.2.8.A der AG Turbo COOREFF-T, April 2008, Verbundprojekt CO2-Reduktion durch Effizienz
Müller, D.; Grigoriadis, P. (2007): Dynamische Pumpgrenze Vorhaben Nr. 845 – Dynamisches Verhalten von Turboladern nahe der Pumpgrenze, FVV Abschlussbericht, Heft 833 (2007), Frankfurt
Seume, J.R.; Goldhahn, E.; Steglich, T.; van den Braembussche, R.A.; Prinsier, J.; Alsalihi, Z.; Verstraete, T. (2007): Vorleitradoptimierung II Vorhaben Nr. 846 – Strömungsvorgänge zwischen Vorleitapparat und Laufrad eines Radialverdichters und ihre gegenseitige Beeinflussung, FVV Abschlussbericht, Heft 838 (2007), Frankfurt
Braun, M. (2005): Vorwärtsgepfeilte AV-Beschaufelung, Vorhaben Nr. 800 – Experimentelle Untersuchung einer vorwärts gepfeilten Beschaufelung in einem mehrstufigen Axialverdichter, FVV Abschlussbericht, Heft 808 (2005), Frankfurt
Steglich, T; Seume, J.R.; Shaaban, S. (2005): Radialverdichterkennfeld Vorhaben Nr. 823 – Erstellung einer Kennfeldberechnungsmethode zur Inter- und Extrapolation des gemessenen Radialverdichterkennfeldes anhand vorhandener FVV-Ergebnisse, FVV Abschlussbericht, Heft 813, Heft R 529 (2005), Frankfurt, S. 119-138
Seume, J.R. (2004): Beitrag der AG Turbo zur Wirkungssteigerung von Gasturbinen, Beitrag in: „Stationäre Gasturbinen: Fortschritte und Betriebserfahrungen“, Hrsg.: VDI-Gesellschaft Energietechnik, Düsseldorf: VDI-Verlag 2004, VDI-Bericht Nr. 1857
Seume, J.R. (2004): Forschungskonzepte für Turbinenschaufeln, Beitrag in: Keppel, W., Niehuis, R., Weyer, H.: „Effizienzsteigerung von konventionellen und nuklearen Kraftwerken“, Hrsg.: VDI-Gesellschaft Energietechnik, Düsseldorf: VDI-Verlag 2004, VDI-Bericht Nr. 1862, S. 161/175
Steglich, T.; Kitzinger, J.; Seume, J.R.; van den Braembussche, R.; Prinsier, J. (2003): Strömungsvorgänge in spiralförmigen Sammelräumen für Radialverdichterstufen, FVV Abschlussbericht, Heft 773 (2003), Frankfurt
Seume, J.R.; Pucher, H.; Bohn, D. (2002): TC-Gesamtkennfeldbestimmung / TC-Wärmeströme – Erweiterte Darstellung und Extrapolation von Turbolader-Kennfeldern als Randbedingung der Motorprozesssimulation / Modellierung des Wärmeflusses im und am System Turbolader., FVV Abschlussbericht, Heft R 517 (2002), Frankfurt, S. 39-62
Fischer, A.; Seume, J.R. (2001): Bow-Beschaufelung Vorhaben Nr. 737 – Numerische und experimentelle Untersuchung von Bow-Statoren in einem hochbelasteten Axialverdichter, FVV Abschlussbericht 2001, Frankfurt
Hagelstein, D.; Prinsier, J.; Van den Braembussche, R.A. (2001): Vorleitradoptimierung I Vorhaben Nr. 705 – Vorleitrad - Laufrad Strömungsoptimierung und Interaktion, FVV Abschlussbericht, Heft 705 (2001), Frankfurt
Gehring, S.; Rieß, W. (2000): 2d-FE-Verfahren für die Kennfeldberechnung von vielstufigen Turbinen mit unter- und überkritischen Stufendruckverhältnissen mit variabler Kühlluftzufuhr, Abschlußbericht zum Vorhaben 1.312 im Teilverbund-Projekt Turbotech der Arbeitsgemeinschaft Hochtemperatur-Gasturbine
Ayder, E.; Hillewaert, K.; Van den Braembussche, R.; Zeoli, D.; Seidel, U.; Hagelstein, D. (1998): Spiralströmungen I Vorhaben 606 – Strömungsvorgänge in spiralförmigen Sammelräumen für Radialverdichter, FVV Abschlussbericht, Heft 606 (1998), Frankfurt
Gehring, S.; Rieß, W. (1995): Modelle zur Bestimmung der Stabilitätsgrenze von Axialverdichtern, VDI Berichte Nr. 1208, S. 221-235
Janssen, M.; Seume, J.R.; Zimmermann, H. (1994): Strömungsanalyse der Einzelstufen einer mehrstufigen Turbine und eines mehrstufigen Verdichters einer Gasturbine zur Verbesserung der Strömungsrechenverfahren, Abschlussbericht zum Vorhaben HTGT-Turbotech 1.1.1.1 / 1.1.1.3., Siemens AG, Bereich Energieerzeugung (KWU)
Jetter, Ch.; Riess, W. (1994): Strömungstechnische Eigenschaften von Turbinenschaufelprofilen unterschiedlicher Fertigungsqualitäten, VDI Berichte Nr. 1109, S. 241-259
Bigalk, J.; Riess, W. (1992): Experimentelle und numerische Untersuchung der Seitenwand-Grenzschicht in einer Axialverdichterstufe, VDI Berichte Nr. 947, S. 19-40
Seume, J.R.; Friedman, G.; Simon, T.W. (1992): Fluid Mechanics Experiments in Oscillatory Flow, NASA Contractor Report 189127, March 1992
Rautenberg, M., Haupt, U., Hasemann, H. (1990): Schwingungserregung bei Radialverdichterrädern – Dimensionierungskriterien bei der Festigkeitsauslegung, FVV Abschlussbericht zum Vorhaben Nr. 396, Heft Nr. 456 (1990), Frankfurt
Dissertations
Bittner, S. (2020): Experimentelle Validierung numerischer Optimierungen des Schaufelpfades einer Hochdruck-Dampfturbine, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvii, 109, ix S.
Hartmann, U. (2020): Auflösung und Zuordnung von Defekten im Heißgaspfad von Flugtriebwerken anhand der Dichteverteilung im Abgasstrahl, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xx, 116 S., Anh.
Hauptmann, T. (2020): Einfluss regenerationsbedingter Varianzen der Schaufelgeometrie auf erzwungene Schwingungen in einer mehrstufigen Turbine, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvi, 141 S.
Meinzer, C. (2020): Quantifizierung der aerodynamischen Dämpfung, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvii, 152 S.
Wein, L. (2020): Large-Eddy-Simulation von Deckbandlabyrinthdichtungen, Large-Eddy-Simulation von Deckbandlabyrinthdichtungen. Hannover : Gottfried Wilhelm Leibniz Universität, Diss., 2020, xviii, 167 S.
Kunte, H. (2019): Kennfelderweiterung einer supersonischen axialen Impulsturbine durch variable Teilbeaufschlagung, München : Verlag Dr. Hut, 2019, VIII, 151 S.
Cengiz, K. (2018): Use of Detached Eddy Simulation for Aerodynamics and Aeroacoustics of Blade Sections, Middle East Technical University, Graduate School of Natural and Applied Sciences, Ankara, Turkey
Flores, D. (2018): Influence of labyrinth seals in cavities on the flow of an axial compressor, Hannover: Institut für Turbomaschinen und Fluid-Dynamik, 2018 (Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik ; 13), xxiv, 159 S.
Teichel, S. H. (2018): Optimized design of mixed flow compressors for an active high-lift system, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 12/2018
Brand, C.R. (2017): Zur Schallentstehung an den Seitenkanten von Wölbklappen für Windenergieanlagen, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 11/2017
Biester, M. (2016): Ausmischverluste und instationärer Arbeitsumsatz in Turbinen, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 10/2016
Laguna, J.D. (2016): On the Sensitivity of the Radial Mode Analysis (RMA) for the Experimental Evaluation of Sound Propagation in a Low-Pressure Turbine, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 9/2016
Lin, S.Y. (2016): Coherent Structures and Rotational Effects on the Flow over Spinners of Horizontal Axis Wind Turbine, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 8/2016
Bartelt, M. (2015): Ein Beitrag zum Ausbreitungsverhalten modaler Schallfelder in Niederdruckturbinen, Leibniz Universität Hannover, Berichte aus Turbomaschinen und Fluid-Dynamik, Band 7/2015
Czapka, T. (2015): Erweiterung des Verdichterkennfeldes eines Abgasturboladers für verbrauchsoptimierte Verbrennungsmotoren, AutoUni – Schriftenreihe Band 77, Logos Verlag Berlin
Freund, O. (2015): Akustische Anregung von Schaufelschwingungen in Turbomaschinen, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 5/2014
Adamczuk, R. (2014): Zustandsbeurteilung eines Triebwerks durch die Analyse des Abgasstrahls, Dissertation, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 6/2014
Hohenstein, S. (2014): Einfluss komplexer Oberflächenstrukturen auf das aerodynamische Verlustverhalten von Turbinenbeschaufelungen, Dissertation, Leibniz Universität Hannover, Berichte aus Turbomaschinen und Fluid-Dynamik, Band 4/2014
Kuschel, M. (2014): Einfluss von Sekundärströmungen auf den Druckrückgewinn in Axialdiffusoren, Dissertation, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 3/2014
Peter, J. (2014): Numerische Untersuchung und Optimierung des Laufrades einer Pkw-Abgasturboladerturbine, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 05/2014
Schnückel, C. (2014): Numerische Simulation und Optimierung der Anströmung einer Abgasturboladerturbine, AutoUni – Schriftenreihe Band 59, Logos Verlag Berlin
Herbst, F. (2013): Modellierung des Einflusses von Ausblasungen auf die Grenzschichttransition in hochbelasteten Niederdruckturbinen, Dissertation, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 2/2013
Lietmeyer, C. (2013): Berechnungsmodell zur Widerstandsbeeinflussung nicht-idealer Riblets auf Verdichterschaufeln, Dissertation, Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 1/2013
Alhaj, O. (2012): Optical Investigation of Profile Loss in a Linear Turbine Cascade, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Kleppa, O. (2012): Blow-By in Abgasturboladern, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Natkaniec, C. (2012): Sekundärströmungen in Turboladerturbinen mit variabler Turbinengeometrie, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Vorreiter, A. (2012): Aktive Strömungsbeeinflussung im Stator eines mehrstufigen Axialverdichters, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Binner, M. (2011): Experimentelle Untersuchung von Teil- und Schwachlastzuständen in Hochdruckdampfturbinen, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Frese, F. (2011): Aerodynamische und strukturmechanische Bewertung des Flutenteilers an Radialturbinen von Turboladern, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Haslbeck, K. (2011): Entstehung exhalierter Tröpfchen in den terminalen Atemwegen, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München, ISBN: 978-3-86853-924-0
Kammeyer, J. (2011): Abgasturbolader mit Deckband zur Verringerung der turbinenseitigen Spaltverluste, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Oehlert, K. (2011): Zur Applikation von Riblets auf Verdichterschaufeln, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Opilat, V. (2011): Swirl and Blade Wakes in the Interaction between Gas Turbines and Exhaust Diffusers Investigated by Endoscopic Particle Image Velocimetry, Dissertation, Leibniz Universität Hannover
Gòmez Gonzàlez, A. (2010): Aerodynamic and Aeroelastic Rotor-Tower Interaction in Horizontal Axis Wind Turbines , Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Imetovski, E. (2010): Anwendung der Infinite-Tube-Technique zur instationären Druckmessung in der Radialturbine eines Abgasturboladers, Dissertation, Leibniz Universität Hannover, Cuvillier Verlag, Göttingen
Mohseni, A. (2010): Development of Endoscopic Stereoscopic PIV for Investigating the IGV-Impeller Interaction in a Centrifugal Compressor, Dissertation, Leibniz Universität Hannover, Südwestdeutscher Verlag für Hochschulschriften
Sieker, O. (2010): Einfluss von Drall und Nachlaufdellen auf Strömung und Druckrückgewinn in axialen Turbinenaustrittsdiffusoren, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Goldhahn, E. (2009): Weiterentwicklung der Hintergrundschlierenmethode zu einem quantitativen Verfahren der Vermessung von Dichtefeldern, Dissertation, Leibniz Universität Hannover
Gündogdu, Y. (2009): Aktive Strömungsbeeinflussung unter Nutzung des Coanda-Effekts in einem Hochgeschwindigkeits-Axialverdichter, Dissertation, Leibniz Universität Hannover
Barchewitz, L.P. (2008): In-Flight Air Supply System for PEM Fuel Cells, Dissertation, Leibniz Universität Hannover
Braun, M. (2008): Vorwärtspfeilung in einem mehrstufigen hochbelasteten Axialverdichter, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Fischer, K. (2008): Instationäres Betriebsverhalten und thermomechanische Beanspruchung tubularer Festoxidbrennstoffzellen, Dissertation, Leibniz Universität Hannover
Griebel, A. (2008): Instationäre Untersuchungsmethoden der saugseitigen Statorgrenzschicht in einem Niedergeschwindigkeitsaxialverdichter, Dissertation, Leibniz Universität Hannover
Hellmich, B. (2008): Acoustic Resonance in a High-Speed Axial Compressor, Dissertation, Leibniz Universität Hannover
Herzog, N. (2008): Numerische Untersuchung von Schwachlastströmungen in mehrstufigen Axialturbinen, Dissertation, Leibniz Universität Hannover, Universitätsbibliothek u. Technische Informationsbibliothek
Kanzer, S. (2008): Strömungs- und Verbrennungsdynamik eines drallstabilisierten Gasturbinenbrenners, Dissertation, Leibniz Universität Hannover, Cuvillier Verlag, Göttingen
Müller, D. (2008): Einfluss der Anordnung und des Betriebs auf die Pumpgrenze von Abgasturboladern, Dissertation, Leibniz Universität Hannover
Reissner, A. (2008): Stabilitätsverbessernde Maßnahmen in Axialverdichtern, Dissertation, Leibniz Universität Hannover
Schreyer, B. (2008): Verlustverhalten fräsrauer Turbinen- und Verdichtergitter, Dissertation, Leibniz Universität Hannover
Steglich, T. (2007): Experimentelle Untersuchungen zum Verbesserungspotential einer Radialverdichterstufe mit interner Spirale, Dissertation, Leibniz Universität Hannover
Kang, G. (2006): Strömungsmechanische Untersuchungen in einer Axialturbine im Ventilations- und Leerlaufbetrieb, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Moreno, L. (2006): Numerische Untersuchung des Clocking-Effekts auf die Hinterkantenausblasung an einer zweistufigen Axialturbine, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 483, Düsseldorf: VDI-Verlag
Bubolz, T. (2005): Untersuchungen von randzonenkorrigierten Axialverdichterbeschaufelungen mit Strömungs-Meßsonden, Dissertation, Leibniz Universität Hannover, Cuvillier Verlag, Göttingen
Fischer, A. (2004): Untersuchungen hochbelasteter Bow-Statoren in einem mehrstufigen Axialverdichter, Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
Shaaban, S. (2004): Experimental Investigation and Extended Simulation of Turbocharger Non-Adiabatic Performance, Dissertation, Leibniz Universität Hannover
Klinge, F. (2003): Vermessung von Wirbeln mit der Hintergrundschlieren-Methode: Untersuchung der räumlichen Position und Stärke des kompressiblen Tragflächenspitzenwirbels des Außenflügels eines Transportflugzeuges mit einer stereoskopischen Hintergrundschlieren-Methode und der Stereo Particle Image Velocimetry, Dissertation, Leibniz Universität Hannover
Shieh, T.-H. (2003): Untersuchung von Axialturbinen-Beschaufelungen mit dreidimensionalen Gestaltungselementen, Dissertation, Leibniz Universität Hannover
Fiedler, J. (2002): Schwingungsüberwachung von Primärkreiskomponenten in Kernkraftwerken, Dissertation, Leibniz Universität Hannover, Universitätsbibliothek u. Technische Informationsbibliothek
Fleige, H.-U. (2002): Experimentelle und numerische Untersuchungen am Model eines Turbinenaustrittsdiffusors, Fortschritt-Berichte VDI: Reihe 7, Nr. 442, Düsseldorf: VDI-Verlag
Tappen, M. (2002): Beitrag zur Optimierung der Kohlenstaubfeuerung im Kraftwerk Wilhelmshaven mit Hilfe neuartiger Kohlenstaubmengenmessung, Fortschritt-Berichte VDI: Reihe 6, Nr. 489, Düsseldorf: VDI-Verlag
Beyer, B. (2001): Beitrag zur Auslegung von Kühllüftern für Nutzfahrzeuge, Dissertation, Leibniz Universität Hannover, Universitätsbibliothek u. Technische Informationsbibliothek
Hagelstein, D. (2001): Experimentelle Untersuchungen an einer Radialverdichterstufe mit verschiedenen Vorleitgittern variabler Geometrie, Dissertation, Leibniz Universität Hannover, Universitätsbibliothek u. Technische Informationsbibliothek
Harbecke, U. (2001): Aerodynamische Wirkung fertigungsbedingter technischer Rauheiten und Geometriefehler an gefrästen Turbinenschaufeln, Fortschritt-Berichte VDI: Reihe 7, Nr. 419, Düsseldorf: VDI-Verlag
Heidemann, P. (2001): Diagnoseverfahren zur Schwingungs- und Körperschallüberwachung in Siedewasserreaktoren, Dissertation, Leibniz Universität Hannover
Bahm. F.U. (2000): Das Axialschubverhalten von einstufigen Kreiselpumpen mit Spiralgehäuse, Dissertation, Leibniz Universität Hannover
Gehring, S. (2000): Verfahren zur Kennfeldberechnung von stark gekühlten Turbinen, Dissertation, Leibniz Universität Hannover, Shaker, Aachen, ISBN: 3-8265-8430-9
Schmidt, D. (2000): Strömungsuntersuchungen in Dampfturbinen-Endstufen im Heiz- und Schwachlastbetrieb, Fortschritt-Berichte VDI: Reihe 7, Nr. 376, Düsseldorf: VDI-Verlag
Sentker, A. (2000): Analyse der instationären turbulenten Strömung in einem Niedergeschwindigkeitsaxialverdichter, Dissertation, Leibniz Universität Hannover, Shaker, Aachen
Walkenhorst, J. (2000): Axialverdichter mit wandkonturierten Leitschaufeln – Prüfstandentwicklung und Strömungsuntersuchung, Fortschritt-Berichte VDI: Reihe 7, Nr. 390, Düsseldorf: VDI-Verlag
Shi, L. (1999): Untersuchung instationärer Strömungsvorgänge in hochbelasteten Radialverdichtern, Dissertation, Leibniz Universität Hannover
Caspar, V. (1998): Zur numerischen Simulation des turbulenten Impuls- und Massenaustausches in zwangsventilierten Räumen, Dissertation, Leibniz Universität Hannover, Shaker, Aachen
Pfitzinger, E.W. (1998): Kennfeldberechnung für Axialverdichter mit systematischer Untersuchung der Verlust- und Umlenkeigenschaften von Schaufelgittern, Fortschritt-Berichte VDI: Reihe 7, Nr. 337, Düsseldorf: VDI-Verlag
Walbaum, M. (1998): Entstehungsmechanismen und Erscheinungsformen des Rotating Stall in einem sechsstufigen Axialverdichter mit verstellbaren Leitschaufeln, Fortschritt-Berichte VDI: Reihe 7, Nr. 352, Düsseldorf: VDI-Verlag
Engelkind, S. (1997): Untersuchung der Druckwellenmaschine für Kaltluftanlagen, Dissertation, Leibniz Universität Hannover
Hasemann, H. (1997): Untersuchung der Festigkeit und des Schwingverhaltens hochbelasteter Radialverdichterlaufräder, Dissertation, Leibniz Universität Hannover
Jetter, Ch. (1997): Strömungstechnische Qualitätskriterien von spanabhebend gefertigten Turbinenschaufelprofilen, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 314, Düsseldorf: VDI-Verlag
Jiang, Z. (1997): Energieumsetzung und Schaufelschwingungen bei verschiedenen Geometrien des Nachleitgitters im Radialverdichter, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 318, Düsseldorf: VDI-Verlag
Kassens, I. (1997): Energieumwandlung im Vorleitgitter eines Radialverdichters, Dissertation, Leibniz Universität Hannover
Baar, R. (1996): Untersuchungen zu Beschleunigungsvorgängen von Partikeln in Düsen und Strahlen, Dissertation, Leibniz Universität Hannover
Burhorn, D. (1996): Beitrag zur Konzeption eines Abwärme-Compound-Systems an Verbrennungskraftmaschinen in Kraftfahrzeugen, Dissertation, Leibniz Universität Hannover
Heinrich, M. (1996): Zur Simulation der kompressiblen transsonischen Strömung in einem aerodynamischen hochbelasteten Radialverdichter, Dissertation, Leibniz Universität Hannover
Meyer, B. (1996): Entwicklung eines Simulators für Zweikreisstrahltriebwerke für Modelluntersuchungen des Standprobelaufs, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 12 Nr. 277, Düsseldorf: VDI-Verlag
Bayomi, N.N.M. (1995): An Investigation on the Casing Treatment of the Radial Compressors, Cairo, 9. January 1995
Bigalk, J. (1995): Sekundärströmung in der Seitenwandgrenzschicht mehrstufiger Axialverdichter, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 295, Düsseldorf: VDI-Verlag
Huth, T. (1995): Das instationäre Strömungsverhalten des Totwassergebietes eines oszillierenden Kreiszylinders, Dissertation, Leibniz Universität Hannover, Shaker, Aachen
Petrovic, M. (1995): Berechnung der Meridianströmung in mehrstufigen Axialturbinen bei Nenn- und Teillastbetrieb, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 280, Düsseldorf: VDI-Verlag
Seidel, U. (1995): Radialverdichter-Kennfeldregelung mittels Nachleitrad, Dissertation, Leibniz Universität Hannover
Mattiske, B. (1994): Experimentelle Untersuchung einer mehrstufigen Axialverdichterbeschaufelung mit Randzonenkorrektur, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 252, Düsseldorf: VDI-Verlag
Waltke, U. (1994): Berechnung des Meridianströmungsfeldes in Axialverdichtern mit der Methode der Finiten Elemente, Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 261, Düsseldorf: VDI-Verlag, ISBN: 3-18-326107-3
Rüffer, B. (1990): Zur Simulation des Zeitverhaltens einfacher Dampfkraftanlagen, Dissertation, Leibniz Universität Hannover
Malobabic, M. (1989): Das Betriebsverhalten leitschaufel- und bypassgeregelter PKW-Abgasturbolader, Dissertation, Leibniz Universität Hannover
De Buhr, L.; Fleige, H.-U.; Seume, J.R. (2020): Model tests on the control behaviour of a test air supply system in open or closed-loop operation., Int. Conf. on Screw Machines 2018, Dortmund, 18.+19. Sept. 2018