-
Lehnhoff, S.; Kidambi S.A.P.; van Dooren, M.F.; Kühn, M.; Seume, J.R.
(2020):
Full scale rotor blade deformation measurements in comparison with aeroelastic simulations based on measured high-resolution wind fields,
The Science of Making Torque from Wind (TORQUE 2020), Journal of Physics: Conference Series, Vol. 1618, Delft, Netherlands
DOI:
10.1088/1742-6596/1618/5/052036
-
Nachtigal, P.; Rätz, H.; Mai, H.; Seume, J.R.
(2020):
Design and validation of a pulse generator for the pulse shaping of the turbine inlet pressure at the hot-gas test bench,
14th International Conference on Turbochargers and Turbocharging, Institution of Mechanical Engineers, CRC Press, S. 48-61
DOI:
10.1201/9781003132172
ISBN:
978-0-367-67645-2
-
Kluge, T.; Lettmann, I.; Oettinger, M.; Wein, L.; Seume, J. R.
(2020):
Unsteady Flow Phenomena in Turbine Shroud Cavities,
Proceedings of the Global Power and Propulsion Society, Global Power and Propulsion Society, GPPS-CH-2020-0064
DOI:
10.33737/gpps20-tc-64
ISSN:
2504-4400
-
Wein, L.; Kluge, T.; Hain, R.; Fuchs, T.; Kähler, C.; Schmierer, R.; Herbst, F.; Seume, J. R.
(2020):
Validation of RANS Turbulence Models for Labyrinth Seal Flows by Means of Particle Image Velocimetry,
Proceedings of ASME Turbo Expo 2020, 21.-25.September, 2020, London, UK, Paper, GT2020-14885
-
Zeh, C.; Willers, O.; Hagemann, T.; Schwarze, H.; Seume, JR.
(2020):
Evaluation of the Rotor Temperature Distribution of an Automotive Turbocharger Under Hot Gas Conditions Including Indirect Experimental Validation,
Proceedings of ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, GT2020, June 22-26, 2020, London, England, GT2020-14972
-
Ziaja, K.; Post, P.; Sembritzky, M.; Schramm, A.; Willers, O.; Kunte, H.; di Mare, F.; Seume, J.R.
(2020):
Numerical Investigation of a Partially Loaded Supersonic ORC Turbine Stage,
Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, GT2020-15645, September 21-15, 2020
-
Oettinger, M.; Henke, M.; Seume, J. R.
(2020):
Effect of Diffusor Inhomogeneity on Full-Annulus Axial Turbine Performance,
Proceedings of the Global Power and Propulsion Society (GPPS) Chania Conference, 7-9 September, 2020, Chania, Greece. Global Power and Propulsion Society. Paper GPPS-CH-2020-0139
DOI:
10.33737/gpps20-tc-139
-
Schmid, M; Seume, J.R.
(2020):
Design of an aerofoil for small wind turbines with a focus on turbulent inflow conditions,
Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0066
DOI:
10.33737/gpps20-tc-66
-
Lohse, S.; Fischer, F.; Koch, R.; Moreau, S.; Seume, J.R.
(2020):
Aeroacoustic Numerical Investigations of a scaled Compressor Cascade,
Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0094
DOI:
10.33737/gpps20-tc-94
-
Zieße, M.; Wein, L.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R.
(2020):
Validation of a Synthetic-Eddy Method for Modelling Incoming Wakes in Scale-Resolving Simulations of Turbomachinery Cascades,
Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th– 9th September, 2020, GPPS-CH-2020-0017
DOI:
10.33737/gpps20-tc-17
-
Wang, P.; Vera-Morales, M.; La, P.; Zangeneh, M.; Maroldt, N.; Willers, O.; Kauth, F.; Seume, J.R.
(2020):
Design of a Mixed-Flow Transonic Compressor for Active High-Lift System Using a 3D Inverse Design Methodology,
Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, September 21-25, 2020, Virtual, Online, GT2020-15645
-
Goeing, J.; Seehausen, H.; Herbst, F.; Bode, C.; Friedrichs J.; Seume, J. R.
(2020):
Performance simulation of roughness induced module variations of a jet propulsion by using pseudo bond graph theory,
Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, GT2020-14456
-
Goeing, J.; Seehausen, H.; Pak, V.; Lueck, S.; Friedrichs J.; Seume, J. R.
(2020):
Influence of combined compressor and turbine deterioration on the overall performance of a jet engine using RANS simulation and pseudo bond graph approach,
Proceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0140
DOI:
10.33737/gpps20-tc-140
-
Alldieck, R.; Seehausen, H.; Herbst, F.; Seume, J. R.
(2020):
The Effect of Rough-Wall Boundary Condition on RANS-Based Transition Prediction,
Proceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0053
DOI:
10.33737/gpps20-tc-53
-
Oettinger, M.; Mimic, D.; Henke, M.; Schmunk, O.; Seume, J. R.
(2019):
Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure Turbine,
Proceedings of Global Power and Propulsion Society (GPPS) Beijing Conference, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0207
DOI:
10.33737/gpps19-bj-207
-
Mimic, D.; Oettinger, M.; Sauer, P.; Herbst, F.
(2019):
Shock–Vortex Interaction in a Transonic Turbine Cascade,
Proceedings of Global Power and Propulsion Society (GPPS) Beijing Conference 2019, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0008
DOI:
10.33737/gpps19-bj-008
-
Mimic, D.; Herbst, F.
(2019):
Influence of Transonic Flow on the Tip-Leakage Vortex in a Turbine Cascade,
Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-082
-
Zieße, M.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R.
(2019):
Enhanced Synthetic-Eddy-Method for Generating Moving Incoming Wakes and Turbulence in Scale-Resolving Simulations,
Proceedings of the International Gas Turbine Congress 2019, 17–22 November 2019, Tokyo, Japan, 66
-
Seehausen, H.; Gilge, P.; Kellersmann, A.; Friedrichs, J.; Herbst, F.
(2019):
Numerical Study of Stage Roughness Variations in a High Pressure Compressor,
Proceedings of the International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan, IGTC-2019-062
ISBN:
978-4-89111-010-9
-
Kauth, F.; Maroldt, N.; Seume, J. R.;
(2019):
Experimental validation of a compact mixed-flow compressor for an active high-lift system ,
IOP Conference Series: Materials Science and Engineering: Volume 643, Number 1
DOI:
https://doi.org/10.1088/1757-899X/643/1/012142
-
Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.
(2019):
Analytical, Experimental and Numerical Investigations on the Impeller Backplane Pressure Distribution of a High-Speed Centrifugal Compressor,
4th International Rotating Equipment Conference (IREC), Wiesbaden
-
Mimic, D.; Oettinger, M.; Jätz, C.; Herbst, F.; Seume, J. R.
(2019):
Thermal End-Wall Contouring,
Proceedings of ASME Turbo Expo 2019, 17–21 June 2019, Phoenix, USA, GT2019-90191
-
Kluge, T.; Wein, L.; Schmierer, R.; Seume, J.R.
(2019):
Sensitivity Analysis, Design, Instrumentation, and Experimental Validation of a Novel Labyrinth Seal Rig.,
Proceedings of the ETC 13, European Turbomachinery Society
-
Oettinger, M.; Henke, M.; Herbst, F.; Seume, J. R.
(2019):
Axial-Gap Size Effect on the Unsteady Flow Field at Midspan in a 1.5-Stage Low-Pressure Turbine,
Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-084
-
De Buhr, L.; Fleige, H.-U.; Seume, J.R.
(2018):
Model tests on the control behaviour of a test air supply system in open or closed-loop operation.,
Int. Conf. on Screw Machines 2018, Dortmund, 18.+19. Sept. 2018
DOI:
https://doi.org/10.1088/1757-899X/425/1/012021
-
Mimic, D.; Jätz, C.; Sauer, P.; Herbst, F.
(2018):
Total Pressure Loss Reduction in Annular Diffusers,
Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS01
-
Mimic, D.; Jätz, C.; Herbst, F.
(2018):
Increasing Boundary Layer Stability for Varying Degrees of Diffuser Loading,
Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0006
DOI:
10.5281/zenodo.1345494
-
Fischer, T.; kleine Sextro, T.; Seume, J.R.; Flinte, J.; Eilts, P.
(2018):
Flow range of variable cross-section compressors,
Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK
-
Maehler, L.; Willeke, T.; Seume, J.R.
(2018):
Numerical Prediction of the Notch Effect of Riblets on Axial Compressor Blades,
Proceedings of the Global Power and Propulsion Forum (GPPF), GPPS, 07-09 May 2018, Montreal, Canada, GPPS-2018-0025
DOI:
10.5281/zenodo.1342723
-
Hartung, K.; Gilge, P.; Herbst, F.
(2018):
Towards Immersed Boundary Methods for Complex Roughness Structures in Scale-Resolving Simulations
,
32nd European Conference on Modelling and Simulation (ECMS 2018), 22-25 May 2018, Wilhelmshaven, Germany
ISBN:
78-0-9932440-6-3
-
Kauth, F.; Narjes, G.; Müller, J.-K.; Mertens, A.; Ponick, B.; Seume, J.R.
(2018):
Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future Aircraft,
Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0026
DOI:
10.5281/zenodo.1342725
-
Hauptmann, T.; Meinzer, C.E.; Seume, J.R.
(2018):
Experimental Validation of Forced Response Methods in a Multi-Stage Axial Turbine,
Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75390
DOI:
10.1115/GT2018-75390
ISBN:
978-0-7918-5115-9
-
Wein, L.; Seume, J.R.; Herbst, F.
(2018):
Unsteady Flow in a Labyrinth Seal,
Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-NA-2018-0036
-
Hartmann, U.; Seume, J.R.
(2018):
Automated Condition Evaluation of Hot-Gas Path Components of Jet Engines through Exhaust Jet Analysis,
Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75384
-
Müller-Schindewolffs, C.; Herbst, F.
(2018):
The Effect of Turbulent Scales on Low-Pressure Turbine Aerodynamics - Part A: An optimized Turbulent Boundary-Condition,
Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Lillestrøm, Norway, GT2018-75162
-
Frieling, D.; Griebel, A.; Wein, L.; Seume, J.R.; Herbst, F.
(2018):
The Influence of Rotor-Wakes on Boundary Layer Development in an Axial Compressor and its Numerical Prediction,
Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75631
-
Fischer, T.; Willers, O.W.; Seume, J.R.
(2018):
Preliminary Design of a Partial Admission Turbine for the Waste Heat Recovery in Fuel Cells,
Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK
-
Schwarzbach F.; Müller-Schindewolffs Ch.; Bode, Ch.; Herbst, F.
(2018):
Effect of the Turbulent Scales on Low-Pressure Turbine Cascade Aerodynamics Part B: Scale Resolving Simulations,
Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75163
-
Meinzer, C.E.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J.R.
(2018):
Influence of Aerodynamic Damping on Torsional Vibrations of Turbine
Shafts
,
Proceedings of the Global Power & Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 10-12 January 2018, Zurich, Switzerland, GPPS-2018-0016
-
Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J.; Berger, R.; Rolfes, R.; Keller, C.; Seume, J.R.
(2017):
Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and Mistuning,
Proceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142, 2017, GPPS-2017-0142
-
Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R.
(2017):
Correcting Turbocharger Performance Measurements for Heat Transfer and Friction,
Proceedings of the ASME Turbo Expo 2017, 26-30 June 2017, Charlotte, NC, USA, GT2017-64283
DOI:
10.1115/GT2017-64283
ISBN:
978-0-7918-5095-4
-
Du, J.; Seume, J.R.
(2017):
Design of Casing Treatment on a Mixed-Flow Compressor,
Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-65226
DOI:
10.1115/GT2017-65226
ISBN:
978-0-7918-5078-7
-
Fischer, T.; Burgmann, S.; Rudersdorf, M.; Seume, J.R.
(2017):
Partially Vaned Diffuser With Variable Cross-Section for Centrifugal Fans,
Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-63965
DOI:
10.1115/GT2017-63965
ISBN:
978-0-7918-5077-0
-
Willers, O.W.; Kunte, H; Seume, J.R.
(2017):
Supersonic Impulse Turbine for Organic Rankine Cycle (ORC) Truck Applications,
26th Aachen Colloquium Automobile and Engine Technology, 9-11 October 2017, Aachen; proceedings pp. 1557-1570, Aachener Kolloquium Fahrzeug- und Motorentechnik GbR, Aachen
ISBN:
978-3-00-054182-7
-
Bode, C.; Friedrichs, J.; Frieling, D.; Herbst, F.
(2017):
Improved Turbulence Prediction in Turbomachinery Flows and The Effect on Three-Dimensional Boundary Layer Transition,
International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ISROMAC 2017, 16-21 December, 2017, Maui, Hawaii
DOI:
10.3390/ijtpp3030018
-
Mimic, D.; Jätz, C.; Herbst, F.
(2017):
Correlation between Total Pressure Losses of Highly Loaded Annular Diffusers and Integral Stage Design Parameters,
Proceedings of Shanghai 2017 Global Power and Propulsion Forum, 30 October – 1 November, 2017, Shanghai, China, GPPS-2017-0063
-
Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J.; Wallaschek, J.
(2017):
Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction,
Proceedings of 12th European Conference on Fluid Dynamics & Thermodynamics, April 3-7, Stockholm, Sweden, ETC2017-242
DOI:
10.29008/ETC2017-242
-
Keller, C.; Kellersmann, A.; Friedrichs, J.; Seume, J.R.
(2017):
Influence of Geometric Imperfections on Aerodynamic and Aeroelastic Behavior of a Compressor Blisk
,
Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-63556
DOI:
10.1115/GT2017-63556
-
Willeke, T.; Hellberg, M.; Seume, J.R.
(2017):
A Numerical Concept Study on Internal Blade Cooling in Axial Compressors,
Proceedings of the ETC 12, 3-7 April 2017, Stockholm, Sweden, ETC2017-106
DOI:
10.29008/ETC2017-106
-
Miro, S.; Broggi, M.; Beer, M.; Willeke, T.; Seume, J.R.
(2017):
Survival Signature Approach for the Reliability Analysis of an Axial Compressor,
27th European Safety and Reliability Conference ESREL, 18 – 22 June 2017, Portorož, Slovenia
-
Mimic, D.; Drechsel, B.; Herbst, F.
(2017):
Correlation between Pressure Recovery of Highly Loaded Annular Diffusers and Integral Stage Design Parameters,
Proceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-63586
DOI:
10.1115/GT2017-63586
-
Wein, L.; Seume, J.R.; Herbst, F.
(2017):
Improved Prediction of Labyrinth Seal Performance through Scale Adaptive Simulation and Stream Aligned Grids,
Proceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-64257
DOI:
10.1115/GT2017-64257
-
Wolff, T.; Seume, J.R.
(2016):
Modeling the Transient Aerodynamic Effects During the Motion of a Flexible Trailing Edge,
Journal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 082038
DOI:
10.1088/1742-6596/753/8/082038
-
Schwerdt, L.; Hauptmann, T.; Kunin, A.; Wallascheck, J.; Wriggers, P.; Panning-von Scheidt, L.; Löhnert, S.; Seume, J.R.
(2016):
Aerodynamical and Structural Analysis of Operationally used Turbine Blades,
5th International Conference on Through-life Engineering Servies, 1-2 November 2016, Cranfield, England
DOI:
10.1016/j.procir.2016.09.023
-
Henke, M.; Wein, L.; Kluge, T.; Biester, M.H.-O.; Guendogdu, Y.; Seume, J.R.
(2016):
Experimental and Numerical Verification of the Core-Flow in a New Low-Pressure Turbine,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57101
DOI:
10.1115/GT2016-57101
ISBN:
978-0-7918-4970-5
-
Adamczuk, R.R.; Seume, J.R.
(2016):
Numerical Evaluation of the Condition of a Jet Engine Through Exhaust Jet Analysis,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56947
DOI:
10.1115/GT2016-56947
ISBN:
978-0-7918-4970-5
-
Ernst, B.; Seume, J.R.; Herbst, F.
(2016):
Effect of Turbulence and Transition Models on the CFD-based
Performance Prediction of Wind Turbines
,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56728
DOI:
10.1115/GT2016-56728
ISBN:
978-0-7918-4987-3
-
Fischer, T.; Raetz, H.; Peters, M.; Seume, J.R.
(2016):
Low inertia centrifugal compressor wheels: Influence of back disk cavity on aerodynamic losses and axial thrust load,
Proceedings of 12th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, UK
DOI:
10.1177/1687814017690695
-
Fischer, T.; Rudersdorf, M.; Burgmann, S.; kleine Sextro, T.; Seume, J.R.
(2016):
Investigation of a Diffuser-Volute Combination with Variable Cross-Sectional Area for Centrifugal Fans
,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56299
DOI:
10.1115/GT2016-56299
ISBN:
978-0-7918-4968-2
-
von der Haar, H.; Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R.
(2016):
Defect Detection in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases,
Proceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-57847
DOI:
10.1115/GT2016-57847
ISBN:
978-0-7918-4982-8
-
Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R.
(2016):
Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56467
DOI:
10.1115/GT2016-56467
ISBN:
978-0-7918-4982-8
-
Hauptmann, T.; Seume, J.R.
(2016):
Aerodynamic Excitation for Variable Tip Gap,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Corea, GT2016-57217
DOI:
10.1115/GT2016-57217
ISBN:
978-0-7918-4984-2
-
Koepplin, V.; Herbst, F.; Seume, J.R.
(2016):
Correlation-based Riblet Model for Turbomachinery Applications,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56293
DOI:
10.1115/GT2016-56293
-
Müller, C.; Baier, R.-D.; Seume, J.R.; Herbst, F.
(2016):
DNS-Based Analysis of RANS Predictions of a Low-Pressure Turbine Cascade,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57582
DOI:
10.1115/GT2016-57582
ISBN:
978-0-7918-4971-2
-
Schinnerl, M.; Seume, J.R.; Ehrhard, J.; Bogner, M.
(2016):
Heat Transfer Correction Methods for Turbocharger Performance Measurements,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56770
DOI:
10.1115/GT2016-56770
ISBN:
978-0-7918-4986-6
-
kleine Sextro, T.; Lübbert, N.; Rätz, H.; Seume, J.R.
(2016):
Heat Flow In a Turbocharger Shaft and its Impact on the Bearing System,
Proceedings of the 12th International Conference on Turbochargers and Turbocharging (IMECHE), 17-18 May, London, England, C6231/110
-
Hurfar, C.M.; Keller, C.; Mumcu, A.; Seume, J.R.
(2016):
An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 2: Experimental Verification,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56969
DOI:
10.1115/GT2016-56969
ISBN:
978-0-7918-4969-9
-
Mumcu, A.; Keller, C.; Hurfar, C. M.; Seume, J.R.
(2016):
An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 1: Design and Methodology,
Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56020
DOI:
10.1115/GT2016-56969
ISBN:
978-0-7918-4969-9
-
Kunte, H.; Seume, J.R.
(2016):
Design of a turbine-generator-unit for commercial vehicle ORC applications,
Proceedings of 12th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, C6231-155
-
Siemann, J.; Krenz, I.; Seume, J.R.
(2016):
Experimental Investigation of Aspiration in a Multi-Stage High-Speed Axial-Compressor,
Proceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-56440
DOI:
10.1115/GT2016-56440
ISBN:
978-0-7918-4969-9
-
Winstroth, J.; Seume, J.R.
(2016):
On the Influence of Airfoil Deviations on the Aerodynamic Performance of Wind Turbine Rotors,
Journal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 022058
DOI:
10.1088/1742-6596/753/2/022058
-
Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Kauth, F.; Seume, J.R.
(2016):
Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift Systems,
ESARS-ITEC Conference, 2-4 November 2016, Toulouse, France
DOI:
10.1109/ESARS-ITEC.2016.7841338
-
Vorreiter, A; Seume, J.R.
(2015):
Effects of Circulation Control on a Multi-Stage Axial Compressor,
Proceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows,13-16 July 2015, Lerici, Italy, ISAIF12-094
-
Kunte, H.; Seume, J.R.; Pautov, D.; Cherkasova, M.; Zabelin, N.; Olennikov, S.; Rassokhin, V.
(2015):
Supersonic Impulse Turbine for Automotive Waste Heat Recovery: A Comparison of three Designs of Turbine Blade Profiles,
11th European Turbomachinery Conference, 23-27 March 2015, Madrid, Spain, ETC2015-092
-
Vorreiter, A.
(2015):
Feasibility Study on a Single-Stage Tandem Axial Compressor for an Active High-Lift-System,
Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
ISBN:
978-4-89111-008-6
-
kleine Sextro, T.; Steglich, T.; Seume, J.R.
(2015):
Variable Inlet Guide Vane Devices for a Turbocharger Compressor,
Proceedings of International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan, IGTC2015-0161
ISBN:
978-4-89111-008-6
-
Teichel, S.; Verstraete, T.; Seume, J.R.
(2015):
Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift Systems,
Proceedings of the International Gas Turbine Congress 2015, 15-20 November, Tokyo, Japan
ISBN:
978-4-89111-008-6
-
Hohenstein, S.; Gilge, P.; Seume, J.R.
(2015):
Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine Blade,
Proceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan, IGTC2015-0078
ISBN:
978-4-89111-008-6
-
Müller, C.; Herbst, F.; Fiala, A.; Zscherp, C.; Kügeler, E.; Seume, J.R.
(2015):
Parameter Study for an Improved Prediction of Wake-Induced Transition in Low-Pressure Turbines,
Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan, IGTC2015-0043
ISBN:
978-4-89111-008-6
-
Drechsel, B.; Seume, J.R.; Herbst, F.
(2015):
On the Numerical Prediction of the Influence of Tip Flow on Diffuser Stability,
Proceedings of the International Gas Turbine Congress 2015, November 15-20, 2015, Tokyo, Japan
ISBN:
978-4-89111-008-6
-
Fischer, T.; Peters, M.; Seume, J.R.
(2015):
Low Inertia Centrifugal Compressor Wheels: Back Disk Geometry Optimization,
Proceedings of the International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan
ISBN:
978-4-89111-008-6
-
Hartmann, U.; Seume, J.R.
(2015):
Application of an Algebraic Reconstruction Algorithm to Tomographic BOS Measurements,
Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
ISBN:
978-4-89111-008-6
-
Hauptmann, T.; Aschenbruck, J.; Seume, J.R.
(2015):
Forced Response Excitation due to Variances in a Multi-Stage Axial Turbine,
Proceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan
ISBN:
978-4-89111-008-6
-
Brand, C.R.; Seume, J.R.
(2015):
Flaps for Wind Turbine Applications: Results of an Acoustic Study,
Proceedings of the EWEA Annual Event, 17-20 November 2015, Paris, France
-
Keller, C.; Willeke, T.; Burrafato, S.; Seume, J.R.
(2015):
Design Process of a 1.5-Stage Axial Compressor for Experimental Flutter Investigations,
Proceedings of the International Gas Turbine Congress, 15-20 November 2015, Tokyo, Japan, IGTC2015-0141
ISBN:
978-4-89111-008-6
-
Drechsel, B.; Müller, C.; Herbst, F.; Seume, J.R.
(2015):
Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part B: Scale-Resolving Simulations,
Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42477
DOI:
10.1115/GT2015-42477
ISBN:
978-0-7918-5663-5
-
Siemann, J.; Seume, J.R.
(2015):
Design of an Aspirated Compressor Stator by Means of DOE,
Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42474
DOI:
10.1115/GT2015-42474
ISBN:
978-0-7918-5663-5
-
Kuschel, M.; Drechsel, B.; Kluß, D.; Seume, J.R.
(2015):
Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part A: Experimental Results,
Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42476
DOI:
10.1115/GT2015-42476
ISBN:
978-0-7918-5663-5
-
Meinzer, C.; Bittner, S.L.; Schmitt, S.; Kielb, R.E.; Seume, J.R.
(2015):
Design of a Single Stage Turbine for the Quantification of Aerodynamic Damping,
Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42641
DOI:
10.1115/GT2015-42641
ISBN:
978-0-7918-5677-2
-
Winstroth, J.; Seume, J.R.
(2015):
Error Assessment of Blade Deformation Measurements on a Multi-Megawatt Wind Turbine Based on Digital Image Correlation,
Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-43622
DOI:
10.1115/GT2015-43622
ISBN:
978-0-7918-5680-2
-
Hurfar, M.; Bartelt, M.; Seume, J.R.
(2015):
A Scaling Method for Modal Sound Propagation in Annular Ducts,
Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-42839
DOI:
10.1115/GT2015-42839
ISBN:
978-0-7918-5664-2
-
Denkena, B.; Böß,V.; Nespor, D.; Gilge, P.; Hohenstein, S.; Seume, J.R.
(2015):
Prediction of the 3D Surface Topography after Ball End Milling and its Influence on Aerodynamics
,
Conference on Modelling of Machining Operations (15th CMMO), 11-12 Juni, Karlsruhe, Germany
DOI:
10.1016/j.procir.2015.03.049
-
Aschenbruck, J.; Hauptmann, T.; Seume, J.R.
(2015):
Influence of Multi-Hole Pressure Probes on the Flow-Field in Axial-Turbines,
Proceedings of 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-155
-
Kluge, T.; Henke, M.; Seume, J.R.
(2015):
Comparison of Different Methods for the Analysis of Time-Resolved Flow Field Measurements in an Axial Turbine,
Proceedings of the ETC 11, 23-26 March 2015, Madrid, Spain, ETC2015-189
-
Von Seggern, H.; Seume, J.R.; Vorreiter, A.
(2015):
Measuring the Dynamic Thinning Process of Free Fluid Films with LED-IF,
Proceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows,13-16 July 2015, Lerici, Italy, ISAIF12-093
-
Flores, D.; Seume, J.R.
(2015):
The Influence of Labyrinth Flows on the Aerodynamic Performance of an Axial Compressor,
Proceedings of
11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-117
-
Winstroth, J.; Schön, L.; Ernst, B.; Seume, J.R.
(2014):
Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: A Comparison to Aeroelastic Simulations of a Multi-Megawatt Wind Turbine
,
The Science of Making Torque from Wind 2014, Journal of Physics: Conference Series, 18-20 June 2014, Copenhagen, Denmark
DOI:
10.1088/1742-6596/524/1/012064
-
Wolff, T.; Ernst, B.; Seume, J.R.
(2014):
Aerodynamic Behavior of an Airfoil with Morphing Trailing Edge for Wind Turbine Applications,
The Science of Making Torque from Wind 2014, 18-20 June 2014, Copenhagen, Denmark
DOI:
10.1088/1742-6596/524/1/012018
-
Ernst, B.; Schmitt, H.; Seume, J.R.
(2014):
Effect of Geometric Uncertainties on the Aerodynamic Characteristic of Offshore Wind Turbine Blades,
The Science of Making Torque from Wind 2012, Journal of Physics: Conference Series, Oldenburg, Germany
DOI:
10.1088/1742-6596/555/1/012033
-
Witthaus, S.; Seume, J.R.
(2014):
Boundary Condition for the Implementation of Arbitrary Acoustical Modes,
inter.noise 2014, 43rd International Congress on Noise Control Engineering, 16-19 November 2014, Melbourne, Australia
-
Aschenbruck, J.; Adamczuk, R.; Seume, J.R.
(2014):
Recent Progress in Turbine Blade and Compressor Blisk Regeneration,
3rd International Through-life Engineering Services Conference, EPSRC Centres for Innovative Manufacturing, 4-5 November 2014, Cranfield, England
DOI:
10.1016/j.procir.2014.07.016
-
Wolff, T.; Herbst, F.; Freund, O.; Le, L.; Seume, J.R.
(2014):
Validating the Numerical Prediction of the Aerodynamics of an
Axial Compressor,
Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25530
DOI:
10.1115/GT2014-25530
ISBN:
978-0-7918-4561-5
-
Pohle, L.; Aschenbruck, J.; Panning- von Scheidt, L.; Seume, J.R.; Wallaschek, J.
(2014):
Dynamic Behaviour of a Mistuned Air Turbine: Comparison between simulations and measurements,
Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-26025
DOI:
10.1115/GT2014-26025
ISBN:
978-0-7918-4577-6
-
Aschenbruck, J.; Seume, J.R.
(2014):
Experimentally Verified Study of Regeneration-Induced Forced Response in Axial Turbines.,
Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25664
DOI:
10.1115/GT2014-25664
ISBN:
978-0-7918-4577-6
-
Porzig, D.; Raetz, H.; Schwarze, H.; Seume, J.R.
(2014):
Thermal Analysis of Small high-speed floating-ring Journal bearings,
Proceedings of 11th International Conference on Turbochargers and Turbocharging (IMechE), 13-14 May 2014, London, UK
-
Flores, D.; Seume, J.R.
(2014):
Selecting Cavity Geometries for Improving the Aerodynamic Performance of an Axial Compressor,
Proceedings of the ASME Turbo Expo 2014, 16-20 June 2014, Düsseldorf, Germany, GT2014-25328
DOI:
10.1115/GT2014-25328
ISBN:
978-0-7918-4560-8
-
Bartelt, M.; Laguna, J.D.; Seume, J.R.
(2013):
Synthetic Sound Source Generation for Acoustical Measurements in Turbomachines,
Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95045
DOI:
10.1115/GT2013-95045
ISBN:
978-0-7918-5524-9
-
Herbst, F.; Fiala, A.; Seume, J.R.
(2013):
Modelling Vortex Generating Jet-Induced Transition in Low-Pressure Turbines,
Proceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, USA, GT2013-94962
DOI:
10.1115/GT2013-94962
ISBN:
978-0-7918-5523-2
-
Kunte, H.; Seume J.R.
(2013):
Design of a Partial Admission Impulse Turbine for an Automotive ORC-Application,
2nd International Seminar on ORC Power Systems, ASME, 7-8 October 2013, Rotterdam, Netherlands
-
Adamczuk, R.; Hartmann, U.; Seume, J.R.
(2013):
Experimental Demonstration of Analyzing an Engine’s Exhaust Jet with the Background-Oriented Schlieren Method,
AIAA Ground Testing Conference, 24-27 June 2013, San Diego, USA
-
Belz, J.; May, M.; Siemann, J.; Seume, J.R.; Voigt, C.; Boehmer, H.; Grueber, B.
(2013):
Excited Blade Vibration for Aeroelastic Investigations of a Rotating Blisk using Piezo-Electric Macro Fiber Composites,
Proceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA, GT2013-95735
DOI:
10.1115/GT2013-95735
ISBN:
978-0-7918-5527-0
-
Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R.
(2013):
Impact of Defects and Damage in Aircraft Engines on the Exhaust Jet,
Proceedings of the ASME Turbo Expo, ASME, 3-7 June 2013, San Antonio, USA, GT2013-95709
DOI:
10.1115/GT2013-95079
ISBN:
978-0-7918-5513-3
-
Adamczuk, R.; Seume, J.R.
(2013):
Early Assessment of Defects and Damage in Jet Engines,
2nd International Through-life Engineering Services Conference, 2013, Cranfield, England
DOI:
10.1016/j.procir.2013.07.022
-
Hohenstein, S.; Aschenbruck, J.; Seume, J.R.
(2013):
Aerodynamic Effects of Non-Uniform Surface Roughness on a Turbine Blade,
Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT-2013-95433
DOI:
10.1115/GT2013-95433
ISBN:
978-0-7918-5522-5
-
Hohenstein, S.; Seume J.R.
(2013):
Numerical Investigation on the Influence of Anisotropic Surface Structures on the Skin Friction,
Proceedings of 10th European Conference on Turbomachinery (ETC), 15-19 April 2013, Lappeenranta, Finnland
-
Aschenbruck, J.; Meinzer, C.E.; Pohle, L.; Panning-von Scheidt, L.; Seume, J.R.
(2013):
Regeneration-Induced Forced Response in Axial Turbines,
Proceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95431
DOI:
10.1115/GT2013-95431
ISBN:
978-0-7918-5527-0
-
Aschenbruck, J.; Meinzer, C.E.; Seume, J.R.
(2013):
Influence of Regeneration-Induced Variances of Stator Vanes on the Vibration Behavior of Rotor Blades in Axial Turbines,
Proceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-113
-
Biester, M. H.-O.; Karapetrow, D.;Seume, J.R.
(2013):
Effect of the Tip Clearance on End Wall Heat-Transfer in a HP Turbine,
Proceedings of the ASME Turbine Blade Tip Symposium, 30 September - 3 October 2013, Hamburg, Germany, TBTS2013-2069
DOI:
10.1115/TBTS2013-2069
ISBN:
978-0-7918-5607-9
-
Biester, M. H.-O.; Wiegmann, F.; Guendogdu, Y.;Seume, J.R.
(2013):
Time-Resolved Numerical Study of Axial Gap Effects on Labyrinth-Seal Leakage and Secondary Flow in a LP Turbine,
Proceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95628
DOI:
10.1115/GT2013-95628
ISBN:
978-0-7918-5522-5
-
Laguna, J.D.; Bartelt, M.; Seume, J.R.
(2013):
Impact of Swirl on the Sensitivity of the Radial Mode Analysis in Turbomachinery,
Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95460
DOI:
10.1115/GT2013-95460
ISBN:
978-0-7918-5524-9
-
Laguna, J. D.; Bartelt, M.; Keller, C.; Seume, J.R.
(2013):
Sensitivity and Uncertainty of the Radial Mode Analysis for Turbomachinery Applications,
Proceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-109
-
Bartelt, M.; Meinzer, C.E.; Laguna, J.D.; Seume, J.R.
(2012):
Design Methodology and Experimental Validation of an Aeroacoustic Test Rig for Turbomachinery Applications,
Proceedings of 13th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, Tokyo, 2012, ISUAAAT-S12-4
-
Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.; Seume, J.R.
(2012):
Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies,
Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-69966
DOI:
10.1115/GT2012-69966
ISBN:
978-0-7918-4473-1
-
Henke, M.; Biester, M. H.-O.; Gündogdu, Y.; Lippl, F.; Mass, E.; Seume, J.R.
(2012):
Numerical Assisted Design of a Variable Rotating Vane Carrier Device for Turbine Test Rigs with Split Housing Structures using a Segmented Half-Ring Bearing Concept,
53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April 2012, Honolulu, Hawaii, AIAA 2012-1660
-
Biester, M. H.-O.; Henke, M.; Gündogdu, Y.; Engel, K.; Seume, J.R.
(2012):
Unsteady Wake-Blade Interaction: A Correlation between Surface Pressure Fluctuations and Loss Generation,
Proceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69616
DOI:
10.1115/GT2012-69616
ISBN:
978-0-7918-4474-8
-
Chahine, C; Seume, J.R.; Verstraete, T.
(2012):
The Influence of Metamodeling Techniques on the Multidisciplinary Design Optimization of a Radial Compressor Impeller,
Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-68358
DOI:
10.1115/GT2012-68358
ISBN:
978-0-7918-4474-8
-
Lietmeyer, C.; Seume, J.R.; Scheuer, R.; Vynnyk, T.; Reithmeier, E., Krawczyk, T.; Denkena, B.; Wojakowski, B.; Kling, R.; Overmeyer, L.
(2012):
Recent Advances in Manufacturing of Riblets on Compressor Blades and their Aerodynamic Impact,
Proceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69067
DOI:
10.1115/GT2012-69067
ISBN:
978-0-7918-4474-8
-
Freund, O.; Schaefer, P.; Rehder, H.-J.; Roehle, I.
(2011):
Experimental Investigations on Cooling Air Ejection at a Straight Turbine Cascade using PIV and QLS,
Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45296
DOI:
10.1115/GT2011-45296
ISBN:
978-0-7918-5465-5
-
Biester, M. H.-O.; Müller, L.; Gündogdu, Y.; Seume, J.R.
(2011):
Time-Resolved Numerical Investigation of the Interaction of Labyrinth Seal Leakage and Main-Flow in a 1.5-Stage LP Turbine,
Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45883
DOI:
10.1115/GT2011-45883
ISBN:
978-0-7918-5467-9
-
Sadovnichiy, V.; Kuschel, M.; Opilat, V.; Seume, J.R.
(2011):
Effect of Swirl and Tip Leakage on Flow Structure, Losses and Pressure Recovery in Axial Exhaust Diffuser,
Proceedings of the 9th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey
-
Opilat, V.; Seume, J.R.
(2011):
Application of Endoscopic PIV to the Interaction between Turbine and Exhaust Diffuser,
Proceedings of the 9th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey
-
Natkaniec, C.K.; Kammeyer, J.; Seume, J.R.
(2011):
Secondary Flow Structures and Losses in a Radial Turbine Nozzle,
Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46753
DOI:
10.1115/GT2011-46753
ISBN:
978-0-7918-5463-1
-
Herbst, F.; Kozulovic, D.; Seume, J.R.
(2011):
Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine Profiles,
Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45621
DOI:
10.1115/GT2011-45621
ISBN:
978-0-7918-5467-9
-
Opilat, V.; Seume, J.R.
(2011):
The Effect of the Operating Conditions of the Last Turbine Stage on the Performance of an Axial Exhaust Diffuser,
Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45668
DOI:
10.1115/GT2011-45668
ISBN:
978-0-7918-5467-9
-
Herbst, F.; Bluemel, S.; Fakiolas, E.; Seume, J.R.
(2011):
Numerical Investigation of the Interaction between Probe, Flow and Blading in an Axial-Turbine,
Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0194
-
Lietmeyer, C.; Oehlert, K.; Seume, J.R.
(2011):
Optimal Application of Riblets on Compressor Blades and their Contamination Behavior,
Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46855
DOI:
10.1115/GT2011-46855
ISBN:
978-0-7918-5467-9
-
Ernst, B.; Kammeyer, J.; Seume, J.R
(2011):
Improved Map Scaling Methods for Small Turbocharger Compressors,
Proceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-45345
DOI:
10.1115/GT2011-45345
ISBN:
978-0-7918-5463-1
-
Raetz, H.; Kammeyer, J.; Natkaniec, C.K.; Seume, J.R.
(2011):
Numerical Investigation of Aerodynamic Radial and Axial Impeller Forces in a Turbocharger,
Proceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-46360
DOI:
10.1115/GT2011-46360
ISBN:
978-0-7918-5463-1
-
Herbst, F.; Peters, M.; Seume, J.R.
(2011):
To the Limits of the Application of the BOS Method,
Proceedings of the 11th International Conference on Fluid Control, Measurements, and Visualization FLUCOME 2011, 5-9 December 2011, Keelung, Taiwan
-
Bartelt, M.; Kwitschinski, T.; Ceyrowsky, T.; Grates, D.; Seume, J.R.
(2011):
Experimental and Numerical Investigation of Different Rectangular Volute Geometries for Large Radial Compressors,
Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46296
DOI:
10.1115/GT2011-46296
ISBN:
978-0-7918-5467-9
-
Adamczuk, R.R.; Seume, J.R.
(2011):
Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions,
Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0175
-
Lietmeyer, C.; Chahine, C.; Seume, J.R.
(2011):
Numerical Calculation of the Riblet-Effect on Compressor Blades and Validation with Experimental Results,
Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0106
-
Kuschel, M.; Seume, J.R.
(2011):
Influence of Unsteady Turbine Flow on the Performance of an Exhaust Diffuser,
Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45673
DOI:
10.1115/GT2011-45673
ISBN:
978-0-7918-5467-9
-
Vorreiter, A.: Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R.
(2010):
Numerical Investigations of the Efficiency of Circulation Control in a Compressor Stator,
Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22721
DOI:
10.1115/GT2010-22721
ISBN:
978-0-7918-4402-1
-
Herbst, F.; Biester, M. H.-O; Fiala, A.; Engel, K.; Seume, J.R.
(2010):
Validation of RANS-Modelling Approaches for Active Flow Control by Vortex Generating Jets in a Low-Pressure Turbine Cascade,
Proceedings of the 8th International Symposium on Engineering Turbulence Modelling and Measurements – ETMM8, 9-11 June 2010, Marseille, France
-
Kammeyer, J.; Natkaniec, C.K.; Seume, J.R.
(2010):
Tip Leakage in Small Radial Turbines – Optimum Tip-Gap and Efficiency Loss Correlations,
Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22680
DOI:
10.1115/GT2010-22680
ISBN:
978-0-7918-4400-7
-
Alhaj, O.; Seume, J.R.
(2010):
Optical Investigation of Profile Loss in a Linear Turbine Cascade,
Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-23166
DOI:
10.1115/GT2010-23166
ISBN:
978-0-7918-4402-1
-
Glodic, N.; Bartelt, M.; Vogt, D.; Fransson, T.
(2009):
Aeroelastic Properties of Combined Mode Shape in an Oscillating LPT Cascade,
Proceedings of the 12th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, 1-4 September 2009 London, UK
-
Gómez, A.; Seume, J.R.
(2009):
Aerodynamic Coupling of Rotor and Tower in HAWTs,
Proceedings of European Wind Energy Conference (EWEC), 16-19 March 2009, Marseille, France
-
Goltz, I.; Böhmer, H.; Nollau, R.; Belz, J.; Grueber, B.; Seume, J.R.
(2009):
Piezo-Electric Actuation of Rotor Blades in an Axial Compressor,
Proceedings of 8th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria
-
Sadovnichiy, V.N.; Binner, M.; Seume, J.R.
(2009):
The Influence of Axial Gaps and Leaned-Twisted Guide Vanes on the Shroud Leackage and Turbine Stage Efficiency,
Proceedings of 8th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria
-
Gomez, A.; Seume, J.R.
(2009):
Modelling of Pulsating Loads on Wind Turbine Blades,
Proceedings of the 3rd International Conference on Energy Sustainability, 19-23 July 2009, San Francisco, California, USA, ES2009-90121
DOI:
10.1115/ES2009-90121
ISBN:
978-0-7918-4890-6
-
Siemann, J.; Nollau, R.; Grüber, B.; Seume, J.R.
(2009):
Controlled Excitation of Rotor Blades via Macro Fiber Composites in an Axial Compressor,
Proceedings of the 19th International Symposium on Air Breathing Engines, 7-11 September 2009, Montreal, Canada, ISABE-2009-1263
-
Früh, W.G.; Seume, J.R.; Gomez, A.
(2008):
Modelling the Aerodynamic Response of a Wind Turbine Blade Passing in Front of the Tower,
Proceedings of European Wind Energy Conference (EWEC), 31 March - 3 April 2008, Brussels, Belgium, 163_EWEC2008
-
Sieker, O.; Seume, J.R.
(2008):
Effects of Rotating Blade Wakes on Separation and Pressure Recovery in Turbine Exhaust Diffusers,
Proceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-50788
DOI:
10.1115/GT2008-50788
ISBN:
978-0-7918-4316-1
-
Guendogdu, Y.; Vorreiter, A.; Seume, J.R.
(2008):
Design of a Low Solidity Flow-Controlled Stator with Coanda Surface in a High Speed Compressor,
Proceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-51180
DOI:
10.1115/GT2008-51180
ISBN:
978-0-7918-4316-1
-
Ziaei Rad, M.; Nouri-Broujerdi, A.; Seume, J.R.
(2008):
Numerical Computation of a Compressible Laminar Flow with Heat Transfer in the Entrance Region of a Pipe,
Proceedings of ASME Summer Heat Transfer Conference, 10-14 August 2008, Jacksonville, Florida, USA, HT2008-56199
DOI:
10.1115/HT2008-56199
ISBN:
978-0-7918-4849-4
-
Sieker, O.; Seume, J.R.
(2007):
Influence of Artificial Generated Rotating Wakes on Separating Behaviour of Annular Diffusers,
Proceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July, 2007, Lyon, France ISAIF8-0054
-
Sadovnichiy, V.N.; Alhaj, O.; Binner, M.; Seume, J.R.
(2007):
CFD Models for Blade Tip and Diaphragm Gland Leakage Flow in Turbines of Disc-and Diaphragm Design,
Proceedings of 7th European Conference on Turbomachinery (ETC), Fluid Dynamics and Thermodynamics, 5-9 March 2007, Athens, Greece
-
Shaaban, S.; Seume, J.R.
(2007):
Aerodynamic Performance of Small Turbocharger Compressors,
Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27558
DOI:
10.1115/GT2007-27558
ISBN:
0-7918-4792-6
-
Herzog, N.; Binner, M.; Seume, J.R.; Rothe, K.
(2007):
Verification of Low-Flow Conditions in a Multistage Turbine,
Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27328
DOI:
10.1115/GT2007-27328
ISBN:
0-7918-4795-0
-
Barchewitz, L.P.; Seume, J.R.
(2007):
Dynamic Modelling and Controls of an Air Supply System for In-Flight PEM,
Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27900
DOI:
10.1115/GT2007-27900
ISBN:
0-7918-4792-6
-
Sieker, O.; Seume, J.R.
(2007):
Influence of Rotating Wakes on Separation in Turbine Exhaust Diffusers,
Proceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July 2007, Lyon, France, ISAIF8-0054
-
Oehlert, K.; Seume, J.R.; Wang, B.; Denkena, B.; Hage, W.; Knobloch, K.; Meyer, R.; Siegel, F.; Ostendorf, A.; Vynnyk, T.; Reithmeier, E.
(2007):
Exploratory Experiments on Machined Riblets for 2-D Compressor Blades,
Proceedings of ASME International Mechanical Engineering Congress & Exposition (IMECE), 11-15 November 2007, Seattle, Washington, USA, IMECE2007-43457
DOI:
10.1115/IMECE2007-43457
ISBN:
0-7918-4295-9
-
Imetovski. E.; Seume, J.R.
(2007):
Multi-Stage Effects of Bow and Sweep in a High-speed Axial Compressor,
Proceedings of the International Gas Turbine Congress (IGTC), 2-7 Dec. 2007, Tokyo, Japan, IGTC2007-TS-049
-
Goldhahn, E.; Seume, J.R.
(2006):
The Background Oriented Schlieren Technique: Sensitivity, Accuracy, Resolution and Application to a Three-Dimensional Density Field,
Proceedings of 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 26-29 June 2006, Lisbon, Portugal
(auch veröffentlicht in Experiment in Fluids, July 2007)
-
Oehlert, K.; Seume, J.R.
(2006):
Exploratory Experiments on Machined Riblets on Compressor Blades,
Proceedings of ASME 2nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093
DOI:
10.1115/FEDSM2006-98093
ISBN:
0-7918-4750-0
-
Oehlert, K.; Seume, J.R.
(2006):
Exploratory Experiments on Machined Riblets on Flat Plates,
Proceedings of ASME 2nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093
-
Fischer, K.; Seume, J.R.
(2006):
Location and Magnitude of Heat Sources in Solid Oxide Fuel Cells,
Proceedings of 4th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97167
(auch veröffentlicht in Journal of Fuel Cell Science and Technology, February 2009)
DOI:
10.1115/FUELCELL2006-97167
ISBN:
0-7918-4247-9
-
Beil, A.; Seume, J.R.
(2006):
Unsteady Performance of a PEMFC System Including Autothermal Methane Reforming,
Proceedings of 4th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97008
DOI:
10.1115/FUELCELL2006-97008
ISBN:
0-7918-4247-9
-
Braun, M.; Seume, J.R.
(2006):
Forward Sweep in a Four-Stage High-Speed Axial Compressor,
Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90218
DOI:
10.1115/GT2006-90218
ISBN:
0-7918-4241-X
-
Barchewitz, L.P.; Seume, J.R.
(2006):
Conceptual Analysis of Air Supply Systems for In-Flight PEM-FC,
Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90688
DOI:
10.1115/GT2006-90688
ISBN:
0-7918-4239-8
-
Schreyer, B.; Seume, J.R.
(2005):
The Loss Behaviour of Milled Turbine Blades,
Proceedings of 6th Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC 6), 7-11 March 2005, Lille, France, Vol. 1, p. 210, AFT-020_03 / 124
-
Herzog, N.; Gündogdu, Y.; Kang, G.; Seume, J.R.
(2005):
Part Load Operation of a Four-Stage Turbine,
Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68700
DOI:
10.1115/GT2005-68700
ISBN:
0-7918-4730-6
-
Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R.
(2005):
Improved Diffuser / Internal Volute Combinations for Centrifugal Compressors,
Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68894
DOI:
10.1115/GT2005-68894
ISBN:
0-7918-4730-6
-
Griebel, A.; Seume, J.R.
(2005):
The Influence of Variable Rotor-Stator Interaction on Boundary-Layer Development in an Axial Compressor,
Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68902
DOI:
10.1115/GT2005-68902
ISBN:
0-7918-4730-6
-
Hellmich, B.; Seume, J.R.
(2004):
Acoustic Resonance in a Four-Stage High-Speed Axial Compressor,
Proceedings of the 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 7-11 March 2004, Honolulu, Hawaii, ISROMAC10-2004-004
-
Fischer, A.; Riess, W.; Seume, J.R.
(2003):
Performance of Strongly Bowed Stators in a 4-Stage High Speed Compressor,
Proceedings of the ASME Turbo Expo, 16-19 June 2003, Atlanta, Georgia, USA, GT-2003-38392
DOI:
10.1115/GT2003-38392
ISBN:
0-7918-3689-4
-
Hellmich, B.; Braun, M.; Fischer, A.; Seume, J.R.
(2003):
Observations on the Causal Relationship between Blade count and Developing Rotating Stall in a Four Stage Axial Compressor,
Proceedings of 5th European Conference on Turbomachinery (ETC), 17-22 March 2003, Prague, Czech Republic
-
Fischer, A.; Seume, J.R.
(2003):
Comparison of Multistage CFD Calculations and Measurements in a high speed Compressor,
Conference on Modelling Fluid Flow (CMFF' 03) The 12th International Conference on Fluid Flow Technologies, 3-6 September 2003, Budapest, Hungary
-
Levy, Y.; Pismenny, J.; Reissner, A.; Riess, W.
(2002):
Experimental Study of Rotating Stalls in a Four-Stage Axial Compressor,
Proceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30362
DOI:
10.1115/GT2002-30362
ISBN:
0-7918-3610-X
-
Harbecke, U.G.; Riess, W.; Seume, J.R.
(2002):
The Effect of Milling Process Induced Coarse Surface Texture on Aerodynamic Turbine Profile Losses,
Proceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30333
DOI:
10.1115/GT2002-30333
ISBN:
0-7918-3610-X
-
Fleige, H.-U.; Riess, W.; Seume, J.R.
(2002):
Swirl and Tip Leakage Flow Interaction with Struts in Axial Diffusers,
Proceedings of the ASME Turbo Expo 2002, 3-6 June, Amsterdam, The Netherlands, GT-2002-30491
DOI:
10.1115/GT2002-30491
ISBN:
0-7918-3610-X
-
Runkel, J.; Hellmich, B.
(2002):
Operating Experience with an On-Line Vibration Control System for PRW Main Coolant Pumps,
Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. I, pp. 243-250
-
Hellmich, B.; Fischer, A.; Reissner, A.; Runkel, J.; Seume, J.R.
(2002):
Estimation of the Rotating Frequency from Rotor Frequency and Common Blade Number Integer Fractions in a Four Stage Axial Compressor,
Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 737-744
-
Hasemann, H.; Rautenberg, M.; Hagelstein, D.; Sonthipermpoon, K.
(2002):
The Vibration Behavior of Centrifugal Impeller Blades in the Five-Axis CNC Flank Milling Process,
Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 730-736
-
Fleige, H.-U.; Riess, W.
(2001):
Investigations of Gas Turbine Exhaust Diffuser,
Proceedings of 4th European Conference on Turbomachinery (ETC), 20-23 March 2001, Firenze, Italy
-
Harbecke, U.; Riess, W.
(2001):
Experimental and Numerical Investigation of a Technically Rough Turbine Blade Cascade,
Proceedings of 4th European Conference on Turbomachinery (ETC), 20-23 March 2001, Firenze, Italy
-
Chen, J.; Hasemann, H.; Cheng, X.; Rautenberg M.
(2001):
Stall Inception Behaivior in a Centrifugal Compressor Re-examined using Wavelet Method,
Proceedings of 5th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland
-
Chen, Y.N.; Hagelstein, D.; Haupt, U.; Rautenberg, M.
(2001):
Behavior of Deep Surge of Centrifugal Compressors,
Proceedings of 5th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland
-
Notkina, I.M.; Strizhak, L.J.; Suslina, L.P.; Beyer, B.; Bahm, F.; Rautenberg, M.
(2001):
Investigation of Three-Dimensional Compressible Turbulent Flow in a Vaneless Diffuser of a Radial Turbomachine Stage,
Proceedings of 5th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland
-
Hellmich, B.; Fiedler, J.; Runkel, J.; Stegemann, D.
(2000):
The Influence of Different SPN-Detector Emitter Materials to the Results of Neutron Noise Analysis,
Proceeding of Physor, 7-12 May 2000, Pittsburgh, Pennsylvania, USA
-
Runkel, J.; Stegemann, D.; Fiedler, J.; Heidemann, P.
(2000):
Vibration Monitoring by Neutron Noise Analysis and Acceleration Measurements inside Operating Nuclear Power Reactors,
Proceeding of Physor, 7-12 May 2000, Pittsburgh, Pennsylvania, USA
-
Chen, Y.N.; Hagelstein, D.; Kassens, I.; Haupt, U.; Rautenberg, M.
(2000):
Effect of the Decaying Overshoot of the Rankine Vortex on the Axial Flow Field Behind the Inlet Guide Vane of Centrifugal Compressors,
45th International Gas Turbine and Aeroengine Congress and Exhibition of the ASME, 8-11 May 2000, Munich, Germany, ASME-Paper 2000-GT-0427
-
Runkel J.; Fiedler, J.; Stegemann, D.
(2000):
Results of Noise Diagnostics in Different Reactor Types within International Scientific and Technological Cooperation Programs,
Proceedings of NPIC & HMIT, 13-17 November 2000, Washington D.C., USA
-
Runkel, J.; Heidemann, P.; Stegemann, D.
(2000):
Localization of Impacting Instrument Tubes Inside Operating Boiling Water Reactors by Use of Incore Accelerometers,
Proceedings of NPIC & HMIT, 13-17 November 2000, Washington D.C., USA
-
Gehring, S.; Riess, W.
(2000):
Analysis of the Mixing Process in a 1.5 Stage Turbine with Coolant Ejection,
Proceedings of the ASME Turbo Expo, 8-12 May 2000, Munich, Germany, 2000-GT-669
-
Runkel, J.; Stegemann, J.; Fiedler, P.; Heidemann, R.; Blaser, R.; Schmid, F.; Trobitz, M.; Hirsch, L.; Thoma, K.
(1999):
New Technologies for Acceleration and Vibration Measurements Inside Operating Nuclear Power Reactors,
Proceedings of the Workshop on Core Monitoring for Comercial Reactors: Improvements in Systems and Methods, 4-5 October 1999, Stockholm, Sweden, pp. 103-115
-
Gehring, S.; Riess, W.
(1999):
Throughflow Analysis for Cooled Turbines,
Proceedings of 3rd European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC), 2-5 March 1999, London, UK, IMechE 1999 C557/022, pp 79-88
-
Beyer, B.; Hasemann, H.; Rautenberg, M.
(1998):
The Use of Axial Flow Turbines for Driving Centrifugal Compressors,
Proceedings of 6th International Conference on Turbocharging and Air Management Systems, 3-5 November 1998, London, UK, IMechE 1998 C554/021, pp 183-192
-
Petrovic, M.; Riess, W.
(1997):
Off-Design Flow Analysis and Performance Prediction of Axial Turbines,
Proceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357
-
Johnson, T.; Becker, B.; Seume, J.R.; Termuehlen, H.
(1997):
First V84.3A Gas Turbine Installation at Hawthorn Station,
Proceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357
-
Hermann, J.; Hantschk, C.C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A.; Seume, J.R.; Vortmeyer, N.; Krause, W.
(1997):
Aktive Instabilitätskontrolle an einer 170 MW Gasturbine ,
18. Deutsch-Niederländischer Flammentag, 28-29 August 1997, Delft, Netherlands, VDI-Berichte 1313, pp. 337-344
-
Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A.
(1997):
Application of Active Combustion Instability Control to a Heavy Duty Gas Turbine,
Proceedings of ASME Asia Congress and Exposition, 30 September – 02 October 1997, Singapore
(auch veröffentlicht in Journal of Engineering for Gas Turbines and Power, October 1998)
-
Böhm, W.; Raake, D.; Regnery, D.; Seume, J.R.; Terjung, K.
(1996):
Testing the Model V84.3A Gas Turbine – Experimental Techniques and Results,
Proceedings of International Gas Turbine and Aeroengine Congress and Exposition, 5-7 November 1996, Jakarta, Indonesia, ASME -Paper 96-TA-14
-
Janssen, M.; Mönig, R.; Seume, J.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E.
(1994):
The Model V 84.3 Shop Tests: Compressor Flow Field Measurements and Evaluation,
Proceedings of International Gas Turbine and Aeroengine Congress and Exposition, 13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-462
-
Janssen, M.; Seume, J.R.; Zimmermann, H.
(1994):
The Model V 84.3 Shop Tests: Tip Clearance Measurements and Evaluation,
Proceedings of International Gas Turbine and Aeroengine Congress and Exposition,13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-319
-
Seume, J.R.; Simon, T.W.
(1987):
Flow Oscillation Effects in Tubes and Porous Material: Unresolved Issues,
Beitrag in: Morel, T.E., Dudenhoefer, J.E., Uzkan, T., Singh, P.J. (Hrsg.): Fluid Flow and Heat Transfer in Reciprocating Machinery.
ASME Winter Annual Meeting, 1987, Boston, Massachusetts, USA, pp. 55-62
New York: American Society of Mechanical Engineers 1988
-
Rautenberg, M.; Malobabic, M.
(1985):
On Turbochargers with Variable Geometry,
Gas Turbine Conference and Exhibit, 18-21 March 1985, Houston, Texas, ASME Paper 85-T-149
