Logo Leibniz Universität Hannover
Institute of Turbomachinery and Fluid Dynamics
Logo Leibniz Universität Hannover
Institute of Turbomachinery and Fluid Dynamics
  • Zielgruppen
  • Suche
 
search
in all authortitledescription
category
year
 

2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1990 1989 1988 1987 1986 1985 all years

Books, Monographs

Seume, J.R.; Gier, J. (2018): R8 Gasturbinen, In: Dubbel Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 25. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg

International Scientific Journal Paper, peer-reviewed

Bode, C.; Friedrichs, J.; Frieling, D.; Herbst, F. (2018): Improved Turbulence Prediction in Turbomachinery Flows and The Effect on Three-Dimensional Boundary Layer Transition, Int. J. Turbomach. Propuls. Power 2018, 3(3), 18

Burgmann, S.; Fischer, T.; Rudersdorf, M.; Roos, A.; Heinzel, A.; Seume, J.R. (2018): Development of a Centrifugal Fan with Increased Part-Load Efficiency for Fuel Cell Applications, Renewable Energy, Volume 116, Part A, February 2018, Pages 815-826

Goldmann, A.; Sauter, W.; Oettinger, M.; Kluge, T.; Schröder, U.; Seume, J.R.; Friedrichs, J.; Dinkelacker, F. (2018): A Study on Electrofuels in Aviation, Energies 2018, Vol. 11(2), 392

Liu, X.; Willeke, T.; Herbst, F.; Yang, J.; Seume, J.R. (2018): A Theory on the Onset of Acoustic Resonance in a Multistage Compressor, J. Turbomach 140(8), 081003 (Jul 24, 2018) (12 pages)

Mimic, D.; Drechsel, B.; Herbst, F. (2018): Correlation Between Pressure Recovery of Highly Loaded Annular Diffusers and Integral Stage Design Parameters, J. Turbomach 140(7), 071002 (May 17, 2018) (11 pages)

Mimic, D.; Jätz, C.; Herbst, F. (2018): Correlation between total pressure losses of highly loaded annular diffusers and integral stage design parameters, Journal of the Global Power and Propulsion Society. 2: 388-401

Mueller, J.-K.; Bensmann, A.; Bensmann, B.; Fischer, T.; Kadyk, T.; Narjes, G.; Kauth, F.; Ponick, B.; Seume, J.; Krewer, U.; Hanke-Rauschenbach, R.; Mertens, A. (2018): Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift Systems, Energies 11(1), 179

Yalçın, Ö.; Cengiz, K.; Özyörük, Y. (2018): High-order detached eddy simulation of unsteady flow around NREL S826 airfoil, Journal of Wind Engineering and Industrial Aerodynamics

International Conference Paper, peer-reviewed

Fischer, T.; kleine Sextro, T.; Seume, J.R.; Flinte, J.; Eilts, P. (2018): Flow range of variable cross-section compressors, Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK

Fischer, T.; Willers, O.W.; Seume, J.R.  (2018): Preliminary Design of a Partial Admission Turbine for the Waste Heat Recovery in Fuel Cells, Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK

Frieling, D.; Griebel, A.; Wein, L.; Seume, J.R.; Herbst, F. (2018): The Influence of Rotor-Wakes on Boundary Layer Development in an Axial Compressor and its Numerical Prediction, Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75631

Hartmann, U.; Seume, J.R. (2018): Automated Condition Evaluation of Hot-Gas Path Components of Jet Engines through Exhaust Jet Analysis, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75384

Hartung, K.; Gilge, P.; Herbst, F. (2018): Towards Immersed Boundary Methods for Complex Roughness Structures in Scale-Resolving Simulations , 32nd European Conference on Modelling and Simulation (ECMS 2018), 22-25 May 2018, Wilhelmshaven, Germany

Hauptmann, T.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of Forced Response Methods in a Multi-Stage Axial Turbine, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75390

Kauth, F.; Narjes, G.; Müller, J.-K.; Mertens, A.; Ponick, B.; Seume, J.R. (2018): Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future Aircraft, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0026

Maehler, L.; Willeke, T.; Seume, J.R. (2018): Numerical Prediction of the Notch Effect of Riblets on Axial Compressor Blades, Proceedings of the Global Power and Propulsion Forum (GPPF), GPPS, 07-09 May 2018, Montreal, Canada, GPPS-2018-0025

Meinzer, C.E.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J.R. (2018): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine Shafts , Proceedings of the Global Power & Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 10-12 January 2018, Zurich, Switzerland, GPPS-2018-0016

Mimic, D.; Jätz, C.; Herbst, F. (2018): Increasing Boundary Layer Stability for Varying Degrees of Diffuser Loading, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0006

Mimic, D.; Jätz, C.; Sauer, P.; Herbst, F. (2018): Total Pressure Loss Reduction in Annular Diffusers, Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS01

Müller-Schindewolffs, C.; Herbst, F.  (2018): The Effect of Turbulent Scales on Low-Pressure Turbine Aerodynamics - Part A: An optimized Turbulent Boundary-Condition, Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Lillestrøm, Norway, GT2018-75162

Schwarzbach F.; Müller-Schindewolffs Ch.; Bode, Ch.; Herbst, F. (2018): Effect of the Turbulent Scales on Low-Pressure Turbine Cascade Aerodynamics Part B: Scale Resolving Simulations, Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75163

Wein, L.; Seume, J.R.; Herbst, F. (2018): Unsteady Flow in a Labyrinth Seal, Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-NA-2018-0036

International Conference Paper, not peer-reviewed

Bittner, S.L.; Keller, C.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of a Forced Response Analysis Using a Time-Linearized Method, AIAA SciTech, 8-12 January 2018, Kissimmee, Florida, AIAA 2018-0461

Bode, C.; Friedrichs, J.; Kellersmann, A.; Herbst, F.; Seume, J.R. (2018): Modeling Transient Aircraft Engine Operation, 13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA

Gilge, P.; Seume, J.; Mulleners, K. (2018): Effect Of Surface Roughness On The Characteristic Length Scales In The Wake Of A Compressor Blade: A POD Analysis, 19th International Symposium on the Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 July 2018, Lisbon, Portugal

Gilge, P.; Seume, J.R.; Mulleners, K. (2018): Analysis of Local Roughness Combinations on the Aerodynamic Properties of a Compressor Blade, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0345

Gößling J.; Ahlefeldt, T.; Mumcu, A.; Hilfer, M. (2018): Experimental validation of unsteady pressure-sensitive paint for acoustic applications, 5th International Conference on Experimental Fluid Mechanics ICEFM, 2018, Munich

Hartmann, U.; Von der Haar, H.; Dinkelacker, F.; Seume, J.R.  (2018): Experimental Defect Detection in a Swirl-Burner Arry Through Exhaust Jet Analysis, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0303

Hauptmann, T.; Seume, J.R. (2018): Blade Vibration Measurements in a Multi-Stage Axial Turbine with Geometric Variations, 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-0952

Henke, M.; Herbst, F.; Rätz, H.; Seume, J.R. (2018): A New Facility for Dynamic Turbomachinery and Wind-Tunnel Testing, XXIV Biannual Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines

Herbst, F.; Müller-Schindewolffs, C.; Schwarzbach, F.; Zieße, M.; Bode, C. (2018): Appropriate Inlet Boundary Conditions for Scale-Resolving Simulations of Turbomachinery Configurations, 13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA

Jätz, C.; Mimic, D.; Herbst, F.; Seume, J.R. (2018): Prediction Performance of the k-ε Elliptic-Blending Turbulence Model in Axial Diffusers, Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS48

Kurth, S.; Hamann, C.; Seume, J.R.; Mulleners, K. (2018): Experimental Investigation of the Influence of Anisotropic Surface Structures on the Boundary Layer Flow, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0585

Mumcu, A; Thouault, N.; Seume, J.R. (2018): Aeroacoustic Testing for Sound Propagation through Turbine Vanes, 2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-1003

Narjes, G.; Kauth, F.; Müller, J.; Mertens, A.; Seume, J.R.; Ponick, B. (2018): High-Speed Permanent Magnet Synchronous Machine for Short-Term Operation in an Electrically Powered High-Lift System, AIAA/IEEE Electric Aircraft Technologies Symposium, AIAA Propulsion and Energy Forum, 9-11 July 2018, Cincinnati, Ohio, USA, AIAA2018-4989

Shimada, T.; Takahashi, Y.; Kuboyama, T.; Moriyoshi, Y.; Fischer, T. (2018): A simple System for Turbocharger Bearing Friction Measurement using Deceleration Method, 23. Aufladetechnische Konferenz, 20.-21. September 2018, Dresden

National Conference Paper, not peer-reviewed

Schwerdt, L.; Seume, J.R. (2018): Implementation and Experimental Verification of Active Flow Control by Jet Injection over a Coanda Surface in a Multi-Stage High-Speed Axial Compressor, 5th International Conference on Experimental Fluid Mechanics ICEFM 2018 Munich, Germany, July 2-4, 2018

Published Report

Willers, O.; Seume, J.R. (2018): ORC-Turbinen-Generatoreinheit für Lkw, Stahl-Innovationspreis 2018, Herausgeber: Wirtschaftsvereinigung Stahl, Düsseldorf, S. 38-39

Dissertations

Cengiz, K. (2018): Use of Detached Eddy Simulation for Aerodynamics and Aeroacoustics of Blade Sections, Middle East Technical University, Graduate School of Natural and Applied Sciences, Ankara, Turkey

Flores, D. (2018): Influence of labyrinth seals in cavities on the flow of an axial compressor, Hannover: Institut für Turbomaschinen und Fluid-Dynamik, 2018 (Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik ; 13), xxiv, 159 S.

Teichel, S. H. (2018): Optimized design of mixed flow compressors for an active high-lift system, Dissertation, Leibniz Universität Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik, Band 12/2018