Publikationen von Prof. Dr.-Ing. Jörg Seume

Abgelaufene Patente

  • Gottfried Wilhelm Leibniz Universität Hannover (2012): Fluid-flow machine for use in e.g. electric car, has compressor and turbine arranged on shaft that is connected with electrical generator for generating electrical energy, where generator is arranged on shaft between compressor and turbine, Erfinder. Jörg R. SEUME, Jasper KAMMEYER, Christoph NATKANIEC.05.04.2012. Anmeldung: 04.10.2010. DE, Patentschrift DE102010047421
  • Goodrich Hella Aerospace LS (2006): Air Outlet Device for a Vehicle, Erfinder: Jörg R. SEUME, Tom STEGLICH, Stefan THOMASSIN.01.06.2006. Anmeldung: 26.11.2004. EP und US, Patentschrift EP1661806 und US2006116063
  • Siemens (2001): Gas Turbine Blade, Erfinder: Jörg R. SEUME.25.01.2001. Anmeldung: 19.07.1999. WO, Patentschrift WO2001006096
  • Siemens (2000): Acoustic energy reduction method for gas turbine plant, Erfinder: Jörg R. SEUME, Mark OLESEN.20.04.2000. Anmeldung: 16.10.1998. DE, Patentschrift DE19849300
  • Siemens (1998): Burner Configuration and Method for Active Damping of Combustion Oscillations, Erfinder: Jörg R. SEUME, Nicolas VORTMEYER, Jakob HERMANN, Dieter VORTMEYER, Carl-Christian Hantschk, Peter ZANGL, Stephan GLEIS.06.08.1998. Anmeldung: 03.02.1998. WO, Patentschrift WO9834067
  • Siemens (1998): Method and Device for Acoustic Modulation of a Flame Produced by a Hybrid Burner, Erfinder: Jörg R. SEUME, Nicolas VORTMEYER, Stephan GLEIS, Jakob HERMANN, Dieter VORTMEYER. 12.03.1998. Anmeldung 19.08.1997. WO, Patentschrift WO9810226

Bücher, Monographien

  • Maroldt, N.; Kauth, F.; Seume, J.R. (2020): Experimental Validation of an Optimized Design Process for Transonic Mixed-Flow CompressorsContributions to the Final Symposium of the Collaborative Research Center 880, December 17-18, 2019, Braunschweig, Germany
    DOI: 10.1007/978-3-030-52429-6
    ISBN: 978-3-030-52428-9
  • Lechner, C.; Seume, J.R. (Hrsg.) (2019): Stationäre Gasturbinen3. neu bearbeitete Auflage, Springer-Verlag
    DOI: 10.1007/978-3-662-56134-8
    ISBN: 978-3-662-56134-8
  • Seume, J.R.; Gier, J. (2018): R8 GasturbinenIn: Dubbel-Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 25. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
    ISBN: 978-3-662-54805-9
  • Seume, J.R. (2014): Entscheidungsspielräume im Alltag des Maschinenbau-IngenieursIn: Verantwortung von Ingenieurinnen und Ingenieuren. (Hieber, L.; Kammeyer, H-U. (Hrsg.)), S.113-120, Springer-Verlag Berlin Heidelberg
    DOI: 10.1007/978-3-658-05530-1
    ISBN: 978-3-658-05529-5
  • Seume, J.; Mailach, R. (2014): R1 Grundlagen der StrömungsmaschinenIn: Dubbel-Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 24. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
    DOI: 10.1007/978-3-642-38891-0_102
    ISBN: 978-3-642-38890-3
  • Seume, J.R.; Gier, J. (2018): R8 GasturbinenIn: Dubbel-Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 25. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
    ISBN: 978-3-662-54805-9
  • Lechner, C.; Seume, J.R. (Hrsg.) (2010): Stationäre Gasturbinen2. neu bearbeitete Auflage, Springer-Verlag
    ISBN: 3540927877
  • Goldhahn, E.; Alhaj, O.; Herbst, F.; Seume, J. (2009): Quantitative Measurements of Three-Dimensional Density Fields Using the Background Oriented Schlieren Technique.In: Imaging Measurement Methods for Flow Analysis. (Nitsche, W.; Dobriloff, C.), pp.135-144. Springer-Verlag
    DOI: 10.1007/978-3-642-01106-1_14
    ISBN: 978-3-642-01106-1
  • Lechner, C.; Seume, J.R. (Hrsg.) (2003): Stationäre GasturbinenSpringer-Verlag Berlin Heidelberg
    DOI: 10.1007/978-3-662-10016-5
    ISBN: 978-3-540-92788-4

Dissertationen

  • Winstroth, J., Seume, J, Kühn, M. (2020): Optische Erfassung der Rotorblattverformungen von Windenergieanlagen der Multi-Megawatt-Klasse durch digitale BildkorrelationInstitut für Turbomaschinen und Fluid-Dynamik, Hannover, Berichte aus dem Institut für Turbomaschinen und Fluid-Dynamik - Band 16

Internationale Konferenzbeiträge, begutachtet

  • Amer, M.; Paehr, M.; Panning-von Scheidt, L.; Schmied, J.; Seume, J.R. (2021): Determining the influence of casing vibrational behaviour on rotordynamicsSIRM 2021, 14th International Conference on Dynamics of Rotating Machines, Gdansk, Poland, 17th - 19th February 2021
  • Schödel, M.; Menze, M.; Seume, J.R. (2021): Numerical Investigation of a Centrifugal Compressor with various Diffuser Geometries for Fuel Cell ApplicationsProceedings of 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ETC, Danzig, Polen, ETC2021-686
  • Kuestner, C.; Seume, J.R. (2021): Axial-Radial Diffuser With Integrated Exhaust Hood for An Automotive Turbocharger With Axial TurbineProceedings of ASME Turbo Expo 2021 & Turbomachinery Technical Conference and Exposition T2021, June 07-11, 2021, Virtual Conference
    DOI: 10.1115/GT2021-58600
    ISBN: 978-0-7918-8493-5
  • Lehnhoff, S.; Kidambi S.A.P.; van Dooren, M.F.; Kühn, M.; Seume, J.R. (2020): Full scale rotor blade deformation measurements in comparison with aeroelastic simulations based on measured high-resolution wind fieldsThe Science of Making Torque from Wind (TORQUE 2020), Journal of Physics: Conference Series, Vol. 1618, Delft, Netherlands
    DOI: 10.1088/1742-6596/1618/5/052036
  • Nachtigal, P.; Rätz, H.; Mai, H.; Seume, J.R. (2020): Design and validation of a pulse generator for the pulse shaping of the turbine inlet pressure at the hot-gas test bench14th International Conference on Turbochargers and Turbocharging, Institution of Mechanical Engineers, CRC Press, S. 48-61
    DOI: 10.1201/9781003132172
    ISBN: 978-0-367-67645-2
  • Kluge, T.; Lettmann, I.; Oettinger, M.; Wein, L.; Seume, J. R. (2020): Unsteady Flow Phenomena in Turbine Shroud CavitiesProceedings of the Global Power and Propulsion Society, Global Power and Propulsion Society, GPPS-CH-2020-0064
    DOI: 10.33737/gpps20-tc-64
    ISSN: 2504-4400
  • Wein, L.; Kluge, T.; Hain, R.; Fuchs, T.; Kähler, C.; Schmierer, R.; Herbst, F.; Seume, J. R. (2020): Validation of RANS Turbulence Models for Labyrinth Seal Flows by Means of Particle Image VelocimetryProceedings of ASME Turbo Expo 2020, 21.-25.September, 2020, London, UK, GT2020-14885
    DOI: 10.1115/GT2020-14885
    ISBN: 978-0-7918-8421-8
  • Zeh, C.; Willers, O.; Hagemann, T.; Schwarze, H.; Seume, JR. (2020): Evaluation of the Rotor Temperature Distribution of an Automotive Turbocharger Under Hot Gas Conditions Including Indirect Experimental ValidationProceedings of ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, GT2020, June 22-26, 2020, London, England, GT2020-16077
    DOI: 10.1115/GT2020-16077
    ISBN: 978-0-7918-8408-9
  • Ziaja, K.; Post, P.; Sembritzky, M.; Schramm, A.; Willers, O.; Kunte, H.; di Mare, F.; Seume, J.R. (2020): Numerical Investigation of a Partially Loaded Supersonic ORC Turbine StageProceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, GT2020-15645, September 21-15, 2020
    DOI: 10.1115/GT2020-15219
  • Oettinger, M.; Henke, M.; Seume, J. R. (2020): Effect of Diffusor Inhomogeneity on Full-Annulus Axial Turbine PerformanceProceedings of the Global Power and Propulsion Society (GPPS) Chania Conference, 7-9 September, 2020, Chania, Greece. Global Power and Propulsion Society. Paper GPPS-CH-2020-0139
    DOI: 10.33737/gpps20-tc-139
  • Schmid, M; Seume, J.R. (2020): Design of an aerofoil for small wind turbines with a focus on turbulent inflow conditionsProceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0066
    DOI: 10.33737/gpps20-tc-66
  • Lohse, S.; Fischer, F.; Koch, R.; Moreau, S.; Seume, J.R. (2020): Aeroacoustic Numerical Investigations of a scaled Compressor CascadeProceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0094
    DOI: 10.33737/gpps20-tc-94
  • Zieße, M.; Wein, L.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R. (2020): Validation of a Synthetic-Eddy Method for Modelling Incoming Wakes in Scale-Resolving Simulations of Turbomachinery CascadesProceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th– 9th September, 2020, GPPS-CH-2020-0017
    DOI: 10.33737/gpps20-tc-17
  • Wang, P.; Vera-Morales, M.; La, P.; Zangeneh, M.; Maroldt, N.; Willers, O.; Kauth, F.; Seume, J.R. (2020): Design of a Mixed-Flow Transonic Compressor for Active High-Lift System Using a 3D Inverse Design MethodologyProceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, September 21-25, 2020, Virtual, Online, GT2020-15645
    DOI: 10.1115/GT2020-15645
    ISBN: 978-0-7918-8410-2
  • Goeing, J.; Seehausen, H.; Herbst, F.; Bode, C.; Friedrichs J.; Seume, J. R. (2020): Performance simulation of roughness induced module variations of a jet propulsion by using pseudo bond graph theoryProceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, GT2020-14456
    DOI: 10.1115/GT2020-14456
    ISBN: 978-0-7918-8405-8
  • Goeing, J.; Seehausen, H.; Pak, V.; Lueck, S.; Friedrichs J.; Seume, J. R. (2020): Influence of combined compressor and turbine deterioration on the overall performance of a jet engine using RANS simulation and pseudo bond graph approachProceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0140
    DOI: 10.33737/gpps20-tc-140
  • Alldieck, R.; Seehausen, H.; Herbst, F.; Seume, J. R. (2020): The Effect of Rough-Wall Boundary Condition on RANS-Based Transition PredictionProceedings of Global Power and Propulsion Societys (GPPS) Chania20, GPPS-CH-2020-0053
    DOI: 10.33737/gpps20-tc-53
  • Oettinger, M.; Mimic, D.; Henke, M.; Schmunk, O.; Seume, J. R. (2019): Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure TurbineProceedings of Global Power and Propulsion Society (GPPS) Beijing Conference, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0207
    DOI: 10.33737/gpps19-bj-207
  • Zieße, M.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R. (2019): Enhanced Synthetic-Eddy-Method for Generating Moving Incoming Wakes and Turbulence in Scale-Resolving SimulationsProceedings of the International Gas Turbine Congress 2019, 17–22 November 2019, Tokyo, Japan, 66
  • Kauth, F.; Maroldt, N.; Seume, J. R.; (2019): Experimental validation of a compact mixed-flow compressor for an active high-lift systemIOP Conference Series: Materials Science and Engineering: Volume 643, Number 1
    DOI: 10.1088/1757-899X/643/1/012142
  • Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J. (2019): Analytical, Experimental and Numerical Investigations on the Impeller Backplane Pressure Distribution of a High-Speed Centrifugal Compressor4th International Rotating Equipment Conference (IREC), Wiesbaden
  • Mimic, D.; Oettinger, M.; Jätz, C.; Herbst, F.; Seume, J. R. (2019): Thermal End-Wall ContouringProceedings of ASME Turbo Expo 2019, 17–21 June 2019, Phoenix, USA, GT2019-90191
    DOI: https://doi.org/10.1115/GT2019-90191
    ISBN: 978-0-7918-5858-5
  • Kluge, T.; Wein, L.; Schmierer, R.; Seume, J.R. (2019): Sensitivity Analysis, Design, Instrumentation, and Experimental Validation of a Novel Labyrinth Seal RigProceedings of the ETC 13, European Turbomachinery Society
    DOI: 10.29008/ETC2019-078
  • Oettinger, M.; Henke, M.; Herbst, F.; Seume, J. R. (2019): Axial-Gap Size Effect on the Unsteady Flow Field at Midspan in a 1.5-Stage Low-Pressure TurbineProceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-084
  • Du, J.; Kauth, F.; Li, J.; Zhang, Q.; Seume, J.R. (2018): Experimental Study on the Influence of Casing Treatment on Near-Stall Unsteady Behavior of a Mixed-Flow CompressorProceedings of ASME Turbo Expo, ASME, Phoenix, Arizona, USA, GT2019-92034
    DOI: 10.1115/GT2019-92034
  • De Buhr, L.; Fleige, H.-U.; Seume, J.R. (2018): Model tests on the control behaviour of a test air supply system in open or closed-loop operationInt. Conf. on Screw Machines 2018, Dortmund, 18.+19. Sept. 2018
    DOI: 10.1088/1757-899X/425/1/012021
  • Fischer, T.; kleine Sextro, T.; Seume, J.R.; Flinte, J.; Eilts, P. (2018): Flow range of variable cross-section compressorsProceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK
  • Maehler, L.; Willeke, T.; Seume, J.R. (2018): Numerical Prediction of the Notch Effect of Riblets on Axial Compressor BladesProceedings of the Global Power and Propulsion Forum (GPPF), GPPS, 07-09 May 2018, Montreal, Canada, GPPS-2018-0025
    DOI: 10.5281/zenodo.1342723
  • Kauth, F.; Narjes, G.; Müller, J.-K.; Mertens, A.; Ponick, B.; Seume, J.R. (2018): Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future AircraftProceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0026
    DOI: 10.5281/zenodo.1342725
  • Hauptmann, T.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of Forced Response Methods in a Multi-Stage Axial TurbineProceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75390
    DOI: 10.1115/GT2018-75390
    ISBN: 978-0-7918-5115-9
  • Wein, L.; Seume, J.R.; Herbst, F. (2018): Unsteady Flow in a Labyrinth SealProceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-NA-2018-0036
    DOI: 10.15488/4239
  • Hartmann, U.; Seume, J.R. (2018): Automated Condition Evaluation of Hot-Gas Path Components of Jet Engines through Exhaust Jet AnalysisProceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75384
    DOI: 10.1115/GT2018-75384
    ISBN: 978-0-7918-5112-8
  • Frieling, D.; Griebel, A.; Wein, L.; Seume, J.R.; Herbst, F. (2018): The Influence of Rotor-Wakes on Boundary Layer Development in an Axial Compressor and its Numerical PredictionProceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75631
    DOI: 10.1115/GT2018-75631
    ISBN: 978-0-7918-5099-2
  • Fischer, T.; Willers, O.W.; Seume, J.R. (2018): Preliminary Design of a Partial Admission Turbine for the Waste Heat Recovery in Fuel CellsProceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK
  • Meinzer, C.E.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J.R. (2018): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine ShaftsProceedings of the Global Power & Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 10-12 January 2018, Zurich, Switzerland, GPPS-2018-0016
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J.; Berger, R.; Rolfes, R.; Keller, C.; Seume, J.R. (2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and MistuningProceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142, 2017, GPPS-2017-0142
  • Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R. (2017): Correcting Turbocharger Performance Measurements for Heat Transfer and FrictionProceedings of the ASME Turbo Expo 2017, 26-30 June 2017, Charlotte, NC, USA, GT2017-64283
    DOI: 10.1115/GT2017-64283
    ISBN: 978-0-7918-5095-4
  • Du, J.; Seume, J.R. (2017): Design of Casing Treatment on a Mixed-Flow CompressorProceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-65226
    DOI: 10.1115/GT2017-65226
    ISBN: 978-0-7918-5078-7
  • Fischer, T.; Burgmann, S.; Rudersdorf, M.; Seume, J.R. (2017): Partially Vaned Diffuser With Variable Cross-Section for Centrifugal Fans Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-63965
    DOI: 10.1115/GT2017-63965
    ISBN: 978-0-7918-5077-0
  • Willers, O.W.; Kunte, H; Seume, J.R. (2017): Supersonic Impulse Turbine for Organic Rankine Cycle (ORC) Truck Applications26th Aachen Colloquium Automobile and Engine Technology, 9-11 October 2017, Aachen; proceedings pp. 1557-1570, Aachener Kolloquium Fahrzeug- und Motorentechnik GbR, Aachen
    ISBN: 978-3-00-054182-7
  • Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family InteractionProceedings of 12th European Conference on Fluid Dynamics & Thermodynamics, April 3-7, Stockholm, Sweden, ETC2017-242
    DOI: 10.29008/ETC2017-242
  • Keller, C.; Kellersmann, A.; Friedrichs, J.; Seume, J.R. (2017): Influence of Geometric Imperfections on Aerodynamic and Aeroelastic Behavior of a Compressor Blisk Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-63556
    DOI: 10.1115/GT2017-63556
  • Willeke, T.; Hellberg, M.; Seume, J.R. (2017): A Numerical Concept Study on Internal Blade Cooling in Axial CompressorsProceedings of the ETC 12, 3-7 April 2017, Stockholm, Sweden, ETC2017-106
    DOI: 10.29008/ETC2017-106
  • Miro, S.; Broggi, M.; Beer, M.; Willeke, T.; Seume, J.R. (2017): Survival Signature Approach for the Reliability Analysis of an Axial Compressor27th European Safety and Reliability Conference ESREL, 18 – 22 June 2017, Portorož, Slovenia
  • Wein, L.; Seume, J.R.; Herbst, F. (2017): Improved Prediction of Labyrinth Seal Performance through Scale Adaptive Simulation and Stream Aligned GridsProceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-64257
    DOI: 10.1115/GT2017-64257
  • Wolff, T.; Seume, J.R. (2016): Modeling the Transient Aerodynamic Effects During the Motion of a Flexible Trailing EdgeJournal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 082038
    DOI: 10.1088/1742-6596/753/8/082038
  • Schwerdt, L.; Hauptmann, T.; Kunin, A.; Wallascheck, J.; Wriggers, P.; Panning-von Scheidt, L.; Löhnert, S.; Seume, J.R. (2016): Aerodynamical and Structural Analysis of Operationally used Turbine Blades5th International Conference on Through-life Engineering Servies, 1-2 November 2016, Cranfield, England
    DOI: 10.1016/j.procir.2016.09.023
  • Henke, M.; Wein, L.; Kluge, T.; Biester, M.H.-O.; Guendogdu, Y.; Seume, J.R. (2016): Experimental and Numerical Verification of the Core-Flow in a New Low-Pressure TurbineProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57101
    DOI: 10.1115/GT2016-57101
    ISBN: 978-0-7918-4970-5
  • Adamczuk, R.R.; Seume, J.R. (2016): Numerical Evaluation of the Condition of a Jet Engine Through Exhaust Jet AnalysisProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56947
    DOI: 10.1115/GT2016-56947
    ISBN: 978-0-7918-4970-5
  • Ernst, B.; Seume, J.R.; Herbst, F. (2016): Effect of Turbulence and Transition Models on the CFD-based Performance Prediction of Wind TurbinesProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56728
    DOI: 10.1115/GT2016-56728
    ISBN: 978-0-7918-4987-3
  • Fischer, T.; Raetz, H.; Peters, M.; Seume, J.R. (2016): Low inertia centrifugal compressor wheels: Influence of back disk cavity on aerodynamic losses and axial thrust loadProceedings of 12th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, UK
    DOI: 10.1177/1687814017690695
  • Fischer, T.; Rudersdorf, M.; Burgmann, S.; kleine Sextro, T.; Seume, J.R. (2016): Investigation of a Diffuser-Volute Combination with Variable Cross-Sectional Area for Centrifugal Fans Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56299
    DOI: 10.1115/GT2016-56299
    ISBN: 978-0-7918-4968-2
  • von der Haar, H.; Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Defect Detection in an Annular Swirl-Burner-Array by Optical Measuring Exhaust GasesProceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-57847
    DOI: 10.1115/GT2016-57847
    ISBN: 978-0-7918-4982-8
  • Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern AnalysisProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56467
    DOI: 10.1115/GT2016-56467
    ISBN: 978-0-7918-4982-8
  • Hauptmann, T.; Seume, J.R. (2016): Aerodynamic Excitation for Variable Tip GapProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Corea, GT2016-57217
    DOI: 10.1115/GT2016-57217
    ISBN: 978-0-7918-4984-2
  • Koepplin, V.; Herbst, F.; Seume, J.R. (2016): Correlation-based Riblet Model for Turbomachinery ApplicationsProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56293
    DOI: 10.1115/GT2016-56293
  • Müller, C.; Baier, R.-D.; Seume, J.R.; Herbst, F. (2016): DNS-Based Analysis of RANS Predictions of a Low-Pressure Turbine CascadeProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57582
    DOI: 10.1115/GT2016-57582
    ISBN: 978-0-7918-4971-2
  • Schinnerl, M.; Seume, J.R.; Ehrhard, J.; Bogner, M. (2016): Heat Transfer Correction Methods for Turbocharger Performance MeasurementsProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56770
    DOI: 10.1115/GT2016-56770
    ISBN: 978-0-7918-4986-6
  • kleine Sextro, T.; Lübbert, N.; Rätz, H.; Seume, J.R. (2016): Heat Flow In a Turbocharger Shaft and its Impact on the Bearing SystemProceedings of the 12th International Conference on Turbochargers and Turbocharging (IMECHE), 17-18 May, London, England, C6231/110
  • Hurfar, C.M.; Keller, C.; Mumcu, A.; Seume, J.R. (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 2: Experimental VerificationProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56969
    DOI: 10.1115/GT2016-56969
    ISBN: 978-0-7918-4969-9
  • Mumcu, A.; Keller, C.; Hurfar, C. M.; Seume, J.R. (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 1: Design and MethodologyProceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56020
    DOI: 10.1115/GT2016-56969
    ISBN: 978-0-7918-4969-9
  • Kunte, H.; Seume, J.R. (2016): Design of a turbine-generator-unit for commercial vehicle ORC applicationsProceedings of 12th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, C6231-155
  • Siemann, J.; Krenz, I.; Seume, J.R. (2016): Experimental Investigation of Aspiration in a Multi-Stage High-Speed Axial-CompressorProceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-56440
    DOI: 10.1115/GT2016-56440
    ISBN: 978-0-7918-4969-9
  • Winstroth, J.; Seume, J.R. (2016): On the Influence of Airfoil Deviations on the Aerodynamic Performance of Wind Turbine RotorsJournal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 022058
    DOI: 10.1088/1742-6596/753/2/022058
  • Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Kauth, F.; Seume, J.R. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift SystemsESARS-ITEC Conference, 2-4 November 2016, Toulouse, France
    DOI: 10.1109/ESARS-ITEC.2016.7841338
  • Vorreiter, A; Seume, J.R. (2015): Effects of Circulation Control on a Multi-Stage Axial CompressorProceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, 13-16 July 2015, Lerici, Italy, ISAIF12-094
  • Kunte, H.; Seume, J.R.; Pautov, D.; Cherkasova, M.; Zabelin, N.; Olennikov, S.; Rassokhin, V. (2015): Supersonic Impulse Turbine for Automotive Waste Heat Recovery: A Comparison of three Designs of Turbine Blade Profiles11th European Turbomachinery Conference, 23-27 March 2015, Madrid, Spain, ETC2015-092
  • kleine Sextro, T.; Steglich, T.; Seume, J.R. (2015): Variable Inlet Guide Vane Devices for a Turbocharger CompressorProceedings of International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan, IGTC2015-0161
    ISBN: 978-4-89111-008-6
  • Teichel, S.; Verstraete, T.; Seume, J.R. (2015): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift SystemsProceedings of the International Gas Turbine Congress 2015, 15-20 November, Tokyo, Japan
    ISBN: 978-4-89111-008-6
  • Hohenstein, S.; Gilge, P.; Seume, J.R. (2015): Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine BladeProceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan, IGTC2015-0078
    ISBN: 978-4-89111-008-6
  • Müller, C.; Herbst, F.; Fiala, A.; Zscherp, C.; Kügeler, E.; Seume, J.R. (2015): Parameter Study for an Improved Prediction of Wake-Induced Transition in Low-Pressure TurbinesProceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan, IGTC2015-0043
    ISBN: 978-4-89111-008-6
  • Drechsel, B.; Seume, J.R.; Herbst, F. (2015): On the Numerical Prediction of the Influence of Tip Flow on Diffuser StabilityProceedings of the International Gas Turbine Congress 2015, November 15-20, 2015, Tokyo, Japan
    ISBN: 978-4-89111-008-6
  • Fischer, T.; Peters, M.; Seume, J.R. (2015): Low Inertia Centrifugal Compressor Wheels: Back Disk Geometry OptimizationProceedings of the International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan
    ISBN: 978-4-89111-008-6
  • Hartmann, U.; Seume, J.R. (2015): Application of an Algebraic Reconstruction Algorithm to Tomographic BOS MeasurementsProceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
    ISBN: 978-4-89111-008-6
  • Hauptmann, T.; Aschenbruck, J.; Seume, J.R. (2015): Forced Response Excitation due to Variances in a Multi-Stage Axial TurbineProceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan
    ISBN: 978-4-89111-008-6
  • Brand, C.R.; Seume, J.R. (2015): Flaps for Wind Turbine Applications: Results of an Acoustic StudyProceedings of the EWEA Annual Event, 17-20 November 2015, Paris, France
  • Keller, C.; Willeke, T.; Burrafato, S.; Seume, J.R. (2015): Design Process of a 1.5-Stage Axial Compressor for Experimental Flutter InvestigationsProceedings of the International Gas Turbine Congress, 15-20 November 2015, Tokyo, Japan, IGTC2015-0141
    ISBN: 978-4-89111-008-6
  • Drechsel, B.; Müller, C.; Herbst, F.; Seume, J.R. (2015): Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part B: Scale-Resolving SimulationsProceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42477
    DOI: 10.1115/GT2015-42477
    ISBN: 978-0-7918-5663-5
  • Siemann, J.; Seume, J.R. (2015): Design of an Aspirated Compressor Stator by Means of DOEProceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42474
    DOI: 10.1115/GT2015-42474
    ISBN: 978-0-7918-5663-5
  • Kuschel, M.; Drechsel, B.; Kluß, D.; Seume, J.R. (2015): Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part A: Experimental ResultsProceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42476
    DOI: 10.1115/GT2015-42476
    ISBN: 978-0-7918-5663-5
  • Meinzer, C.; Bittner, S.L.; Schmitt, S.; Kielb, R.E.; Seume, J.R. (2015): Design of a Single Stage Turbine for the Quantification of Aerodynamic DampingProceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42641
    DOI: 10.1115/GT2015-42641
    ISBN: 978-0-7918-5677-2
  • Winstroth, J.; Seume, J.R. (2015): Error Assessment of Blade Deformation Measurements on a Multi-Megawatt Wind Turbine Based on Digital Image CorrelationProceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-43622
    DOI: 10.1115/GT2015-43622
    ISBN: 978-0-7918-5680-2
  • Hurfar, M.; Bartelt, M.; Seume, J.R. (2015): A Scaling Method for Modal Sound Propagation in Annular DuctsProceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-42839
    DOI: 10.1115/GT2015-42839
    ISBN: 978-0-7918-5664-2
  • Denkena, B.; Böß,V.; Nespor, D.; Gilge, P.; Hohenstein, S.; Seume, J.R. (2015): Prediction of the 3D Surface Topography after Ball End Milling and its Influence on AerodynamicsConference on Modelling of Machining Operations (15th CMMO), 11-12 Juni, Karlsruhe, Germany
    DOI: 10.1016/j.procir.2015.03.049
  • Aschenbruck, J.; Hauptmann, T.; Seume, J.R. (2015): Influence of Multi-Hole Pressure Probes on the Flow-Field in Axial-TurbinesProceedings of 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-155
  • Kluge, T.; Henke, M.; Seume, J.R. (2015): Comparison of Different Methods for the Analysis of Time-Resolved Flow Field Measurements in an Axial TurbineProceedings of the ETC 11, 23-26 March 2015, Madrid, Spain, ETC2015-189
  • Von Seggern, H.; Seume, J.R.; Vorreiter, A. (2015): Measuring the Dynamic Thinning Process of Free Fluid Films with LED-IFProceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, 13-16 July 2015, Lerici, Italy, ISAIF12-093
  • Flores, D.; Seume, J.R. (2015): The Influence of Labyrinth Flows on the Aerodynamic Performance of an Axial CompressorProceedings of 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-117
  • Winstroth, J.; Schön, L.; Ernst, B.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: A Comparison to Aeroelastic Simulations of a Multi-Megawatt Wind Turbine The Science of Making Torque from Wind 2014, Journal of Physics: Conference Series, 18-20 June 2014, Copenhagen, Denmark
    DOI: 10.1088/1742-6596/524/1/012064
  • Wolff, T.; Ernst, B.; Seume, J.R. (2014): Aerodynamic Behavior of an Airfoil with Morphing Trailing Edge for Wind Turbine ApplicationsThe Science of Making Torque from Wind 2014, 18-20 June 2014, Copenhagen, Denmark
    DOI: 10.1088/1742-6596/524/1/012018
  • Ernst, B.; Schmitt, H.; Seume, J.R. (2014): Effect of Geometric Uncertainties on the Aerodynamic Characteristic of Offshore Wind Turbine BladesThe Science of Making Torque from Wind 2012, Journal of Physics: Conference Series, Oldenburg, Germany
    DOI: 10.1088/1742-6596/555/1/012033
  • Witthaus, S.; Seume, J.R. (2014): Boundary Condition for the Implementation of Arbitrary Acoustical Modesinter.noise 2014, 43rd International Congress on Noise Control Engineering, 16-19 November 2014, Melbourne, Australia
  • Aschenbruck, J.; Adamczuk, R.; Seume, J.R. (2014): Recent Progress in Turbine Blade and Compressor Blisk Regeneration3rd International Through-life Engineering Services Conference, EPSRC Centres for Innovative Manufacturing, 4-5 November 2014, Cranfield, England
    DOI: 10.1016/j.procir.2014.07.016
  • Wolff, T.; Herbst, F.; Freund, O.; Le, L.; Seume, J.R. (2014): Validating the Numerical Prediction of the Aerodynamics of an Axial CompressorProceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25530
    DOI: 10.1115/GT2014-25530
    ISBN: 978-0-7918-4561-5
  • Pohle, L.; Aschenbruck, J.; Panning- von Scheidt, L.; Seume, J.R.; Wallaschek, J. (2014): Dynamic Behaviour of a Mistuned Air Turbine: Comparison between simulations and measurementsProceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-26025
    DOI: 10.1115/GT2014-26025
    ISBN: 978-0-7918-4577-6
  • Aschenbruck, J.; Seume, J.R. (2014): Experimentally Verified Study of Regeneration-Induced Forced Response in Axial TurbinesProceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25664
    DOI: 10.1115/GT2014-25664
    ISBN: 978-0-7918-4577-6
  • Porzig, D.; Raetz, H.; Schwarze, H.; Seume, J.R. (2014): Thermal Analysis of Small high-speed floating-ring Journal bearingsProceedings of 11th International Conference on Turbochargers and Turbocharging (IMechE), 13-14 May 2014, London, UK
  • Flores, D.; Seume, J.R. (2014): Selecting Cavity Geometries for Improving the Aerodynamic Performance of an Axial CompressorProceedings of the ASME Turbo Expo 2014, 16-20 June 2014, Düsseldorf, Germany, GT2014-25328
    DOI: 10.1115/GT2014-25328
    ISBN: 978-0-7918-4560-8
  • Bartelt, M.; Laguna, J.D.; Seume, J.R. (2013): Synthetic Sound Source Generation for Acoustical Measurements in TurbomachinesProceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95045
    DOI: 10.1115/GT2013-95045
    ISBN: 978-0-7918-5524-9
  • Herbst, F.; Fiala, A.; Seume, J.R. (2013): Modelling Vortex Generating Jet-Induced Transition in Low-Pressure TurbinesProceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, USA, GT2013-94962
    DOI: 10.1115/GT2013-94962
    ISBN: 978-0-7918-5523-2
  • Kunte, H.; Seume J.R. (2013): Design of a Partial Admission Impulse Turbine for an Automotive ORC-Application2nd International Seminar on ORC Power Systems, ASME, 7-8 October 2013, Rotterdam, Netherlands
  • Adamczuk, R.; Hartmann, U.; Seume, J.R. (2013): Experimental Demonstration of Analyzing an Engine’s Exhaust Jet with the Background-Oriented Schlieren MethodAIAA Ground Testing Conference, 24-27 June 2013, San Diego, USA
  • Belz, J.; May, M.; Siemann, J.; Seume, J.R.; Voigt, C.; Boehmer, H.; Grueber, B. (2013): Excited Blade Vibration for Aeroelastic Investigations of a Rotating Blisk using Piezo-Electric Macro Fiber CompositesProceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA, GT2013-95735
    DOI: 10.1115/GT2013-95735
    ISBN: 978-0-7918-5527-0
  • Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Impact of Defects and Damage in Aircraft Engines on the Exhaust JetProceedings of the ASME Turbo Expo, ASME, 3-7 June 2013, San Antonio, USA, GT2013-95709
    DOI: 10.1115/GT2013-95079
    ISBN: 978-0-7918-5513-3
  • Adamczuk, R.; Seume, J.R. (2013): Early Assessment of Defects and Damage in Jet Engines2nd International Through-life Engineering Services Conference, 2013, Cranfield, England
    DOI: 10.1016/j.procir.2013.07.022
  • Hohenstein, S.; Aschenbruck, J.; Seume, J.R. (2013): Aerodynamic Effects of Non-Uniform Surface Roughness on a Turbine BladeProceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT-2013-95433
    DOI: 10.1115/GT2013-95433
    ISBN: 978-0-7918-5522-5
  • Hohenstein, S.; Seume J.R. (2013): Numerical Investigation on the Influence of Anisotropic Surface Structures on the Skin FrictionProceedings of 10th European Conference on Turbomachinery (ETC), 15-19 April 2013, Lappeenranta, Finnland
  • Aschenbruck, J.; Meinzer, C.E.; Pohle, L.; Panning-von Scheidt, L.; Seume, J.R. (2013): Regeneration-Induced Forced Response in Axial TurbinesProceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95431
    DOI: 10.1115/GT2013-95431
    ISBN: 978-0-7918-5527-0
  • Aschenbruck, J.; Meinzer, C.E.; Seume, J.R. (2013): Influence of Regeneration-Induced Variances of Stator Vanes on the Vibration Behavior of Rotor Blades in Axial TurbinesProceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-113
  • Biester, M. H.-O.; Karapetrow, D.;Seume, J.R. (2013): Effect of the Tip Clearance on End Wall Heat-Transfer in a HP TurbineProceedings of the ASME Turbine Blade Tip Symposium, 30 September - 3 October 2013, Hamburg, Germany, TBTS2013-2069
    DOI: 10.1115/TBTS2013-2069
    ISBN: 978-0-7918-5607-9
  • Biester, M. H.-O.; Wiegmann, F.; Guendogdu, Y.;Seume, J.R. (2013): Time-Resolved Numerical Study of Axial Gap Effects on Labyrinth-Seal Leakage and Secondary Flow in a LP TurbineProceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95628
    DOI: 10.1115/GT2013-95628
    ISBN: 978-0-7918-5522-5
  • Laguna, J.D.; Bartelt, M.; Seume, J.R. (2013): Impact of Swirl on the Sensitivity of the Radial Mode Analysis in TurbomachineryProceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95460
    DOI: 10.1115/GT2013-95460
    ISBN: 978-0-7918-5524-9
  • Laguna, J. D.; Bartelt, M.; Keller, C.; Seume, J.R. (2013): Sensitivity and Uncertainty of the Radial Mode Analysis for Turbomachinery ApplicationsProceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-109
  • Bartelt, M.; Meinzer, C.E.; Laguna, J.D.; Seume, J.R. (2012): Design Methodology and Experimental Validation of an Aeroacoustic Test Rig for Turbomachinery ApplicationsProceedings of 13th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, Tokyo, 2012, ISUAAAT-S12-4
  • Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.; Seume, J.R. (2012): Impact of the Flow on an Acoustic Excitation System for Aeroelastic StudiesProceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-69966
    DOI: 10.1115/GT2012-69966
    ISBN: 978-0-7918-4473-1
  • Henke, M.; Biester, M. H.-O.; Gündogdu, Y.; Lippl, F.; Mass, E.; Seume, J.R. (2012): Numerical Assisted Design of a Variable Rotating Vane Carrier Device for Turbine Test Rigs with Split Housing Structures using a Segmented Half-Ring Bearing Concept53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April 2012, Honolulu, Hawaii, AIAA 2012-1660
  • Biester, M. H.-O.; Henke, M.; Gündogdu, Y.; Engel, K.; Seume, J.R. (2012): Unsteady Wake-Blade Interaction: A Correlation between Surface Pressure Fluctuations and Loss GenerationProceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69616
    DOI: 10.1115/GT2012-69616
    ISBN: 978-0-7918-4474-8
  • Chahine, C; Seume, J.R.; Verstraete, T. (2012): The Influence of Metamodeling Techniques on the Multidisciplinary Design Optimization of a Radial Compressor ImpellerProceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-68358
    DOI: 10.1115/GT2012-68358
    ISBN: 978-0-7918-4474-8
  • Lietmeyer, C.; Seume, J.R.; Scheuer, R.; Vynnyk, T.; Reithmeier, E., Krawczyk, T.; Denkena, B.; Wojakowski, B.; Kling, R.; Overmeyer, L. (2012): Recent Advances in Manufacturing of Riblets on Compressor Blades and their Aerodynamic ImpactProceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69067
    DOI: 10.1115/GT2012-69067
    ISBN: 978-0-7918-4474-8
  • Biester, M. H.-O.; Müller, L.; Gündogdu, Y.; Seume, J.R. (2011): Time-Resolved Numerical Investigation of the Interaction of Labyrinth Seal Leakage and Main-Flow in a 1.5-Stage LP TurbineProceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45883
    DOI: 10.1115/GT2011-45883
    ISBN: 978-0-7918-5467-9
  • Sadovnichiy, V.; Kuschel, M.; Opilat, V.; Seume, J.R. (2011): Effect of Swirl and Tip Leakage on Flow Structure, Losses and Pressure Recovery in Axial Exhaust DiffuserProceedings of the 9th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey
  • Opilat, V.; Seume, J.R. (2011): Application of Endoscopic PIV to the Interaction between Turbine and Exhaust DiffuserProceedings of the 9th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey
  • Natkaniec, C.K.; Kammeyer, J.; Seume, J.R. (2011): Secondary Flow Structures and Losses in a Radial Turbine NozzleProceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46753
    DOI: 10.1115/GT2011-46753
    ISBN: 978-0-7918-5463-1
  • Herbst, F.; Kozulovic, D.; Seume, J.R. (2011): Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine ProfilesProceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45621
    DOI: 10.1115/GT2011-45621
    ISBN: 978-0-7918-5467-9
  • Opilat, V.; Seume, J.R. (2011): The Effect of the Operating Conditions of the Last Turbine Stage on the Performance of an Axial Exhaust DiffuserProceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45668
    DOI: 10.1115/GT2011-45668
    ISBN: 978-0-7918-5467-9
  • Herbst, F.; Bluemel, S.; Fakiolas, E.; Seume, J.R. (2011): Numerical Investigation of the Interaction between Probe, Flow and Blading in an Axial-TurbineProceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0194
  • Lietmeyer, C.; Oehlert, K.; Seume, J.R. (2011): Optimal Application of Riblets on Compressor Blades and their Contamination BehaviorProceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46855
    DOI: 10.1115/GT2011-46855
    ISBN: 978-0-7918-5467-9
  • Ernst, B.; Kammeyer, J.; Seume, J.R (2011): Improved Map Scaling Methods for Small Turbocharger CompressorsProceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-45345
    DOI: 10.1115/GT2011-45345
    ISBN: 978-0-7918-5463-1
  • Raetz, H.; Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2011): Numerical Investigation of Aerodynamic Radial and Axial Impeller Forces in a TurbochargerProceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-46360
    DOI: 10.1115/GT2011-46360
    ISBN: 978-0-7918-5463-1
  • Herbst, F.; Peters, M.; Seume, J.R. (2011): To the Limits of the Application of the BOS MethodProceedings of the 11th International Conference on Fluid Control, Measurements, and Visualization FLUCOME 2011, 5-9 December 2011, Keelung, Taiwan
  • Bartelt, M.; Kwitschinski, T.; Ceyrowsky, T.; Grates, D.; Seume, J.R. (2011): Experimental and Numerical Investigation of Different Rectangular Volute Geometries for Large Radial CompressorsProceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46296
    DOI: 10.1115/GT2011-46296
    ISBN: 978-0-7918-5467-9
  • Adamczuk, R.R.; Seume, J.R. (2011): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet ConditionsProceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0175
  • Lietmeyer, C.; Chahine, C.; Seume, J.R. (2011): Numerical Calculation of the Riblet-Effect on Compressor Blades and Validation with Experimental ResultsProceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0106
  • Kuschel, M.; Seume, J.R. (2011): Influence of Unsteady Turbine Flow on the Performance of an Exhaust DiffuserProceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45673
    DOI: 10.1115/GT2011-45673
    ISBN: 978-0-7918-5467-9
  • Vorreiter, A.: Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R. (2010): Numerical Investigations of the Efficiency of Circulation Control in a Compressor StatorProceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22721
    DOI: 10.1115/GT2010-22721
    ISBN: 978-0-7918-4402-1
  • Herbst, F.; Biester, M. H.-O; Fiala, A.; Engel, K.; Seume, J.R. (2010): Validation of RANS-Modelling Approaches for Active Flow Control by Vortex Generating Jets in a Low-Pressure Turbine CascadeProceedings of the 8th International Symposium on Engineering Turbulence Modelling and Measurements – ETMM8, 9-11 June 2010, Marseille, France
  • Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2010): Tip Leakage in Small Radial Turbines – Optimum Tip-Gap and Efficiency Loss CorrelationsProceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22680
    DOI: 10.1115/GT2010-22680
    ISBN: 978-0-7918-4400-7
  • Alhaj, O.; Seume, J.R. (2010): Optical Investigation of Profile Loss in a Linear Turbine CascadeProceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-23166
    DOI: 10.1115/GT2010-23166
    ISBN: 978-0-7918-4402-1
  • Gómez, A.; Seume, J.R. (2009): Aerodynamic Coupling of Rotor and Tower in HAWTsProceedings of European Wind Energy Conference (EWEC), 16-19 March 2009, Marseille, France
  • Goltz, I.; Böhmer, H.; Nollau, R.; Belz, J.; Grueber, B.; Seume, J.R. (2009): Piezo-Electric Actuation of Rotor Blades in an Axial CompressorProceedings of 8th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria
  • Sadovnichiy, V.N.; Binner, M.; Seume, J.R. (2009): The Influence of Axial Gaps and Leaned-Twisted Guide Vanes on the Shroud Leackage and Turbine Stage EfficiencyProceedings of 8th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria
  • Gomez, A.; Seume, J.R. (2009): Modelling of Pulsating Loads on Wind Turbine BladesProceedings of the 3rd International Conference on Energy Sustainability, 19-23 July 2009, San Francisco, California, USA, ES2009-90121
    DOI: 10.1115/ES2009-90121
    ISBN: 978-0-7918-4890-6
  • Siemann, J.; Nollau, R.; Grüber, B.; Seume, J.R. (2009): Controlled Excitation of Rotor Blades via Macro Fiber Composites in an Axial CompressorProceedings of the 19th International Symposium on Air Breathing Engines, 7-11 September 2009, Montreal, Canada, ISABE-2009-1263
  • Früh, W.G.; Seume, J.R.; Gomez, A. (2008): Modelling the Aerodynamic Response of a Wind Turbine Blade Passing in Front of the TowerProceedings of European Wind Energy Conference (EWEC), 31 March - 3 April 2008, Brussels, Belgium, 163_EWEC2008
  • Sieker, O.; Seume, J.R. (2008): Effects of Rotating Blade Wakes on Separation and Pressure Recovery in Turbine Exhaust DiffusersProceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-50788
    DOI: 10.1115/GT2008-50788
    ISBN: 978-0-7918-4316-1
  • Guendogdu, Y.; Vorreiter, A.; Seume, J.R. (2008): Design of a Low Solidity Flow-Controlled Stator with Coanda Surface in a High Speed CompressorProceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-51180
    DOI: 10.1115/GT2008-51180
    ISBN: 978-0-7918-4316-1
  • Ziaei Rad, M.; Nouri-Broujerdi, A.; Seume, J.R. (2008): Numerical Computation of a Compressible Laminar Flow with Heat Transfer in the Entrance Region of a PipeProceedings of ASME Summer Heat Transfer Conference, 10-14 August 2008, Jacksonville, Florida, USA, HT2008-56199
    DOI: 10.1115/HT2008-56199
    ISBN: 978-0-7918-4849-4
  • Sieker, O.; Seume, J.R. (2007): Influence of Artificial Generated Rotating Wakes on Separating Behaviour of Annular DiffusersProceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July, 2007, Lyon, France ISAIF8-0054
  • Sadovnichiy, V.N.; Alhaj, O.; Binner, M.; Seume, J.R. (2007): CFD Models for Blade Tip and Diaphragm Gland Leakage Flow in Turbines of Disc-and Diaphragm DesignProceedings of 7th European Conference on Turbomachinery (ETC), Fluid Dynamics and Thermodynamics, 5-9 March 2007, Athens, Greece
  • Shaaban, S.; Seume, J.R. (2007): Aerodynamic Performance of Small Turbocharger CompressorsProceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27558
    DOI: 10.1115/GT2007-27558
    ISBN: 0-7918-4792-6
  • Herzog, N.; Binner, M.; Seume, J.R.; Rothe, K. (2007): Verification of Low-Flow Conditions in a Multistage TurbineProceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27328
    DOI: 10.1115/GT2007-27328
    ISBN: 0-7918-4795-0
  • Barchewitz, L.P.; Seume, J.R. (2007): Dynamic Modelling and Controls of an Air Supply System for In-Flight PEMProceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27900
    DOI: 10.1115/GT2007-27900
    ISBN: 0-7918-4792-6
  • Sieker, O.; Seume, J.R. (2007): Influence of Rotating Wakes on Separation in Turbine Exhaust DiffusersProceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July 2007, Lyon, France, ISAIF8-0054
  • Oehlert, K.; Seume, J.R.; Wang, B.; Denkena, B.; Hage, W.; Knobloch, K.; Meyer, R.; Siegel, F.; Ostendorf, A.; Vynnyk, T.; Reithmeier, E. (2007): Exploratory Experiments on Machined Riblets for 2-D Compressor BladesProceedings of ASME International Mechanical Engineering Congress & Exposition (IMECE), 11-15 November 2007, Seattle, Washington, USA, IMECE2007-43457
    DOI: 10.1115/IMECE2007-43457
    ISBN: 0-7918-4295-9
  • Imetovski. E.; Seume, J.R. (2007): Multi-Stage Effects of Bow and Sweep in a High-speed Axial CompressorProceedings of the International Gas Turbine Congress (IGTC), 2-7 Dec. 2007, Tokyo, Japan, IGTC2007-TS-049
  • Hellmich, B.; Seume, J.R. (2006): Causes of Acoustic Resonance in a High-Speed Axial CompressorProceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90947, (auch veröffentlicht in Journal of Turbomachinery, May 2008)
    DOI: 10.1115/GT2006-90947
    ISBN: 0-7918-4241-X
  • Goldhahn, E.; Seume, J.R. (2006): The Background Oriented Schlieren Technique: Sensitivity, Accuracy, Resolution and Application to a Three-Dimensional Density FieldProceedings of 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 26-29 June 2006, Lisbon, Portugal (auch veröffentlicht in Experiment in Fluids, July 2007)
  • Oehlert, K.; Seume, J.R. (2006): Exploratory Experiments on Machined Riblets on Compressor BladesProceedings of ASME 2nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093
    DOI: 10.1115/FEDSM2006-98093
    ISBN: 0-7918-4750-0
  • Oehlert, K.; Seume, J.R. (2006): Exploratory Experiments on Machined Riblets on Flat PlatesProceedings of ASME 2nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093
  • Fischer, K.; Seume, J.R. (2006): Location and Magnitude of Heat Sources in Solid Oxide Fuel CellsProceedings of 4th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97167 (auch veröffentlicht in Journal of Fuel Cell Science and Technology, February 2009)
    DOI: 10.1115/FUELCELL2006-97167
    ISBN: 0-7918-4247-9
  • Beil, A.; Seume, J.R. (2006): Unsteady Performance of a PEMFC System Including Autothermal Methane ReformingProceedings of 4th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97008
    DOI: 10.1115/FUELCELL2006-97008
    ISBN: 0-7918-4247-9
  • Braun, M.; Seume, J.R. (2006): Forward Sweep in a Four-Stage High-Speed Axial CompressorProceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90218
    DOI: 10.1115/GT2006-90218
    ISBN: 0-7918-4241-X
  • Barchewitz, L.P.; Seume, J.R. (2006): Conceptual Analysis of Air Supply Systems for In-Flight PEM-FCProceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90688
    DOI: 10.1115/GT2006-90688
    ISBN: 0-7918-4239-8
  • Schreyer, B.; Seume, J.R. (2005): The Loss Behaviour of Milled Turbine BladesProceedings of 6th Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC 6), 7-11 March 2005, Lille, France, Vol. 1, p. 210, AFT-020_03 / 124
  • Herzog, N.; Gündogdu, Y.; Kang, G.; Seume, J.R. (2005): Part Load Operation of a Four-Stage TurbineProceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68700
    DOI: 10.1115/GT2005-68700
    ISBN: 0-7918-4730-6
  • Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R. (2005): Improved Diffuser / Internal Volute Combinations for Centrifugal CompressorsProceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68894
    DOI: 10.1115/GT2005-68894
    ISBN: 0-7918-4730-6
  • Griebel, A.; Seume, J.R. (2005): The Influence of Variable Rotor-Stator Interaction on Boundary-Layer Development in an Axial CompressorProceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68902
    DOI: 10.1115/GT2005-68902
    ISBN: 0-7918-4730-6
  • Hellmich, B.; Seume, J.R. (2004): Acoustic Resonance in a Four-Stage High-Speed Axial CompressorProceedings of the 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 7-11 March 2004, Honolulu, Hawaii, ISROMAC10-2004-004
  • Fischer, A.; Riess, W.; Seume, J.R. (2003): Performance of Strongly Bowed Stators in a 4-Stage High Speed CompressorProceedings of the ASME Turbo Expo, 16-19 June 2003, Atlanta, Georgia, USA, GT-2003-38392
    DOI: 10.1115/GT2003-38392
    ISBN: 0-7918-3689-4
  • Hellmich, B.; Braun, M.; Fischer, A.; Seume, J.R. (2003): Observations on the Causal Relationship between Blade count and Developing Rotating Stall in a Four Stage Axial CompressorProceedings of 5th European Conference on Turbomachinery (ETC), 17-22 March 2003, Prague, Czech Republic
  • Fischer, A.; Seume, J.R. (2003): Comparison of Multistage CFD Calculations and Measurements in a high speed CompressorConference on Modelling Fluid Flow (CMFF' 03) The 12th International Conference on Fluid Flow Technologies, 3-6 September 2003, Budapest, Hungary
  • Harbecke, U.G.; Riess, W.; Seume, J.R. (2002): The Effect of Milling Process Induced Coarse Surface Texture on Aerodynamic Turbine Profile LossesProceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30333
    DOI: 10.1115/GT2002-30333
    ISBN: 0-7918-3610-X
  • Fleige, H.-U.; Riess, W.; Seume, J.R. (2002): Swirl and Tip Leakage Flow Interaction with Struts in Axial DiffusersProceedings of the ASME Turbo Expo 2002, 3-6 June, Amsterdam, The Netherlands, GT-2002-30491
    DOI: 10.1115/GT2002-30491
    ISBN: 0-7918-3610-X
  • Hellmich, B.; Fischer, A.; Reissner, A.; Runkel, J.; Seume, J.R. (2002): Estimation of the Rotating Frequency from Rotor Frequency and Common Blade Number Integer Fractions in a Four Stage Axial CompressorProceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 737-744
  • Johnson, T.; Becker, B.; Seume, J.R.; Termuehlen, H. (1997): First V84.3A Gas Turbine Installation at Hawthorn StationProceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357
    DOI: 10.1115/97-GT-357
    ISBN: 978-0-7918-7870-5
  • Hermann, J.; Hantschk, C.C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A.; Seume, J.R.; Vortmeyer, N.; Krause, W. (1997): Aktive Instabilitätskontrolle an einer 170 MW Gasturbine 18. Deutsch-Niederländischer Flammentag, 28-29 August 1997, Delft, Netherlands, VDI-Berichte 1313, pp. 337-344
  • Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A. (1997): Application of Active Combustion Instability Control to a Heavy Duty Gas TurbineProceedings of ASME Asia Congress and Exposition, 30 September – 02 October 1997, Singapore (auch veröffentlicht in Journal of Engineering for Gas Turbines and Power, October 1998)
  • Böhm, W.; Raake, D.; Regnery, D.; Seume, J.R.; Terjung, K. (1996): Testing the Model V84.3A Gas Turbine – Experimental Techniques and ResultsProceedings of International Gas Turbine and Aeroengine Congress and Exposition, 5-7 November 1996, Jakarta, Indonesia, ASME -Paper 96-TA-14
  • Janssen, M.; Mönig, R.; Seume, J.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E. (1994): The Model V 84.3 Shop Tests: Compressor Flow Field Measurements and EvaluationProceedings of International Gas Turbine and Aeroengine Congress and Exposition, 13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-462
  • Janssen, M.; Seume, J.R.; Zimmermann, H. (1994): The Model V 84.3 Shop Tests: Tip Clearance Measurements and EvaluationProceedings of International Gas Turbine and Aeroengine Congress and Exposition,13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-319
  • Seume, J.R.; Simon, T.W. (1987): Flow Oscillation Effects in Tubes and Porous Material: Unresolved IssuesBeitrag in: Morel, T.E., Dudenhoefer, J.E., Uzkan, T., Singh, P.J. (Hrsg.): Fluid Flow and Heat Transfer in Reciprocating Machinery. ASME Winter Annual Meeting, 1987, Boston, Massachusetts, USA, pp. 55-62 New York: American Society of Mechanical Engineers 1988

Internationale Konferenzbeiträge, nicht begutachtet

  • Mimic, D.; Jätz, C.; Oettinger, M.; Herbst, F.; Seehausen, H.; Kurth, S.; Frieling, D.; Zieße, M.; Seume, J. R. (2019): Improving Aerothermal and Aeromechanical Turbomachinery Design by Combining High-Fidelity Methods with Multi-Stage ApproachesProceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-PL3
  • Hain, R.; Fuchs, T.; Wein, L.; Kluge, T.; Seume, J.; Kähler, C. J. (2019): Stereoscopic PTV measurements in the housing/rotor cavity of a shrouded turbine rotorProceedings of the 13th International Symposium on Particle Image Velocimetry 2019
  • Schwerdt, L.; Willeke, T.; Huxdorf, O.; Krone, J.-H.; Friedrichs, J.; Riemenschneider, J.; Monner, H.P.; Seume, J.R. (2019): Active Flow Control in an Axial Compressor by Zero-Net-Mass-Flux ActuationProceedings of the 14th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows 8-11 July 2019, Gdansk, Poland, ISAIF14-084
  • Oettinger, M.; Prohaska, P.; Schwerdt, L.; Panning-von Scheidt, L.; Herbst, F.; Seume, J.R. (2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen AeroderivatenBeitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019 (Kraftwerkstechnisches Kolloquium, Dresden)
    ISBN: 3934409938
  • Henke, M.; Herbst, F.; Rätz, H.; Seume, J.R. (2018): A New Facility for Dynamic Turbomachinery and Wind-Tunnel TestingXXIV Biannual Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines
  • Bode, C.; Friedrichs, J.; Kellersmann, A.; Herbst, F.; Seume, J.R. (2018): Modeling Transient Aircraft Engine Operation13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA
  • Jätz, C.; Mimic, D.; Herbst, F.; Seume, J.R. (2018): Prediction Performance of the k-ε Elliptic-Blending Turbulence Model in Axial DiffusersProceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS48
  • Kurth, S.; Hamann, C.; Seume, J.R.; Mulleners, K. (2018): Experimental Investigation of the Influence of Anisotropic Surface Structures on the Boundary Layer Flow2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0585
    DOI: 10.2514/6.2018-0585
  • Narjes, G.; Kauth, F.; Müller, J.; Mertens, A.; Seume, J.R.; Ponick, B. (2018): High-Speed Permanent Magnet Synchronous Machine for Short-Term Operation in an Electrically Powered High-Lift SystemAIAA/IEEE Electric Aircraft Technologies Symposium, AIAA Propulsion and Energy Forum, 9-11 July 2018, Cincinnati, Ohio, USA, AIAA2018-4989
    DOI: 10.2514/6.2018-4989
  • Gilge, P.; Seume, J.R.; Mulleners, K. (2018): Analysis of Local Roughness Combinations on the Aerodynamic Properties of a Compressor Blade2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0345
    DOI: 10.2514/6.2018-0345
  • Gilge, P.; Seume, J.; Mulleners, K. (2018): Effect Of Surface Roughness On The Characteristic Length Scales In The Wake Of A Compressor Blade: A POD Analysis19th International Symposium on the Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 July 2018, Lisbon, Portugal
  • Hartmann, U.; Von der Haar, H.; Dinkelacker, F.; Seume, J.R. (2018): Experimental Defect Detection in a Swirl-Burner Arry Through Exhaust Jet Analysis2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0303
    DOI: 10.2514/6.2018-0303
  • Hauptmann, T.; Seume, J.R. (2018): Blade Vibration Measurements in a Multi-Stage Axial Turbine with Geometric Variations2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-0952
    DOI: 10.2514/6.2018-0952
  • Bittner, S.L.; Keller, C.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of a Forced Response Analysis Using a Time-Linearized MethodAIAA SciTech, 8-12 January 2018, Kissimmee, Florida, AIAA 2018-0461
    DOI: 10.2514/6.2018-0461
  • Mumcu, A; Thouault, N.; Seume, J.R. (2018): Aeroacoustic Testing for Sound Propagation through Turbine Vanes2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-1003
    DOI: 10.2514/6.2018-1003
  • Koepplin, V.; Seume, J.R.; Herbst, F. (2017): Investigation of Local Flow Phenomena of Misaligned Riblets in a Turbulent Boundary LayerEuropean Drag Reduction and Flow Control Meeting, 6 April 2017, Frascati, Rome, Italy. Weitere Informationen
  • Kauth, F.; Narjes, G.; Müller, J.; Seume, J.R.; Vasista, S.; Müller, T.; Francois, D.G.; El Sayed M., Y.; Semaan, R.; Behr, C.; Schwerter, M.; Leester-Schädel, M.; Nolte, F.; Giesecke, D.; Atalayer, C.; Radespiel, R. (2017): Progress in Efficient Active High-Lift, 35th AIAA Applied Aerodynamics ConferenceAIAA AVIATION Forum, 5-9 June 2017, Denver, Colorado
    DOI: 10.2514/6.2017-3559
  • Siemann, J.; Schwerdt, L.; Willeke, T.; Seume, J.R. (2017): Active Flow Control by Aspiration and Injection in Multi-Stage Axial CompressorsTechnical Keynote at Global Power & Propulsion Inaugural Forum, Zurich, Switzerland, 16-18 January 2017
  • Burgmann, S.; Fischer, T.; Rudersdorf, M.; Seume, J.R. (2016): Entwicklung eines Kleingebläses mit querschnittsvariablem Diffusor und Volute zur Wirkungsgradsteigerung im Teillastbetrieb24. Fachtagung „Lasermethoden in der Strömungsmesstechnik“, 6-8 Sept. 2016, Cottbus
    ISBN: 978-3-9816764-2-6
  • Fischer, T.; Seume, J.R. (2016): Low Inertia Centrifugal Compressor Wheels: Aerodynamic and Mechanical DesignIEEE Conference Publications, 2016 International Conference on Applied System Innovation (ICASI)
    DOI: 10.1109/ICASI.2016.7539797
  • Neuhaus, L.; Gilge, P.; Seume, J.R.; Mulleners, K. (2016): Influence of Surface Roughness on the Turbulent Properties in the Wake of a Turbine Blade18th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 4-7 July 2016, Lisbon, Portugal
  • Ernst, B.; Seume, J.R.; Herbst, F. (2016): Probabilistic CFD-Analysis of Regeneration-Induced Geometry Variances in a Low-Pressure Turbine52nd AIAA/SAE/ASEE Joint Propulsion Conference 2016, AIAA Propulsion and Energy Forum, 25-27 July 2016, Salt Lake City, Utah, USA, AIAA 2016-4555
    DOI: 10.2514/6.2016-4555
  • Mai, H.; Rätz, H.; Weigl, S.; Kunte, H.S.; Willers, O.; Nascimento, D.; Seume, J.R. (2016): Design and development of a component test bench for the investigation of automotive ORC systems16th Stuttgart International Symposium, FKFS, 15-16 March 2016, Stuttgart; proceedings pp. 1495-1514, Springer, Wiesbaden
    DOI: 10.1007/978-3-658-13255-2_110
  • Kauth, F., Narjes, G., Müller, J., Mertens, A., Ponick, B., and Seume, J.R. (2016): Highly Integrated Electrically Driven Active High-Lift Compressor Systems for Future Civil AircraftGreener Aviation Conference, 11-13 October 2016, Brussels, Belgium
  • Kunte, H.; Seume, J.R. (2015): Experimental Setup of a small supersonic Turbine for an Automotive ORC Application running with Ethanol3rd International Seminar on ORC Power Systems, City of Brussels, Belgium
  • Samarbakhsh, S.; Meinzer, C.E.; Laumert, B.; Seume, J.R. (2015): On Non-Synchronous Vibrations: Lock-In Effects of an Eccentrically Rotating CylinderProceedings of the 14th International Symposium on Unsteady Aerodynamics, Aeroacoustics&Aeroelasticity of Turbomachines, ISUAAAT 14, 8-11 September 2015, Stockholm, Sweden
  • Hauptmann, T.; Aschenbruck, J.; Christ, P.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2015): Influence of Combustion Chamber Defects on the Forced Response Behavior of Turbine BladesProceedings of the 14th International Symposium on Unsteady Aerodynamics, Aeroacoustics & Aeroelasticity of Turbomachines, ISUAAAT14, 8-11 September 2015, Stockholm, Schweden
  • Teichel, S.; Radespiel, R.; Burnazzi, M.; Dietzel, A.; Leester-Schädel, M.; Schwerter, M.; Sinapius, M.; Behr, C.; Monner, H.P.; Rudenko, A.; Horst, P.; Schmitz, A.; Ponick, B.; Dörbaum, M.; Mertens, A.; Merkert, A.; Friedrichs, J.; Atalayer, Ç.; Seume, J.R. (2015): SFB 880 - Efficient High LiftProceedings of 5th International Workshop on Aircraft System Technologies, 24-25 March 2015, Hamburg, Germany, Shaker, Aachen
    ISBN: 978-3-8440-3319-9
  • Wolff, T.; Seume, J.R. (2015): Airfoil with Morphing Trailing Edge for Load Reduction in Wind Turbines33rd Wind Energy Symposium, AIAA Scitech, 5-9 January 2015, Kissimmee, FL/USA, AIAA 2015-1662
    DOI: 10.2514/6.2015-1662
  • Hartmann, U.; Adamczuk, R.; Seume, J.R. (2015): Tomographic Background Oriented Schlieren Applications for Turbomachinery53rd AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 5-9 January 2015, Kissimmee, Florida, AIAA2015-1690
    DOI: 10.2514/6.2015-1690
  • Asche, D.; Lietmeyer, C.; Schwerdt, L.; Seume, J.R. (2014): Particle Concentration and Velocity Measurements in a Cascade Wind Tunnel by Means of L2FXXII Biannual Symposium on Measuring Techniques in Turbomachinery, 4-5 September 2014, Lyon, France, MTT2214-A513
  • Brand, C.R.; Seume, J.R. (2014): Flaps for Wind Turbine Application: Noise Source Localization on a Test AirfoilProceedings of the 10th PhD Seminar on Wind Energy in Europe, October 28-31, 2014, Orléans, France
  • Brand, C.R.; Seume, J.R. (2014): Flaps for Wind Turbine Applications: First Results of the Experimental InvestigationsWind Turbine Sound 2014 - EWEA Technology Workshop, Malmö, Sweden
  • Winstroth, J.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: Assessment on a Scaled Model32nd ASME Wind Energy Symposium, 13-17 January 2014, National Harbor, Maryland
  • Winstroth, J.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: 3D Simulation of the Experimental SetupEWEA 2014, 10-13 March 2014, Barcelona, Spain
  • Wolff, T.; Seume, J.R. (2014): Numerical Investigation of an Airfoil with Morphing Trailing Edge for Load ReductionProceedings of the 10th PhD Seminar on Wind Energy in Europe, October 28-31, 2014, Orléans, France
  • Adamczuk, R.; Hartmann, U.; Seume, J. (2014): Application of the Background-Oriented Schlieren Method for the Analysis of an Engine’s Exhaust JetXXII Biannual Symposium on Measuring Techniques in Turbomachinery, 4-5 September 2014, Lyon, France, MTT2214-A514
  • Laguna, J.D.; Bartelt, M.; Seume J.R. (2013): Radial Mode Analysis in an Aero-Acoustic Wind TunnelAIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy – Veröffentlichung und Posterbeitrag
  • Kunte, H.; Seume J.R. (2013): Partial Admission Impulse Turbine for Automotive ORC Application11th International Conference on Engines & Vehicles, Capri/Neapel, Italy
    DOI: 10.4271/2013-24-0092
  • Sadovnichiy, V. N.; Drechsel, B.; Seume, J.R. (2013): Influence of Swirl Flow on Distribution of Loss Components in Axial Annular-Conical DiffusersProceedings of 11th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 6-11 May 2013, Shenzen, China
  • Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Assessment of Defects and Damage in Jet EnginesInternational Conference MRO Maintenance, Repair and Overhaul, 2013, Berlin
  • Ernst, B.; Seume, J.R. (2013): Modelling Structural Uncertainty of Wind Turbine Rotor Blades for Aeroelastic InvestigationsSeventh M.I.T. Conference on Computational Fluid and Solid Mechanics - Focus: Multiphysics & Multiscale, June 12-14, 2013, Massachusetts Institute of Technology, Cambridge, MA 02139 USA
  • Witthaus, S.; Bartelt, M.; Seume, J.R. (2013): Sensitivity Study of the Sound Radiation of Aircraft Engine Compressors According to Different Inlet ConditionsAIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy
  • Teichel, S.H.; Verstraete, T.; Seume, J.R. (2013): Optimized Preliminary Design of Compact Axial Compressors: A Comparison of Two Design Tools31st AIAA Applied Aerodynamics Conference, 24-27 June 2013, San Diego, USA, AIAA-2013-2651
  • Meinzer, C.E.; Freund, O.; Seume J.R. (2013): Design and Operation of an Acoustic System for Traveling Wave ExcitationAIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy
  • Biester, M. H.-O.; Gündogdu, Y.; Seume, J.R. (2013): Clocking Effects on Surface-Pressure Fluctuations for Variable Axial-Gaps21st AIAA Computational Fluid Dynamics Conference, 24-27 June 2013, San Diego, USA. AIAA-2013-2955
    DOI: 10.2514/6.2013-2955
  • Laguna, J.; Bartelt, M.; Drechsel, B.; Seume, J.R. (2012): Entwicklung einer variablen Messeinheit für Schallfeldanalysen in Turbomaschinen38. Jahrestagung für Akustik – DAGA 2012, Darmstadt
  • Ernst, B.; Gònzales, A.; Bloh, M.; Seume, J.R. (2012): Implementation of the Cuckoo Search Algorithm to Optimize the Design of Wind Turbine Rotor BladesProceedings of the EWEA Annual Event, 16-19 June 2012, Copenhagen, Denmark
  • Seume, J.R.; kleine Sextro, T. (2012): The Potential of Variable Inlet Guide Vanes for Turbocharger Compressors4th International Congress on Advanced Downsizing & Turbocharging Concepts, 26-28 March 2012, Stuttgart, Germany
  • Lin, S.Y.; Mulleners, K.; Seume, J.R. (2012): Effect of Spinner Geometry on the Flow Near the Hub of Modern Wind TurbinesProceedings of 8th PhD Seminar on Wind Energy in Europe, September 12-13, 2012, ETH Zurich, Switzerland - Posterbeitrag
  • Winstroth, J.; Seume, J.R. (2012): New Test Bench for Optical Measurements of Rotor Blade Deformations on Wind TurbinesProceedings of 8th PhD Seminar on Wind Energy in Europe, September 12-13, 2012, ETH Zurich, Switzerland
  • Bartelt, M; Freund, O.; Seume, J.R.; Panning-von Scheidt, L.; Röhle, I.; Buske, C. (2012): Aeroakustik & Aeroelastik der Strömungsmaschinen – Eine Vorlesung als Reaktion auf aktuelle Anforderungen der Turbomaschinenentwicklung38. Jahrestagung für Akustik – DAGA 2012, 19.-22. März 2012, Darmstadt
  • Biester, M. H.-O.; Henke, M.; Seume, J.R. (2011): Numerically Optimized Design of a 1.5-Stage Turbine Test-Rig InstrumentationWorkshop of the DGLR-Section Thermo- and Fluid-Dynamics, CFD and Experiment – Integration of Simulation, Göttingen, Germany
  • Seume, J.R.; Kammeyer, J.; Natkaniec, C. (2011): Turbocompressor and Turbine Design for Downsizing Applications3rd International Conference on Downsizing and Turbocharging Concepts, 9-11 March 2011, Wiesbaden, Germany
  • von Seggern, H.G.; Seume, J.R. (2011): Numerical Study of Aerosol Generation in the Deep Human Lung – Fluence of Chronic Lung InjuriesProceedings of international 18th Congress of the International Society for Aerosols in Medicine, 18-22 June 2011, Rotterdam, the Netherlands
  • Eilts, P.; Herbst, F.; Kammeyer, J.; Natkaniec, C.; Porzig, D.; Sextro, T.; Schwarze, H.; Seume, J.R.; Stöber-Schmidt, C.-P. (2011): The Potential of Variable Compressor Geometry for Highly Boosted Gasoline EnginesSAE World Congress & Exhibition, 12-14 April 2011, Detroit, USA, 11PFL-0413
    DOI: 10.4271/2011-01-0376
  • von Seggern, H.G.; Haslbeck, K.; Seume, J.R. (2011): Numerical Study of Aerosol Generation in the Deep Human LungProceedings of 10th International Symposium on Experimental and Computationel Aerothermodynamics of Internal Flows (ISAIF), 4-7 June 2011, Brussels, Belgium
  • Adamczuk, R.; Aschenbruck, J.; Bartelt, M.; Herbst, F.; Seume, J.R. (2011): Inverse Methods in Turbomachinery ApplicationsAachen Conference on Computational Engineering Science, ACCES 2011, Aachen
  • Natkaniec, C.K.; Kammeyer, J.; Seume, J.R. (2011): Influence of Variable Nozzle Geometry on Radial Turbine PerformanceProceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0112
  • Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2010): Influence of Tip-Gap Losses on the Stage Efficiency of Downsizing Turbocharger TurbinesProceedings of 9th International Conference on Turbochargers and Turbocharging (IMechE), 19-20 May 2010, London, UK
  • Kammeyer, J.; Seume, J.R. (2010): Gasturbine Range Extender – Serial Full HybridIZB 2010 Workshop, October 7, Wolfsburg
  • Bartelt, M.; Mohseni, A.; Opilat, V.; Seume, J.R. (2009): Endoscopic Stereoscopic PIV Measurements in TurbomachinesPosterbeitrag International Symposium on 25 Years of Particle Image Velocimetry in Aerodynamics, 23-25 September 2009, Göttingen, Germany
  • Kleppa, O.; Barchewitz, L.P.; Seume, J.R. (2009): Conceptual Analysis, Dynamic Modelling and Controls of an Air Supply System for In-Flight Proton Exchange Membrane Fuel Cells (PEM-FC)Proceedings of 2nd International Workshop on Aircraft System Technologies, 26-27 March 2009, Hamburg, Germany
  • Haslbeck, K.; Seume, J.R. (2009): Aerosol Formation in the Alveoli – in Search of Sensitive Parameters Using Computational Fluid DynamicsProceedings of 17th International Congress of the International Society for Aerosols in Medicine, 10-14 May 2009, Monterey, California, USA, Abstract in the Journal of Aerosol Medicine and Pulmonary Drug Delivery, Vol. 22, Issue 2, p. 204
  • Kuschel, M.; Seume, J.R. (2009): Influence of the wakes of Rotating Spokes on the Performance of a Turbine Exhaust DiffuserProceedings of 9th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF9), 8-11 September 2009, Gyeongju, Korea, Paper No. isaif9-055
  • (2008): Numerical Analysis of the Formation Process of Aerosols in the Alveoli61st Annual Meeting of the APS Division of Fluid Dynamics, 23-25 November 2008, San Antonio, Texas, USA, Abstract in the Bulletin of the American Physical Society Vol. 53, Issue 15, p. 115
  • Gómez, A.; Seume, J.R. (2008): Rotor-Tower Interaction in HAWTsProceedings of 4th PhD Seminar on Wind Energy in Europe, 1-2 October 2008, Magdeburg, Germany
  • Henke, M; Guendogdu, Y.; Seume, J.R.; Siewert, C.; Panning, L.; Wallascheck J. (2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of Turbine BladingProceedings of 9th International Conference on Vibrations in Rotating Machinery (IMechE), 08.- 10. September 2008, Exeter, UK
  • Beil, A.; Seume, J.R. (2006): Conceptual Analysis and Preliminary Design of a Centrifugal Compressor for an In-flight PEMFC Air Supply SystemH2-Expo, International Conference and Trade Fair on Hydrogen and Fuel Cell Technologies, 25-26 October 2006, Hamburg, Germany
  • Seume, J.R.; Herbst, F.; Missirlis, D.; Yakinthos, K.; Goulas, A. (2006): Numerical Model of the Unsteady Interaction between Probe and Flow in Axial TurbomachineryXVIII Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines, 21-22 September 2006, Thessaloniki, Greece
  • Shaaban, S.; Seume, J.R.; Berndt, R.; Pucher, H.; Linnhoff, H.-J. (2006): Part-Load Performance Prediction of Turbocharged EnginesProceedings of 8th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2006, London, UK, C647/019
  • Shaaban, S.; Seume, J.R. (2006): Analysis of Turbochargers Non-Adiabatic PerformanceProceedings of 8th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2006, London, UK, C647/027
  • Kang, G.; Seume, J.R.; Gündogdu, Y.; Herzog, N.; Rothe, K. (2005): Development of a Measuring Technique for the Investigation of Windage Phenomena in a Four-Stage Air TurbineProceedings of 7th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 11-15 September 2005, Tokyo, Japan, Vol. 1, pp. 31-36
  • Pietrasch, R.Z.; Seume, J.R. (2005): Interaction between Struts and Swirl Flow in Gas Turbine Exhaust DiffusersProceedings of 7th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 11-15 September 2005, Tokyo, Japan, Vol. 1, pp. 37-42
  • Hagelstein, D.; Beyer, B.; Seume, J.R.; Rautenberg, M.; Hasemann, H. (2002): Heuristical View on the Non-Adiabatic Coupling System of Combustion Engine and TurbochargerProceedings of 7th International Conference on Turbochargers and Turbocharging (IMechE), 14-15 May 2002, London, UK, pp. 349-360
  • Janssen, M.; Seume, J.R.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E. (1993): Flow Field Analysis of the Axial Compressor of the Siemens V84.3.20th International Congress on Combustion Engines (CIMAC), 1993, London, UK
  • Beale, W.T.; Seume, J.R. (1989): Solar-Powered Free-Piston Stirling Generator4. Jahreskongress des International Hightech-Forum Basel „Umwelt und regenerative Energie-Sonnenenergie und solarer Wasserstoff“, 30 November - 01 December 1989, Basel, Switzerland
  • Seume, J.R.; Simon, T.W. (1988): Effect of Transition on Oscillating Flow Losses in Stirling Engine Coolers and Heaters23th Intersociety Energy Conversion Engineering Conference, 1988, New York, New York, USA, pp. 127-132
  • Goldberg, L.F.; Seume, J.R.; Simon, T.W. (1987): Description of an Oscillating Flow Test Program22th Intersociety Energy Conversion Engineering Conference, 1987, New York, New York, USA, pp. 1753-1758
  • Seume, J.R.; Simon, T.W. (1986): Oscillating Flow in Stirling Engine Heat Exchangers21th Intersociety Energy Conversion Engineering Conference, 1986, Washington D.C., USA, pp. 533-538

Internationale wissenschaftliche Beiträge in Fachzeitschriften, begutachtet

  • Oettinger, M.; Mimic, D.; Henke, M.; Schmunk, O.; Seume, J.R. (2021): Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure TurbineJournal of the Global Power and Propulsion Society, 5, 1-14
    DOI: 10.33737/jgpps/127834
  • Oettinger, M.; Wein, L.; Mimic, D.; Gilge, P.; Hartmann, U.; Seume, J.R. (2021): Automated detection of hot-gas path defects by Support Vector Machine based analysis of exhaust density fieldsJournal of the Global Power and Propulsion Society, Special Issue: Data-driven modelling and high-fidelity simulations, 1-16
    DOI: 10.33737/jgpps/137952
  • Goeing, J.; Seehausen, H.; Pak, V.; Lueck, S.; Friedrichs, J.; Seume, J.R. (2020): Influence of combined compressor and turbine deterioration on the overall performance of a jet engine using RANS simulation and Pseudo Bond Graph approachJournal of the Global Power and Propulsion Society
    DOI: 10.33737/jgpps/131109
  • Lehnhoff, S.; Gómez G.A.; Seume, J.R. (2020): Full-scale deformation measurements of a wind turbine rotor in comparison with aeroelastic simulationsWind Energy Science 5, S. 1411-1423
    DOI: 10.5194/wes-5-1411-2020
  • Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R (2020): Greater efficiency thanks to smaller gaps – investigations on pressure distribution in the impeller backplane cavity of a high speed centrifugal compressorPumps and Compressors for the World Market 2020, VDMA-Verlag, pp. 66-72
  • Gilge, P.; Mulleners, K.; Seume, J.R. (2020): Experimental Analysis of Multiscale Vortex Shedding in Turbulent Turbomachine Blade WakesAIAA Journal
    DOI: 10.2514/1.J059476
  • Eggers, T.; Kim, H.R.; Bittner, S.; Friedrichs, J.; Seume, J.R. (2020): Aerodynamic and Aeroelastic Effects of Design-Based Geometry Variations on a Low-Pressure CompressorInternational Journal of Turbomachinery Propulsion and Power 2020, 5(4), 26
    DOI: 10.3390/ijtpp5040026
    ISBN: 2504-186X
  • Meinzer, C. E.; Seume, J. R. (2020): Experimental and Numerical Quantification of the Aerodynamic Damping of a Turbine BliskASME. J. Turbomach
    DOI: 10.1115/1.4048192
  • Willers, O.; Valstar, F.; kleine Sextro, T.; Flinte, J.; Fischer, T.; Eilts, P.; Seume, J.R. (2019): Erhöhung des Low-End-Torque eines Ottomotors durch Querschnittsvariation des TurboladerverdichtersSpringer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature 2020 J. Liebl (Hrsg.): Experten-Forum Powertrain: Ladungswechsel und Emissionierung 2019, Proceedings, S. 57–70, 2020.
    DOI: 10.1007/978-3-658-28709-2_5
    ISBN: 978-3-658-28709-2
  • Gilge, P.; Kellersmann, A.; Friedrichs, J.; Seume J.R. (2019): Surface roughness of real operationally used compressor blade and bliskProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 233(14), S. 5321–5330
    DOI: 10.1177/0954410019843438
  • Miro, S.; Willeke, T.; Broggi, M.; Seume, J. R.; Beer, M. (2019): Reliability Analysis of an Axial Compressor Based on One-Dimensional Flow Modeling and Survival SignatureASME. ASME J. Risk Uncertainty Part B. 2019;():
    DOI: 10.1115/1.4043150
  • Flinte, J.; kleine Sextro, T.; Eilts, P.; Seume, J.R. (2018): Potentials of Variable Cross Section Compressor Regarding Surge Line and Compressor Efficiency Using Engine Test Bench Measurements and Engine Process SimulationCO2 Reduction for Transportation Systems Conference, SAE Technical Paper, SAE International, USA
    DOI: 10.4271/2018-37-0004
  • Liu, X.; Willeke, T.; Herbst, F.; Yang, J.; Seume, J.R. (2018): A Theory on the Onset of Acoustic Resonance in a Multistage CompressorJ. Turbomach 140(8), 081003 (Jul 24, 2018) (12 pages)
    DOI: 10.1115/1.4040551
  • Goldmann, A.; Sauter, W.; Oettinger, M.; Kluge, T.; Schröder, U.; Seume, J.R.; Friedrichs, J.; Dinkelacker, F. (2018): A Study on Electrofuels in AviationEnergies 2018, Vol. 11(2), 392
    DOI: 10.3390/en11020392
  • Burgmann, S.; Fischer, T.; Rudersdorf, M.; Roos, A.; Heinzel, A.; Seume, J.R. (2018): Development of a Centrifugal Fan with Increased Part-Load Efficiency for Fuel Cell ApplicationsRenewable Energy, Volume 116, Part A, February 2018, Pages 815-826
    DOI: https://doi.org/10.1016/j.renene.2017.09.075
  • Mueller, J.-K.; Bensmann, A.; Bensmann, B.; Fischer, T.; Kadyk, T.; Narjes, G.; Kauth, F.; Ponick, B.; Seume, J.; Krewer, U.; Hanke-Rauschenbach, R.; Mertens, A. (2018): Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift SystemsEnergies 11(1), 179
    DOI: 10.3390/en11010179
  • Müller-Schindewolffs, C.; Baier, R.-D.; Seume, J.R.; Herbst F. (2017): Direct Numerical Simulation Based Analysis of RANS Predictions of a Low-Pressure Turbine CascadeJ. Turbomach 139(8), 081006, Mar 21, 2017,11 pages
    DOI: 10.1115/1.4035834
  • Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R. (2017): Correcting Turbocharger Performance Measurements for Heat Transfer and FrictionJ. Eng. Gas Turbines Power 140(2), 022301 (Oct 03, 2017) (9 pages)
    DOI: 10.1115/1.4037586
  • Gilge, P.; Hohenstein, S.; Seume, J.R. (2017): Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine BladeInternational Journal of Gas Turbine, Propulsion and Power Systems, October 2017, Volume 9, Number 3, pp.12-21
    DOI: 10.38036/jgpp.9.3_12
  • Seume, J.R.; Peters, M.; Kunte, H. (2017): Design and test of a 10kW ORC supersonic turbine generatorJournal of Physics: Conference Series, Volume 821, Number 1, 12023
    DOI: 10.1088/1742-6596/821/1/012023
  • Teichel, S.; Verstraete, T.; Seume, J.R. (2017): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift SystemsInternational Journal of Gas Turbine, Propulsion and Power Systems, June 2017, Volume 9, Number 2, pp. 19-26
    DOI: 10.38036/jgpp.9.2_19
  • Hauptmann, T.; Aschenbruck, J.; Seume, J.R. (2017): Forced Response Excitation due to Stagger Angle Variation in a Multi-Stage Axial TurbineInternational Journal of Gas Turbine, Propulsion and Power Systems, October 2017, Volume 9, Number 3
    DOI: 10.38036/jgpp.9.3_1
  • Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern AnalysisJ. Eng. Gas Turbines Power 139(3), 031504 (Sep 27, 2016) (8 pages)
    DOI: 10.1115/1.4034449
  • Hartmann, U.; Seume, J.R. (2016): Combining ART and FBP for Improved Fidelity of Tomographic BOSJournal of Measurement Science and Technology, Vol. 27, No. 9, 097001 (10 pages)
    DOI: 10.1088/0957-0233/27/9/097001
  • Wiegmann, B.; Seggern, H. von; Höffler, K.; Korossis, S.; Dipresa, D.; Pflaum, M.; Schmeckebier, S.; Seume, J.R.; Haverich, A. (2016): Developing a biohybrid lung – sufficient endothelialisation of poly-4-methly-1-pentene gas exchange hollo-fiber membranesJournal of the Mechanical Behaviour of Biomedical Materials, Vol. 60, July 2016, pages 301-311
    DOI: 10.1016/j.jmbbm.2016.01.032
  • Drechsel, B.; Seume, J.R.; Herbst, F. (2016): On the Numerical Prediction of the Influence of Tip Flow on Diffuser StabilityInternational Journal of Gas Turbine, Propulsion and Power Systems (JGPP), December 2016, Volume 8, Number 3
    DOI: 10.38036/jgpp.8.3_29
  • Grönmann, A.; Biester, M.; Turunen-Saaresti, T.; Jaatinen-Värri, A.; Backmann, J.; Seume, J.R. (2015): Importance of the Vane Exit Mach Number on the Axial-Clearance-Related LossesProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol 230, Issue 2, pp. 175 - 183
    DOI: 10.1177/0957650915623087
  • Teichel, S.H.; Dörbaum, M.; Misir, O.;Merkert, A.; Mertens, A.; Seume, J.R.; Ponick, B. (2014): Design Considerations for the Components of Electrically Powered Active High-Lift Systems in Civil AircraftCEAS Aeronautical Journal: Volume 6, Issue 1 (2015), pp. 49-67
    DOI: 10.1007/s13272-014-0124-1
  • Freund, O.; Montgomery, M.; Mittelbach, M.; Seume, J.R. (2014): Non-Contact Test Set-Up for Aeroelasticity in a Rotating Turbomachine Combining a Novel Acoustic Excitation System with Tip-TimingJournal of Measurement Science and Technology Vol. 25, No. 3, 035008
    DOI: https://doi.org/10.15488/390
  • Binner, M.; Seume, J.R. (2014): Flow Patterns in High Pressure Steam Turbines During Low-Load OperationJ. Turbomach 136(6), 061010 (Nov 21, 2013) (12 pages)
    DOI: 10.1115/1.4025162
  • Adamczuk, R.R.; Luehrmann, J.; Seume, J.R. (2014): Methodology for Evaluating Hot Gas Path Defects in an Exhaust JetJournal of Aerospace Science and Technology. December 2014, Vol. 39, pp. 120-127
    DOI: 10.1016/j.ast.2014.08.011
  • Herbst, F.; Fiala, A.; Seume, J.R. (2014): Modeling Vortex Generating Jet-Induced Transition in Low-Pressure TurbinesJ. Turbomach 136(7), 071005 (Jan 02, 2014) (16 pages)
    DOI: 10.1115/1.4025735
  • Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.M.; Seume, J.R. (2013): Impact of the Flow on an Acoustic Excitation System for Aeroelastic StudiesJ. Turbomach 135(3), 031033 (Mar 25, 2013) (9 pages)
    DOI: 10.1115/1.4007511
  • Seume, J.R.; Pourshaghaghy, A. (2013): Estimation of Surface Heat Flux in the Wind Tunnel Cascade BladesScientific Journal for Fundamentals and Applications of Engineering Mechanicals, 2013, Vol. 33, Issue 1, pp. 52-66
  • Lietmeyer, C.; Oehlert, K.; Seume, J.R. (2013): Optimal Application of Riblets on Compressor Blades and their Contamination BehaviourJ. Turbomach 135(1), 011036 (Oct 31, 2012) (10 pages)
    DOI: 10.1115/1.4006518
  • Herbst, F.; Kozulovic, D.; Seume, J.R. (2013): Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine ProfilesJ. Turbomach 135(1), 011038 (Oct 31, 2012) (8 pages)
    DOI: 10.1115/1.4006421
  • Adamczuk, R.; Seume, J.R. (2012): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet ConditionsInternational Journal of Gas Turbine, Propulsion and Power Systems, June 2012, Volume 4, Number 2
    DOI: https://doi.org/10.38036/jgpp.4.2_1
  • Shaaban, S.; Seume, J.R. (2012): Impact of Turbocharger Non-Adiabatic Operation on Engine Volumetric Efficiency and Turbo LagInternational Journal of Rotating Machinery, vol. 2012, Article ID 625453, 11 pages
    DOI: 10.1155/2012/625453
  • Fischer, K.; Seume, J.R. (2012): Thermo-Mechanical Stress in Tubular Solid Oxide Fuel Cells: Part II-Operating Strategy for Reduced Probability of Fracture FailureIET Renewable Power Generation, June 2012, Vol. 6, issue 3, pp. 194-205, ISSN: 1752-1424
    DOI: 10.1049/iet-rpg.2011.0109
  • Fischer, K.; Seume, J.R. (2012): Thermo-Mechanical Stress in Tubular Solid Oxid Fuel Cells: Part I-Transient Operating Behavior and the Relevance of Material CreepIET Renewable Power Generation(2012),6(3):177
    DOI: 10.1049/iet-rpg.2011.0095
  • Ernst, B.; Seume, J.R. (2012): Investigation of Site-Specific Wind Field Parameters and Their Effect on Loads of Offshore Wind TurbinesEnergies. 2012; 5(10):3835-3855, ISSN: 1996-1073
    DOI: 10.3390/en5103835
  • Mohseni, A.; Goldhahn, E.; Van den Braembussche, R. A.; Seume, J.R. (2012): Novel IGV Designs for Centrifugal Compressors and their Interaction with the ImpellerJ. Turbomach 134(2), 021006 (Jun 22, 2011) (8 pages)
    DOI: 10.1115/1.4003235
  • Vorreiter, A.; Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R. (2012): Numerical Investigations of the Efficiency of Circulation Control in a Compressor StatorJ. Turbomach 134(2), 021012 (Jun 27, 2011) (11 pages)
    DOI: 10.1115/1.4003286
  • Haslbeck, K.; Schwarz, K.; Hohlfeld, J.M.; Seume, J.R.; Koch, W. (2010): Submicron Droplet Formation in the Human LungJournal of Aerosol Science, Vol. 41, Issue 5, pp. 429-438
    DOI: 10.1016/j.jaerosci.2010.02.010
  • Gomez, A.; Seume, J.R. (2009): Load Pulses on Wind Turbine Structures Caused by Tower InterferenceWind Engineering, Vol. 33, Issue 6, pp. 555-570
    DOI: 10.1260/0309-524X.33.6.555
  • Nouri-Borujerdi, A.; Ziaei-Rad, M.; Seume, J.R. (2009): Numerical Simulation of Developing Compressible Turbulent Flow with Heat TransferJournal of Thermophysics and Heat Transfer, Vol. 23, No. 4 (2009), pp. 801-809.
    DOI: 10.2514/1.41669
  • Fischer, K.; Seume, J.R. (2009): Impact of the Temperature Profile on Thermal Stress in a Tubular Solid Oxide Fuel CellJ. Fuel Cell Sci. Technol 6(1), 011017 (Nov 12, 2008) (9 pages)
    DOI: 10.1115/1.2971132
  • Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R. (2008): Improved Diffuser / Volute Combinations for Centrifugal CompressorsJ. Turbomach 130(1), 011014 (Jan 25, 2008) (9 pages)
    DOI: 10.1115/1.2749296
  • Fischer, A; Rieß, W; Seume, J.R. (2004): Performance of Strongly Bowed Stators in a Four-Stage High Speed CompressorJ. Turbomach 126(3), 333-338 (Sep 03, 2004) (6 pages)
    DOI: 10.1115/1.1649743
  • Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A. (1998): Application of Active Combustion Instability Control to a Heavy Duty Gas TurbineJournal of Engineering for Gas Turbines and Power, Vol. 120, Issue 4, pp. 721-726
    DOI: 10.1115/1.2818459

Internationale wissenschaftliche Beiträge in Fachzeitschriften, nicht begutachtet

  • Willers, O., Seume, J.R., Zeh, C., Schwarze, H. (2021): Thermal Influence on the Overall TC System with Consideration of the Coupled BearingsThermal Influence on the Overall TC System with Consideration of the Coupled Bearings. MTZ Worldw 82, S. 56–60
    DOI: https://doi.org/10.1007/s38313-020-0609-8
  • Flinte, J.; Eilts, P.; Willers, O.; Seume, J.R. (2020): Extension of the Characteristic Map of a TC Compressor by active Cross-Section VariationMTZ worldwide, S. 68-72
    DOI: 10.1007/s38313-019-0166-1
    ISSN: 2192-9114
  • Henke, M.; Rätz, H.; Fleige, H.-U.; Seume, J.R. (2019): Preparation of Acceptance Tests for a New Turbomachinery Test Facility9th EVI-GTI International Gas Turbine Instrumentation Conference, 20th and 21th Nov 2019, Graz, Austria
  • Menze, M.; Schödel, M.; Willers, O.; Seume, J. R.; (2019): Brennstoffzellensysteme im Straßenverkehr als Antriebskonzept für die Mobilität der ZukunftJournal für Mobilität und Verkehr, Ausgabe 3
    DOI: 10.34647/jmv.nr3.id24
    ISBN: 2628-4154
  • Willers, O.W.; Kunte, H.; Seume, J.R. (2017): ORC turbine-generator unit for truck applicationsAutomobiltechnische Zeitschrift (ATZ) Worldwide, Vol. 119, October 2017, pages 58-61, Springer, Wiesbaden
    DOI: 10.1007/s38311-017-0095-z
  • Hohenstein, S.; Aschenbruck, J.; Seume, J.R (2013): Einfluss betriebs- und regenerationsbedingter Varianzen von TurbinenschaufelnInternational Journal for Electricity and Heat Generation VGB PowerTech (11), S. 51-58, 2013
  • Kuschel, M.; Seume, J.R. (2010): Influence of the wakes of Rotating Spokes on the Performance of a Turbine Exhaust DiffuserJournal of Thermal Science, Vol. 19, Issue 3, pp. 206-210
  • Lietmeyer, C.; Gündogdu, Y.; Kleppa, O.; Oehlert, K.; Vorreiter, A.; Seume, J. (2009): Zukunftsperspektiven für die HochtemperaturgasturbineVGB PowerTech, Band 89, Heft 10/2009, S. 48-55 auch veröffentlicht auf der VGB Fachtagung Gasturbinen und Gasturbinenbetrieb, 24-25 Juni 2009, Mannheim
  • Sieker, O.; Seume, J.R. (2008): Influence of Rotating Wakes on Separation in Turbine Exhaust DiffusersJournal of Thermal Science, Vol. 17, Issue 1, pp. 42-49
    DOI: 10.1007/s11630-008-0042-9
  • Pietrasch, R.Z.; Seume, J.R. (2005): Interaction between Struts and Swirl Flow in Gas Turbine Exhaust DiffusersJ. of Thermal Science Vol. 14, No.4, pp. 314-320

Nationale Konferenzbeiträge, nicht begutachtet

  • Amer, M.; Maroldt, N.; Seume, J.R. (2020): Investigation of Multiharmonic Effects in a Single Stage High Speed CompressorDeutscher Luft- und Raumfahrtkongress 2019, Darmstadt, Deutsche Gesellschaft für Luft- und Raumfahrt
    DOI: 10.25967/490212
  • Denkena, B., Gilge, P., Nübel, N., Seume, J.R. (2020): Regeneration komplexer Investitionsgüter SystemdemonstratorProceedings of the 20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), 2. Dezember 2020, Hannover, S. 39-52
  • Schwerdt, L.; Seume, J.R. (2018): Implementation and Experimental Verification of Active Flow Control by Jet Injection over a Coanda Surface in a Multi-Stage High-Speed Axial Compressor5th International Conference on Experimental Fluid Mechanics ICEFM 2018 Munich, Germany, July 2-4, 2018
  • Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2017): Kompakte elektrisch angetriebene Turbokompressoren für ein aktives Hochauftriebssystem künftiger VerkehrsflugzeugeE-MOTIVE Expertenforum, 5-6 September 2017, Hannover, Germany
  • Willeke, T.; Seume, J.R. (2017): Verbessertes Teillastverhalten mehrstufiger Axialverdichter durch gezielte StrömungsbeeinflussungLiFE 2050 - Tag der Energieforschung 2017, 4 Mai 2017, Leibniz Universität Hannover
  • Schwerdt, L.; Siemann, J.; Seume, J.R. (2016): Active Flow Control Implemented in a Multi-Stage High-Speed Axial Compressor87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung(DMV), Proceedings in Applied Mathematics and Mechanics (PAMM), 07-11 March 2016, Braunschweig
    DOI: 10.1002/pamm.201610311
  • Langer, S; Ring, T.; Hurfar, M.C.; Seume, J.R. (2016): Erfahrung mit der interdisziplinären und standortübergreifenden Vorlesung "Einführung in die Technische Akustik"42. Jahrestagung für Akustik – DAGA 2016, Aachen. Weitere Informationen
  • Fräger, L.; Brand, C.R.; Seume, J.R. (2016): Robustheit des Delay-and-Sum-Beamformers gegenüber fehlerbehafteten Eingangsgrößen42. Jahrestagung für Akustik – DAGA 2016, Aachen. Weitere Informationen
  • Kellersmann, A.; Gilge, P.; Seume J.R.; Friedrichs J. (2015): Performance Impact of High Pressure Compressor Blisk Roughness64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015, Rostock, Germany
  • Drechsel, B.; Herbst, F.; Seume, J.R. (2015): Instationäre Validierung von PIV-Messungen in einem skalierten Abgas-Ringdiffusor einer GasturbineIn: Beckmann, M., Hurtado, A.; Kraftwerkstechnik 2015 - Strategien, Anlagentechnik und Betrieb; SAXONIA Verlag, S. 489-453
  • Hennecke, C.; Hartmann, U.; von der Haar, H.;Dinkelacker, F.; Seume, J.R. (2015): Correlation of Defects in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases and Numerical Analysis64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015, Rostock
  • Mumcu, A.; Thouault, N.; Broszat, D.; Seume, J.R. (2015): Experimenteller Aufbau zu Untersuchungen der Modenausbreitung in Niederdruckturbinengittern41. Jahrestagung für Akustik – DAGA 2015, Nürnberg
  • Hurfar, M.; Seume, J.R. (2015): Untersuchung des Einflusses von Schutzgittern für Mikrofone in einem Hochgeschwindigkeits-Windkanal41. Jahrestagung für Akustik – DAGA 2015, Nürnberg
  • Brand, C.R.; Seume, J.R. (2015): Einfluss unterschiedlicher Datenbearbeitung bei der Schallquellenlokalisierung an Klappen für Windenergieanlagen 41. Jahrestagung für Akustik – DAGA 2015, Nürnberg
  • Meinzer, C.E.; Schmitt, S.; Seume, J.R. (2014): Akustische Anregung von Schaufelschwingungen14. Statusseminar der AG Turbo, Verbundprojekt für das emissionsarme Kraftwerk „AG Turbo 2020“, 8-9 Dezember 2014, DLR, Köln-Porz
  • Koupeny, J.; Bresemann, D.; Meinzer, C.; Mertens, A.; Ponick, B.; Seume, J.R. (2014): Universelles Werkzeug zur Steigerung der Energieeffizienz von technischen Prozessen am Beispiel eines Prozesskühlsystems mit elektrischer AntriebstechnikSIMPEP Kongress, 17-18 September 2014, Koblenz/Lahnstein
  • Meinzer, C.E.; Wolff, T.; Hauptmann, T.; Seume, J.R. (2014): Aeroelastic Analysis of Turbomachinery using TRACETRACE User Conference, 24-27 March 2014, Cologne
  • Freund, O.; Meinzer, C.E.; Seume J.R. (2014): Validierung und Einsatz eines optischen Tip-Timing Systems in einem AxialverdichterZustandsbewertung in der Energie- und Anlagentechnik, Fachtagung TÜV Süd, 19.-20. March 2014, Munich
  • Brand, C.R.; Seume, J.R. (2014): Quantifizierung der globalen Schallemission eines skalierten Flügelprofils mit Hinterkantenklappe für Windenergieanlagen40. Jahrestagung für Akustik – DAGA 2014, Oldenburg
  • Kwitschinski, T.; Gustav, D.; Gerkens, P.; Seume, J. (2014): Einfluss der Filletgeometrie auf die Ausbildung von Sekundärströmungen in einer TurbinenstufeBeckmann, M.; Hurtado, A. (Hrsg.): Kraftwerkstechnik 2014 - Strategien, Anlagentechnik und Betrieb.
    ISBN: 978-3-934409-64-4
  • Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Beurteilung von Störungen in Flugtriebwerken2. Kolloquium des SFB 871 - Zukünftige Regenerationstechnologien, 12. November 2013, Hannover
  • Bartelt, M.; Witthaus, S.; Seume, J.R. (2013): Experimentelle Untersuchungen an einem Aeroakustik-Windkanal für Turbomaschinenanwendungen - Eine Übersicht über aktuelle EntwicklungenDGLR-/DEGA-Workshop "Simulation und Validierung bei Strömungsschallproblemen in der Luftfahrt, Fahrzeug- und Anlagentechnik", 20-21 November 2013, München
  • Drechsel, B.; Seume, J.R. (2013): Verbesserung des Druckrückgewinns in Axialdiffusoren für GuD-KraftwerkeBeitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 445-459, ISBN: 978-3-944310-04-6.
  • Drechsel, B.; Hohenstein, S.; Aschenbruck, J.; Seume, J.R. (2013): Einfluss betriebs- und regenerationsbedingter Varianzen von TurbinenschaufelnVGB-Fachtagung “Gasturbinen und Gasturbinenbetrieb 2013”, 11 June 2013, Friedrichshafen
  • Ernst, B.; Seume J.R. (2013): Investigation of Structural Uncertainty of Wind Turbine Rotor Blades6. Dresdner Probabilistik-Workshop, 10-11 Oktober 2013, Technische Universität Dresden
  • Hohenstein, S.; Gilge, P.; Raulf, C.; Seume, J.R. (2013): Einfluss lokaler Rauheiten auf die aerodynamischen Verluste von TurbinenschaufelnDeutscher Luft- und Raumfahrtkongress 2013, 10-12 September, Stuttgart
  • Tesch, M.; Aschenbruck, J.; Hohenstein, S.; Schmidt, A.; Seume, J.R. (2013): Technik entdecken - Schüler-Lehrer-Tag an der Universität HannoverGesellschaft für Didaktik der Chemie und Physik Jahrestagung in Hannover 2012
  • Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J.R. (2013): Steigerung der Energieeffizienz durch intelligente Nutzung elektrischer AntriebssystemeETG Kongress, 5-6 November 2013, Berlin
  • Seume, J.R.; Teichel, S.H.; Burnazzi, M.; Schwerter, M.; Behr, C.; Rudenko, A.; Schmitz, A.; Dörbaum, M.; Atalayer, C. (2013): SFB 880 – Efficient High Lift62. Deutscher Luft- und Raumfahrtkongress 2013, 10-12 September, Stuttgart, Deutschland, DLRK2013_301273
  • Eilts, P.; Gehrke, S.; Kaack, M.; Sourell, R.; Wolf, R.; Munack, A.; Pabst, C.; Krahl, J.; Montenegro, R.E.; Meier, M.A.R.; Brümmer, A.; Hütker, J.; Nikolov, A.; Seume, J.R.; Kunte, H. (2012): Motorenentwicklung im Nutzfahrzeug1. VDI-Konferenz, 27-28 September 2012, Stuttgart
  • Seume, J.R.; Müller-Kirchenbauer, J.; Kurrat, M.; Biester, M. H.-O; Munzel, B.; Derlien, H. (2012): Power-to-Gas-to-Power - Schnittstellendynamik bei der Einspeisung und Rückwandlung elektrolytisch erzeugten Wasserstoffs in das GasnetzKraftwerkstechnisches Kolloquium, 23–24 Oktober 2012, Dresden
  • Bartelt, M.; Seume, J.R. (2011): Auslegung und Optimierung eines Aeroakustik-Kanals für Turbomaschinenanwendungen unter Verwendung numerischer MethodenDeutscher Luft- und Raumfahrtkongress 2011, 27-29 September, Bremen
  • von Seggern, H.G.; Seume, J.R. (2010): Verlaufskontrolle von Lungenkrankheiten anhand exhalierter Aerosole28. DECHEMA-Jahrestagung der Biotechnologen, 23 September 2010, Aachen
  • Lietmeyer, C.; Hohenstein, S.; Naschilevski, S.; Seume, J.R. (2010): Einfluss von Riblet-Strukturen auf den Wirkungsgrad eines Hochgeschwindigkeits-AxialverdichtersDeutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg
  • Kleppa, O.; Henke, M.; Seume, J.R. (2010): Verbesserte Nutzung betriebs-beanspruchter Bauteile durch gezielte RegenerationDeutscher Luft- und Raumfahrtkongress 2010
  • Vorreiter, A.; Seume, J.R. (2010): Numerische Untersuchungen zum Wirkungsgrad von aktiver Strömungsbeeinflussung im Stator eines mehrstufigen AxialverdichtersDeutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg
  • Gomez, A.; Seume, J.R. (2009): Aerodynamische Turmbelastung (Poster-Beitrag)Offshore-Windenergie-Kolloquium – ForWind., 4. June 2009, Hanover
  • Ziesenis, B.; Gündogdu, Y.; Seume, J.R. (2007): Vorstudie Einlaufgeometrie Vorhaben Nr. M1502 – Untersuchung des Einflusses der Verdichter-Einlaufgeometrie auf das Betriebsverhalten von AbgasturboladernFVV Informationstagung Motoren/Turbomaschinen, Heft R 537 (2007), Frankfurt
  • Vorreiter, A.; Ziesenis, B.; Seume, J.R. (2007): Studie TC-Lagerreibung Vorhaben Nr. 908 – Untersuchung und empirische Modellbildung des Reibmomentes von TurboladerlagerungenFVV Informationstagung Motoren/Turbomaschinen, Heft R 537 (2007), Frankfurt
  • Seume, J.R. (2006): Aktuelle Entwicklungstendenzen stationärer Gasturbinen aus Sicht der Forschung5. VDI Fachtagung: Stationäre Gasturbinen im Fokus von Wirtschaftlichkeit, Sicherheit und Klimaschutz, 21-22 November 2006, Leverkusen
  • Seume, J.R. (2006): Brechungsindex und Dichtebestimmung mit der BOS-Methode (Backround Oriented Schlieren Method)Measurement, 15-16 February 2006, Göttingen
  • Keppel, W.; Niehuis, R.; Seume, J.R. Weyer, H. (2004): Forschungskonzepte für TurbinenschaufelnVDI-Tagung: Effizienzsteigerung von konventionellen und nuklearen Kraftwerken, 18-19 November 2004, Köln, VDI-Bericht 1862, S. 161-175
  • Abdelhamid, S.; Berndt, R.; Grigoriadis, P.; Hagelstein, D.; Nickel, J.; Pucher, H.; Seume, J.R. (2003): Erweiterte Darstellung und Extrapolation von Turbolader-Kennfeldern als Randbedingung der Motorprozesssimulation5. Internationales Stuttgarter Symposium zu Kraftfahrwesen und Verbrennungs­motoren, 18-20 February 2003, Stuttgart
  • Fleige, H.-U.; Pietrasch, R.Z.; Rieß, W.; Seume, J.R. (2003): Optimierung von Turbinenaustrittsdiffusoren zur WirkungsgradverbesserungVDI-Tagung: Retrofit, 3-4 Juni 2003, Hannover, VDI-Bericht 1769

Nationale wissenschaftliche Beiträge in Fachzeitschriften, nicht begutachtet

  • Kwitschinski, T.; Henke, M.; Bartelt, M. Seume, J.R. (2020): Ventilation im Teil- und Schwachlastbetrieb von HD- und ND-DampfturbinenBeitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 379-394
    ISBN: 978-3-944310-04-6
  • Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R. (2020): Mehr Effizienz durch kleinere Spalte – Untersuchungen zur Druckverteilung im Radrückraum eines schnelllaufenden RadialverdichtersPumpen und Kompressoren für den Weltmarkt 2020, VDMA-Verlag, pp. 66-72
  • Willeke, T.; Herbst, F; Seume, J.R. (2016): Strömungsbeeinflussung für zukünftige FlugtriebwerkeIngenieurspiegel, Ausgabe März 2016
  • Müller, C.; Herbst, F; Seume, J.R. (2015): Turbomaschinen in Flugzeugen: Entwicklung, Optimierung und Regeneration für Flugtriebwerke und KompressorenIngenieurspiegel, Ausgabe März 2015
  • Seume, J.R.; Wark, M.; Kleppa, O. (2009): Brennstoffzellen – Saubere und effiziente Stromproduktion der ZukunftUnimagazin Hannover, Ausgabe 1/2-2009
  • Seume, J.R.; Kuschel, M. (2009): Einsatzfeld Turbomaschinen – Effiziente Turbinen für Umweltfreundliche KraftwerkeUnimagazin Hannover, Ausgabe 1/2-2009
  • Rolfes, R.; Schaumann, P.; Seume, J.R., et al. (2009): Windenergieforschung an der Leibniz Universität HannoverUnimagazin Hannover, Ausgabe 1/2-2009
  • Hellmich, B.; Seume, J.R. (2008): Causes of Acoustic Resonance in a High-Speed Axial CompressorJ. Turbomach 130(3), 031003 (May 02, 2008) (9 pages)
    DOI: 10.1115/1.2775487

Offenlegungsschriften

  • Volkswagen (2017): Abgasturbine, Abgasturbolader, Brennkraftmaschine und KraftfahrzeugErfinder: Jörg R. SEUME, Melf PETERS, Thorsten KLEINE SEXTRO, Jasper KAMMEYER, Axel GROENENDIJK und Oliver HOLTHOFF. 01.06.2017. Anmeldung: 25.11.2015. DE, Patentschrift DE102015223257

Patente in Kraft

  • IFTA Ingenieurbüro für Thermoakustik (2016): Verfahren zur Untersuchung des frequenzabhängigen Schwingungsverhaltens eines Brenners, Erfinder: Jörg R. Seume, Jakob Hermann21.01.2016. Anmeldung: 19.03.2004. DE, Patentschrift DE102004013584
  • Volkswagen (2011): Abgasturbolader mit einer Radialturbine, Erfinder: Jörg R. SEUME, Peter Wolfgang MANZ, Yavuz GÜNDOGDU, Jasper KAMMEYER.13.01.2011. Anmeldung: 06.07.2009. DE, Patentschrift DE102009031787

Veröffentlichte Berichte

  • Willers, O.; Zeh, C.; Schwarze, H.; Seume, J.R. (2020): Thermally influenced TC Bearing FrictionFinal Report H1219-V1238, Forschungsvereinigung Verbrennungskraftmaschinen e.V., Frankfurt a. M.
  • Kluge, T.; Wein, L.; Oettinger, M.; Seume, J.R. (2020): Abschlussbericht: AG Turbo COOREflex-turbo Vorhaben 4.2.5a: Optimaler Deckbandrückschnitt bei TurbinenlaufschaufelnLeibniz Universität Hannover, Garbsen
  • Schwarzbach, F.; Herbst, F.; Seume J. R.; (2019): Skalenauflösende Simulationen zur Untersuchung des aeroelastischen Verhaltens von TurbomaschinenForschung im HLRN-Verbund 2019, Herausgeber: Konrad-Zuse-Zentrum für Informationstechnik Berlin, Berlin
    ISBN: 978-3-00-063360-7
  • Bittner, S.; Kleinhaus, M.; Seume, J.R. (2019): Abschlussbericht: AG Turbo COOREflex-turbo Vorhaben 4.1.3 A: Innovativer Dampfturbinen-Schaufelpfad für hohe LeistungsdichtenLeibniz Universität Hannover, Hannover
    DOI: 10.2314/KXP:1701956497
  • Hofmann, L.; Mertens, A.; Ponick, B.; Mathis, W.; Seume, J.R. (2018): Aggregierte Modelle für die Simulation von dynamischen Vorgängen in elektromechanischen Energiesystemen (AMSES)TEWISS-Technik und Wissen GmbH
    ISBN: 978-3-95900-212-7
  • kleine Sextro, T.; Fischer, T.; Flinte, J.; Eilts, P.; Seume, J.R. (2018): Querschnittsvariabler Radialverdichter - Aktive Maßnahmen zur Kennfelderweiterung eines Radialverdichters durch Querschnittsvariation für turboaufgeladene OttmomotorenAbschlussbericht, Heft Nr. 1161, FVV Frankfurt
  • Willers, O.; Seume, J.R. (2018): ORC-Turbinen-Generatoreinheit für LkwStahl-Innovationspreis 2018, Herausgeber: Wirtschaftsvereinigung Stahl, Düsseldorf, S. 38-39
  • Kauth, F.; Narjes, G.; Müller, J.; Ponick, B.; Mertens, A.; Seume, J.R. (2017): Compact Electrical Compressors for Active Flow Control in Autonomous High-Lift Systems"SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft: Biennial Report", Rolf Radespiel, Richard Semaan, TU Braunschweig, Braunschweig
  • Kunte, H.; Willers, O.; Peters, M.; Seume, J.R. (2017): Expansionsmaschine (CO2-Programm)FVV-Abschlussbericht, H 1139 (2017), Frankfurt
  • Seume, J.R.; Drechsel, B. (2015): Einfluss von Stützrippen auf die Sekundärströmung in TurbinendiffusorenAG Turbo Abschlussbericht
  • Teichel, S.H.; Dörbaum, M.; Ponick, B.; Seume, J.R. (2015): Compact Dynamic Compressors for Active Flow Control in High-Lift Configurations"SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft: Biennial Report", Rolf Radespiel, Richard Semaan, TU Braunschweig, Braunschweig
  • Ernst, B.; Wilms, M.; Hildebrandt, A.; Schlurmann, T.; Seume J.R. (2015): Action Effects of Wind and Waves (WP 2), In: Probabilistic Safety Assessment of Offshore Wind TurbinesSchlussbericht zum Forschungsvorhaben PSA-OWEA, S. 29-45, Leibniz Universität Hannover, ForWind Zentrum für Windenergieforschung
    DOI: 10.2314/GBV:837382378
  • Rätz, H.; kleine Sextro, T.; Lübbert, N.; Seume, J.R. (2014): Modellierung der Wärmeströme in der Welle eines Turboladers basierend auf CHT-SimulationenFVV Abschlussbericht, Heft R 571 (2014), Frankfurt
  • Teichel, S.H.; Seume, J.R.; Dörbaum, M.; Ponick, B. (2013): Compact Dynamic Compressors for Active Flow Control in Autonomous High Lift ConfigurationsSFB 880 - Fundamentals of High Lift for Future Commercial Aircraft Biennial Report. Braunschweig: TU Braunschweig - Campus Forschungsflughafen
    ISBN: 978–3–928628–63–1
  • Herbst, F.; Eilts, P.; Porzig, D.; Schwarze, H.; kleine Sextro, T; Seume, J.R. (2012): Grundlegende Technologien zur Hochaufladung von FahrzeugmotorenNTH-Abschlussbericht (BU 2.2.4)
  • Seume, J.R.; Kuschel, M. (2011): Sekundärströmungen in TurbinendiffusorenAbschlussbericht, Forschungsvorhaben 0327717B, Vorhaben-Nr.: 4.2.9 der AG Turbo COORETEC-turbo, December 2011
  • Seume, J.R.; Sieker, O. (2008): Hocheffiziente Turbinendiffusoren – Teil A: Experimentelle UntersuchungenAbschlussbericht, Forschungsvorhaben 0327720E, Vorhaben-Nr.: 4.2.8.A der AG Turbo COOREFF-T, April 2008, Verbundprojekt CO2-Reduktion durch Effizienz
  • Seume, J.R.; Goldhahn, E.; Steglich, T.; van den Braembussche, R.A.; Prinsier, J.; Alsalihi, Z.; Verstraete, T. (2007): Vorleitradoptimierung II Vorhaben Nr. 846 – Strömungsvorgänge zwischen Vorleitapparat und Laufrad eines Radialverdichters und ihre gegenseitige BeeinflussungFVV Abschlussbericht, Heft 838 (2007), Frankfurt
  • Steglich, T; Seume, J.R.; Shaaban, S. (2005): Radialverdichterkennfeld Vorhaben Nr. 823 – Erstellung einer Kennfeldberechnungsmethode zur Inter- und Extrapolation des gemessenen Radialverdichterkennfeldes anhand vorhandener FVV-ErgebnisseFVV Abschlussbericht, Heft 813, Heft R 529 (2005), Frankfurt, S. 119-138
  • Seume, J.R. (2004): Forschungskonzepte für TurbinenschaufelnBeitrag in: Keppel, W., Niehuis, R., Weyer, H.: „Effizienzsteigerung von konventionellen und nuklearen Kraftwerken“, Hrsg.: VDI-Gesellschaft Energietechnik, Düsseldorf: VDI-Verlag 2004, VDI-Bericht Nr. 1862, S. 161/175
  • Seume, J.R. (2004): Beitrag der AG Turbo zur Wirkungssteigerung von GasturbinenBeitrag in: „Stationäre Gasturbinen: Fortschritte und Betriebserfahrungen“, Hrsg.: VDI-Gesellschaft Energietechnik, Düsseldorf: VDI-Verlag 2004, VDI-Bericht Nr. 1857
  • Steglich, T.; Kitzinger, J.; Seume, J.R.; van den Braembussche, R.; Prinsier, J. (2003): Strömungsvorgänge in spiralförmigen Sammelräumen für RadialverdichterstufenFVV Abschlussbericht, Heft 773 (2003), Frankfurt
  • Seume, J.R.; Pucher, H.; Bohn, D. (2002): TC-Gesamtkennfeldbestimmung / TC-Wärmeströme – Erweiterte Darstellung und Extrapolation von Turbolader-Kennfeldern als Randbedingung der Motorprozesssimulation / Modellierung des Wärmeflusses im und am System Turbolader.FVV Abschlussbericht, Heft R 517 (2002), Frankfurt, S. 39-62
  • Fischer, A.; Seume, J.R. (2001): Bow-Beschaufelung Vorhaben Nr. 737 – Numerische und experimentelle Untersuchung von Bow-Statoren in einem hochbelasteten AxialverdichterFVV Abschlussbericht 2001, Frankfurt
  • Janssen, M.; Seume, J.R.; Zimmermann, H. (1994): Strömungsanalyse der Einzelstufen einer mehrstufigen Turbine und eines mehrstufigen Verdichters einer Gasturbine zur Verbesserung der StrömungsrechenverfahrenAbschlussbericht zum Vorhaben HTGT-Turbotech 1.1.1.1 / 1.1.1.3., Siemens AG, Bereich Energieerzeugung (KWU)
  • Seume, J.R.; Friedman, G.; Simon, T.W. (1992): Fluid Mechanics Experiments in Oscillatory FlowNASA Contractor Report 189127, March 1992

Wissenschaftliche Symposien

  • Nachtigal, P.; Mai, H.; Rätz H.; Willers, O.; Seume, J.R. (2020): Auslegung und Regelung eines Pulsationsgenerators für Turbolader-HeißgasprüfständeSpannungsfeld Fahrzeugantriebe – Gedenkschrift für Prof. Dr.-Ing. Roland Baar, Universitätsverlag der TU Berlin, S. 628
    DOI: 10.14279/depositonce-9822
    ISBN: 978-3-7983-3161-7
  • Denkena, B., Gilge, P., Nübel, N., Seume, J.R. (2020): Regeneration komplexer Investitionsgüter Systemdemonstrator20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), 2. Dezember 2020, Hannover, 27 Seiten