Logo Leibniz Universität Hannover
Institute of Turbomachinery and Fluid Dynamics
Logo Leibniz Universität Hannover
Institute of Turbomachinery and Fluid Dynamics
  • Zielgruppen
  • Suche
 
search
in all authortitledescription
category
year
 

2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1990 1989 1988 1987 1986 1985 all years

Books, Monographs

Maroldt, N.; Kauth, F.; Seume, J.R.  (2020): Experimental Validation of an Optimized Design Process for Transonic Mixed-Flow Compressors, Contributions to the Final Symposium of the Collaborative Research Center 880, December 17-18, 2019, Braunschweig, Germany

Nachtigal, P.; Mai, H.; Rätz H.; Willers, O.; Seume, J.R. (2020): Auslegung und Regelung eines Pulsationsgenerators für Turbolader-Heißgasprüfstände, Spannungsfeld Fahrzeugantriebe – Gedenkschrift für Prof. Dr.-Ing. Roland Baar, Universitätsverlag der TU Berlin, S. 628

International Scientific Journal Paper, peer-reviewed

Cengiz, K.; Özyörük, Y. (2020): Experiences with two detached eddy simulation approaches through use of a high‐order finite volume solver, International Journal for Numerical Methods in Fluids

Eggers, T.; Kim, H.R.; Bittner, S.; Friedrichs, J.; Seume, J.R. (2020): Aerodynamic and Aeroelastic Effects of Design-Based Geometry Variations on a Low-Pressure Compressor, International Journal of Turbomachinery Propulsion and Power 2020, 5(4), 26

Gilge, P.; Mulleners, K.; Seume, J.R. (2020): Experimental Analysis of Multiscale Vortex Shedding in Turbulent Turbomachine Blade Wakes, AIAA Journal

Lehnhoff, S.; Gómez G.A.; Seume, J.R.  (2020): Full-scale deformation measurements of a wind turbine rotor in comparison with aeroelastic simulations, Wind Energy Science 5, S. 1411-1423

Meinzer, C. E.; Seume, J. R.  (2020): Experimental and Numerical Quantification of the Aerodynamic Damping of a Turbine Blisk, ASME. J. Turbomach

Schwarzbach, F.; Mimic, D.; Herbst, F. (2020): Profile Aerodynamics of an Oscillating Low-Pressure–Turbine Blade, International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), October 2020, Volume 11, Number 4

Seehausen, H.; Gilge, P.; Kellersmann, A.; Friedrichs, J.; Herbst, F. (2020): Numerical Study of Stage Roughness Variations in a HPC , International Journal of Gas Turbine, Propulsion and Power, June 2020, Volume 11, Number 3

Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R (2020): Greater efficiency thanks to smaller gaps – investigations on pressure distribution in the impeller backplane cavity of a high speed centrifugal compressor., Pumps and Compressors for the World Market 2020, VDMA-Verlag, pp. 66-72

International Scientific Journal Paper, not peer-reviewed

Flinte, J.; Eilts, P.; Willers, O.; Seume, J.R. (2020): Extension of the Characteristic Map of a TC Compressor by active Cross-Section Variation, MTZ worldwide, S. 68-72

International Conference Paper, peer-reviewed

Alldieck, R.; Seehausen, H.; Herbst, F.; Seume, J. R. (2020): The Effect of Rough-Wall Boundary Condition on RANS-Based Transition Prediction, Proceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0053

Goeing, J.; Seehausen, H.; Herbst, F.; Bode, C.; Friedrichs J.; Seume, J. R. (2020): Performance simulation of roughness induced module variations of a jet propulsion by using pseudo bond graph theory, Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, GT2020-14456

Goeing, J.; Seehausen, H.; Pak, V.; Lueck, S.; Friedrichs J.; Seume, J. R.  (2020): Influence of combined compressor and turbine deterioration on the overall performance of a jet engine using RANS simulation and pseudo bond graph approach, Proceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0140

Kluge, T.; Lettmann, I.; Oettinger, M.; Wein, L.; Seume, J. R. (2020): Unsteady Flow Phenomena in Turbine Shroud Cavities, Proceedings of the Global Power and Propulsion Society, Global Power and Propulsion Society, GPPS-CH-2020-0064

Lehnhoff, S.; Kidambi S.A.P.; van Dooren, M.F.; Kühn, M.; Seume, J.R. (2020): Full scale rotor blade deformation measurements in comparison with aeroelastic simulations based on measured high-resolution wind fields, The Science of Making Torque from Wind (TORQUE 2020), Journal of Physics: Conference Series, Vol. 1618, Delft, Netherlands

Lohse, S.; Fischer, F.; Koch, R.; Moreau, S.; Seume, J.R. (2020): Aeroacoustic Numerical Investigations of a scaled Compressor Cascade, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0094

Nachtigal, P.; Rätz, H.; Mai, H.; Seume, J.R. (2020): Design and validation of a pulse generator for the pulse shaping of the turbine inlet pressure at the hot-gas test bench, 14th International Conference on Turbochargers and Turbocharging, Institution of Mechanical Engineers, CRC Press, S. 48-61

Oettinger, M.; Henke, M.; Seume, J. R.  (2020): Effect of Diffusor Inhomogeneity on Full-Annulus Axial Turbine Performance, Proceedings of the Global Power and Propulsion Society (GPPS) Chania Conference, 7-9 September, 2020, Chania, Greece. Global Power and Propulsion Society. Paper GPPS-CH-2020-0139

Schmid, M; Seume, J.R. (2020): Design of an aerofoil for small wind turbines with a focus on turbulent inflow conditions, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0066

Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R. (2020): Mehr Effizienz durch kleinere Spalte – Untersuchungen zur Druckverteilung im Radrückraum eines schnelllaufenden Radialverdichters., Pumpen und Kompressoren für den Weltmarkt 2020, VDMA-Verlag, pp. 66-72

Wang, P.; Vera-Morales, M.; La, P.; Zangeneh, M.; Maroldt, N.; Willers, O.; Kauth, F.; Seume, J.R. (2020): Design of a Mixed-Flow Transonic Compressor for Active High-Lift System Using a 3D Inverse Design Methodology, Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, September 21-25, 2020, Virtual, Online, GT2020-15645

Wein, L.; Kluge, T.; Hain, R.; Fuchs, T.; Kähler, C.; Schmierer, R.; Herbst, F.; Seume, J. R. (2020): Validation of RANS Turbulence Models for Labyrinth Seal Flows by Means of Particle Image Velocimetry, Proceedings of ASME Turbo Expo 2020, 21.-25.September, 2020, London, UK, Paper, GT2020-14885

Zeh, C.; Willers, O.; Hagemann, T.; Schwarze, H.; Seume, JR.  (2020): Evaluation of the Rotor Temperature Distribution of an Automotive Turbocharger Under Hot Gas Conditions Including Indirect Experimental Validation, Proceedings of ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, GT2020, June 22-26, 2020, London, England, GT2020-14972

Ziaja, K.; Post, P.; Sembritzky, M.; Schramm, A.; Willers, O.; Kunte, H.; di Mare, F.; Seume, J.R. (2020): Numerical Investigation of a Partially Loaded Supersonic ORC Turbine Stage, Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, GT2020-15645, September 21-15, 2020

Zieße, M.; Wein, L.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R. (2020): Validation of a Synthetic-Eddy Method for Modelling Incoming Wakes in Scale-Resolving Simulations of Turbomachinery Cascades, Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th– 9th September, 2020, GPPS-CH-2020-0017

National Scientific Journal Paper, not peer-reviewed

Kwitschinski, T.; Henke, M.; Bartelt, M. Seume, J.R. (2020): Ventilation im Teil- und Schwachlastbetrieb von HD- und ND-Dampfturbinen, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 379-394

National Conference Paper, not peer-reviewed

Amer, M.; Maroldt, N.; Seume, J.R. (2020): Investigation of Multiharmonic Effects in a Single Stage High Speed Compressor, Deutscher Luft- und Raumfahrtkongress 2019, Darmstadt, Deutsche Gesellschaft für Luft- und Raumfahrt

Kleppa, O.; Henke, M.; Seume, J.R. (2020): Verbesserte Nutzung betriebs-beanspruchter Bauteile durch gezielte Regeneration, Deutscher Luft- und Raumfahrtkongress 2010

Willeke, S.; Schmolke, D.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J.R. (2020): Mistuning mit Aero-Kopplung II - Abschlussbericht No 1269, FVV-Informationstagung Turbomaschinen, Forschungsvereinigung Verbrennungskraftmaschinen, Würzburg

Published Report

Kluge, T.; Wein, L.; Oettinger, M.; Seume, J.R.  (2020): Abschlussbericht: AG Turbo COOREflex-turbo Vorhaben 4.2.5a: Optimaler Deckbandrückschnitt bei Turbinenlaufschaufeln, Leibniz Universität Hannover, Garbsen

Willers, O.; Zeh, C.; Schwarze, H.; Seume, J.R. (2020): Thermally influenced TC Bearing Friction, Final Report H1219-V1238, Forschungsvereinigung Verbrennungskraftmaschinen e.V., Frankfurt a. M.

Dissertations

Bittner, S. (2020): Experimentelle Validierung numerischer Optimierungen des Schaufelpfades einer Hochdruck-Dampfturbine, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvii, 109, ix S.

Hartmann, U. (2020): Auflösung und Zuordnung von Defekten im Heißgaspfad von Flugtriebwerken anhand der Dichteverteilung im Abgasstrahl, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xx, 116 S., Anh.

Hauptmann, T. (2020): Einfluss regenerationsbedingter Varianzen der Schaufelgeometrie auf erzwungene Schwingungen in einer mehrstufigen Turbine, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvi, 141 S.

Meinzer, C. (2020): Quantifizierung der aerodynamischen Dämpfung, Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, xvii, 152 S.

Wein, L. (2020): Large-Eddy-Simulation von Deckbandlabyrinthdichtungen, Large-Eddy-Simulation von Deckbandlabyrinthdichtungen. Hannover : Gottfried Wilhelm Leibniz Universität, Diss., 2020, xviii, 167 S.

De Buhr, L.; Fleige, H.-U.; Seume, J.R. (2020): Model tests on the control behaviour of a test air supply system in open or closed-loop operation., Int. Conf. on Screw Machines 2018, Dortmund, 18.+19. Sept. 2018