Publications - Institute of Turbomachinery and Fluid Dynamics

Franke, P.; Wein, L.; Seume, J.R.; Mimic, D. (2024): Numerical Investigation of the Effect of Squealer Tips on the Performance of a 4½-Stage Axial Compressor,  International Journal of Gas Turbine, Propulsion and Power Systems, Volume 15, Number 3, June 2024
DOI: 10.38036/jgpp.15.3_89
ISSN: 1882-5079

Amer, M.; Ventura, C.E.; Maroldt, N.; Seume, J.R.; Wallaschek, J. (2024): Modal Parameter Estimation of Turbomachinery in Operation Taking into Account Friction Damping,  Mechanical Systems and Signal Processing, Vol. 216, Page 111414
DOI: 10.1016/j.ymssp.2024.111414

Lohse, S.; Schuler, J.; Fischer, F.; Seume, J.R., Moreau, S. (2024): On the Aeroacoustic Scaling of Axial Flow Turbines,  International Journal of Gas Turbine, Propulsion and Power Systems, Volume 15, Number 3
DOI: 10.38036/jgpp.15.3_9

Stania, L.; Ludeneit, F.; Seume; J. R. (2024): Experimental Investigation of the Sensitivity of Forced Response to Cold Streaks in an Axial Turbine,  International Journal of Turbomachinery, Propulsion and Power 9, no. 3
DOI: 10.3390/ijtpp9030024
ISSN: 2504-186X

Maroldt, N.; Lohse, S.; Kalla, M.; Ponick, B.; Seume, J.R. (2023): Multidisciplinary Design of an Electrically Powered High-Lift System,  ASME Journal of Turbomachinery, Vol. 145
DOI: 10.1115/1.4062677

Kurth, S.; Cengiz, K.; Moeller, D.; Wein, L.; Seume, J.R. (2023): Systematic Roughness Variation to Model the Influence of Skewness on Wall Bounded Flows,  Journal of the Global Power and Propulsion Society 2023, Vol. 7, 177-187
DOI: 10.33737/jgpps/163089
ISSN: 2515-3080

Liu, J.; Li, M.; Yang, Y.; Schlüter, N.; Mimic, M.; Schröder, D. (2023): Tailored Porous Transport Layers for Optimal Oxygen Transport in Water Electrolyzers: Combined Stochastic Reconstruction and Lattice Boltzmann Method,  ChemPhysChem 2023, e202300197
DOI: 10.1002/cphc.202300197

Seume, J.R. (2023): The Role of the GTSJ in the International Gas Turbine Community,  Journal of the GTSJ, Vol.51 No.1, Page 2
ISBN: 0387-4168

Goessling, J.; Fischer, F.; Hilfer M.; Seume, J.R. (2023): Uncertainty and Validation of Unsteady Pressure-Sensitive Paint Measurements of Acoustic Fields Under Aero Engine-Like Conditions,  Exp Fluids 64, 22
DOI: 10.1007/s00348-022-03558-8

Goeing, J.; Seehausen, H.; Stania, L.; Nuebel, N.; Salomon, J.; Ignatidis, P.; Dinkelacker, F.; Beer, M.; Denkena, B; Seume, J.R.; Friedrichs, J. (2023): Virtual Process for Evaluating the Influence of Real Combined Module Variations on the Overall Performance of an Aircraft Engine,  Journal of the Global Power and Propulsion Society
DOI: 10.33737/jgpps/160055

Cengiz, K.; Kurth, S.; Wein, L.; Seume, J.R. (2023): Use of High-Order Curved Elements for Direct and Large-Eddy-Simulation of Flow over Rough Surfaces,  Technische Mechanik - European Journal of Engineering Mechanics
DOI: 10.24352/UB.OVGU-2023-043

Oettinger, M.; Kluge, T.; Seume, J.R. (2023): Influence of Honeycomb Structures on Labyrinth Seal Aerodynamics,  J. Glob. Power Propuls. Soc. 2022;6:290-303
DOI: 10.33737/jgpps/152697

Schwerdt, L.; Maroldt, N.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J.R. (2023): An Improved Reduced Order Model for Bladed Disks Including Multistage Aeroelastic and Structural Coupling,  Journal of the Global Power and Propulsion Society, Vol. 7, S. 140-152
DOI: 10.33737/jgpps/161707

Nyhuis, M.; Seume, J.R. (2023): Nachhaltige numerische Parameterstudien mit dem Snakemake-Workflow NTRFlows,  Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V., Bonn, 2023
DOI: 10.25967/570465

Coull, J.D.; Ng, H.C.-H.; Dickens, T.; Serna, J.; Cengiz, K. (2023): Pneumatic-Probe Measurement Errors Caused by Fluctuating Flow Angles,  AIAA Journal 2023, 61:6,
DOI: 10.2514/1.J062569

Mang, K.; Ahrens, J.D.; Seume, J.R.; Rolfes, R. (2023): Computational Fluid-Structure Interaction towards Simulating Large Wind Turbines with openFOAM and deal.II Coupled via preCICE,  Proc. Appl. Math. Mech., 23: e202200328
DOI: 10.1002/pamm.202200328

Fischer, F.; Seume, J.R. (2022): Acoustic Optimization Approach for Annular Diffusers in Turbomachinery Applications Using Plane Wave Modelling,  Proceedings of the ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition; GT2022-80517
DOI: 10.1115/GT2022-80517

Nachtigal, P.; Kentschke, T.; Seume, J.R. (2022): Experimentally Validated Design of an Anode Recirculation Blower for Polymer-Electrolyte- Membrane Fuel Cells Under Variable Fluid Composition,  ASME. J. Eng. Gas Turbines Power. December 2022; 144(12): 121014.
DOI: 10.1115/1.4055667
ISBN: 0742-4795

Maroldt, N.; Schwerdt, L.; Berger, R.; Panning-von Scheidt, L.; Rolfes, R.; Wallaschek, J.; Seume, J.R. (2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and Aerocoupling,  Journal of Engineering for Gas Turbines and Power
DOI: 10.1115/1.4055368

Suryadi, A.; Jätz, C.; Herr, M.; Seume, J.R. (2022): Identifying the Flap Side-Edge Noise Contribution of a Wind Turbine Blade Section with an Adaptive Trailing Edge,  Wind Energy. 26(1): 64-75
DOI: 10.1002/we.2786

Sagan, L., Kuestner, C., Eilts, P., and Seume, J. (2022): Axial Turbine Turbocharger for Charging a Lean-Burn Gasoline Engine,  SAE Int. J. Adv. & Curr. Prac. in Mobility 4(6):2342-2361
DOI: 10.4271/2022-01-0377
ISSN: 2641-9637

Amer, M.; Paehr, M.; Panning-von Scheidt, L.; Seume, J.R.; Schmied, J (2022): Determining the Influence of Casing Vibrational Behaviour on Rotordynamics,  ASME. J. Eng. Gas Turbines Power. May 2022; 144(5):051012
DOI: 10.1115/1.4053123

Ahrens, J. D.; Kurth, S.; Cengiz, K.; Wein, L.; Seume, J.R. (2022): Investigation of Turbulence Production and Dissipation Due to Isotropic and Anisotropic Roughness Components on Real Surfaces,  Journal of the Global Power and Propulsion Society
DOI: 10.33737/jgpps/151658

Kellenbrink, C.; Nübel, N.; Schnabel, A.; Gilge, P.; Denkena, B.; Helber, S.; Seume, J.R. (2022): A Regeneration Process Chain with an Integrated Decision Support System for Individual Regeneration Processes Based on a Virtual Twin,  International Journal of Production Research, 60:13, 4137-4158
DOI: 10.1080/00207543.2022.2051089

Amer, M.; Wallaschek, J.; Seume, J.R. (2022): Operational Modal Analysis of an Axial Compressor Rotor and Casing System for the Online Identification of a Digital Twin,  Applied Mechanics, 3(1), 244–258
DOI: 10.3390/applmech3010017

Maroldt, N.; Amer, M.; Seume, J.R. (2022): Forced Response Due to Vane Stagger Angle Variation in an Axial Compressor,  ASME. J. Turbomach. August 2022; 144(8): 081011
DOI: 10.1115/1.4053839

Schödel, M.; Menze, M.; Seume, J.R. (2021): Experimentally Validated Extension of the Operating Range of an Electrically Driven Turbocharger for Fuel Cell Applications,  Maschines, 2021, 9(12), 331
DOI: 10.3390/machines9120331

Oettinger, M.; Mimic, D.; Henke, M.; Schmunk, O.; Seume, J.R. (2021): Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure Turbine,  Journal of the Global Power and Propulsion Society, 5, 1-14
DOI: 10.33737/jgpps/127834

Kluge, T.; Lettmann, I.S.; Oettinger, M.; Wein, L.; Seume, J.R. (2021): Unsteady Flow Phenomena in Turbine Shroud Cavities,  Journal of the Global Power and Propulsion Society (5); S. 177-190
DOI: 10.33737/jgpps/141211

Oettinger, M.; Wein, L.; Mimic, D.; Gilge, P.; Hartmann, U.; Seume, J.R. (2021): Automated Detection of Hot-Gas Path Defects by Support Vector Machine-Based Analysis of Exhaust Density Fields,  Journal of the Global Power and Propulsion Society, Special Issue: Data-driven modelling and high-fidelity simulations, 1-16
DOI: 10.33737/jgpps/137952

Pilgrim, C.C.; Ehrhard, J.; Schinnerl, M.; Araguás-Rodríguez, S.; Peral, D.; Straka, M.-S.; Genschmar, M. Karagiannopoulos, S.; Gutierrez, S.P.; Feist, J.P. (2021): Thermal Profiling of Automotive Turbochargers in Durability Tests,  ASME J. Eng. Gas Turbines Power. Feb 2022, 144(2): 021009
DOI: 10.1115/1.4052497

James, M.; Suchla, D. A.; Dunkel, J.; Wilczek, M. (2021): Emergence and Melting of Active Vortex Crystals,  Nature Communications 12:5630
DOI: 10.1038/s41467-021-25545-z

Goeing, J.; Seehausen, H.; Pak, V.; Lueck, S.; Friedrichs, J.; Seume, J.R. (2020): Influence of Combined Compressor and Turbine Deterioration on the Overall Performance of a Jet Engine Using RANS Simulation and Pseudo Bond Graph Approach,  Journal of the Global Power and Propulsion Society, 4, 296-308
DOI: 10.33737/jgpps/131109

Lehnhoff, S.; Gómez G.A.; Seume, J.R. (2020): Full-Scale Deformation Measurements of a Wind Turbine Rotor in Comparison with Aeroelastic Simulations,  Wind Energy Science, 5:1411-1423
DOI: 10.5194/wes-5-1411-2020

Schwarzbach, F.; Mimic, D.; Herbst, F. (2020): Profile Aerodynamics of an Oscillating Low-Pressure–Turbine Blade,  International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), October 2020, Volume 11, Number 4
DOI: 10.38036/jgpp.11.4_68

Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R (2020): Greater Efficiency Thanks to Smaller Gaps – Investigations on Pressure Distribution in the Impeller Backplane Cavity of a High-Speed Centrifugal Compressor,  Pumps and Compressors for the World Market 2020, VDMA-Verlag, pp. 66-72

Cengiz, K.; Özyörük, Y. (2020): Experiences with Two Detached Eddy-Simulation Approaches through Use of a High-Order Finite Volume Solver,  Int J Numer Meth Fluids. 92, 899-921
DOI: 10.1002/fld.4811

Gilge, P.; Mulleners, K.; Seume, J.R. (2020): Experimental Analysis of Multiscale Vortex Shedding in Turbulent Turbomachine Blade Wakes,  AIAA Journal, 58(12):5183-5190
DOI: 10.2514/1.J059476

Eggers, T.; Kim, H.R.; Bittner, S.; Friedrichs, J.; Seume, J.R. (2020): Aerodynamic and Aeroelastic Effects of Design-Based Geometry Variations on a Low-Pressure Compressor,  International Journal of Turbomachinery, Propulsion and Power 2020, 5(4), 26
DOI: 10.3390/ijtpp5040026
ISBN: 2504-186X

Flinte, J.; Eilts, P.; Willers, O.; Seume, J.R. (2020): Erweiterung des Kennfeldes eines ATL-Verdichters durch aktive Querschnittsvariation,  MTZ-Motortechnische Zeitschrift, Vol. 81, 66-70
DOI: 10.1007/s35146-019-0171-6

Seehausen, H.; Gilge, P.; Kellersmann, A.; Friedrichs, J.; Herbst, F. (2020): Numerical Study of Stage Roughness Variations in a HPC,  International Journal of Gas Turbine, Propulsion and Power, June 2020, Volume 11, Number 3
DOI: 10.38036/jgpp.11.3_16

Meinzer, C. E.; Seume, J. R. (2020): Experimental and Numerical Quantification of the Aerodynamic Damping of a Turbine Blisk,  ASME. J. Turbomach. 142(12):121011
DOI: 10.1115/1.4048192

Uhrig, F.; Schinnerl, M.; Haluska, P.; Kurzweil, P.; von Unwerth, T. (2019): Comparative Study of Different Air Supply Systems for Automotive Fuel Cell Applications,  SAE International Journal of Alternative Powertrains, 2019, 8(1), 29-39
DOI: 10.4271/08-08-01-0002
ISSN: 2167-4191

Yirtici, O.; Cengiz, K.; Özgen, S.; Tuncer, I.H. (2019): Aerodynamic Validation Studies on the Performance Analysis of Iced Wind Turbine Blades,  Computers & Fluids, 192, 104271
DOI: 10.1016/j.compfluid.2019.104271

Willers, O.; Valstar, F.; kleine Sextro, T.; Flinte, J.; Fischer, T.; Eilts, P.; Seume, J.R. (2019): Erhöhung des Low-End-Torque eines Ottomotors durch Querschnittsvariation des Turboladerverdichters,  In: Liebl, J. (eds) Experten-Forum Powertrain: Ladungswechsel und Emissionierung 2019. Proceedings. Springer Vieweg: Wiesbaden
DOI: 10.1007/978-3-658-28709-2_5
ISBN: 978-3-658-28709-2

Gilge, P.; Kellersmann, A.; Friedrichs, J.; Seume J.R. (2019): Surface Roughness of Real Operationally Used Compressor Blade and Blisk,  Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 233(14), S. 5321–5330
DOI: 10.1177/0954410019843438

Miro, S.; Willeke, T.; Broggi, M.; Seume, J. R.; Beer, M. (2019): Reliability Analysis of an Axial Compressor Based on One-Dimensional Flow Modeling and Survival Signature,  ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering. March 14, 2019
DOI: 10.1115/1.4043150

Gößling, J.; Ahlefeldt, T.; Hilfer M. (2019): Experimental Validation of Unsteady Pressure-Sensitive Paint for Acoustic Applications,  Experimental Thermal and Fluid Science: Volume 112
DOI: 10.1016/j.expthermflusci.2019.109915

Flinte, J.; kleine Sextro, T.; Eilts, P.; Seume, J.R. (2018): Potentials of Variable Cross Section Compressor Regarding Surge Line and Compressor Efficiency Using Engine Test Bench Measurements and Engine Process Simulation,  CO2 Reduction for Transportation Systems Conference, SAE Technical Paper, SAE International, USA
DOI: 10.4271/2018-37-0004

Tiainen, J.; Jaatinen-Värri, A.; Grönman, A.; Fischer, T.; Backman, J. (2018): Loss Development Analysis of a Micro-Scale Centrifugal Compressor,  Energy Conversion and Management, 2018 (166), S. 297 - 307
DOI: 10.1016/j.enconman.2018.04.014

Yalçın, Ö.; Cengiz, K.; Özyörük, Y. (2018): High-Order Detached Eddy-Simulation of Unsteady Flow Around NREL S826 Airfoil,  Journal of Wind Engineering and Industrial Aerodynamics, 179, 125-134
DOI: 10.1016/j.jweia.2018.05.017

Mimic, D.; Jätz, C.; Herbst, F. (2018): Correlation Between Total Pressure Losses of Highly Loaded Annular Diffusers and Integral Stage Design Parameters,  Journal of the Global Power and Propulsion Society. 2: 388-401
DOI: 10.22261/JGPPS.I9AB30

Liu, X.; Willeke, T.; Herbst, F.; Yang, J.; Seume, J.R. (2018): A Theory on the Onset of Acoustic Resonance in a Multistage Compressor,  ASME. J. Turbomach 140(8), 081003
DOI: 10.1115/1.4040551

Goldmann, A.; Sauter, W.; Oettinger, M.; Kluge, T.; Schröder, U.; Seume, J.R.; Friedrichs, J.; Dinkelacker, F. (2018): A Study on Electrofuels in Aviation,  Energies, 11(2):392
DOI: 10.3390/en11020392

Burgmann, S.; Fischer, T.; Rudersdorf, M.; Roos, A.; Heinzel, A.; Seume, J.R. (2018): Development of a Centrifugal Fan with Increased Part-Load Efficiency for Fuel Cell Applications,  Renewable Energy, Volume 116, Part A, February 2018, Pages 815-826
DOI: https://doi.org/10.1016/j.renene.2017.09.075

Mueller, J.-K.; Bensmann, A.; Bensmann, B.; Fischer, T.; Kadyk, T.; Narjes, G.; Kauth, F.; Ponick, B.; Seume, J.; Krewer, U.; Hanke-Rauschenbach, R.; Mertens, A. (2018): Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift Systems,  Energies, 11(1):179
DOI: 10.3390/en11010179

Müller-Schindewolffs, C.; Baier, R.-D.; Seume, J.R.; Herbst F. (2017): Direct Numerical Simulation Based Analysis of RANS Predictions of a Low-Pressure Turbine Cascade,  J. Turbomach 139(8), 081006, Mar 21, 2017,11 pages
DOI: 10.1115/1.4035834

Koepplin, V.; Herbst, F.; Seume, J.R. (2017): Correlation-Based Riblet Model for Turbomachinery Applications,  J. Turbomach 139(7), 071006, Feb 28, 2017, 10 pages
DOI: 10.1115/1.4035605

Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R. (2017): Correcting Turbocharger Performance Measurements for Heat Transfer and Friction,  J. Eng. Gas Turbines Power 140(2), 022301 (Oct 03, 2017) (9 pages)
DOI: 10.1115/1.4037586

Gilge, P.; Hohenstein, S.; Seume, J.R. (2017): Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine Blade,  International Journal of Gas Turbine, Propulsion and Power Systems, October 2017, Volume 9, Number 3, pp.12-21
DOI: 10.38036/jgpp.9.3_12

Seume, J.R.; Peters, M.; Kunte, H. (2017): Design and Test of a 10kW ORC Supersonic Turbine Generator,  Journal of Physics: Conference Series, Volume 821, Number 1, 12023
DOI: 10.1088/1742-6596/821/1/012023

Teichel, S.; Verstraete, T.; Seume, J.R. (2017): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift Systems,  International Journal of Gas Turbine, Propulsion and Power Systems, June 2017, Volume 9, Number 2, pp. 19-26
DOI: 10.38036/jgpp.9.2_19

Hauptmann, T.; Aschenbruck, J.; Seume, J.R. (2017): Forced Response Excitation due to Stagger Angle Variation in a Multi-Stage Axial Turbine,  International Journal of Gas Turbine, Propulsion and Power Systems, October 2017, Volume 9, Number 3
DOI: 10.38036/jgpp.9.3_1

Gilge, P.; Mulleners, K. (2016): Resulting Aerodynamic Losses of Combinations of Localized Roughness Patches on Turbine Blades,  AIAA Journal, Vol. 54, No. 8 (2016), pp. 2552-2555
DOI: 10.2514/1.J054602

Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis,  J. Eng. Gas Turbines Power 139(3), 031504 (Sep 27, 2016) (8 pages)
DOI: 10.1115/1.4034449

Hartmann, U.; Seume, J.R. (2016): Combining ART and FBP for Improved Fidelity of Tomographic BOS,  Journal of Measurement Science and Technology, Vol. 27, No. 9, 097001 (10 pages)
DOI: 10.1088/0957-0233/27/9/097001

Wiegmann, B.; Seggern, H. von; Höffler, K.; Korossis, S.; Dipresa, D.; Pflaum, M.; Schmeckebier, S.; Seume, J.R.; Haverich, A. (2016): Developing a Biohybrid Lung – Sufficient Endothelialization of Poly-4-methly-1-pentene Gas Exchange Hollow-Fiber Membranes,  Journal of the Mechanical Behaviour of Biomedical Materials, Vol. 60, July 2016, pages 301-311
DOI: 10.1016/j.jmbbm.2016.01.032

Drechsel, B.; Seume, J.R.; Herbst, F. (2016): On the Numerical Prediction of the Influence of Tip Flow on Diffuser Stability,  International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), December 2016, Volume 8, Number 3
DOI: 10.38036/jgpp.8.3_29

Grönman, A.; Biester, M.; Turunen-Saaresti, T.; Jaatinen-Värri, A.; Backman, J.; Seume, J.R. (2015): Importance of the Vane Exit Mach Number on the Axial-Clearance-Related Losses,  Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol 230, Issue 2, pp. 175 - 183
DOI: 10.1177/0957650915623087

Mulleners, K.; Gilge, P.; Hohenstein, S. (2014): Impact of Surface Roughness on the Turbulent Wake Flow of a Turbine Blade,  Journal of Aerodynamics, Vol. 2014, Article ID 458757, 9 pages
DOI: 10.1155/2014/458757

Teichel, S.H.; Dörbaum, M.; Misir, O.;Merkert, A.; Mertens, A.; Seume, J.R.; Ponick, B. (2014): Design Considerations for the Components of Electrically Powered Active High-Lift Systems in Civil Aircraft,  CEAS Aeronautical Journal: Volume 6, Issue 1 (2015), pp. 49-67
DOI: 10.1007/s13272-014-0124-1

Freund, O.; Montgomery, M.; Mittelbach, M.; Seume, J.R. (2014): Non-Contact Test Set-Up for Aeroelasticity in a Rotating Turbomachine Combining a Novel Acoustic Excitation System with Tip-Timing,  Journal of Measurement Science and Technology Vol. 25, No. 3, 035008
DOI: https://doi.org/10.15488/390

Binner, M.; Seume, J.R. (2014): Flow Patterns in High Pressure Steam Turbines During Low-Load Operation,  J. Turbomach 136(6), 061010 (Nov 21, 2013) (12 pages)
DOI: 10.1115/1.4025162

Adamczuk, R.R.; Luehrmann, J.; Seume, J.R. (2014): Methodology for Evaluating Hot Gas Path Defects in an Exhaust Jet,  Journal of Aerospace Science and Technology. December 2014, Vol. 39, pp. 120-127
DOI: 10.1016/j.ast.2014.08.011

Herbst, F.; Fiala, A.; Seume, J.R. (2014): Modeling Vortex Generating Jet-Induced Transition in Low-Pressure Turbines,  J. Turbomach 136(7), 071005 (Jan 02, 2014) (16 pages)
DOI: 10.1115/1.4025735

Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.M.; Seume, J.R. (2013): Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies,  J. Turbomach 135(3), 031033 (Mar 25, 2013) (9 pages)
DOI: 10.1115/1.4007511

Seume, J.R.; Pourshaghaghy, A. (2013): Estimation of Surface Heat Flux in the Wind Tunnel Cascade Blades,  Scientific Journal for Fundamentals and Applications of Engineering Mechanicals, 2013, Vol. 33, Issue 1, pp. 52-66

Lietmeyer, C.; Oehlert, K.; Seume, J.R. (2013): Optimal Application of Riblets on Compressor Blades and their Contamination Behaviour,  J. Turbomach 135(1), 011036 (Oct 31, 2012) (10 pages)
DOI: 10.1115/1.4006518

Herbst, F.; Kozulovic, D.; Seume, J.R. (2013): Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine Profiles,  J. Turbomach 135(1), 011038 (Oct 31, 2012) (8 pages)
DOI: 10.1115/1.4006421

Adamczuk, R.; Seume, J.R. (2012): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions,  International Journal of Gas Turbine, Propulsion and Power Systems, June 2012, Volume 4, Number 2
DOI: https://doi.org/10.38036/jgpp.4.2_1

Shaaban, S.; Seume, J.R. (2012): Impact of Turbocharger Non-Adiabatic Operation on Engine Volumetric Efficiency and Turbo Lag,  International Journal of Rotating Machinery, vol. 2012, Article ID 625453, 11 pages
DOI: 10.1155/2012/625453

Fischer, K.; Seume, J.R. (2012): Thermo-Mechanical Stress in Tubular Solid Oxide Fuel Cells: Part II-Operating Strategy for Reduced Probability of Fracture Failure,  IET Renewable Power Generation, June 2012, Vol. 6, issue 3, pp. 194-205, ISSN: 1752-1424
DOI: 10.1049/iet-rpg.2011.0109

Fischer, K.; Seume, J.R. (2012): Thermo-Mechanical Stress in Tubular Solid Oxid Fuel Cells: Part I-Transient Operating Behavior and the Relevance of Material Creep,  IET Renewable Power Generation(2012),6(3):177
DOI: 10.1049/iet-rpg.2011.0095

Ernst, B.; Seume, J.R. (2012): Investigation of Site-Specific Wind Field Parameters and Their Effect on Loads of Offshore Wind Turbines,  Energies. 2012; 5(10):3835-3855, ISSN: 1996-1073
DOI: 10.3390/en5103835

Mohseni, A.; Goldhahn, E.; Van den Braembussche, R. A.; Seume, J.R. (2012): Novel IGV Designs for Centrifugal Compressors and their Interaction with the Impeller,  J. Turbomach 134(2), 021006 (Jun 22, 2011) (8 pages)
DOI: 10.1115/1.4003235

Vorreiter, A.; Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R. (2012): Numerical Investigations of the Efficiency of Circulation Control in a Compressor Stator,  J. Turbomach 134(2), 021012 (Jun 27, 2011) (11 pages)
DOI: 10.1115/1.4003286

Haslbeck, K.; Schwarz, K.; Hohlfeld, J.M.; Seume, J.R.; Koch, W. (2010): Submicron Droplet Formation in the Human Lung,  Journal of Aerosol Science, Vol. 41, Issue 5, pp. 429-438
DOI: 10.1016/j.jaerosci.2010.02.010

Gomez, A.; Seume, J.R. (2009): Load Pulses on Wind Turbine Structures Caused by Tower Interference,  Wind Engineering, Vol. 33, Issue 6, pp. 555-570
DOI: 10.1260/0309-524X.33.6.555

Nouri-Borujerdi, A.; Ziaei-Rad, M.; Seume, J.R. (2009): Numerical Simulation of Developing Compressible Turbulent Flow with Heat Transfer,  Journal of Thermophysics and Heat Transfer, Vol. 23, No. 4, pp. 801-809
DOI: 10.2514/1.41669

Fischer, K.; Seume, J.R. (2009): Impact of the Temperature Profile on Thermal Stress in a Tubular Solid Oxide Fuel Cell,  J. Fuel Cell Sci. Technol 6(1), 011017 (Nov 12, 2008) (9 pages)
DOI: 10.1115/1.2971132

Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R. (2008): Improved Diffuser / Volute Combinations for Centrifugal Compressors,  J. Turbomach 130(1), 011014 (Jan 25, 2008) (9 pages)
DOI: 10.1115/1.2749296

Riess, W.; Shieh, T.-H. (2005): Untersuchung einer Axialturbinen-Stufe mit tangential gekrümmten Leitschaufeln, Teil I: Strömungsstruktur im Leitradkanal,  Forschung im Ingenieurwesen, Band 69, Heft 3, June 2005, S. 151-162
DOI: 10.1007/s10010-004-0143-x

Riess, W.; Shieh, T.-H. (2005): Untersuchung einer Axialturbinen-Stufe mit tangential gekrümmten Leitschaufeln, Teil II: Modellierung für Throughflow-Rechenverfahren,  Forschung im Ingenieurwesen, Band 69, Heft 3, June 2005, S. 163-169
DOI: 10.1007/s10010-004-0144-9

Fischer, A; Rieß, W; Seume, J.R. (2004): Performance of Strongly Bowed Stators in a Four-Stage High Speed Compressor,  J. Turbomach 126(3), 333-338 (Sep 03, 2004) (6 pages)
DOI: 10.1115/1.1649743

Levy, Y.; Pismenny J.; Reissner, A; Riess, W (2002): Relationship between Frequencies of Pressure Oscillations and Rotating Stall in Axial Compressors,  International Journal of Turbo and Jet- Engines, Vol. 19, Issue 4, pp. 233-247
DOI: 10.1515/TJJ.2002.19.4.233

Hasemann, H.; Hagelstein, D.; Rautenberg, M. (2000): Coupled Vibration of Unshrouded Centrifugal Compressor Impellers, Part 1: Experimental Investigation,  International Journal of Rotating Machinery, vol. 6, no. 2, pp. 101-113, 2000.
DOI: 10.1155/S1023621X00000105

Hasemann, H.; Hagelstein, D.; Rautenberg, M. (2000): Coupled Vibration of Unshrouded Centrifugal Compressor Impellers, Part 2: Computation of Vibration Behavior,  International Journal of Rotating Machinery, vol. 6, no. 2, pp. 115-128, 2000
DOI: 10.1155/S1023621X00000117

Sentker, A.; Riess, W. (2000): Experimental Investigation of Turbulent Wake-Blade Interaction in Axial Compressors,  International Journal of Heat and Fluid Flow, Vol. 21, pp. 285-290

Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A. (1998): Application of Active Combustion Instability Control to a Heavy Duty Gas Turbine,  Journal of Engineering for Gas Turbines and Power, Vol. 120, Issue 4, pp. 721-726
DOI: 10.1115/1.2818459

Engeda, A.; Rautenberg, M. (1987): Comparisons of the Relative Effect of Tip Clearance on Centrifugal Impellers,  Journal of Turbomachinery, October 1987, Vol. 109, Issue 4, 545-549 (5 pages)
DOI: 10.1115/1.3262146

Kim, H.; Stania, L.; Maroldt, N.; Oettinger, M. Seume, J.R. (2024): Characterizing the Unsteady Flow Field in Low-Flow Turbine Operation,  Journal of Turbomachinery, Volume 146, Number 10
DOI: 10.1115/1.4065243

Lohse, S.; Moreau, S.; Seume, J.R. (2023): Numerical Validation of an Aeroacoustic Scaling Approach,  AIAA AVIATION 2023 Forum
DOI: 10.2514/6.2023-3837
ISBN: 978-1-62410-704-7

Schulz, Y.; Sagan, L.; Seume, J.R.; Eilts, P. (2023): Axial Compressor as eBooster for charging an Utra-Lean-Burn Hydrogen Combustion Engine,  Proceedings of GPPS Hong Kong 2023

Kim, H.; Stania, L.; Maroldt, N.; Oettinger, M. Seume, J.R. (2023): Characterizing the Unsteady Flow Field in Low-Flow Turbine Operation,  Turbo Expo: Power for Land, Sea, and Air, vol. 87110, p. V13DT36A018. American Society of Mechanical Engineers
DOI: 10.1115/GT2023-102813

Mahlstedt, J.; Fischer, F.; Wein, L.; Seume, J.R. (2023): Analytical Prediction of Acoustic Resonance in Labyrinth Seals,  Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. Boston, Massachusetts. June 26–30, 2023
DOI: GT2023-103709

Schoedel, M.; Nachtigal, P.; Seume, J. R. (2023): Experimentally Validated Improvements of a Cathode Air Compressor for PEM Fuel Cells by Fixed Diffuser Vanes,  Proceeding of 15th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ETC 15, April 24-28, Budapest
DOI: 10.29008/ETC2023-112

Nachtigal, P.; Gößling, J.; Schumie, H.; Kentschke, T.; Smyrek, F.; Szesny, M.; Yang, B.; Klunker, C.; Seume, J.R. (2023): Novel Anode Recirculation Blower for PEM Fuel Cells,  Proceeding of 15th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ETC 15, April 24-28, Budapest
DOI: 10.29008/ETC2023-348

Franke, P.; Nyhuis, M.; Wein, L.; Mimic, D. (2023): Robust Numerical Operating-Map Prediction through Systematic Selection of Turbulence Models,  Proceeding of 15th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ETC 15, April 24-28, Budapest
DOI: https://doi.org/10.29008/ETC2023-175

Franke, P.; Wein, L.; Seume, J.R.; Mimic; D. (2023): Numerical Investigation of the Effect of Squealer Tips on the Performance of a 4½-Stage Axial Compressor,  Proceedings of the International Gas Turbine Congress 2023 Kyoto

Voigt, J.; Seehausen, H.; Möller, F.; Wein, L. (2023): Forcing LES in Seamless Hybrid RANS-LES Methods by Local Mesh Refinement,  Proceedings of the International Gas Turbine Congress 2023 Kyoto

Seehausen, H.; Cengiz, K.; Wein, L. (2023): Towards Validation of an Eddy-Viscosity-Based Roughness Model Using High-Fidelity Simulations,  Proceedings of the International Gas Turbine Congress 2023 Kyoto

Nghiem, V.D.; Seume, J.R.; Kuschel, M.; Behre, S.; Wein, L. (2023): Influence of Different Tip Gap Geometries on the Performance of a Gas Turbine,  Proceedings of the International Gas Turbine Congress 2023 Kyoto

Lohse, S.; Schuler, J. Fischer, F.; Seume, J.R.; Moreau, S. (2023): On the Aeroacoustic Scaling of Axial Flow Turbines,  Proceedings of the International Gas Turbine Congress 2023 Kyoto
ISBN: 978-4-89111-012-3

Stoewer, M.; Mimic, D. (2023): Influence of Seasonal Ambient Temperature Variations on Compressor Performance Predictions,  Proceedings of the International Gas Turbine Congress (IGTC) 2023; IGTC-2023-227

Blechschmidt,D.; Mimic,M. (2023): A Machine-Learning Approach for the Prediction of Time-Averaged Unsteady Flow in Turbomachinery,  Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition
DOI: https://doi.org/10.1115/GT2023-103914
ISBN: 978-0-7918-8711-0

Blechschmidt,D.; Mimic,M. (2023): Performance Prediction of Cooled Compressors Using Neural Networks,  Proceeding of the International Gas Turbine Congress 2023 Kyoto

Lück, S.; Göing, J.; Wittmann, T.; Mimic, D.; Friedrichs, J. (2023): Fuel cell-based propulsion architectures for short range aircraft,  Proceedings of the International Gas Turbine Congress (IGTC) 2023; IGTC-2023-101

Mimic,D. (2023): Active Flow Control with Variable Injection Rate for Off-Design Operation,  Proceedings of the International Gas Turbine Congress (IGTC) 2023; IGTC-2023-243

Schoen, M.P.; Oettinger, M.; Mimic, D. (2023): Deep and Machine Learning-based Methods for Defect Classification in Jet Engines,  Proceedings of 2023 Intermountain Engineering, Technology and Computing (IETC)
DOI: 10.1109/IETC57902.2023.10152188

Eggers, T.; Friedrichs, J.; Goessling, J.; Seume, J.R.; Flüh, J.; Lindemann, J.; Paletta, N. (2023): Effect of 3D Blade Design on the Aerodynamic, Aeroelastic and Structural Behavior of a Scaled UHBR Fan,  Journal of Physics Conference Series 2526(1), 12th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons"
DOI: 10.1088/1742-6596/2526/1/012032

Goessling, J.; Seume, J.R. (2023): High-speed Digital Image Correlation (DIC) for Measuring Deformation and Vibration of Fast Rotating Fan Blades,  Journal of Physics Conference Series 2526(1), 12th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons"
DOI: 10.1088/1742-6596/2526/1/012075

Govers, Y.; Gnebner, K.; Wölk, P.; Seume, J.R. (2023): German Research Wind Farm WiValdi: Planning, installation and Testing of Innovative Research Instrumentation for Six Wind Turbine Rotor Blades,  Wind Energy Science Conference 2023, Glasgow, United Kingdom

Ignatidis, P.; Nghiem, V.D.; Goeing, J.; Oettinger, M.; von der Haar, H.; Friedrichs, J.; Seume, J.R.; Dinkelacker, F. (2022): Mixing Behaviour and Propagation of Combustion Chamber Defects in an Aircraft Engine,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Chania22
DOI: 10.33737/gpps22-tc-103

Nachtigal, P.; Kentschke, T.; Seume, J.R. (2022): Experimentally Validated Design of an Anode Recirculation Blower for PEM Fuel Cells Under Variable Fluid Composition,  Proceedings of the ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. Rotterdam, Netherlands. June 13–17, 2022
DOI: 10.1115/GT2022-80525
ISBN: 978-0-7918-8602-1

Lück, S.; Schödel, M.; Menze, M.; Göing, J.; Seume, J.R.; Friedrichs, J. (2022): Impact of Compressor and Turbine Operating Range Extension on the Performance of an Electric Turbocharger for Fuel Cell Applications,  Proceedings of the ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. Rotterdam, Netherlands. June 13–17, 2022
DOI: 10.1115/GT2022-82974
ISBN: 978-0-7918-8605-2

Stania, L.; Seume, J.R. (2022): Robust Probabilistic Analysis of Deterioration-Induced Aeroelasticity in an Axial Turbine,  ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition
DOI: 10.1115/GT2022-82628
ISBN: 978-0-7918-8607-6

Goessling J.; Seume, J. R.; Flüh, J.P.; Paletta, N.; Eggers, T.; Friedrichs, J.; Natale, N. (2022): Aerodynamic Damping of Composite UHBR Fans Under the Consideration of Acoustic Intake Reflections,  Proceedings of the ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. Rotterdam, Netherlands. June 13–17, 2022
DOI: 10.1115/GT2022-81777

Amer, M.; Schmid, S.; Paehr, M.; Panning-von Scheidt, L.; Seume, J.R. (2022): Optimal Sensor Placement and Model Updating of Axial Compressor Casing Components,  Proceedings of the 40th IMAC, A Conference and Exposition on Structural Dynamics 2022
DOI: 10.1007/978-3-031-05445-7
ISBN: 978-3-031-05444-0

Armanidis, K.; Seume, J.R. (2022): Development of a Partial Admission Turbine for Fuel Cell Applications,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Chania22
DOI: 10.33737/gpps22-tc-48

Kim, H. R.; Mimic, D.; Seume, J. R. (2022): Influence of Mode Shape on Forced Response of a Low-Pressure Compressor,  Proceedings of the Global Power and Propulsion Society Xi’an Conference
DOI: 10.33737/gpps21-tc-338

Kurth, S.; Cengiz, K.; Wein, L..; Seume, J.R. (2022): From Measurement To Simulation A Review Of Aerodynamic Investigations Of Real Rough Surfaces By DNS,  Global Power and Propulsion Society (GPPS), Xi'an, China, GPPS-TC-2021-0213
DOI: 10.33737/gpps21-tc-213
ISBN: 2504-4400

Ahrens, J. D., Kurth, S.; Cengiz, K.; Wein, L.; Seume, J.R. (2022): Immersed Boundary Method For The Investigation Of Real Surfaces With Isotropic And Anisotropic Roughness Components,  Global Power and Propulsion Society (GPPS), Xi'an, China, GPPS-TC-2021-0214
DOI: 10.33737/gpps21-tc-214
ISBN: 2504-4400

Paletta, N.; Flüh, J.; Lindemann, J.; Seume, J.; Goessling, J.; Friedrichs, J.; Eggers, T.; Russo, S.; Natale, N.; Vlachos, D.; Mazarakos, D.; Baltopoulos, A.; Vavouliotis, A. (2022): The Preliminary Design of a Scaled Composite UHBR Fan for a Wind Tunnel Test Campaign,  Aviation & Space to the Satisfaction of the European Citizens, September 01-03, Salerno
DOI: 10.1088/1757-899x/1226/1/012041

Schwerdt, L.; Maroldt, N.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J.R. (2022): An Improved Reduced Order Model for Bladed Disks Including Multistage Aeroelastic and Structural Coupling,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Chania22
DOI: 10.33737/gpps22-tc-106

Sagan, L.; Kuestner, C.; Eilts, P.; Seume, J.R. (2022): Axial Turbine Turbocharger for Charging a Lean-Burn Gasoline Engine,  SAE Technical Paper 2022-01-0377.2022
DOI: 10.4271/2022-01-0377

Ahrens, J. D.; Ziesse, M; Wein, L.; Seume, J.R. (2022): A Novel And Cost-effective Approach to Simulating Dynamic Stall on Rotating Wind Turbine Blades with a Changing Angle of Attack,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Chania22
DOI: 10.33737/gpps22-tc-13

Cengiz, K.; Kurth, S.; Wein, L.; Seume, J.R. (2022): Implicit Large-Eddy-Simulation of a Rough Turbine Blade Using Highorder Curved Elements,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Chania22
DOI: 10.33737/gpps22-tc-21

Kurth, S.; Cengiz,, K.; Möller, D.; Wein, L.; Seume, J.R. (2022): Modelling the Influence of Roughness Skewness on Wall Bounded Flows by Systematic Roughness Variation,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Chania22
DOI: 10.33737/gpps22-tc-38

Wein, L; Seume, J.R. ; Schmierer, R., Herbst, F. (2022): Large-Eddy-Simulation of Labyrinth Seal Flows,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Chania22
DOI: 10.33737/gpps22-tc-4

Cengiz, K., Kurth, S., Wein, L., & Seume, J.R. (2022): Use of High-Order Curved Elements for Direct and Large-Eddy-Simulation of Flow over Rough Surfaces,  Conference on Modelling Fluid Flow (CMFF’22), The 18th International Conference on Fluid Flow Technologies. Budapest, Hungary

Goeing, J.; Seehausen, H.; Stania, L.; Nuebel, N.; Salomon, J.; Ignatidis, P.; Dinkelacker, F.; Beer, M.; Denkena, B.; Seume, J.R.; Friedrichs, J. (2022): Virtual Process for Evaluating the Influence of Real Combined Module Variations on the Overall Performance of an Aircraft Engine,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Chania22
DOI: 10.33737/gpps22-tc-89

Menze, M.; Schödel, M.; Seume, J.R. (2021): Numerical Investigation of a Radial Turbine with Variable Nozzle Turbine Geometry for Fuel Cell Systems in Automotive Applications,  Proceedings of 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ETC14, 2021; Gdansk, Poland, ETC2021-748

Schödel, M.; Menze, M.; Seume, J.R. (2021): Numerical Investigation of a Centrifugal Compressor with various Diffuser Geometries for Fuel Cell Applications,  Proceedings of 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ETC, Danzig, Polen, ETC2021-686

Kuestner, C.; Seume, J.R. (2021): Axial-Radial Diffuser With Integrated Exhaust Hood for An Automotive Turbocharger With Axial Turbine,  Proceedings of ASME Turbo Expo 2021 & Turbomachinery Technical Conference and Exposition T2021, June 07-11, 2021, Virtual Conference
DOI: 10.1115/GT2021-58600
ISBN: 978-0-7918-8493-5

Ziesse, M.; Seume J. R. (2021): Data Science-Based Trend Analysis in Research and Development of Turbomachinery,  Proceedings of Global Power and Propulsion Society. ISSN-Nr: 2504-4400. GPPS Xi’an21
DOI: 10.33737/gpps21-tc-286

Armanidis, K.; Seume, J.R. (2021): Dynamische Simulation von Abgasturbinen für Brennstoffzellenanwendungen,  FC³ - 2nd Fuel Cell Conference Chemnitz 2022 - Saubere Antriebe. Effizient Produziert
ISBN: 978-3-96100-136-1

Amer, M.; Paehr, M.; Panning-von Scheidt, L.; Schmied, J.; Seume, J.R. (2021): Determining the Influence of Casing Vibrational Behaviour on Rotordynamics,  SIRM 2021, 14th International Conference on Dynamics of Rotating Machines, Gdansk, Poland, 17th - 19th February 2021

Mimic, D.; Sauer, P.; Seume, J. R. (2021): Sensitivity of Compressor Performance and Tip-Leakage Vortices to Inhomogeneous Casing Heat-Flux Distributions,  Proceedings of the Global Power and Propulsion Society Xi’an Conference
DOI: 10.33737/gpps21-tc-337

Eggers, T., Friedrichs, J., Gößling, J., Seume, J.R., Natale, N., Flüh, J.P., Paletta, N. (2021): Composite UHBR Fan for Forced Response and Flutter Investigations,  Proceedings of ASME Turbo Expo 2021 & Turbomachinery Technical Conference and Exposition T2021, June 07-11, 2021, Virtual Conference
DOI: 10.1115/GT2021-58941

Lehnhoff, S.; Kidambi S.A.P.; van Dooren, M.F.; Kühn, M.; Seume, J.R. (2020): Full-Scale Rotor Blade Deformation Measurements in Comparison with Aeroelastic Simulations Based on Measured High-Resolution Wind Fields,  The Science of Making Torque from Wind (TORQUE 2020), Journal of Physics: Conference Series, Vol. 1618, Delft, Netherlands
DOI: 10.1088/1742-6596/1618/5/052036

Nachtigal, P.; Rätz, H.; Mai, H.; Seume, J.R. (2020): Design and Validation of a Pulse Generator for the Pulse Shaping of the Turbine Inlet Pressure at the Hot-Gas Test Bench,  14th International Conference on Turbochargers and Turbocharging, Institution of Mechanical Engineers, CRC Press, S. 48-61
DOI: 10.1201/9781003132172
ISBN: 978-0-367-67645-2

Kluge, T.; Lettmann, I.; Oettinger, M.; Wein, L.; Seume, J. R. (2020): Unsteady Flow Phenomena in Turbine Shroud Cavities,  Proceedings of the Global Power and Propulsion Society, Global Power and Propulsion Society, GPPS-CH-2020-0064
DOI: 10.33737/gpps20-tc-64
ISSN: 2504-4400

Wein, L.; Kluge, T.; Hain, R.; Fuchs, T.; Kähler, C.; Schmierer, R.; Herbst, F.; Seume, J. R. (2020): Validation of RANS Turbulence Models for Labyrinth Seal Flows by Means of Particle Image Velocimetry,  Proceedings of ASME Turbo Expo 2020, 21.-25.September, 2020, London, UK, GT2020-14885
DOI: 10.1115/GT2020-14885
ISBN: 978-0-7918-8421-8

Zeh, C.; Willers, O.; Hagemann, T.; Schwarze, H.; Seume, JR. (2020): Evaluation of the Rotor Temperature Distribution of an Automotive Turbocharger Under Hot Gas Conditions Including Indirect Experimental Validation,  Proceedings of ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, GT2020, June 22-26, 2020, London, England, GT2020-16077
DOI: 10.1115/GT2020-16077
ISBN: 978-0-7918-8408-9

Ziaja, K.; Post, P.; Sembritzky, M.; Schramm, A.; Willers, O.; Kunte, H.; di Mare, F.; Seume, J.R. (2020): Numerical Investigation of a Partially Loaded Supersonic ORC Turbine Stage,  Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, GT2020-15645, September 21-15, 2020
DOI: 10.1115/GT2020-15219

Oettinger, M.; Henke, M.; Seume, J. R. (2020): Effect of Diffusor Inhomogeneity on Full-Annulus Axial Turbine Performance,  Proceedings of the Global Power and Propulsion Society (GPPS) Chania Conference, 7-9 September, 2020, Chania, Greece. Global Power and Propulsion Society. Paper GPPS-CH-2020-0139
DOI: 10.33737/gpps20-tc-139

Schmid, M; Seume, J.R. (2020): Design of an Aerofoil for Small Wind Turbines with a Focus on Turbulent Inflow Conditions,  Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0066
DOI: 10.33737/gpps20-tc-66

Lohse, S.; Fischer, F.; Koch, R.; Moreau, S.; Seume, J.R. (2020): Aeroacoustic Numerical Investigations of a Scaled Compressor Cascade,  Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th – 9th September, 2020, GPPS-CH-2020-0094
DOI: 10.33737/gpps20-tc-94

Zieße, M.; Wein, L.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R. (2020): Validation of a Synthetic-Eddy Method for Modelling Incoming Wakes in Scale-Resolving Simulations of Turbomachinery Cascades,  Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania20, 7th– 9th September, 2020, GPPS-CH-2020-0017
DOI: 10.33737/gpps20-tc-17

Wang, P.; Vera-Morales, M.; La, P.; Zangeneh, M.; Maroldt, N.; Willers, O.; Kauth, F.; Seume, J.R. (2020): Design of a Mixed-Flow Transonic Compressor for Active High-Lift System Using a 3D Inverse Design Methodology,  Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition GT2020, September 21-25, 2020, Virtual, Online, GT2020-15645
DOI: 10.1115/GT2020-15645
ISBN: 978-0-7918-8410-2

Goeing, J.; Seehausen, H.; Herbst, F.; Bode, C.; Friedrichs J.; Seume, J. R. (2020): Performance Simulation of Roughness Induced Module Variations of a Jet Propulsion by Using Pseudo Bond Graph Theory,  Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, GT2020-14456
DOI: 10.1115/GT2020-14456
ISBN: 978-0-7918-8405-8

Goeing, J.; Seehausen, H.; Pak, V.; Lueck, S.; Friedrichs J.; Seume, J. R. (2020): Influence of Combined Compressor and Turbine Deterioration on the Overall Performance of a Jet Engine Using RANS Simulation and Pseudo Bond Graph Approach,  Proceedings of Global Power and Propulsion Society (GPPS) Chania20, GPPS-CH-2020-0140
DOI: 10.33737/gpps20-tc-140

Alldieck, R.; Seehausen, H.; Herbst, F.; Seume, J. R. (2020): The Effect of Rough-Wall Boundary Condition on RANS-Based Transition Prediction,  Proceedings of Global Power and Propulsion Society (GPPS) Chania20, GPPS-CH-2020-0053
DOI: 10.33737/gpps20-tc-53

Schinnerl, M.; Bogner, M.; Ehrhard, J. (2019): Improving Accuracy and Comparability of Turbocharger Performance Measurements,  Turbo Expo: Power for Land, Sea, and Air. Vol. 58714, American Society of Mechanical Engineers, V008T26A004, Phoenix, Arizona, USA
DOI: 10.1115/GT2019-90250

Oettinger, M.; Mimic, D.; Henke, M.; Schmunk, O.; Seume, J. R. (2019): Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure Turbine,  Proceedings of Global Power and Propulsion Society (GPPS) Beijing Conference, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0207
DOI: 10.33737/gpps19-bj-207

Mimic, D.; Oettinger, M.; Sauer, P.; Herbst, F. (2019): Shock–Vortex Interaction in a Transonic Turbine Cascade,  Proceedings of Global Power and Propulsion Society (GPPS) Beijing Conference 2019, 16-18 September, 2019, Beijing, China. Paper GPPS-BJ-2019-0008
DOI: 10.33737/gpps19-bj-008

Mimic, D.; Herbst, F. (2019): Influence of Transonic Flow on the Tip-Leakage Vortex in a Turbine Cascade,  Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-082

Zieße, M.; Müller-Schindewolffs, C.; Herbst, F.; Seume, J.R. (2019): Enhanced Synthetic-Eddy-Method for Generating Moving Incoming Wakes and Turbulence in Scale-Resolving Simulations,  Proceedings of the International Gas Turbine Congress 2019, 17–22 November 2019, Tokyo, Japan, 66

Seehausen, H.; Gilge, P.; Kellersmann, A.; Friedrichs, J.; Herbst, F. (2019): Numerical Study of Stage Roughness Variations in a High Pressure Compressor,  International Journal of Gas Turbine, Propulsion and Power Systems. 11 (3): 16–25
DOI: 10.38036/jgpp.11.3_16

Kauth, F.; Maroldt, N.; Seume, J. R.; (2019): Experimental Validation of a Compact Mixed-Flow Compressor for an Active High-Lift System,  IOP Conference Series: Materials Science and Engineering: Volume 643, Number 1
DOI: 10.1088/1757-899X/643/1/012142

Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J. (2019): Analytical, Experimental and Numerical Investigations on the Impeller Backplane Pressure Distribution of a High-Speed Centrifugal Compressor,  4th International Rotating Equipment Conference (IREC), Wiesbaden

Mimic, D.; Oettinger, M.; Jätz, C.; Herbst, F.; Seume, J. R. (2019): Thermal End-Wall Contouring,  Proceedings of ASME Turbo Expo 2019, 17–21 June 2019, Phoenix, USA, GT2019-90191
DOI: https://doi.org/10.1115/GT2019-90191
ISBN: 978-0-7918-5858-5

Kluge, T.; Wein, L.; Schmierer, R.; Seume, J.R. (2019): Sensitivity Analysis, Design, Instrumentation, and Experimental Validation of a Novel Labyrinth Seal Rig,  Proceedings of the ETC 13, European Turbomachinery Society, ETC2019-078
DOI: 10.29008/ETC2019-078

Oettinger, M.; Henke, M.; Herbst, F.; Seume, J. R. (2019): Axial-Gap Size Effect on the Unsteady Flow Field at Midspan in a 1.5-Stage Low-Pressure Turbine,  Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-084

Schwarzbach, F.; Mimic, D.; Herbst, F. (2019): Profile Aerodynamics of an Oscillating Low-Pressure–Turbine Blade,  Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-048

Du, J.; Kauth, F.; Li, J.; Zhang, Q.; Seume, J.R. (2018): Experimental Study on the Influence of Casing Treatment on Near-Stall Unsteady Behavior of a Mixed-Flow Compressor,  Proceedings of ASME Turbo Expo, ASME, Phoenix, Arizona, USA, GT2019-92034
DOI: 10.1115/GT2019-92034

(2018): The Effect of the Turbulent Scales on Low-Pressure Turbine Cascade Aerodynamics Part B: Scale Resolving Simulations,  Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75163
DOI: 10.1115/GT2018-75163

De Buhr, L.; Fleige, H.-U.; Seume, J.R. (2018): Model Tests on the Control Behavior of a Test Air Supply System in Open or Closed-Loop Operation,  Int. Conf. on Screw Machines 2018, Dortmund, 18.+19. Sept. 2018
DOI: 10.1088/1757-899X/425/1/012021

Mimic, D.; Jätz, C.; Sauer, P.; Herbst, F. (2018): Total Pressure Loss Reduction in Annular Diffusers,  Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS01

Mimic, D.; Jätz, C.; Herbst, F. (2018): Increasing Boundary Layer Stability for Varying Degrees of Diffuser Loading,  Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0006
DOI: 10.5281/zenodo.1345494

Fischer, T.; kleine Sextro, T.; Seume, J.R.; Flinte, J.; Eilts, P. (2018): Flow Range of Variable Cross-Section Compressors,  Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK

Maehler, L.; Willeke, T.; Seume, J.R. (2018): Numerical Prediction of the Notch Effect of Riblets on Axial Compressor Blades,  Proceedings of the Global Power and Propulsion Forum (GPPF), GPPS, 07-09 May 2018, Montreal, Canada, GPPS-2018-0025
DOI: 10.5281/zenodo.1342723

Hartung, K.; Gilge, P.; Herbst, F. (2018): Towards Immersed Boundary Methods for Complex Roughness Structures in Scale-Resolving Simulations,  32nd European Conference on Modelling and Simulation (ECMS 2018), 22-25 May 2018, Wilhelmshaven, Germany
DOI: 10.7148/2018-0005
ISBN: 78-0-9932440-6-3

Kauth, F.; Narjes, G.; Müller, J.-K.; Mertens, A.; Ponick, B.; Seume, J.R. (2018): Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future Aircraft,  Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-2018-0026
DOI: 10.5281/zenodo.1342725

Hauptmann, T.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of Forced Response Methods in a Multi-Stage Axial Turbine,  Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75390
DOI: 10.1115/GT2018-75390
ISBN: 978-0-7918-5115-9

Wein, L.; Seume, J.R.; Herbst, F. (2018): Unsteady Flow in a Labyrinth Seal,  Proceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 07-09 May 2018, Montreal, Canada, GPPS-NA-2018-0036
DOI: 10.15488/4239

Hartmann, U.; Seume, J.R. (2018): Automated Condition Evaluation of Hot-Gas Path Components of Jet Engines through Exhaust Jet Analysis,  Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Oslo, Norway, GT2018-75384
DOI: 10.1115/GT2018-75384
ISBN: 978-0-7918-5112-8

Müller-Schindewolffs, C.; Herbst, F. (2018): The Effect of Turbulent Scales on Low-Pressure Turbine Aerodynamics - Part A: An optimized Turbulent Boundary-Condition,  Proceedings of the ASME Turbo Expo 2018, 11-15 June 2018, Lillestrøm, Norway, GT2018-75162
DOI: 10.1115/GT2018-75162

Frieling, D.; Griebel, A.; Wein, L.; Seume, J.R.; Herbst, F. (2018): The Influence of Rotor-Wakes on Boundary Layer Development in an Axial Compressor and its Numerical Prediction,  Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75631
DOI: 10.1115/GT2018-75631
ISBN: 978-0-7918-5099-2

Fischer, T.; Willers, O.W.; Seume, J.R. (2018): Preliminary Design of a Partial Admission Turbine for the Waste Heat Recovery in Fuel Cells,  Proceedings of 13th International Conference on Turbochargers and Turbocharging (IMechE), 16.-17.May 2018, London, UK

Schwarzbach F.; Müller-Schindewolffs Ch.; Bode, Ch.; Herbst, F. (2018): Effect of the Turbulent Scales on Low-Pressure Turbine Cascade Aerodynamics Part B: Scale Resolving Simulations,  Proceedings of the ASME Turbo Expo 2018, 11-15 June, 2018, Oslo, Norway, GT2018-75163
DOI: https://doi.org/10.1115/GT2018-75163

Meinzer, C.E.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J.R. (2018): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine Shafts,  Proceedings of the Global Power & Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS), 10-12 January 2018, Zurich, Switzerland, GPPS-2018-0016

Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J.; Berger, R.; Rolfes, R.; Keller, C.; Seume, J.R. (2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and Mistuning,  Proceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142, 2017, GPPS-2017-0142

Schinnerl, M.; Ehrhard, J.; Bogner, M.; Seume, J.R. (2017): Correcting Turbocharger Performance Measurements for Heat Transfer and Friction,  Proceedings of the ASME Turbo Expo 2017, 26-30 June 2017, Charlotte, NC, USA, GT2017-64283
DOI: 10.1115/GT2017-64283
ISBN: 978-0-7918-5095-4

Du, J.; Seume, J.R. (2017): Design of Casing Treatment on a Mixed-Flow Compressor,  Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-65226
DOI: 10.1115/GT2017-65226
ISBN: 978-0-7918-5078-7

Fischer, T.; Burgmann, S.; Rudersdorf, M.; Seume, J.R. (2017): Partially Vaned Diffuser With Variable Cross-Section for Centrifugal Fans,  Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA
DOI: 10.1115/GT2017-63965
ISBN: 978-0-7918-5077-0

Willers, O.W.; Kunte, H; Seume, J.R. (2017): Supersonic Impulse Turbine for Organic Rankine Cycle (ORC) Truck Applications,  26th Aachen Colloquium Automobile and Engine Technology, 9-11 October 2017, Aachen; proceedings pp. 1557-1570, Aachener Kolloquium Fahrzeug- und Motorentechnik GbR, Aachen
ISBN: 978-3-00-054182-7

Bode, C.; Friedrichs, J.; Frieling, D.; Herbst, F. (2017): Improved Turbulence Prediction in Turbomachinery Flows and The Effect on Three-Dimensional Boundary Layer Transition,  International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ISROMAC 2017, 16-21 December, 2017, Maui, Hawaii
DOI: 10.3390/ijtpp3030018

Mimic, D.; Jätz, C.; Herbst, F. (2017): Correlation Between Total Pressure Losses of Highly Loaded Annular Diffusers and Integral Stage Design Parameters,  Proceedings of Shanghai 2017 Global Power and Propulsion Forum, 30 October – 1 November, 2017, Shanghai, China, GPPS-2017-0063
DOI: 10.22261/JGPPS.I9AB30

Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction,  Proceedings of 12th European Conference on Fluid Dynamics & Thermodynamics, April 3-7, Stockholm, Sweden, ETC2017-242
DOI: 10.29008/ETC2017-242

Keller, C.; Kellersmann, A.; Friedrichs, J.; Seume, J.R. (2017): Influence of Geometric Imperfections on Aerodynamic and Aeroelastic Behavior of a Compressor Blisk ,  Proceedings of ASME Turbo Expo 2017, June 26-30, 2017, Charlotte, NC, USA, GT2017-63556
DOI: 10.1115/GT2017-63556

Willeke, T.; Hellberg, M.; Seume, J.R. (2017): A Numerical Concept Study on Internal Blade Cooling in Axial Compressors,  Proceedings of the ETC 12, 3-7 April 2017, Stockholm, Sweden, ETC2017-106
DOI: 10.29008/ETC2017-106

Miro, S.; Broggi, M.; Beer, M.; Willeke, T.; Seume, J.R. (2017): Survival Signature Approach for the Reliability Analysis of an Axial Compressor,  27th European Safety and Reliability Conference ESREL, 18 – 22 June 2017, Portorož, Slovenia

Mimic, D.; Drechsel, B.; Herbst, F. (2017): Correlation Between Pressure Recovery of Highly Loaded Annular Diffusers and Integral Stage Design Parameters,  Proceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-63586
DOI: 10.1115/GT2017-63586

Wein, L.; Seume, J.R.; Herbst, F. (2017): Improved Prediction of Labyrinth Seal Performance through Scale Adaptive Simulation and Stream Aligned Grids,  Proceedings of the ASME Turbo Expo 2017, 26-30 June, 2017, Charlotte, USA, GT2017-64257
DOI: 10.1115/GT2017-64257

Wolff, T.; Seume, J.R. (2016): Modeling the Transient Aerodynamic Effects During the Motion of a Flexible Trailing Edge,  Journal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 082038
DOI: 10.1088/1742-6596/753/8/082038

Schwerdt, L.; Hauptmann, T.; Kunin, A.; Wallascheck, J.; Wriggers, P.; Panning-von Scheidt, L.; Löhnert, S.; Seume, J.R. (2016): Aerodynamical and Structural Analysis of Operationally used Turbine Blades,  5th International Conference on Through-life Engineering Servies, 1-2 November 2016, Cranfield, England
DOI: 10.1016/j.procir.2016.09.023

Henke, M.; Wein, L.; Kluge, T.; Biester, M.H.-O.; Guendogdu, Y.; Seume, J.R. (2016): Experimental and Numerical Verification of the Core-Flow in a New Low-Pressure Turbine,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57101
DOI: 10.1115/GT2016-57101
ISBN: 978-0-7918-4970-5

Adamczuk, R.R.; Seume, J.R. (2016): Numerical Evaluation of the Condition of a Jet Engine Through Exhaust Jet Analysis,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56947
DOI: 10.1115/GT2016-56947
ISBN: 978-0-7918-4970-5

Ernst, B.; Seume, J.R.; Herbst, F. (2016): Effect of Turbulence and Transition Models on the CFD-based Performance Prediction of Wind Turbines,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56728
DOI: 10.1115/GT2016-56728
ISBN: 978-0-7918-4987-3

Fischer, T.; Raetz, H.; Peters, M.; Seume, J.R. (2016): Low Inertia Centrifugal Compressor Wheels: Influence of Back Disk Cavity on Aerodynamic Losses and Axial Thrust Load,  Proceedings of 12th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, UK
DOI: 10.1177/1687814017690695

Fischer, T.; Rudersdorf, M.; Burgmann, S.; kleine Sextro, T.; Seume, J.R. (2016): Investigation of a Diffuser-Volute Combination with Variable Cross-Sectional Area for Centrifugal Fans ,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56299
DOI: 10.1115/GT2016-56299
ISBN: 978-0-7918-4968-2

von der Haar, H.; Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Defect Detection in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases,  Proceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-57847
DOI: 10.1115/GT2016-57847
ISBN: 978-0-7918-4982-8

Hartmann, U.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysis,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56467
DOI: 10.1115/GT2016-56467
ISBN: 978-0-7918-4982-8

Hauptmann, T.; Seume, J.R. (2016): Aerodynamic Excitation for Variable Tip Gap,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Corea, GT2016-57217
DOI: 10.1115/GT2016-57217
ISBN: 978-0-7918-4984-2

Koepplin, V.; Herbst, F.; Seume, J.R. (2016): Correlation-based Riblet Model for Turbomachinery Applications,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56293
DOI: 10.1115/GT2016-56293

Müller, C.; Baier, R.-D.; Seume, J.R.; Herbst, F. (2016): DNS-Based Analysis of RANS Predictions of a Low-Pressure Turbine Cascade,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-57582
DOI: 10.1115/GT2016-57582
ISBN: 978-0-7918-4971-2

Schinnerl, M.; Seume, J.R.; Ehrhard, J.; Bogner, M. (2016): Heat Transfer Correction Methods for Turbocharger Performance Measurements,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56770
DOI: 10.1115/GT2016-56770
ISBN: 978-0-7918-4986-6

kleine Sextro, T.; Lübbert, N.; Rätz, H.; Seume, J.R. (2016): Heat Flow In a Turbocharger Shaft and its Impact on the Bearing System,  Proceedings of the 12th International Conference on Turbochargers and Turbocharging (IMECHE), 17-18 May, London, England, C6231/110

Hurfar, C.M.; Keller, C.; Mumcu, A.; Seume, J.R. (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 2: Experimental Verification,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56969
DOI: 10.1115/GT2016-56969
ISBN: 978-0-7918-4969-9

Mumcu, A.; Keller, C.; Hurfar, C. M.; Seume, J.R. (2016): An Acoustic Excitation System for the Generation of Turbomachinery Specific Sound Fields – Part 1: Design and Methodology,  Proceedings of the ASME Turbo Expo 2016, 13-17 June 2016, Seoul, South Korea, GT2016-56020
DOI: 10.1115/GT2016-56969
ISBN: 978-0-7918-4969-9

Kunte, H.; Seume, J.R. (2016): Design of a turbine-generator-unit for commercial vehicle ORC applications,  Proceedings of 12th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2016, London, C6231-155

Siemann, J.; Krenz, I.; Seume, J.R. (2016): Experimental Investigation of Aspiration in a Multi-Stage High-Speed Axial-Compressor,  Proceedings of the ASME Turbo Expo 2016, 13-17 June, 2016, Seoul, South Korea, GT2016-56440
DOI: 10.1115/GT2016-56440
ISBN: 978-0-7918-4969-9

Winstroth, J.; Seume, J.R. (2016): On the Influence of Airfoil Deviations on the Aerodynamic Performance of Wind Turbine Rotors,  Journal of Physics: Conference Series, Vol. 753, 05-07 October 2016, Munich, Germany, 022058
DOI: 10.1088/1742-6596/753/2/022058

Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Kauth, F.; Seume, J.R. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift Systems,  ESARS-ITEC Conference, 2-4 November 2016, Toulouse, France
DOI: 10.1109/ESARS-ITEC.2016.7841338

Vorreiter, A; Seume, J.R. (2015): Effects of Circulation Control on a Multi-Stage Axial Compressor,  Proceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, 13-16 July 2015, Lerici, Italy, ISAIF12-094

Kunte, H.; Seume, J.R.; Pautov, D.; Cherkasova, M.; Zabelin, N.; Olennikov, S.; Rassokhin, V. (2015): Supersonic Impulse Turbine for Automotive Waste Heat Recovery: A Comparison of three Designs of Turbine Blade Profiles,  11th European Turbomachinery Conference, 23-27 March 2015, Madrid, Spain, ETC2015-092

Vorreiter, A. (2015): Feasibility Study on a Single-Stage Tandem Axial Compressor for an Active High-Lift-System,  Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

kleine Sextro, T.; Steglich, T.; Seume, J.R. (2015): Variable Inlet Guide Vane Devices for a Turbocharger Compressor,  Proceedings of International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan, IGTC2015-0161
ISBN: 978-4-89111-008-6

Teichel, S.; Verstraete, T.; Seume, J.R. (2015): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift Systems,  Proceedings of the International Gas Turbine Congress 2015, 15-20 November, Tokyo, Japan
ISBN: 978-4-89111-008-6

Hohenstein, S.; Gilge, P.; Seume, J.R. (2015): Experimental Investigation of the Aerodynamic Effect of Local Surface Roughness on a Turbine Blade,  Proceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan, IGTC2015-0078
ISBN: 978-4-89111-008-6

Müller, C.; Herbst, F.; Fiala, A.; Zscherp, C.; Kügeler, E.; Seume, J.R. (2015): Parameter Study for an Improved Prediction of Wake-Induced Transition in Low-Pressure Turbines,  Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan, IGTC2015-0043
ISBN: 978-4-89111-008-6

Drechsel, B.; Seume, J.R.; Herbst, F. (2015): On the Numerical Prediction of the Influence of Tip Flow on Diffuser Stability,  Proceedings of the International Gas Turbine Congress 2015, November 15-20, 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Fischer, T.; Peters, M.; Seume, J.R. (2015): Low Inertia Centrifugal Compressor Wheels: Back Disk Geometry Optimization,  Proceedings of the International Gas Turbine Congress 2015 Tokyo, 15-20 November 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Hartmann, U.; Seume, J.R. (2015): Application of an Algebraic Reconstruction Algorithm to Tomographic BOS Measurements,  Proceedings of the International Gas Turbine Congress 2015, 15-20 November, 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Hauptmann, T.; Aschenbruck, J.; Seume, J.R. (2015): Forced Response Excitation due to Variances in a Multi-Stage Axial Turbine,  Proceedings of the International Gas Turbine Congress 2015, 15-20 November 2015, Tokyo, Japan
ISBN: 978-4-89111-008-6

Brand, C.R.; Seume, J.R. (2015): Flaps for Wind Turbine Applications: Results of an Acoustic Study,  Proceedings of the EWEA Annual Event, 17-20 November 2015, Paris, France

Keller, C.; Willeke, T.; Burrafato, S.; Seume, J.R. (2015): Design Process of a 1.5-Stage Axial Compressor for Experimental Flutter Investigations,  Proceedings of the International Gas Turbine Congress, 15-20 November 2015, Tokyo, Japan, IGTC2015-0141
ISBN: 978-4-89111-008-6

Drechsel, B.; Müller, C.; Herbst, F.; Seume, J.R. (2015): Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part B: Scale-Resolving Simulations,  Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42477
DOI: 10.1115/GT2015-42477
ISBN: 978-0-7918-5663-5

Siemann, J.; Seume, J.R. (2015): Design of an Aspirated Compressor Stator by Means of DOE,  Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42474
DOI: 10.1115/GT2015-42474
ISBN: 978-0-7918-5663-5

Kuschel, M.; Drechsel, B.; Kluß, D.; Seume, J.R. (2015): Influence of Turbulent Flow Characteristics and Coherent Vortices on the Pressure Recovery of Annular Diffusers Part A: Experimental Results,  Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42476
DOI: 10.1115/GT2015-42476
ISBN: 978-0-7918-5663-5

Meinzer, C.; Bittner, S.L.; Schmitt, S.; Kielb, R.E.; Seume, J.R. (2015): Design of a Single Stage Turbine for the Quantification of Aerodynamic Damping,  Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2015-42641
DOI: 10.1115/GT2015-42641
ISBN: 978-0-7918-5677-2

Winstroth, J.; Seume, J.R. (2015): Error Assessment of Blade Deformation Measurements on a Multi-Megawatt Wind Turbine Based on Digital Image Correlation,  Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-43622
DOI: 10.1115/GT2015-43622
ISBN: 978-0-7918-5680-2

Hurfar, M.; Bartelt, M.; Seume, J.R. (2015): A Scaling Method for Modal Sound Propagation in Annular Ducts,  Proceedings of the ASME Turbo Expo 2015, 15-19 June, 2015, Montréal, Canada, GT2014-42839
DOI: 10.1115/GT2015-42839
ISBN: 978-0-7918-5664-2

Denkena, B.; Böß,V.; Nespor, D.; Gilge, P.; Hohenstein, S.; Seume, J.R. (2015): Prediction of the 3D Surface Topography after Ball End Milling and its Influence on Aerodynamics,  Conference on Modelling of Machining Operations (15th CMMO), 11-12 Juni, Karlsruhe, Germany
DOI: 10.1016/j.procir.2015.03.049

Aschenbruck, J.; Hauptmann, T.; Seume, J.R. (2015): Influence of Multi-Hole Pressure Probes on the Flow-Field in Axial-Turbines,  Proceedings of 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-155

Kluge, T.; Henke, M.; Seume, J.R. (2015): Comparison of Different Methods for the Analysis of Time-Resolved Flow Field Measurements in an Axial Turbine,  Proceedings of the ETC 11, 23-26 March 2015, Madrid, Spain, ETC2015-189

Von Seggern, H.; Seume, J.R.; Vorreiter, A. (2015): Measuring the Dynamic Thinning Process of Free Fluid Films with LED-IF,  Proceedings of the 12th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, 13-16 July 2015, Lerici, Italy, ISAIF12-093

Flores, D.; Seume, J.R. (2015): The Influence of Labyrinth Flows on the Aerodynamic Performance of an Axial Compressor,  Proceedings of 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23-26 March 2015, Madrid, Spain, ETC2015-117

Winstroth, J.; Schön, L.; Ernst, B.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: A Comparison to Aeroelastic Simulations of a Multi-Megawatt Wind Turbine ,  The Science of Making Torque from Wind 2014, Journal of Physics: Conference Series, 18-20 June 2014, Copenhagen, Denmark
DOI: 10.1088/1742-6596/524/1/012064

Wolff, T.; Ernst, B.; Seume, J.R. (2014): Aerodynamic Behavior of an Airfoil with Morphing Trailing Edge for Wind Turbine Applications,  The Science of Making Torque from Wind 2014, 18-20 June 2014, Copenhagen, Denmark
DOI: 10.1088/1742-6596/524/1/012018

Ernst, B.; Schmitt, H.; Seume, J.R. (2014): Effect of Geometric Uncertainties on the Aerodynamic Characteristic of Offshore Wind Turbine Blades,  The Science of Making Torque from Wind 2012, Journal of Physics: Conference Series, Oldenburg, Germany
DOI: 10.1088/1742-6596/555/1/012033

Witthaus, S.; Seume, J.R. (2014): Boundary Condition for the Implementation of Arbitrary Acoustical Modes,  inter.noise 2014, 43rd International Congress on Noise Control Engineering, 16-19 November 2014, Melbourne, Australia

Aschenbruck, J.; Adamczuk, R.; Seume, J.R. (2014): Recent Progress in Turbine Blade and Compressor Blisk Regeneration,  3rd International Through-life Engineering Services Conference, EPSRC Centres for Innovative Manufacturing, 4-5 November 2014, Cranfield, England
DOI: 10.1016/j.procir.2014.07.016

Wolff, T.; Herbst, F.; Freund, O.; Le, L.; Seume, J.R. (2014): Validating the Numerical Prediction of the Aerodynamics of an Axial Compressor,  Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25530
DOI: 10.1115/GT2014-25530
ISBN: 978-0-7918-4561-5

Pohle, L.; Aschenbruck, J.; Panning- von Scheidt, L.; Seume, J.R.; Wallaschek, J. (2014): Dynamic Behaviour of a Mistuned Air Turbine: Comparison between simulations and measurements,  Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-26025
DOI: 10.1115/GT2014-26025
ISBN: 978-0-7918-4577-6

Aschenbruck, J.; Seume, J.R. (2014): Experimentally Verified Study of Regeneration-Induced Forced Response in Axial Turbines,  Proceedings of the ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany, GT2014-25664
DOI: 10.1115/GT2014-25664
ISBN: 978-0-7918-4577-6

Porzig, D.; Raetz, H.; Schwarze, H.; Seume, J.R. (2014): Thermal Analysis of Small high-speed floating-ring Journal bearings,  Proceedings of 11th International Conference on Turbochargers and Turbocharging (IMechE), 13-14 May 2014, London, UK

Flores, D.; Seume, J.R. (2014): Selecting Cavity Geometries for Improving the Aerodynamic Performance of an Axial Compressor,  Proceedings of the ASME Turbo Expo 2014, 16-20 June 2014, Düsseldorf, Germany, GT2014-25328
DOI: 10.1115/GT2014-25328
ISBN: 978-0-7918-4560-8

Bartelt, M.; Laguna, J.D.; Seume, J.R. (2013): Synthetic Sound Source Generation for Acoustical Measurements in Turbomachines,  Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95045
DOI: 10.1115/GT2013-95045
ISBN: 978-0-7918-5524-9

Herbst, F.; Fiala, A.; Seume, J.R. (2013): Modelling Vortex Generating Jet-Induced Transition in Low-Pressure Turbines,  Proceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, USA, GT2013-94962
DOI: 10.1115/GT2013-94962
ISBN: 978-0-7918-5523-2

Kunte, H.; Seume J.R. (2013): Design of a Partial Admission Impulse Turbine for an Automotive ORC-Application,  2nd International Seminar on ORC Power Systems, ASME, 7-8 October 2013, Rotterdam, Netherlands

Adamczuk, R.; Hartmann, U.; Seume, J.R. (2013): Experimental Demonstration of Analyzing an Engine’s Exhaust Jet with the Background-Oriented Schlieren Method,  AIAA Ground Testing Conference, 24-27 June 2013, San Diego, USA

Belz, J.; May, M.; Siemann, J.; Seume, J.R.; Voigt, C.; Boehmer, H.; Grueber, B. (2013): Excited Blade Vibration for Aeroelastic Investigations of a Rotating Blisk using Piezo-Electric Macro Fiber Composites,  Proceedings of the ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA, GT2013-95735
DOI: 10.1115/GT2013-95735
ISBN: 978-0-7918-5527-0

Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Impact of Defects and Damage in Aircraft Engines on the Exhaust Jet,  Proceedings of the ASME Turbo Expo, ASME, 3-7 June 2013, San Antonio, USA, GT2013-95709
DOI: 10.1115/GT2013-95079
ISBN: 978-0-7918-5513-3

Adamczuk, R.; Seume, J.R. (2013): Early Assessment of Defects and Damage in Jet Engines,  2nd International Through-life Engineering Services Conference, 2013, Cranfield, England
DOI: 10.1016/j.procir.2013.07.022

Hohenstein, S.; Aschenbruck, J.; Seume, J.R. (2013): Aerodynamic Effects of Non-Uniform Surface Roughness on a Turbine Blade,  Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT-2013-95433
DOI: 10.1115/GT2013-95433
ISBN: 978-0-7918-5522-5

Hohenstein, S.; Seume J.R. (2013): Numerical Investigation on the Influence of Anisotropic Surface Structures on the Skin Friction,  Proceedings of 10th European Conference on Turbomachinery (ETC), 15-19 April 2013, Lappeenranta, Finnland

Aschenbruck, J.; Meinzer, C.E.; Pohle, L.; Panning-von Scheidt, L.; Seume, J.R. (2013): Regeneration-Induced Forced Response in Axial Turbines,  Proceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95431
DOI: 10.1115/GT2013-95431
ISBN: 978-0-7918-5527-0

Aschenbruck, J.; Meinzer, C.E.; Seume, J.R. (2013): Influence of Regeneration-Induced Variances of Stator Vanes on the Vibration Behavior of Rotor Blades in Axial Turbines,  Proceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-113

Biester, M. H.-O.; Karapetrow, D.;Seume, J.R. (2013): Effect of the Tip Clearance on End Wall Heat-Transfer in a HP Turbine,  Proceedings of the ASME Turbine Blade Tip Symposium, 30 September - 3 October 2013, Hamburg, Germany, TBTS2013-2069
DOI: 10.1115/TBTS2013-2069
ISBN: 978-0-7918-5607-9

Biester, M. H.-O.; Wiegmann, F.; Guendogdu, Y.;Seume, J.R. (2013): Time-Resolved Numerical Study of Axial Gap Effects on Labyrinth-Seal Leakage and Secondary Flow in a LP Turbine,  Proceedings of the ASME Turbo Expo 2013, 3-7 June, 2013, San Antonio, USA, GT2013-95628
DOI: 10.1115/GT2013-95628
ISBN: 978-0-7918-5522-5

Laguna, J.D.; Bartelt, M.; Seume, J.R. (2013): Impact of Swirl on the Sensitivity of the Radial Mode Analysis in Turbomachinery,  Proceedings of the ASME Turbo Expo, 3-7 June 2013, San Antonio, USA, GT2013-95460
DOI: 10.1115/GT2013-95460
ISBN: 978-0-7918-5524-9

Laguna, J. D.; Bartelt, M.; Keller, C.; Seume, J.R. (2013): Sensitivity and Uncertainty of the Radial Mode Analysis for Turbomachinery Applications,  Proceedings of the ETC 10, 15-19 April 2013, Lappeenranta, Finland, ETC2013-109

Bartelt, M.; Meinzer, C.E.; Laguna, J.D.; Seume, J.R. (2012): Design Methodology and Experimental Validation of an Aeroacoustic Test Rig for Turbomachinery Applications,  Proceedings of 13th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, Tokyo, 2012, ISUAAAT-S12-4

Freund, O.; Bartelt, M.; Mittelbach, M.; Montgomery, M.; Vogt, D.; Seume, J.R. (2012): Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies,  Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-69966
DOI: 10.1115/GT2012-69966
ISBN: 978-0-7918-4473-1

Kirez, O., Yazicioglu, A., & Kakac, S. (2012): Numerical Analysis of Convective Heat Transfer of Nano-fluids for Laminar Flow in a Circular Tube,  ASME International Mechanical Engineering Congress and Exposition (Vol. 45233, pp. 471-478)
DOI: 10.1115/IMECE2012-86916

Henke, M.; Biester, M. H.-O.; Gündogdu, Y.; Lippl, F.; Mass, E.; Seume, J.R. (2012): Numerical Assisted Design of a Variable Rotating Vane Carrier Device for Turbine Test Rigs with Split Housing Structures using a Segmented Half-Ring Bearing Concept,  53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April 2012, Honolulu, Hawaii, AIAA 2012-1660

Biester, M. H.-O.; Henke, M.; Gündogdu, Y.; Engel, K.; Seume, J.R. (2012): Unsteady Wake-Blade Interaction: A Correlation between Surface Pressure Fluctuations and Loss Generation,  Proceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69616
DOI: 10.1115/GT2012-69616
ISBN: 978-0-7918-4474-8

Chahine, C; Seume, J.R.; Verstraete, T. (2012): The Influence of Metamodeling Techniques on the Multidisciplinary Design Optimization of a Radial Compressor Impeller,  Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-68358
DOI: 10.1115/GT2012-68358
ISBN: 978-0-7918-4474-8

Lietmeyer, C.; Seume, J.R.; Scheuer, R.; Vynnyk, T.; Reithmeier, E., Krawczyk, T.; Denkena, B.; Wojakowski, B.; Kling, R.; Overmeyer, L. (2012): Recent Advances in Manufacturing of Riblets on Compressor Blades and their Aerodynamic Impact,  Proceedings of the ASME Turbo Expo, 11-15 June 2012, Kopenhagen, Denmark, GT2012-69067
DOI: 10.1115/GT2012-69067
ISBN: 978-0-7918-4474-8

Freund, O.; Schaefer, P.; Rehder, H.-J.; Roehle, I. (2011): Experimental Investigations on Cooling Air Ejection at a Straight Turbine Cascade using PIV and QLS,  Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45296
DOI: 10.1115/GT2011-45296
ISBN: 978-0-7918-5465-5

Biester, M. H.-O.; Müller, L.; Gündogdu, Y.; Seume, J.R. (2011): Time-Resolved Numerical Investigation of the Interaction of Labyrinth Seal Leakage and Main-Flow in a 1.5-Stage LP Turbine,  Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45883
DOI: 10.1115/GT2011-45883
ISBN: 978-0-7918-5467-9

Sadovnichiy, V.; Kuschel, M.; Opilat, V.; Seume, J.R. (2011): Effect of Swirl and Tip Leakage on Flow Structure, Losses and Pressure Recovery in Axial Exhaust Diffuser,  Proceedings of the 9th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey

Opilat, V.; Seume, J.R. (2011): Application of Endoscopic PIV to the Interaction between Turbine and Exhaust Diffuser,  Proceedings of the 9th European Turbomachinery Conference, 21-25 March 2011, Istanbul, Turkey

Natkaniec, C.K.; Kammeyer, J.; Seume, J.R. (2011): Secondary Flow Structures and Losses in a Radial Turbine Nozzle,  Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46753
DOI: 10.1115/GT2011-46753
ISBN: 978-0-7918-5463-1

Herbst, F.; Kozulovic, D.; Seume, J.R. (2011): Transition Modelling for Vortex Generating Jets on Low-Pressure Turbine Profiles,  Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45621
DOI: 10.1115/GT2011-45621
ISBN: 978-0-7918-5467-9

Opilat, V.; Seume, J.R. (2011): The Effect of the Operating Conditions of the Last Turbine Stage on the Performance of an Axial Exhaust Diffuser,  Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45668
DOI: 10.1115/GT2011-45668
ISBN: 978-0-7918-5467-9

Herbst, F.; Bluemel, S.; Fakiolas, E.; Seume, J.R. (2011): Numerical Investigation of the Interaction between Probe, Flow and Blading in an Axial-Turbine,  Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0194

Lietmeyer, C.; Oehlert, K.; Seume, J.R. (2011): Optimal Application of Riblets on Compressor Blades and their Contamination Behavior,  Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46855
DOI: 10.1115/GT2011-46855
ISBN: 978-0-7918-5467-9

Ernst, B.; Kammeyer, J.; Seume, J.R (2011): Improved Map Scaling Methods for Small Turbocharger Compressors,  Proceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-45345
DOI: 10.1115/GT2011-45345
ISBN: 978-0-7918-5463-1

Raetz, H.; Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2011): Numerical Investigation of Aerodynamic Radial and Axial Impeller Forces in a Turbocharger,  Proceedings of the ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, Canada, GT2011-46360
DOI: 10.1115/GT2011-46360
ISBN: 978-0-7918-5463-1

Herbst, F.; Peters, M.; Seume, J.R. (2011): To the Limits of the Application of the BOS Method,  Proceedings of the 11th International Conference on Fluid Control, Measurements, and Visualization FLUCOME 2011, 5-9 December 2011, Keelung, Taiwan

Bartelt, M.; Kwitschinski, T.; Ceyrowsky, T.; Grates, D.; Seume, J.R. (2011): Experimental and Numerical Investigation of Different Rectangular Volute Geometries for Large Radial Compressors,  Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-46296
DOI: 10.1115/GT2011-46296
ISBN: 978-0-7918-5467-9

Adamczuk, R.R.; Seume, J.R. (2011): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions,  Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0175

Lietmeyer, C.; Chahine, C.; Seume, J.R. (2011): Numerical Calculation of the Riblet-Effect on Compressor Blades and Validation with Experimental Results,  Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0106

Kuschel, M.; Seume, J.R. (2011): Influence of Unsteady Turbine Flow on the Performance of an Exhaust Diffuser,  Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada, GT2011-45673
DOI: 10.1115/GT2011-45673
ISBN: 978-0-7918-5467-9

Apacoglu, B., Kirez, O., Kakac, S., & Yazicioglu, A. G. (2011): Enhancement of convective heat transfer in laminar and turbulent flows with nano-fluids,  8th Minsk International Seminar "Heat Pipes, Heat Pumps, Refrigerators (p. 5-17), Power Sources.

Vorreiter, A.: Fischer, S.; Saathoff, H.; Radespiel, R.; Seume, J.R. (2010): Numerical Investigations of the Efficiency of Circulation Control in a Compressor Stator,  Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22721
DOI: 10.1115/GT2010-22721
ISBN: 978-0-7918-4402-1

Herbst, F.; Biester, M. H.-O; Fiala, A.; Engel, K.; Seume, J.R. (2010): Validation of RANS-Modelling Approaches for Active Flow Control by Vortex Generating Jets in a Low-Pressure Turbine Cascade,  Proceedings of the 8th International Symposium on Engineering Turbulence Modelling and Measurements – ETMM8, 9-11 June 2010, Marseille, France

Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2010): Tip Leakage in Small Radial Turbines – Optimum Tip-Gap and Efficiency Loss Correlations,  Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-22680
DOI: 10.1115/GT2010-22680
ISBN: 978-0-7918-4400-7

Alhaj, O.; Seume, J.R. (2010): Optical Investigation of Profile Loss in a Linear Turbine Cascade,  Proceedings of the ASME Turbo Expo, 14-18 June 2010, Glasgow, UK, GT2010-23166
DOI: 10.1115/GT2010-23166
ISBN: 978-0-7918-4402-1

Glodic, N.; Bartelt, M.; Vogt, D.; Fransson, T. (2009): Aeroelastic Properties of Combined Mode Shape in an Oscillating LPT Cascade,  Proceedings of the 12th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, 1-4 September 2009 London, UK

Gómez, A.; Seume, J.R. (2009): Aerodynamic Coupling of Rotor and Tower in HAWTs,  Proceedings of European Wind Energy Conference (EWEC), 16-19 March 2009, Marseille, France

Goltz, I.; Böhmer, H.; Nollau, R.; Belz, J.; Grueber, B.; Seume, J.R. (2009): Piezo-Electric Actuation of Rotor Blades in an Axial Compressor,  Proceedings of 8th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria

Sadovnichiy, V.N.; Binner, M.; Seume, J.R. (2009): The Influence of Axial Gaps and Leaned-Twisted Guide Vanes on the Shroud Leackage and Turbine Stage Efficiency,  Proceedings of 8th European Conference on Turbomachinery (ETC), 23-27 March 2009, Graz, Austria

Gomez, A.; Seume, J.R. (2009): Modelling of Pulsating Loads on Wind Turbine Blades,  Proceedings of the 3rd International Conference on Energy Sustainability, 19-23 July 2009, San Francisco, California, USA, ES2009-90121
DOI: 10.1115/ES2009-90121
ISBN: 978-0-7918-4890-6

Siemann, J.; Nollau, R.; Grüber, B.; Seume, J.R. (2009): Controlled Excitation of Rotor Blades via Macro Fiber Composites in an Axial Compressor,  Proceedings of the 19th International Symposium on Air Breathing Engines, 7-11 September 2009, Montreal, Canada, ISABE-2009-1263

Früh, W.G.; Seume, J.R.; Gomez, A. (2008): Modelling the Aerodynamic Response of a Wind Turbine Blade Passing in Front of the Tower,  Proceedings of European Wind Energy Conference (EWEC), 31 March - 3 April 2008, Brussels, Belgium, 163_EWEC2008

Sieker, O.; Seume, J.R. (2008): Effects of Rotating Blade Wakes on Separation and Pressure Recovery in Turbine Exhaust Diffusers,  Proceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-50788
DOI: 10.1115/GT2008-50788
ISBN: 978-0-7918-4316-1

Guendogdu, Y.; Vorreiter, A.; Seume, J.R. (2008): Design of a Low Solidity Flow-Controlled Stator with Coanda Surface in a High Speed Compressor,  Proceedings of the ASME Turbo Expo, 9-13 June 2008, Berlin, Germany, GT2008-51180
DOI: 10.1115/GT2008-51180
ISBN: 978-0-7918-4316-1

Ziaei Rad, M.; Nouri-Broujerdi, A.; Seume, J.R. (2008): Numerical Computation of a Compressible Laminar Flow with Heat Transfer in the Entrance Region of a Pipe,  Proceedings of ASME Summer Heat Transfer Conference, 10-14 August 2008, Jacksonville, Florida, USA, HT2008-56199
DOI: 10.1115/HT2008-56199
ISBN: 978-0-7918-4849-4

Sieker, O.; Seume, J.R. (2007): Influence of Artificial Generated Rotating Wakes on Separating Behaviour of Annular Diffusers,  Proceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July, 2007, Lyon, France ISAIF8-0054

Sadovnichiy, V.N.; Alhaj, O.; Binner, M.; Seume, J.R. (2007): CFD Models for Blade Tip and Diaphragm Gland Leakage Flow in Turbines of Disc-and Diaphragm Design,  Proceedings of 7th European Conference on Turbomachinery (ETC), Fluid Dynamics and Thermodynamics, 5-9 March 2007, Athens, Greece

Shaaban, S.; Seume, J.R. (2007): Aerodynamic Performance of Small Turbocharger Compressors,  Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27558
DOI: 10.1115/GT2007-27558
ISBN: 0-7918-4792-6

Herzog, N.; Binner, M.; Seume, J.R.; Rothe, K. (2007): Verification of Low-Flow Conditions in a Multistage Turbine,  Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27328
DOI: 10.1115/GT2007-27328
ISBN: 0-7918-4795-0

Barchewitz, L.P.; Seume, J.R. (2007): Dynamic Modelling and Controls of an Air Supply System for In-Flight PEM,  Proceedings of the ASME Turbo Expo, 14-17 May 2007, Montreal, Québec, Canada, GT2007-27900
DOI: 10.1115/GT2007-27900
ISBN: 0-7918-4792-6

Sieker, O.; Seume, J.R. (2007): Influence of Rotating Wakes on Separation in Turbine Exhaust Diffusers,  Proceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 2-5 July 2007, Lyon, France, ISAIF8-0054

Oehlert, K.; Seume, J.R.; Wang, B.; Denkena, B.; Hage, W.; Knobloch, K.; Meyer, R.; Siegel, F.; Ostendorf, A.; Vynnyk, T.; Reithmeier, E. (2007): Exploratory Experiments on Machined Riblets for 2-D Compressor Blades,  Proceedings of ASME International Mechanical Engineering Congress & Exposition (IMECE), 11-15 November 2007, Seattle, Washington, USA, IMECE2007-43457
DOI: 10.1115/IMECE2007-43457
ISBN: 0-7918-4295-9

Imetovski. E.; Seume, J.R. (2007): Multi-Stage Effects of Bow and Sweep in a High-speed Axial Compressor,  Proceedings of the International Gas Turbine Congress (IGTC), 2-7 Dec. 2007, Tokyo, Japan, IGTC2007-TS-049

Hellmich, B.; Seume, J.R. (2006): Causes of Acoustic Resonance in a High-Speed Axial Compressor,  Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90947, (auch veröffentlicht in Journal of Turbomachinery, May 2008)
DOI: 10.1115/GT2006-90947
ISBN: 0-7918-4241-X

Goldhahn, E.; Seume, J.R. (2006): The Background Oriented Schlieren Technique: Sensitivity, Accuracy, Resolution and Application to a Three-Dimensional Density Field,  Proceedings of 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 26-29 June 2006, Lisbon, Portugal (auch veröffentlicht in Experiment in Fluids, July 2007)

Oehlert, K.; Seume, J.R. (2006): Exploratory Experiments on Machined Riblets on Compressor Blades,  Proceedings of ASME 2nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093
DOI: 10.1115/FEDSM2006-98093
ISBN: 0-7918-4750-0

Oehlert, K.; Seume, J.R. (2006): Exploratory Experiments on Machined Riblets on Flat Plates,  Proceedings of ASME 2nd Joint U.S. – European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, Florida, USA, FEDSM 2006-98093

Fischer, K.; Seume, J.R. (2006): Location and Magnitude of Heat Sources in Solid Oxide Fuel Cells,  Proceedings of 4th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97167 (auch veröffentlicht in Journal of Fuel Cell Science and Technology, February 2009)
DOI: 10.1115/FUELCELL2006-97167
ISBN: 0-7918-4247-9

Beil, A.; Seume, J.R. (2006): Unsteady Performance of a PEMFC System Including Autothermal Methane Reforming,  Proceedings of 4th International Conference of Fuel Cell Science, Engineering and Technology, 19-21 June 2006, Irvine, California, USA, FUELCELL2006-97008
DOI: 10.1115/FUELCELL2006-97008
ISBN: 0-7918-4247-9

Braun, M.; Seume, J.R. (2006): Forward Sweep in a Four-Stage High-Speed Axial Compressor,  Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90218
DOI: 10.1115/GT2006-90218
ISBN: 0-7918-4241-X

Barchewitz, L.P.; Seume, J.R. (2006): Conceptual Analysis of Air Supply Systems for In-Flight PEM-FC,  Proceedings of the ASME Turbo Expo, 8-11 May 2006, Barcelona, Spain, GT2006-90688
DOI: 10.1115/GT2006-90688
ISBN: 0-7918-4239-8

Schreyer, B.; Seume, J.R. (2005): The Loss Behaviour of Milled Turbine Blades,  Proceedings of 6th Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC 6), 7-11 March 2005, Lille, France, Vol. 1, p. 210, AFT-020_03 / 124

Herzog, N.; Gündogdu, Y.; Kang, G.; Seume, J.R. (2005): Part Load Operation of a Four-Stage Turbine,  Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68700
DOI: 10.1115/GT2005-68700
ISBN: 0-7918-4730-6

Steglich, T.; Kitzinger, J.; Van den Braembussche, R.A.; Prinsier, J.; Seume, J.R. (2005): Improved Diffuser / Internal Volute Combinations for Centrifugal Compressors,  Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68894
DOI: 10.1115/GT2005-68894
ISBN: 0-7918-4730-6

Griebel, A.; Seume, J.R. (2005): The Influence of Variable Rotor-Stator Interaction on Boundary-Layer Development in an Axial Compressor,  Proceedings of the ASME Turbo Expo, 6-9 June 2005, Reno-Tahoe, Nevada, USA, GT2005-68902
DOI: 10.1115/GT2005-68902
ISBN: 0-7918-4730-6

Hellmich, B.; Seume, J.R. (2004): Acoustic Resonance in a Four-Stage High-Speed Axial Compressor,  Proceedings of the 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 7-11 March 2004, Honolulu, Hawaii, ISROMAC10-2004-004

Fischer, A.; Riess, W.; Seume, J.R. (2003): Performance of Strongly Bowed Stators in a 4-Stage High Speed Compressor,  Proceedings of the ASME Turbo Expo, 16-19 June 2003, Atlanta, Georgia, USA, GT-2003-38392
DOI: 10.1115/GT2003-38392
ISBN: 0-7918-3689-4

Hellmich, B.; Braun, M.; Fischer, A.; Seume, J.R. (2003): Observations on the Causal Relationship between Blade count and Developing Rotating Stall in a Four Stage Axial Compressor,  Proceedings of 5th European Conference on Turbomachinery (ETC), 17-22 March 2003, Prague, Czech Republic

Fischer, A.; Seume, J.R. (2003): Comparison of Multistage CFD Calculations and Measurements in a High Speed Compressor,  Conference on Modelling Fluid Flow (CMFF'03), The 12th International Conference on Fluid Flow Technologies, 3-6 September 2003, Budapest, Hungary

Levy, Y.; Pismenny, J.; Reissner, A.; Riess, W. (2002): Experimental Study of Rotating Stalls in a Four-Stage Axial Compressor,  Proceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30362
DOI: 10.1115/GT2002-30362
ISBN: 0-7918-3610-X

Harbecke, U.G.; Riess, W.; Seume, J.R. (2002): The Effect of Milling Process Induced Coarse Surface Texture on Aerodynamic Turbine Profile Losses,  Proceedings of the ASME Turbo Expo, 3-6 June 2002, Amsterdam, the Netherlands, GT-2002-30333
DOI: 10.1115/GT2002-30333
ISBN: 0-7918-3610-X

Fleige, H.-U.; Riess, W.; Seume, J.R. (2002): Swirl and Tip Leakage Flow Interaction with Struts in Axial Diffusers,  Proceedings of the ASME Turbo Expo 2002, 3-6 June, Amsterdam, The Netherlands, GT-2002-30491
DOI: 10.1115/GT2002-30491
ISBN: 0-7918-3610-X

Runkel, J.; Hellmich, B. (2002): Operating Experience with an On-Line Vibration Control System for PRW Main Coolant Pumps,  Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. I, pp. 243-250

Hellmich, B.; Fischer, A.; Reissner, A.; Runkel, J.; Seume, J.R. (2002): Estimation of the Rotating Frequency from Rotor Frequency and Common Blade Number Integer Fractions in a Four Stage Axial Compressor,  Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 737-744

Hasemann, H.; Rautenberg, M.; Hagelstein, D.; Sonthipermpoon, K. (2002): The Vibration Behavior of Centrifugal Impeller Blades in the Five-Axis CNC Flank Milling Process,  Proceedings of 6th International Conference on Rotor Dynamics, 30 September - 4 October 2002, Sydney, Australia, Vol. II, pp. 730-736

Fleige, H.-U.; Riess, W. (2001): Investigations of Gas Turbine Exhaust Diffuser Flows,  Proceedings of 4th European Conference on Turbomachinery (ETC), 20-23 March 2001, Firenze, Italy

Harbecke, U.; Riess, W. (2001): Experimental and Numerical Investigation of a Technically Rough Turbine Blade Cascade,  Proceedings of 4th European Conference on Turbomachinery (ETC), 20-23 March 2001, Firenze, Italy

Chen, J.; Hasemann, H.; Cheng, X.; Rautenberg M. (2001): Stall Inception Behaivior in a Centrifugal Compressor Re-examined using Wavelet Method,  Proceedings of 5th International Symposium on Experimental and Computational Aerothermo­dynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland

Chen, Y.N.; Hagelstein, D.; Haupt, U.; Rautenberg, M. (2001): Behavior of Deep Surge of Centrifugal Compressors,  Proceedings of 5th International Symposium on Experimental and Computational Aerothermo­dynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland

Notkina, I.M.; Strizhak, L.J.; Suslina, L.P.; Beyer, B.; Bahm, F.; Rautenberg, M. (2001): Investigation of Three-Dimensional Compressible Turbulent Flow in a Vaneless Diffuser of a Radial Turbomachine Stage,  Proceedings of 5th International Symposium on Experimental and Computational Aerothermo­dynamics of Internal Flows (ISAIF), 4-7 September 2001, Gdansk, Poland

Hellmich, B.; Fiedler, J.; Runkel, J.; Stegemann, D. (2000): The Influence of Different SPN-Detector Emitter Materials to the Results of Neutron Noise Analysis,  Proceeding of Physor, 7-12 May 2000, Pittsburgh, Pennsylvania, USA

Runkel, J.; Stegemann, D.; Fiedler, J.; Heidemann, P. (2000): Vibration Monitoring by Neutron Noise Analysis and Acceleration Measurements inside Operating Nuclear Power Reactors,  Proceeding of Physor, 7-12 May 2000, Pittsburgh, Pennsylvania, USA

Chen, Y.N.; Hagelstein, D.; Kassens, I.; Haupt, U.; Rautenberg, M. (2000): Effect of the Decaying Overshoot of the Rankine Vortex on the Axial Flow Field Behind the Inlet Guide Vane of Centrifugal Compressors,  Proceedings of the ASME Turbo Expo 2000: Power for Land, Sea, and Air. Volume 1: Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. Munich, Germany. May 8–11, 2000. V001T03A003. ASME-Paper: 2000-GT-0427

Runkel J.; Fiedler, J.; Stegemann, D. (2000): Results of Noise Diagnostics in Different Reactor Types within International Scientific and Technological Cooperation Programs,  Proceedings of NPIC & HMIT, 13-17 November 2000, Washington D.C., USA

Runkel, J.; Heidemann, P.; Stegemann, D. (2000): Localization of Impacting Instrument Tubes Inside Operating Boiling Water Reactors by Use of Incore Accelerometers,  Proceedings of NPIC & HMIT, 13-17 November 2000, Washington D.C., USA

Gehring, S.; Riess, W. (2000): Analysis of the Mixing Process in a 1.5 Stage Turbine with Coolant Ejection,  Proceedings of the ASME Turbo Expo, 8-12 May 2000, Munich, Germany, 2000-GT-669

Runkel, J.; Stegemann, J.; Fiedler, P.; Heidemann, R.; Blaser, R.; Schmid, F.; Trobitz, M.; Hirsch, L.; Thoma, K. (1999): New Technologies for Acceleration and Vibration Measurements Inside Operating Nuclear Power Reactors,  Proceedings of the Workshop on Core Monitoring for Comercial Reactors: Improvements in Systems and Methods, 4-5 October 1999, Stockholm, Sweden, pp. 103-115

Gehring, S.; Riess, W. (1999): Throughflow Analysis for Cooled Turbines,  Proceedings of 3rd European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics (ETC), 2-5 March 1999, London, UK, IMechE 1999 C557/022, pp 79-88

Beyer, B.; Hasemann, H.; Rautenberg, M. (1998): The Use of Axial Flow Turbines for Driving Centrifugal Compressors,  Proceedings of 6th International Conference on Turbocharging and Air Management Systems, 3-5 November 1998, London, UK, IMechE 1998 C554/021, pp 183-192

Petrovic, M.; Riess, W. (1997): Off-Design Flow Analysis and Performance Prediction of Axial Turbines,  Proceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357
DOI: 10.1115/97-GT-055
ISBN: 978-0-7918-7868-2

Johnson, T.; Becker, B.; Seume, J.R.; Termuehlen, H. (1997): First V84.3A Gas Turbine Installation at Hawthorn Station,  Proceedings of International Gas Turbine and Aeroengine Congress and Exibition, 2-5 June 1997, Orlando, Florida, USA, ASME-Paper 97-GT-357
DOI: 10.1115/97-GT-357
ISBN: 978-0-7918-7870-5

Hermann, J.; Hantschk, C.C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A.; Seume, J.R.; Vortmeyer, N.; Krause, W. (1997): Aktive Instabilitätskontrolle an einer 170 MW Gasturbine ,  18. Deutsch-Niederländischer Flammentag, 28-29 August 1997, Delft, Netherlands, VDI-Berichte 1313, pp. 337-344

Seume, J.R.; Vortmeyer, N.; Krause, W.; Hermann, J.; Hantschk, C.-C.; Zangl, P.; Gleis, S.; Vortmeyer, D.; Orthmann, A. (1997): Application of Active Combustion Instability Control to a Heavy Duty Gas Turbine,  Proceedings of ASME Asia Congress and Exposition, 30 September – 02 October 1997, Singapore (auch veröffentlicht in Journal of Engineering for Gas Turbines and Power, October 1998)

Böhm, W.; Raake, D.; Regnery, D.; Seume, J.R.; Terjung, K. (1996): Testing the Model V84.3A Gas Turbine – Experimental Techniques and Results,  Proceedings of International Gas Turbine and Aeroengine Congress and Exposition, 5-7 November 1996, Jakarta, Indonesia, ASME -Paper 96-TA-14

Janssen, M.; Mönig, R.; Seume, J.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E. (1994): The Model V 84.3 Shop Tests: Compressor Flow Field Measurements and Evaluation,  Proceedings of International Gas Turbine and Aeroengine Congress and Exposition, 13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-462

Janssen, M.; Seume, J.R.; Zimmermann, H. (1994): The Model V 84.3 Shop Tests: Tip Clearance Measurements and Evaluation,  Proceedings of International Gas Turbine and Aeroengine Congress and Exposition,13-16 June 1994, Den Haag, Netherlands, ASME-Paper 94-GT-319

Seume, J.R.; Simon, T.W. (1987): Flow Oscillation Effects in Tubes and Porous Material: Unresolved Issues,  Beitrag in: Morel, T.E., Dudenhoefer, J.E., Uzkan, T., Singh, P.J. (Hrsg.): Fluid Flow and Heat Transfer in Reciprocating Machinery. ASME Winter Annual Meeting, 1987, Boston, Massachusetts, USA, pp. 55-62 New York: American Society of Mechanical Engineers 1988

Rautenberg, M.; Malobabic, M. (1985): On Turbochargers with Variable Geometry,  Gas Turbine Conference and Exhibit, 18-21 March 1985, Houston, Texas, ASME Paper 85-T-149

Maroldt, N.; Kauth, F.; Seume, J.R. (2020): Experimental Validation of an Optimized Design Process for Transonic Mixed-Flow Compressors,  Contributions to the Final Symposium of the Collaborative Research Center 880, December 17-18, 2019, Braunschweig, Germany
DOI: 10.1007/978-3-030-52429-6
ISBN: 978-3-030-52428-9

Lechner, C.; Seume, J.R. (Hrsg.) (2019): Stationäre Gasturbinen,  3. neu bearbeitete Auflage, Springer-Verlag: Berlin, Heidelberg
DOI: 10.1007/978-3-662-56134-8
ISBN: 978-3-662-56134-8

Seume, J.R.; Gier, J. (2018): R8 Gasturbinen,  In: Dubbel-Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 25. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
ISBN: 978-3-662-54805-9

Seume, J.R. (2014): Entscheidungsspielräume im Alltag des Maschinenbau-Ingenieurs,  In: Verantwortung von Ingenieurinnen und Ingenieuren. (Hieber, L.; Kammeyer, H-U. (Hrsg.)), S.113-120, Springer-Verlag Berlin Heidelberg
DOI: 10.1007/978-3-658-05530-1
ISBN: 978-3-658-05529-5

Seume, J.; Mailach, R. (2014): R1 Grundlagen der Strömungsmaschinen,  In: Dubbel-Taschenbuch für den Maschinenbau (Grote, K.-H.; Feldhusen, J. (Hrsg.)); 24. aktualisierte und erweiterte Auflage; Springer Verlag Berlin Heidelberg
DOI: 10.1007/978-3-642-38891-0_102
ISBN: 978-3-642-38890-3

Seume, J.R.; Gier, J. (2014): R8 Gasturbinen,  In: Dubbel-Taschenbuch für den Maschinenbau (Grote, K.-H., Feldhusen, J. (Hrsg.)), Springer Verlag. Berlin, Heidelberg.
ISBN: 978-3-642-38890-3

Lechner, C.; Seume, J.R. (Hrsg.) (2010): Stationäre Gasturbinen,  2. neu bearbeitete Auflage, Springer-Verlag
ISBN: 3540927877

Goldhahn, E.; Alhaj, O.; Herbst, F.; Seume, J. (2009): Quantitative Measurements of Three-Dimensional Density Fields Using the Background Oriented Schlieren Technique.,  In: Imaging Measurement Methods for Flow Analysis. (Nitsche, W.; Dobriloff, C.), pp.135-144. Springer-Verlag
DOI: 10.1007/978-3-642-01106-1_14
ISBN: 978-3-642-01106-1

Lechner, C.; Seume, J.R. (Hrsg.) (2003): Stationäre Gasturbinen,  Springer-Verlag: Berlin, Heidelberg
DOI: 10.1007/978-3-662-10016-5
ISBN: 978-3-540-92788-4

Hellmich, B. (2000): Der Zweck der Zirkularität. Der 2.Hauptsatz der Thermodynamik im Reich der Naturnotwendigkeit, Mit und gegen Hegel. Von der Gegenstandslosigkeit der absoluten Reflexion zur Begriffslosigkeit der Gegenwart.,  Lüneburg 2000, zu Klampen-Verlag, ISBN: 3-924245-91-6
ISBN: 3-924245-91-6

Voigt, J.; Wein, L.; Werner-Spatz, C.; Städing, J.; Ziaja, K., di Mare, Francesca; Friedrichs, J.; Seume, J.R. (2023): MRO of Current and Future Engine Technologies – Climate Impact, Economic Potential, and Scientific Challenges,  Deutscher Luft- und Raumfahrtkongress 2023

Willers, O., Seume, J.R., Zeh, C., Schwarze, H. (2021): Thermal Influence on the Overall TC System with Consideration of the Coupled Bearings,  Thermal Influence on the Overall TC System with Consideration of the Coupled Bearings. MTZ Worldw 82, S. 56–60
DOI: https://doi.org/10.1007/s38313-020-0609-8

Flinte, J.; Eilts, P.; Willers, O.; Seume, J.R. (2020): Extension of the Characteristic Map of a TC Compressor by Active Cross-Section Variation,  MTZ Worldw. 81, 68-72
DOI: 10.1007/s38313-019-0166-1

Henke, M.; Rätz, H.; Fleige, H.-U.; Seume, J.R. (2019): Preparation of Acceptance Tests for a New Turbomachinery Test Facility,  9th EVI-GTI International Gas Turbine Instrumentation Conference, 20th and 21th Nov 2019, Graz, Austria

Menze, M.; Schödel, M.; Willers, O.; Seume, J. R.; (2019): Brennstoffzellensysteme im Straßenverkehr als Antriebskonzept für die Mobilität der Zukunft,  Journal für Mobilität und Verkehr, Ausgabe 3
DOI: 10.34647/jmv.nr3.id24
ISBN: 2628-4154

Willers, O.W.; Kunte, H.; Seume, J.R. (2017): ORC Turbine-Generator Unit for Truck Applications,  Automobiltechnische Zeitschrift (ATZ) Worldwide, Vol. 119, October 2017, pages 58-61, Springer, Wiesbaden
DOI: 10.1007/s38311-017-0095-z

Hohenstein, S.; Aschenbruck, J.; Seume, J.R (2013): Einfluss betriebs- und regenerationsbedingter Varianzen von Turbinenschaufeln,  International Journal for Electricity and Heat Generation VGB PowerTech (11), S. 51-58, 2013

Kuschel, M.; Seume, J.R. (2010): Influence of the wakes of Rotating Spokes on the Performance of a Turbine Exhaust Diffuser,  Journal of Thermal Science, Vol. 19, Issue 3, pp. 206-210

Lietmeyer, C.; Gündogdu, Y.; Kleppa, O.; Oehlert, K.; Vorreiter, A.; Seume, J. (2009): Zukunftsperspektiven für die Hochtemperaturgasturbine,  VGB PowerTech, Band 89, Heft 10/2009, S. 48-55 auch veröffentlicht auf der VGB Fachtagung Gasturbinen und Gasturbinenbetrieb, 24-25 Juni 2009, Mannheim

Sieker, O.; Seume, J.R. (2008): Influence of Rotating Wakes on Separation in Turbine Exhaust Diffusers,  Journal of Thermal Science, Vol. 17, Issue 1, pp. 42-49
DOI: 10.1007/s11630-008-0042-9

Pietrasch, R.Z.; Seume, J.R. (2005): Interaction between Struts and Swirl Flow in Gas Turbine Exhaust Diffusers,  J. of Thermal Science Vol. 14, No.4, pp. 314-320

Petrovic, M.; Gehring, S; Rieß, W. (2001): 2D-Verfahren zur Auslegung, Optimierung und Kennfeldberechnung von Gas- und Dampfturbinen,  VGB PowerTech, Band 81, Heft 1 1/2001, S. 52-57

Henke, M.; Raetz, H.; Seume, J.R.; Junge, L.; Fleige, H.; Gärling S. (2023): Aerodynamic Design and Experimental Validation of an In-Flow Settling Chamber for Turbomachinery Test Rigs,  10th International EVI-GTI Conference in Budapest, 25. – 27. April 2023

Stania, L.; Ludeneit, F.; Seume, J.R. (2022): Experimental Investigation of the Sensitivity of Forced Response to Cold Streaks in an Axial Turbine,  International symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines (ISUAAAT16), Toledo, Spanien

Amer, M.; Wallaschek, J.; Seume, J.R.; Ventura, C.E. (2022): Comparison of Different OMA Techniques and their Application to an Axial Compressor Test Rig,  IOMAC 2022, July 3-6, 2022, Vancouver, Canada

Amer, M.; Groß, C.; Seume, J.R. (2021): Application of Virtual Sensing to Vibrational Data from a High-Speed Axial Compressor,  XXV ICTAM, 22-27 August 2021, Milano, Italy

Yalçın, Ö; Cengiz, K.; Wein, L.; Özyörük, Y.; Seume, J.R. (2021): Transitional DDES Study over a Circular Cylinder and an Airfoil,  13th International ERCOFTAC Symposium, Rhodes

Barta, R.B.; Bahman, A.M.; Stania, L.; Ziviani, D.; Groll, E.A. (2021): Experimental and Mechanistic Numerical Analysis of a Variable Speed Residential Heat Pump Unit with an Expansion Work-Recovery Device,  Proc. of the 13th IEA Heat Pump Conference, Paper 82, Jeju, Korea, April 26 – 29, 2021

Mimic, D.; Jätz, C.; Oettinger, M.; Herbst, F.; Seehausen, H.; Kurth, S.; Frieling, D.; Zieße, M.; Seume, J. R. (2019): Improving Aerothermal and Aeromechanical Turbomachinery Design by Combining High-Fidelity Methods with Multi-Stage Approaches,  Proceedings of the International Gas Turbine Congress (IGTC) 2019, 17-22 November, 2019, Tokyo, Japan. Paper IGTC-2019-PL3

Mimic, D.; Jätz, C.; Sauer, P.; Herbst, F. (2019): Total Pressure Loss Reduction in Annular Diffusers,  International Journal of Gas Turbine, Propulsion and Power Systems (JGPP), April 2019, Volume 10, Number 2
DOI: https://doi.org/10.38036/jgpp.10.2_1

Hain, R.; Fuchs, T.; Wein, L.; Kluge, T.; Seume, J.; Kähler, C. J. (2019): Stereoscopic PTV Measurements in the Housing/Rotor Cavity of a Shrouded Turbine Rotor,  Proceedings of the 13th International Symposium on Particle Image Velocimetry 2019

Schwerdt, L.; Willeke, T.; Huxdorf, O.; Krone, J.-H.; Friedrichs, J.; Riemenschneider, J.; Monner, H.P.; Seume, J.R. (2019): Active Flow Control in an Axial Compressor by Zero-Net-Mass-Flux Actuation,  Proceedings of the 14th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows 8-11 July 2019, Gdansk, Poland, ISAIF14-084

Oettinger, M.; Prohaska, P.; Schwerdt, L.; Panning-von Scheidt, L.; Herbst, F.; Seume, J.R. (2019): Potenzialstudie eines Verbunds aus Entkoppelt Betriebenen Aeroderivaten,  Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019 (Kraftwerkstechnisches Kolloquium, Dresden)
ISBN: 3934409938

Henke, M.; Herbst, F.; Rätz, H.; Seume, J.R. (2018): A New Facility for Dynamic Turbomachinery and Wind-Tunnel Testing,  XXIV Biannual Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines

Bode, C.; Friedrichs, J.; Kellersmann, A.; Herbst, F.; Seume, J.R. (2018): Modeling Transient Aircraft Engine Operation,  13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA

Herbst, F.; Müller-Schindewolffs, C.; Schwarzbach, F.; Zieße, M.; Bode, C. (2018): Appropriate Inlet Boundary Conditions for Scale-Resolving Simulations of Turbomachinery Configurations,  13th World Congress on Computational Mechanics (WCCM XIII), 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York, NY, USA

Shimada, T.; Takahashi, Y.; Kuboyama, T.; Moriyoshi, Y.; Fischer, T. (2018): A simple System for Turbocharger Bearing Friction Measurement using Deceleration Method,  23. Aufladetechnische Konferenz, 20.-21. September 2018, Dresden

Jätz, C.; Mimic, D.; Herbst, F.; Seume, J.R. (2018): Prediction Performance of the k-ε Elliptic-Blending Turbulence Model in Axial Diffusers,  Proceedings of Asian Congress on Gas Turbines (ACGT) 2018, 22-24 August 2018, Morioka, Japan, ACGT2018-TS48

Gößling J.; Ahlefeldt, T.; Mumcu, A.; Hilfer, M. (2018): Experimental Validation of Unsteady Pressure-Sensitive Paint for Acoustic Applications,  5th International Conference on Experimental Fluid Mechanics ICEFM, 2018, Munich

Kurth, S.; Hamann, C.; Seume, J.R.; Mulleners, K. (2018): Experimental Investigation of the Influence of Anisotropic Surface Structures on the Boundary Layer Flow,  2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0585
DOI: 10.2514/6.2018-0585

Narjes, G.; Kauth, F.; Müller, J.; Mertens, A.; Seume, J.R.; Ponick, B. (2018): High-Speed Permanent Magnet Synchronous Machine for Short-Term Operation in an Electrically Powered High-Lift System,  AIAA/IEEE Electric Aircraft Technologies Symposium, AIAA Propulsion and Energy Forum, 9-11 July 2018, Cincinnati, Ohio, USA, AIAA2018-4989
DOI: 10.2514/6.2018-4989

Gilge, P.; Seume, J.R.; Mulleners, K. (2018): Analysis of Local Roughness Combinations on the Aerodynamic Properties of a Compressor Blade,  2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0345
DOI: 10.2514/6.2018-0345

Gilge, P.; Seume, J.; Mulleners, K. (2018): Effect Of Surface Roughness On The Characteristic Length Scales In The Wake Of A Compressor Blade: A POD Analysis,  19th International Symposium on the Applications of Laser and Imaging Techniques to Fluid Mechanics, 16-19 July 2018, Lisbon, Portugal

Hartmann, U.; Von der Haar, H.; Dinkelacker, F.; Seume, J.R. (2018): Experimental Defect Detection in a Swirl-Burner Arry Through Exhaust Jet Analysis,  2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA2018-0303
DOI: 10.2514/6.2018-0303

Hauptmann, T.; Seume, J.R. (2018): Blade Vibration Measurements in a Multi-Stage Axial Turbine with Geometric Variations,  2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA, AIAA 2018-0952
DOI: 10.2514/6.2018-0952

Bittner, S.L.; Keller, C.; Meinzer, C.E.; Seume, J.R. (2018): Experimental Validation of a Forced Response Analysis Using a Time-Linearized Method,  AIAA SciTech, 8-12 January 2018, Kissimmee, Florida, AIAA 2018-0461
DOI: 10.2514/6.2018-0461

Mumcu, A; Thouault, N.; Seume, J.R. (2018): Aeroacoustic Testing for Sound Propagation through Turbine Vanes,  AIAA 2018-1003. 2018 AIAA Aerospace Sciences Meeting. January 2018
DOI: 10.2514/6.2018-1003

Koepplin, V.; Seume, J.R.; Herbst, F. (2017): Investigation of Local Flow Phenomena of Misaligned Riblets in a Turbulent Boundary Layer,  European Drag Reduction and Flow Control Meeting, 6 April 2017, Frascati, Rome, Italy. More info

Leinhos, D.C.; Engeda, S.; Heinisch, A.; Dimler, J.; Schwarz, C. (2017): Niedervolt-Boostsysteme für turboaufgeladene Otto‑Motoren,  Ladungswechsel im Verbrennungsmotor 2017, Springer Fachmedien Wiesbaden, 211-231, Wiesbaden
DOI: 10.1007/978-3-658-22671-8_12
ISBN: 978-3-658-22671-8

Kauth, F.; Narjes, G.; Müller, J.; Seume, J.R.; Vasista, S.; Müller, T.; Francois, D.G.; El Sayed M., Y.; Semaan, R.; Behr, C.; Schwerter, M.; Leester-Schädel, M.; Nolte, F.; Giesecke, D.; Atalayer, C.; Radespiel, R. (2017): Progress in Efficient Active High-Lift, 35th AIAA Applied Aerodynamics Conference,  AIAA AVIATION Forum, 5-9 June 2017, Denver, Colorado
DOI: 10.2514/6.2017-3559

Siemann, J.; Schwerdt, L.; Willeke, T.; Seume, J.R. (2017): Active Flow Control by Aspiration and Injection in Multi-Stage Axial Compressors,  Technical Keynote at Global Power & Propulsion Inaugural Forum, Zurich, Switzerland, 16-18 January 2017

Burgmann, S.; Fischer, T.; Rudersdorf, M.; Seume, J.R. (2016): Entwicklung eines Kleingebläses mit querschnittsvariablem Diffusor und Volute zur Wirkungsgradsteigerung im Teillastbetrieb,  24. Fachtagung „Lasermethoden in der Strömungsmesstechnik“, 6-8 Sept. 2016, Cottbus
ISBN: 978-3-9816764-2-6

Bode, C.; Friedrichs, J.; Müller, C.; Herbst, F. (2016): Application of Crossflow Transition Criteria to Local Correlation-Based Transition Model,  52nd AIAA/SAE/ASEE Joint Propulsion Conference, Propulsion and Energy Forum, Salt Lake City, Utah, USA, AIAA 2016-5054
DOI: 10.2514/6.2016-5054

Fischer, T.; Seume, J.R. (2016): Low Inertia Centrifugal Compressor Wheels: Aerodynamic and Mechanical Design,  IEEE Conference Publications, 2016 International Conference on Applied System Innovation (ICASI)
DOI: 10.1109/ICASI.2016.7539797

Neuhaus, L.; Gilge, P.; Seume, J.R.; Mulleners, K. (2016): Influence of Surface Roughness on the Turbulent Properties in the Wake of a Turbine Blade,  18th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 4-7 July 2016, Lisbon, Portugal

Ernst, B.; Seume, J.R.; Herbst, F. (2016): Probabilistic CFD-Analysis of Regeneration-Induced Geometry Variances in a Low-Pressure Turbine,  52nd AIAA/SAE/ASEE Joint Propulsion Conference 2016, AIAA Propulsion and Energy Forum, 25-27 July 2016, Salt Lake City, Utah, USA, AIAA 2016-4555
DOI: 10.2514/6.2016-4555

Mai, H.; Rätz, H.; Weigl, S.; Kunte, H.S.; Willers, O.; Nascimento, D.; Seume, J.R. (2016): Design and development of a component test bench for the investigation of automotive ORC systems,  16th Stuttgart International Symposium, FKFS, 15-16 March 2016, Stuttgart; proceedings pp. 1495-1514, Springer, Wiesbaden
DOI: 10.1007/978-3-658-13255-2_110

Kauth, F., Narjes, G., Müller, J., Mertens, A., Ponick, B., and Seume, J.R. (2016): Highly Integrated Electrically Driven Active High-Lift Compressor Systems for Future Civil Aircraft,  Greener Aviation Conference, 11-13 October 2016, Brussels, Belgium

Kunte, H.; Seume, J.R. (2015): Experimental Setup of a small supersonic Turbine for an Automotive ORC Application running with Ethanol,  3rd International Seminar on ORC Power Systems, City of Brussels, Belgium

Hamann, C.; Kurth, S.; Mulleners, K. (2015): Towards Quantifying Effects of Refractive Index Mismatch on PIV Results,  11th International Symposium on Particle Image Velocimetry - PIV15, 14-16 September 2015, Santa Barbara, USA

Samarbakhsh, S.; Meinzer, C.E.; Laumert, B.; Seume, J.R. (2015): On Non-Synchronous Vibrations: Lock-In Effects of an Eccentrically Rotating Cylinder,  Proceedings of the 14th International Symposium on Unsteady Aerodynamics, Aeroacoustics&Aeroelasticity of Turbomachines, ISUAAAT 14, 8-11 September 2015, Stockholm, Sweden

Hauptmann, T.; Aschenbruck, J.; Christ, P.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2015): Influence of Combustion Chamber Defects on the Forced Response Behavior of Turbine Blades,  Proceedings of the 14th International Symposium on Unsteady Aerodynamics, Aeroacoustics & Aeroelasticity of Turbomachines, ISUAAAT14, 8-11 September 2015, Stockholm, Schweden

Gilge, P.; Mulleners, K. (2015): On the Resulting Aerodynamic Loss of Combinations of Localized Surface Roughness Patches on a Turbine Blade,  33rd AIAA Applied Aerodynamics Conference, AIAA Aviation 2015, 22-26 June 2015, Dallas, USA, AIAA-2015-3161
DOI: 10.2514/6.2015-3161

Teichel, S.; Radespiel, R.; Burnazzi, M.; Dietzel, A.; Leester-Schädel, M.; Schwerter, M.; Sinapius, M.; Behr, C.; Monner, H.P.; Rudenko, A.; Horst, P.; Schmitz, A.; Ponick, B.; Dörbaum, M.; Mertens, A.; Merkert, A.; Friedrichs, J.; Atalayer, Ç.; Seume, J.R. (2015): SFB 880 - Efficient High Lift,  Proceedings of 5th International Workshop on Aircraft System Technologies, 24-25 March 2015, Hamburg, Germany, Shaker, Aachen
ISBN: 978-3-8440-3319-9

Waite, J.J.; Kielb, R.E.; Bittner, S.L. (2015): The Influence of Steady Loading Parameters on Low-Pressure Turbine Flutter,  56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, 5-9 January 2015, Kissimmee, USA, AIAA 2015-1417
DOI: 10.2514/6.2015-1417

Wolff, T.; Seume, J.R. (2015): Airfoil with Morphing Trailing Edge for Load Reduction in Wind Turbines,  33rd Wind Energy Symposium, AIAA Scitech, 5-9 January 2015, Kissimmee, FL/USA, AIAA 2015-1662
DOI: 10.2514/6.2015-1662

Hartmann, U.; Adamczuk, R.; Seume, J.R. (2015): Tomographic Background Oriented Schlieren Applications for Turbomachinery,  53rd AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 5-9 January 2015, Kissimmee, Florida, AIAA2015-1690
DOI: 10.2514/6.2015-1690

Asche, D.; Lietmeyer, C.; Schwerdt, L.; Seume, J.R. (2014): Particle Concentration and Velocity Measurements in a Cascade Wind Tunnel by Means of L2F,  XXII Biannual Symposium on Measuring Techniques in Turbomachinery, 4-5 September 2014, Lyon, France, MTT2214-A513

Brand, C.R.; Seume, J.R. (2014): Flaps for Wind Turbine Application: Noise Source Localization on a Test Airfoil,  Proceedings of the 10th PhD Seminar on Wind Energy in Europe, October 28-31, 2014, Orléans, France

Brand, C.R.; Seume, J.R. (2014): Flaps for Wind Turbine Applications: First Results of the Experimental Investigations,  Wind Turbine Sound 2014 - EWEA Technology Workshop, Malmö, Sweden

Winstroth, J.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: Assessment on a Scaled Model,  32nd ASME Wind Energy Symposium, 13-17 January 2014, National Harbor, Maryland

Winstroth, J.; Seume, J.R. (2014): Wind Turbine Rotor Blade Monitoring Using Digital Image Correlation: 3D Simulation of the Experimental Setup,  EWEA 2014, 10-13 March 2014, Barcelona, Spain

Wolff, T.; Seume, J.R. (2014): Numerical Investigation of an Airfoil with Morphing Trailing Edge for Load Reduction,  Proceedings of the 10th PhD Seminar on Wind Energy in Europe, October 28-31, 2014, Orléans, France

Adamczuk, R.; Hartmann, U.; Seume, J. (2014): Application of the Background-Oriented Schlieren Method for the Analysis of an Engine’s Exhaust Jet,  XXII Biannual Symposium on Measuring Techniques in Turbomachinery, 4-5 September 2014, Lyon, France, MTT2214-A514

Müller, C.; Herbst, F. (2014): Modelling of Crossflow-Induced Transition Based on Local Variables,  11th World Congress on Computational Mechanics, 5th European Conference on Computational Mechanics, 6th European Conference on Computational Fluid Dynamics, 20–25 July 2014, Barcelona, Spain

Laguna, J.D.; Bartelt, M.; Seume J.R. (2013): Radial Mode Analysis in an Aero-Acoustic Wind Tunnel,  AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy – Veröffentlichung und Posterbeitrag

Kunte, H.; Seume J.R. (2013): Partial Admission Impulse Turbine for Automotive ORC Application,  11th International Conference on Engines & Vehicles, Capri/Neapel, Italy
DOI: 10.4271/2013-24-0092

Sadovnichiy, V. N.; Drechsel, B.; Seume, J.R. (2013): Influence of Swirl Flow on Distribution of Loss Components in Axial Annular-Conical Diffusers,  Proceedings of 11th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 6-11 May 2013, Shenzen, China

Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Assessment of Defects and Damage in Jet Engines,  International Conference MRO Maintenance, Repair and Overhaul, 2013, Berlin

Ernst, B.; Seume, J.R. (2013): Modelling Structural Uncertainty of Wind Turbine Rotor Blades for Aeroelastic Investigations,  Seventh M.I.T. Conference on Computational Fluid and Solid Mechanics - Focus: Multiphysics & Multiscale, June 12-14, 2013, Massachusetts Institute of Technology, Cambridge, MA 02139 USA

Witthaus, S.; Bartelt, M.; Seume, J.R. (2013): Sensitivity Study of the Sound Radiation of Aircraft Engine Compressors According to Different Inlet Conditions,  AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy

Teichel, S.H.; Verstraete, T.; Seume, J.R. (2013): Optimized Preliminary Design of Compact Axial Compressors: A Comparison of Two Design Tools,  31st AIAA Applied Aerodynamics Conference, 24-27 June 2013, San Diego, USA, AIAA-2013-2651

Meinzer, C.E.; Freund, O.; Seume J.R. (2013): Design and Operation of an Acoustic System for Traveling Wave Excitation,  AIA - DAGA 2013 Conference on Acoustics, 18-21 March, 2013, Merano, Italy

Biester, M. H.-O.; Gündogdu, Y.; Seume, J.R. (2013): Clocking Effects on Surface-Pressure Fluctuations for Variable Axial-Gaps,  21st AIAA Computational Fluid Dynamics Conference, 24-27 June 2013, San Diego, USA. AIAA-2013-2955
DOI: 10.2514/6.2013-2955

Laguna, J.; Bartelt, M.; Drechsel, B.; Seume, J.R. (2012): Entwicklung einer variablen Messeinheit für Schallfeldanalysen in Turbomaschinen,  38. Jahrestagung für Akustik – DAGA 2012, Darmstadt

Ernst, B.; Gònzales, A.; Bloh, M.; Seume, J.R. (2012): Implementation of the Cuckoo Search Algorithm to Optimize the Design of Wind Turbine Rotor Blades,  Proceedings of the EWEA Annual Event, 16-19 June 2012, Copenhagen, Denmark

Seume, J.R.; kleine Sextro, T. (2012): The Potential of Variable Inlet Guide Vanes for Turbocharger Compressors,  4th International Congress on Advanced Downsizing & Turbocharging Concepts, 26-28 March 2012, Stuttgart, Germany

Lin, S.Y.; Mulleners, K.; Seume, J.R. (2012): Effect of Spinner Geometry on the Flow Near the Hub of Modern Wind Turbines,  Proceedings of 8th PhD Seminar on Wind Energy in Europe, September 12-13, 2012, ETH Zurich, Switzerland - Posterbeitrag

Winstroth, J.; Seume, J.R. (2012): New Test Bench for Optical Measurements of Rotor Blade Deformations on Wind Turbines,  Proceedings of 8th PhD Seminar on Wind Energy in Europe, September 12-13, 2012, ETH Zurich, Switzerland

Bartelt, M; Freund, O.; Seume, J.R.; Panning-von Scheidt, L.; Röhle, I.; Buske, C. (2012): Aeroakustik & Aeroelastik der Strömungsmaschinen – Eine Vorlesung als Reaktion auf aktuelle Anforderungen der Turbomaschinenentwicklung,  38. Jahrestagung für Akustik – DAGA 2012, 19.-22. März 2012, Darmstadt

Biester, M. H.-O.; Henke, M.; Seume, J.R. (2011): Numerically Optimized Design of a 1.5-Stage Turbine Test-Rig Instrumentation,  Workshop of the DGLR-Section Thermo- and Fluid-Dynamics, CFD and Experiment – Integration of Simulation, Göttingen, Germany

Kammeyer, J.; Natkaniec, C.K. (2011): Workshop: Turbocharger – Future Demands for Downsizing Applications,  3rd International Conference on Downsizing and Turbocharging Concepts, 9-11 March 2011, Wiesbaden, Germany

Seume, J.R.; Kammeyer, J.; Natkaniec, C. (2011): Turbocompressor and Turbine Design for Downsizing Applications,  3rd International Conference on Downsizing and Turbocharging Concepts, 9-11 March 2011, Wiesbaden, Germany

von Seggern, H.G.; Seume, J.R. (2011): Numerical Study of Aerosol Generation in the Deep Human Lung – Fluence of Chronic Lung Injuries,  Proceedings of international 18th Congress of the International Society for Aerosols in Medicine, 18-22 June 2011, Rotterdam, the Netherlands

Eilts, P.; Herbst, F.; Kammeyer, J.; Natkaniec, C.; Porzig, D.; Sextro, T.; Schwarze, H.; Seume, J.R.; Stöber-Schmidt, C.-P. (2011): The Potential of Variable Compressor Geometry for Highly Boosted Gasoline Engines,  SAE World Congress & Exhibition, 12-14 April 2011, Detroit, USA, 11PFL-0413
DOI: 10.4271/2011-01-0376

von Seggern, H.G.; Haslbeck, K.; Seume, J.R. (2011): Numerical Study of Aerosol Generation in the Deep Human Lung,  Proceedings of 10th International Symposium on Experimental and Computationel Aerothermodynamics of Internal Flows (ISAIF), 4-7 June 2011, Brussels, Belgium

Adamczuk, R.; Aschenbruck, J.; Bartelt, M.; Herbst, F.; Seume, J.R. (2011): Inverse Methods in Turbomachinery Applications,  Aachen Conference on Computational Engineering Science, ACCES 2011, Aachen

Natkaniec, C.K.; Kammeyer, J.; Seume, J.R. (2011): Influence of Variable Nozzle Geometry on Radial Turbine Performance,  Proceedings of the International Gas Turbine Congress, 13-18 November 2011, Osaka, Japan, IGTC2011-0112

Kammeyer, J.; Natkaniec, C.K.; Seume, J.R. (2010): Influence of Tip-Gap Losses on the Stage Efficiency of Downsizing Turbocharger Turbines,  Proceedings of 9th International Conference on Turbochargers and Turbocharging (IMechE), 19-20 May 2010, London, UK

Kammeyer, J.; Seume, J.R. (2010): Gasturbine Range Extender – Serial Full Hybrid,  IZB 2010 Workshop, October 7, Wolfsburg

Bartelt, M.; Mohseni, A.; Opilat, V.; Seume, J.R. (2009): Endoscopic Stereoscopic PIV Measurements in Turbomachines,  Posterbeitrag International Symposium on 25 Years of Particle Image Velocimetry in Aerodynamics, 23-25 September 2009, Göttingen, Germany

Kleppa, O.; Barchewitz, L.P.; Seume, J.R. (2009): Conceptual Analysis, Dynamic Modelling and Controls of an Air Supply System for In-Flight Proton Exchange Membrane Fuel Cells (PEM-FC),  Proceedings of 2nd International Workshop on Aircraft System Technologies, 26-27 March 2009, Hamburg, Germany

Haslbeck, K.; Seume, J.R. (2009): Aerosol Formation in the Alveoli – in Search of Sensitive Parameters Using Computational Fluid Dynamics,  Proceedings of 17th International Congress of the International Society for Aerosols in Medicine, 10-14 May 2009, Monterey, California, USA, Abstract in the Journal of Aerosol Medicine and Pulmonary Drug Delivery, Vol. 22, Issue 2, p. 204

Kuschel, M.; Seume, J.R. (2009): Influence of the wakes of Rotating Spokes on the Performance of a Turbine Exhaust Diffuser,  Proceedings of 9th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF9), 8-11 September 2009, Gyeongju, Korea, Paper No. isaif9-055

(2008): Numerical Analysis of the Formation Process of Aerosols in the Alveoli,  61st Annual Meeting of the APS Division of Fluid Dynamics, 23-25 November 2008, San Antonio, Texas, USA, Abstract in the Bulletin of the American Physical Society Vol. 53, Issue 15, p. 115

Gómez, A.; Seume, J.R. (2008): Rotor-Tower Interaction in HAWTs,  Proceedings of 4th PhD Seminar on Wind Energy in Europe, 1-2 October 2008, Magdeburg, Germany

Henke, M; Guendogdu, Y.; Seume, J.R.; Siewert, C.; Panning, L.; Wallascheck J. (2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of Turbine Blading,  Proceedings of 9th International Conference on Vibrations in Rotating Machinery (IMechE), 08.- 10. September 2008, Exeter, UK

Beil, A.; Seume, J.R. (2006): Conceptual Analysis and Preliminary Design of a Centrifugal Compressor for an In-flight PEMFC Air Supply System,  H2-Expo, International Conference and Trade Fair on Hydrogen and Fuel Cell Technologies, 25-26 October 2006, Hamburg, Germany

Seume, J.R.; Herbst, F.; Missirlis, D.; Yakinthos, K.; Goulas, A. (2006): Numerical Model of the Unsteady Interaction between Probe and Flow in Axial Turbomachinery,  XVIII Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines, 21-22 September 2006, Thessaloniki, Greece

Shaaban, S.; Seume, J.R.; Berndt, R.; Pucher, H.; Linnhoff, H.-J. (2006): Part-Load Performance Prediction of Turbocharged Engines,  Proceedings of 8th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2006, London, UK, C647/019

Shaaban, S.; Seume, J.R. (2006): Analysis of Turbochargers Non-Adiabatic Performance,  Proceedings of 8th International Conference on Turbochargers and Turbocharging (IMechE), 17-18 May 2006, London, UK, C647/027

Kang, G.; Seume, J.R.; Gündogdu, Y.; Herzog, N.; Rothe, K. (2005): Development of a Measuring Technique for the Investigation of Windage Phenomena in a Four-Stage Air Turbine,  Proceedings of 7th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 11-15 September 2005, Tokyo, Japan, Vol. 1, pp. 31-36

Pietrasch, R.Z.; Seume, J.R. (2005): Interaction between Struts and Swirl Flow in Gas Turbine Exhaust Diffusers,  Proceedings of 7th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF), 11-15 September 2005, Tokyo, Japan, Vol. 1, pp. 37-42

Hagelstein, D.; Beyer, B.; Seume, J.R.; Rautenberg, M.; Hasemann, H. (2002): Heuristical View on the Non-Adiabatic Coupling System of Combustion Engine and Turbocharger,  Proceedings of 7th International Conference on Turbochargers and Turbocharging (IMechE), 14-15 May 2002, London, UK, pp. 349-360

Mobarak, A.; Rautenberg, M.; Hagelstein, D. (2000): Energy and Environment in the Global World,  7th International Conference on Energy and Environment, Cairo, Egypt, 11-13 March 2000

Sentker, A.; Riess, W. (2000): Three Dimensional Unsteady Flow and Turbolence in a Two-Stage Axial Compressor,  Proceedings of 9th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, 4-8 September 2000, Lyon, France

Riess, W.; Walbaum, M. (1995): Initiation and Propagation of Flow Instabilities in Multi-Stage Axial Compressors,  AGARD PEP 85th Symposium on “Loss Mechanisms and Unsteady Flows in Turbomachines”, 8-12 May 1995, Derby, UK

Janssen, M.; Seume, J.R.; Hönen, H.; Lösch-Schloms, R.; Gallus, H.E. (1993): Flow Field Analysis of the Axial Compressor of the Siemens V84.3.,  20th International Congress on Combustion Engines (CIMAC), 1993, London, UK

Beale, W.T.; Seume, J.R. (1989): Solar-Powered Free-Piston Stirling Generator,  4. Jahreskongress des International Hightech-Forum Basel „Umwelt und regenerative Energie-Sonnenenergie und solarer Wasserstoff“, 30 November - 01 December 1989, Basel, Switzerland

Seume, J.R.; Simon, T.W. (1988): Effect of Transition on Oscillating Flow Losses in Stirling Engine Coolers and Heaters,  23th Intersociety Energy Conversion Engineering Conference, 1988, New York, New York, USA, pp. 127-132

Goldberg, L.F.; Seume, J.R.; Simon, T.W. (1987): Description of an Oscillating Flow Test Program,  22th Intersociety Energy Conversion Engineering Conference, 1987, New York, New York, USA, pp. 1753-1758

Seume, J.R.; Simon, T.W. (1986): Oscillating Flow in Stirling Engine Heat Exchangers,  21th Intersociety Energy Conversion Engineering Conference, 1986, Washington D.C., USA, pp. 533-538

Kwitschinski, T.; Henke, M.; Bartelt, M. Seume, J.R. (2020): Ventilation im Teil- und Schwachlastbetrieb von HD- und ND-Dampfturbinen,  Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 379-394
ISBN: 978-3-944310-04-6

Siemann, J.; Fleige, H.-U.; Willers, O.; Seume, J.R. (2020): Mehr Effizienz durch kleinere Spalte – Untersuchungen zur Druckverteilung im Radrückraum eines schnelllaufenden Radialverdichters,  Pumpen und Kompressoren für den Weltmarkt 2020, VDMA-Verlag, pp. 66-72

Willeke, T.; Herbst, F; Seume, J.R. (2016): Strömungsbeeinflussung für zukünftige Flugtriebwerke,  Ingenieurspiegel, Ausgabe März 2016

Müller, C.; Herbst, F; Seume, J.R. (2015): Turbomaschinen in Flugzeugen: Entwicklung, Optimierung und Regeneration für Flugtriebwerke und Kompressoren,  Ingenieurspiegel, Ausgabe März 2015

Schmidt, B.; Ernst, B.; Wilms, M.; Hildebrandt, A.; Hansen, M. (2014): Messdatenbasierte Empfehlungen von Wind- und Wellenparametern für die Auslegung von Offshore-Windenergieanlagen,  Bautechnik, 91: 533-542
DOI: 10.1002/bate.201400033

Seume, J.R.; Wark, M.; Kleppa, O. (2009): Brennstoffzellen – Saubere und effiziente Stromproduktion der Zukunft,  Unimagazin Hannover, Ausgabe 1/2-2009

Seume, J.R.; Kuschel, M. (2009): Einsatzfeld Turbomaschinen – Effiziente Turbinen für Umweltfreundliche Kraftwerke,  Unimagazin Hannover, Ausgabe 1/2-2009

Rolfes, R.; Schaumann, P.; Seume, J.R., et al. (2009): Windenergieforschung an der Leibniz Universität Hannover,  Unimagazin Hannover, Ausgabe 1/2-2009

Hellmich, B.; Seume, J.R. (2008): Causes of Acoustic Resonance in a High-Speed Axial Compressor,  J. Turbomach 130(3), 031003 (May 02, 2008) (9 pages)
DOI: 10.1115/1.2775487

Lohse, S.; Seume, J.R.; Moreau, S. (2024): Aeroakustische Skalierung einer Verdichterleitschaufelreihe,  Fortschritte der Akustik - Tagungsband der DAGA 2024
ISBN: 978-3-939296-22-5

van der Heiden, A.; Willke, M.; Beckmann, J.; Steveker, N.; Stährfeldt, F.; Mellmann, J.; Fritsch, F. W.; Nachtigal, P.; Mimic, D. (2024): Students Designing a Hydrogen-Powered UAV: A Flying Test Bench for Lightweight Energy Systems,  Deutscher Luft- und Raumfahrtkongress 2023
DOI: 10.25967/610219

Klunker, C.; Nachtigal, P.; Kentschke, T.; Gößling,S.; Seume, J.R. (2021): Auslegung eines Anodenrezirkulationsgebläses auf Basis des Medienspaltmotors,  FC³ - 2nd Fuel Cell Conference Chemnitz 2022

Amer, M.; Maroldt, N.; Seume, J.R. (2020): Investigation of Multiharmonic Effects in a Single Stage High Speed Compressor,  Deutscher Luft- und Raumfahrtkongress 2019, Darmstadt, Deutsche Gesellschaft für Luft- und Raumfahrt
DOI: 10.25967/490212

Denkena, B., Gilge, P., Nübel, N., Seume, J.R. (2020): Regeneration Komplexer Investitionsgüter Systemdemonstrator,  Proceedings of the 20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), 2. Dezember 2020, Hannover, S. 39-52

Willeke, S.; Schmolke, D.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J.R. (2020): Mistuning mit Aero-Kopplung II - Abschlussbericht No 1269,  FVV-Informationstagung Turbomaschinen, Forschungsvereinigung Verbrennungskraftmaschinen, Würzburg

Flinte, J.; kleine Sextro, T.; Eilts, P.; Seume, J.R. (2018): Verdichtervariabilität zur Reduzierung des Scavenging im Low-End-Torque-Bereich eines einstufig aufgeladenen Ottomotors,  Ladungswechsel im Verbrennungsmotor 2017, Springer Fachmedien Wiesbaden, 173-191, Wiesbaden
DOI: 10.1007/978-3-658-22671-8_10
ISBN: 978-3-658-22671-8

Schwerdt, L.; Seume, J.R. (2018): Implementation and Experimental Verification of Active Flow Control by Jet Injection over a Coanda Surface in a Multi-Stage High-Speed Axial Compressor,  5th International Conference on Experimental Fluid Mechanics ICEFM 2018 Munich, Germany, July 2-4, 2018

Neben, M., Zaussinger, F., Schwarzbach, F., Egbers, Ch. (2017): Numerische Simulation der Kavitationsbildung in schnellrotierenden hydrodynamischen Gleitlagern,  Kolloquium Fluidenergiemaschinen - FEM 2017, 02. - 03.03.2017

Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2017): Kompakte Elektrisch Angetriebene Turbokompressoren für ein Aktives Hochauftriebssystem Künftiger Verkehrsflugzeuge,  E-MOTIVE Expertenforum, 5-6 September 2017, Hannover, Germany

Willeke, T.; Seume, J.R. (2017): Verbessertes Teillastverhalten mehrstufiger Axialverdichter durch gezielte Strömungsbeeinflussung,  LiFE 2050 - Tag der Energieforschung 2017, 4 Mai 2017, Leibniz Universität Hannover

Schwerdt, L.; Siemann, J.; Seume, J.R. (2016): Active Flow Control Implemented in a Multi-Stage High-Speed Axial Compressor,  87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung(DMV), Proceedings in Applied Mathematics and Mechanics (PAMM), 07-11 March 2016, Braunschweig
DOI: 10.1002/pamm.201610311

Langer, S; Ring, T.; Hurfar, M.C.; Seume, J.R. (2016): Erfahrungen mit der interdisziplinären und standortübergreifenden Vorlesung "Einführung in die Technische Akustik",  42. Jahrestagung für Akustik – DAGA 2016, Aachen. More info

Fräger, L.; Brand, C.R.; Seume, J.R. (2016): Robustheit des Delay-and-Sum-Beamformers gegenüber fehlerbehafteten Eingangsgrößen,  42. Jahrestagung für Akustik – DAGA 2016, Aachen. More info

Willeke, S.; Meinzer, C.; Panning-von Scheidt, L.; Schönenborn, H. (2015): Mistuning Aerodynamisch und Strukturmechanisch Gekoppelter Beschaufelungen,  FVV Zwischenbericht, Heft R 573 (Herbsttagung 2015), Würzburg

Kellersmann, A.; Gilge, P.; Seume J.R.; Friedrichs J. (2015): Performance Impact of High Pressure Compressor Blisk Roughness,  64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015, Rostock, Germany

Drechsel, B.; Herbst, F.; Seume, J.R. (2015): Instationäre Validierung von PIV-Messungen in einem Skalierten Abgas-Ringdiffusor einer Gasturbine,  In: Beckmann, M., Hurtado, A.; Kraftwerkstechnik 2015 - Strategien, Anlagentechnik und Betrieb; SAXONIA Verlag, S. 489-453

Hennecke, C.; Hartmann, U.; von der Haar, H.;Dinkelacker, F.; Seume, J.R. (2015): Correlation of Defects in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases and Numerical Analysis,  64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015, Rostock

Mumcu, A.; Thouault, N.; Broszat, D.; Seume, J.R. (2015): Experimenteller Aufbau zu Untersuchungen der Modenausbreitung in Niederdruckturbinengittern,  41. Jahrestagung für Akustik – DAGA 2015, Nürnberg

Hurfar, M.; Seume, J.R. (2015): Untersuchung des Einflusses von Schutzgittern für Mikrofone in einem Hochgeschwindigkeits-Windkanal,  41. Jahrestagung für Akustik – DAGA 2015, Nürnberg

Brand, C.R.; Seume, J.R. (2015): Einfluss Unterschiedlicher Datenbearbeitung bei der Schallquellenlokalisierung an Klappen für Windenergieanlagen,  41. Jahrestagung für Akustik – DAGA 2015, Nürnberg

Meinzer, C.E.; Schmitt, S.; Seume, J.R. (2014): Akustische Anregung von Schaufelschwingungen,  14. Statusseminar der AG Turbo, Verbundprojekt für das emissionsarme Kraftwerk „AG Turbo 2020“, 8-9 Dezember 2014, DLR, Köln-Porz

Koupeny, J.; Bresemann, D.; Meinzer, C.; Mertens, A.; Ponick, B.; Seume, J.R. (2014): Universelles Werkzeug zur Steigerung der Energieeffizienz von technischen Prozessen am Beispiel eines Prozesskühlsystems mit elektrischer Antriebstechnik,  SIMPEP Kongress, 17-18 September 2014, Koblenz/Lahnstein

Meinzer, C.E.; Wolff, T.; Hauptmann, T.; Seume, J.R. (2014): Aeroelastic Analysis of Turbomachinery using TRACE,  TRACE User Conference, 24-27 March 2014, Cologne

Freund, O.; Meinzer, C.E.; Seume J.R. (2014): Validierung und Einsatz eines optischen Tip-Timing Systems in einem Axialverdichter,  Zustandsbewertung in der Energie- und Anlagentechnik, Fachtagung TÜV Süd, 19.-20. March 2014, Munich

Brand, C.R.; Seume, J.R. (2014): Quantifizierung der globalen Schallemission eines skalierten Flügelprofils mit Hinterkantenklappe für Windenergieanlagen,  40. Jahrestagung für Akustik – DAGA 2014, Oldenburg

Kwitschinski, T.; Gustav, D.; Gerkens, P.; Seume, J. (2014): Einfluss der Filletgeometrie auf die Ausbildung von Sekundärströmungen in einer Turbinenstufe,  Beitrag in: Beckmann, M.; Hurtado, A. (Hrsg.): Kraftwerkstechnik 2014 - Strategien, Anlagentechnik und Betrieb.
ISBN: 978-3-934409-64-4

Adamczuk, R.; Buske, C.; Röhle, I.; Hennecke, C.; Dinkelacker, F.; Seume, J.R. (2013): Beurteilung von Störungen in Flugtriebwerken,  2. Kolloquium des SFB 871 - Zukünftige Regenerationstechnologien, 12. November 2013, Hannover

Bartelt, M.; Witthaus, S.; Seume, J.R. (2013): Experimentelle Untersuchungen an einem Aeroakustik-Windkanal für Turbomaschinenanwendungen - Eine Übersicht über aktuelle Entwicklungen,  DGLR-/DEGA-Workshop "Simulation und Validierung bei Strömungsschallproblemen in der Luftfahrt, Fahrzeug- und Anlagentechnik", 20-21 November 2013, München

Drechsel, B.; Seume, J.R. (2013): Verbesserung des Druckrückgewinns in Axialdiffusoren für GuD-Kraftwerke,  Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik – Sichere und nachhaltige Energieversorgung, Band 5; TK Verlag Karl Thomé-Kozmiensky, 2013, S. 445-459, ISBN: 978-3-944310-04-6.

Drechsel, B.; Hohenstein, S.; Aschenbruck, J.; Seume, J.R. (2013): Einfluss betriebs- und regenerationsbedingter Varianzen von Turbinenschaufeln,  VGB-Fachtagung “Gasturbinen und Gasturbinenbetrieb 2013”, 11 June 2013, Friedrichshafen

Ernst, B.; Seume J.R. (2013): Investigation of Structural Uncertainty of Wind Turbine Rotor Blades,  6. Dresdner Probabilistik-Workshop, 10-11 Oktober 2013, Technische Universität Dresden

Hohenstein, S.; Gilge, P.; Raulf, C.; Seume, J.R. (2013): Einfluss lokaler Rauheiten auf die aerodynamischen Verluste von Turbinenschaufeln,  Deutscher Luft- und Raumfahrtkongress 2013, 10-12 September, Stuttgart

Tesch, M.; Aschenbruck, J.; Hohenstein, S.; Schmidt, A.; Seume, J.R. (2013): Technik entdecken - Schüler-Lehrer-Tag an der Universität Hannover,  Gesellschaft für Didaktik der Chemie und Physik Jahrestagung in Hannover 2012

Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J.R. (2013): Steigerung der Energieeffizienz durch intelligente Nutzung elektrischer Antriebssysteme,  ETG Kongress, 5-6 November 2013, Berlin

Seume, J.R.; Teichel, S.H.; Burnazzi, M.; Schwerter, M.; Behr, C.; Rudenko, A.; Schmitz, A.; Dörbaum, M.; Atalayer, C. (2013): SFB 880 – Efficient High Lift,  62. Deutscher Luft- und Raumfahrtkongress 2013, 10-12 September, Stuttgart, Deutschland, DLRK2013_301273

Eilts, P.; Gehrke, S.; Kaack, M.; Sourell, R.; Wolf, R.; Munack, A.; Pabst, C.; Krahl, J.; Montenegro, R.E.; Meier, M.A.R.; Brümmer, A.; Hütker, J.; Nikolov, A.; Seume, J.R.; Kunte, H. (2012): Motorenentwicklung im Nutzfahrzeug,  1. VDI-Konferenz, 27-28 September 2012, Stuttgart

Seume, J.R.; Müller-Kirchenbauer, J.; Kurrat, M.; Biester, M. H.-O; Munzel, B.; Derlien, H. (2012): Power-to-Gas-to-Power - Schnittstellendynamik bei der Einspeisung und Rückwandlung elektrolytisch erzeugten Wasserstoffs in das Gasnetz,  Kraftwerkstechnisches Kolloquium, 23–24 Oktober 2012, Dresden

Bartelt, M.; Seume, J.R. (2011): Auslegung und Optimierung eines Aeroakustik-Kanals für Turbomaschinenanwendungen unter Verwendung numerischer Methoden,  Deutscher Luft- und Raumfahrtkongress 2011, 27-29 September, Bremen

von Seggern, H.G.; Seume, J.R. (2010): Verlaufskontrolle von Lungenkrankheiten Anhand Exhalierter Aerosole,  28. DECHEMA-Jahrestagung der Biotechnologen, 23 September 2010, Aachen

Lietmeyer, C.; Hohenstein, S.; Naschilevski, S.; Seume, J.R. (2010): Einfluss von Riblet-Strukturen auf den Wirkungsgrad eines Hochgeschwindigkeits-Axialverdichters,  Deutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg

Kleppa, O.; Henke, M.; Seume, J.R. (2010): Verbesserte Nutzung betriebs-beanspruchter Bauteile durch gezielte Regeneration,  Deutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg

Vorreiter, A.; Seume, J.R. (2010): Numerische Untersuchungen zum Wirkungsgrad von Aktiver Strömungsbeeinflussung im Stator eines Mehrstufigen Axialverdichters,  Deutscher Luft- und Raumfahrtkongress 2010, 31 August - 2 September 2010, Hamburg

Gomez, A.; Seume, J.R. (2009): Aerodynamische Turmbelastung (Poster-Beitrag),  Offshore-Windenergie-Kolloquium – ForWind., 4. June 2009, Hanover

Ziesenis, B.; Gündogdu, Y.; Seume, J.R. (2007): Vorstudie Einlaufgeometrie Vorhaben Nr. M1502 – Untersuchung des Einflusses der Verdichter-Einlaufgeometrie auf das Betriebsverhalten von Abgasturboladern,  FVV Informationstagung Motoren/Turbomaschinen, Heft R 537 (2007), Frankfurt

Vorreiter, A.; Ziesenis, B.; Seume, J.R. (2007): Studie TC-Lagerreibung Vorhaben Nr. 908 – Untersuchung und empirische Modellbildung des Reibmomentes von Turboladerlagerungen,  FVV Informationstagung Motoren/Turbomaschinen, Heft R 537 (2007), Frankfurt

Seume, J.R. (2006): Aktuelle Entwicklungstendenzen stationärer Gasturbinen aus Sicht der Forschung,  5. VDI Fachtagung: Stationäre Gasturbinen im Fokus von Wirtschaftlichkeit, Sicherheit und Klimaschutz, 21-22 November 2006, Leverkusen

Sieker, O.; Kluß, D.; Becker, S.; Wiedermann, A. (2006): Hocheffiziente Turbinendiffusoren,  10. Statusseminar der AG Turbo, Verbundsprojekt CO2-Reduktion durch Effizienz „COOREFF-T“, 6-7 December 2006, DLR, Köln-Porz

Seume, J.R. (2006): Brechungsindex und Dichtebestimmung mit der BOS-Methode (Backround Oriented Schlieren Method),  Measurement, 15-16 February 2006, Göttingen

Keppel, W.; Niehuis, R.; Seume, J.R. Weyer, H. (2004): Forschungskonzepte für Turbinenschaufeln,  VDI-Tagung: Effizienzsteigerung von konventionellen und nuklearen Kraftwerken, 18-19 November 2004, Köln, VDI-Bericht 1862, S. 161-175

Abdelhamid, S.; Berndt, R.; Grigoriadis, P.; Hagelstein, D.; Nickel, J.; Pucher, H.; Seume, J.R. (2003): Erweiterte Darstellung und Extrapolation von Turbolader-Kennfeldern als Randbedingung der Motorprozesssimulation,  5. Internationales Stuttgarter Symposium zu Kraftfahrwesen und Verbrennungs­motoren, 18-20 February 2003, Stuttgart

Fleige, H.-U.; Pietrasch, R.Z.; Rieß, W.; Seume, J.R. (2003): Optimierung von Turbinenaustrittsdiffusoren zur Wirkungsgradverbesserung,  VDI-Tagung: Retrofit, 3-4 Juni 2003, Hannover, VDI-Bericht 1769

Levy, Y.; Pismenny, J.; Reissner, A.; Riess, W. (2001): Relationship between Frequencies of Pressure Oscillations and Rotor Speed under Established Rotating Stall in Axial Compressors,  Turbokompressoren im industriellen Einsatz, Tagung Duisburg, 18-19 September, Duisburg, VDI-Bericht 1640

Hagelstein, D.; Beyer, B.; Lübke, H.-P.; Hasemann. H.; Baar, R.; Rautenberg M. (2000): Thermodynamik und Energietransport bei Abgasturboladern unterschiedlicher Regelungen,  Haus der Technik Tagung: Aufladung von Verbrennungsmotoren, 30-31 March 2000, Berlin, Nr. E-H030-03-020-0

Runkel J.; Stegemann, D.; Fiedler, J.; Heidemann, P.; Blaser, R.; Schmidt, F.; Trobitz, M.; Hirsch, L.; Thoma, K. (2000): Schwingungs- und Körperschallmessungen in Siedewasserreaktoren bei Leistungsbetrieb,  Jahrestagung Kerntechnik, 23-25 Mai 2000, Bonn

IFTA Ingenieurbüro für Thermoakustik (2016): Verfahren zur Untersuchung des frequenzabhängigen Schwingungsverhaltens eines Brenners, Erfinder: Jörg R. Seume, Jakob Hermann,  21.01.2016. Anmeldung: 19.03.2004. DE, Patentschrift DE102004013584

Volkswagen (2011): Abgasturbolader mit einer Radialturbine,  Erfinder: Jörg R. SEUME, Peter Wolfgang MANZ, Yavuz GÜNDOGDU, Jasper KAMMEYER. 13.01.2011. Anmeldung: 06.07.2009. DE, Patentschrift DE102009031787

Gottfried Wilhelm Leibniz Universität Hannover (2012): Fluid-flow machine for use in e.g. electric car, has compressor and turbine arranged on shaft that is connected with electrical generator for generating electrical energy, where generator is arranged on shaft between compressor and turbine, Erfinder. Jörg R. SEUME, Jasper KAMMEYER, Christoph NATKANIEC.,  05.04.2012. Anmeldung: 04.10.2010. DE, Patentschrift DE102010047421

Goodrich Hella Aerospace LS (2006): Air Outlet Device for a Vehicle, Erfinder: Jörg R. SEUME, Tom STEGLICH, Stefan THOMASSIN.,  01.06.2006. Anmeldung: 26.11.2004. EP und US, Patentschrift EP1661806 und US2006116063

Siemens (2001): Gas Turbine Blade, Erfinder: Jörg R. SEUME.,  25.01.2001. Anmeldung: 19.07.1999. WO, Patentschrift WO2001006096

Siemens (2000): Acoustic energy reduction method for gas turbine plant, Erfinder: Jörg R. SEUME, Mark OLESEN.,  20.04.2000. Anmeldung: 16.10.1998. DE, Patentschrift DE19849300

Siemens (1998): Burner Configuration and Method for Active Damping of Combustion Oscillations, Erfinder: Jörg R. SEUME, Nicolas VORTMEYER, Jakob HERMANN, Dieter VORTMEYER, Carl-Christian Hantschk, Peter ZANGL, Stephan GLEIS.,  06.08.1998. Anmeldung: 03.02.1998. WO, Patentschrift WO9834067

Siemens (1998): Method and Device for Acoustic Modulation of a Flame Produced by a Hybrid Burner, Erfinder: Jörg R. SEUME, Nicolas VORTMEYER, Stephan GLEIS, Jakob HERMANN, Dieter VORTMEYER. ,  12.03.1998. Anmeldung 19.08.1997. WO, Patentschrift WO9810226

Mumcu, A. (2024): Transmission und Reflexion von Schallmoden durch Schaufelgitter,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2024, 116 S

Maroldt, M. (2023): Aeroelastische Auswirkungen der Schaufel-Rotor-Interaktionin einem 1 1/2-stufigen Axialverdichter,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2023, Band 34, xee, 143 S.
DOI: 10.15488/15543

Zieße, M. (2023): Realitätsnahe Modellierung aerodynamischer Randbedingungen für hochaufgelöste Strömungsberechnungen in Niederdruckturbinen-Kaskaden,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2023, Band 33, xx, 182 S.
DOI: 10.15488/15741

Amer, M. (2023): Operationelle Modalanalyse thermischer Turbomaschinen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2023, Band 35, xix, 180 S
DOI: 10.15488/15544

Frieling, D. (2022): Modellbildung zum Einfluss der instationären Schaufelwechselwirkung auf die Profilverluste in axialen Strömungsmaschinen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2022, Band 32, xxi, 165 S.
DOI: 10.15488/12717

Hurlbrink, J. (2022): Analyse der Aerodynamischen Verlustmechanismen der Radhausströmung von Pkw und Entwicklung von Maßnahmen zur Luftwiderstandsreduktion,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2022, Band 30, xv, 149 S.
DOI: 10.15488/11978

Schwerdt, S. (2022): Transport Akustischer Moden durch einen Mehrstufigen Axialverdichter,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2022, Band 31, xvii, 141 S.
DOI: 10.15488/12040

Willeke, T. (2021): Riblets in mehrstufigen Axialverdichtern,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2021, Band 25, 163 S

Hurfar, C.M (2021): Similarity Conditions for Modal Sound Propagation in Turbomachinery Test Rigs,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 24, xxiv, 197 S.
DOI: 10.15488/11156

Mimic, D. (2021): Turbine-Diffuser Interaction,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 26, XXIII, 121 S.
DOI: 10.15488/10777

Keller, C. (2021): Einfluss Regenerationsbedingter Varianzen auf die Aeroelastik von Verdichterblisks,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2021, Band 27, XI, 131 S.
DOI: 10.15488/11637

Wolff, T. (2021): Aeroelatische Lastminderung von Rotorblättern mit Aktiver Flexibler Hinterkante in Windenergieanlagen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2021, Band 29, xiv, 116 S.
DOI: 10.15488/12111

Müller-Schindewolffs, C. (2021): Entwicklung eines Modells zur Vorhersage Stationärer Transitionsmechanismen in Niederdruckturbinen unter dem Einsatz von Skalenauflösenden Simulationen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2021, Band 28, xviii, 203 S.
DOI: 10.15488/11982

Kwitschinski, T. (2020): Untersuchung nicht-achsensymmetrischer Seitenwandkonturen zur Reduzierung von Sekundärströmungen in Hochdruck-Dampfturbinen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020

Ernst, B. (2020): Einfluss von Geometrie- und Materialunsicherheiten der Rotorblätter auf die Aeroelastik von Offshore-Windenergieanlagen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 22

Winstroth, J. (2020): Optische Erfassung der Rotorblattverformungen von Windenergieanlagen der Multi-Megawatt-Klasse durch digitale Bildkorrelation,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 16, xxviii, 217 S.

Meinzer, C. (2020): Quantifizierung der Aerodynamischen Dämpfung,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 17, xvii, 152 S.
DOI: 10.15488/9800

Hauptmann, T. (2020): Einfluss Regenerationsbedingter Varianzen der Schaufelgeometrie auf Erzwungene Schwingungen in einer Mehrstufigen Turbine,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 19, xvi, 141 S.
DOI: 10.15488/9974

Hartmann, U. (2020): Auflösung und Zuordnung von Defekten im Heißgaspfad von Flugtriebwerken anhand der Dichteverteilung im Abgasstrahl,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 18, xx, 116 S., Anh.
DOI: 10.15488/9979

Bittner, S. (2020): Experimentelle Validierung Numerischer Optimierungen des Schaufelpfades einer Hochdruck-Dampfturbine,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 20, xvii, 109, ix S.
DOI: 10.15488/9985

Wein, L. (2020): Large-Eddy-Simulation von Deckbandlabyrinthdichtungen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 21, xviii, 167 S.
DOI: 10.15488/10202

Fischer, T. (2020): Aerodynamische Auslegung von Radialverdichtern für Aktive Kennfelderweiternde Maßnahmen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2021, Band 23, XIV, 157 S.
DOI: 10.15488/10425

Drechsel, B. (2019): Einfluss Aerodynamischer Auslegungsparameter der Turbinenendstufe auf die Gehäusenahe Rotorabströmung,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2019, Band 14, XVI, 155 S.

Aschenbruck, J. (2019): Durch Regenerationsbedingte Varianz Erzwungene Schwingungen von Turbinenschaufeln,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., Band 15, XVI, 153 S.

Kunte, H. (2019): Kennfelderweiterung einer Supersonischen Axialen Impulsturbine durch Variable Teilbeaufschlagung,  München: Verlag Dr. Hut, 2019, VIII, 151 S.
DOI: 10.15488/4785
ISBN: 978-3-8439-4001-6

Cengiz, K. (2018): Use of Detached Eddy-Simulation for Aerodynamics and Aeroacoustics of Blade Sections,  Middle East Technical University, Graduate School of Natural and Applied Sciences, Ankara, Turkey
DOI: 10.13140/RG.2.2.21006.66889

Flores, D. (2018): Influence of Labyrinth Seals in Cavities on the Flow of an Axial Compressor,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2018, Band 13, xxiv, 159 S.
DOI: 10.15488/3681

Teichel, S. H. (2018): Optimized Design of Mixed Flow Compressors for an Active High-Lift System,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2020, Band 12, xii, 171 S.
DOI: 10.15488/3524

Brand, C.R. (2017): Zur Schallentstehung an den Seitenkanten von Wölbklappen für Windenergieanlagen,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2017, Band 11, xvii, 195 S.
DOI: 10.15488/8947

Peter, J. (2016): Numerische Untersuchung und Optimierung des Laufrades einer Pkw-Abgasturboladerturbine,  AutoUni - Schriftreihe Band 84, Springer: Wiesbaden.
DOI: 10.1007/978-3-658-14026-7
ISBN: 978-3-658-14025-0

Lin, S.-Y. (2016): Coherent Structures and Rotational Effects on the Flow over Spinners of Horizontal Axis Wind Turbine,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2016, Band 8, xix, 111 S.
DOI: 10.15488/8735

Biester, M. (2016): Ausmischverluste und Instationärer Arbeitsumsatz in Turbinen,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2016 Band 10, xvi, 155 S.
DOI: 10.15488/8643

Laguna, J.D. (2016): On the Sensitivity of the Radial Mode Analysis (RMA) for the Experimental Evaluation of Sound Propagation in a Low-Pressure Turbine,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2016, Band 9, xiv, 151 S. More info
DOI: 10.15488/8728

Czapka, T. (2015): Erweiterung des Verdichterkennfeldes eines Abgasturboladers für verbrauchsoptimierte Verbrennungsmotoren,  AutoUni – Schriftenreihe Band 77, Logos Verlag Berlin
ISBN: 978-3-8325-3994-8

Freund, O. (2015): Akustische Anregung von Schaufelschwingungen in Turbomaschinen,  Leibniz Universität Hannover, Berichte aus Institut für Turbomaschinen und Fluid-Dynamik Band 5/2014
DOI: 10.15488/8449

Bartelt, M. (2015): Ein Beitrag zum Ausbreitungsverhalten Modaler Schallfelder in Niederdruckturbinen,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2015, Band 7, xxiii, 239 S.
DOI: 10.15488/8406

Adamczuk, R. (2014): Zustandsbeurteilung eines Triebwerks durch die Analyse des Abgasstrahls,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2014, Band 6

Hohenstein, S. (2014): Einfluss Komplexer Oberflächenstrukturen auf das Aerodynamische Verlustverhalten von Turbinenbeschaufelungen,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2014, Band 4, XV, 149 S.
DOI: 10.15488/8271

Schnückel, C. (2014): Numerische Simulation und Optimierung der Anströmung einer Abgasturboladerturbine,  AutoUni – Schriftenreihe Band 59, Logos Verlag Berlin
ISBN: 978-3-8325-3674-9

Kuschel, M. (2014): Einfluss von Sekundärströmungen auf den Druckrückgewinn in Axialdiffusoren,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2014, Band 3, XXII, 165 S.
DOI: 10.15488/8310

Herbst, F. (2013): Modellierung des Einflusses von Ausblasungen auf die Grenzschichttransition in hochbelasteten Niederdruckturbinen,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2013, Band 2, XXII, 223 S.
DOI: 10.15488/8082

Lietmeyer, C. (2013): Berechnungsmodell zur Widerstandsbeeinflussung Nicht-Idealer Riblets auf Verdichterschaufeln,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2013, Band 1, XXI, 150 S.
DOI: 10.15488/8117

Vorreiter, A. (2012): Aktive Strömungsbeeinflussung im Stator eines mehrstufigen Axialverdichters,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2012, Verlag Dr. Hut, München
ISBN: 978-3843906241

Alhaj, O. (2012): Optical Investigation of Profile Loss in a Linear Turbine Cascade,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss, 2012, Verlag Dr. Hut, München
ISBN: 978-3-8439-0588-6

Kleppa, O. (2012): Blow-By in Abgasturboladern,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2012, Verlag Dr. Hut, München
ISBN: 978-3-8439-0675-3

Natkaniec, C. (2012): Sekundärströmungen in Turboladerturbinen mit variabler Turbinengeometrie,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss, 2012, Verlag Dr. Hut, München
ISBN: 978-3843907590

Binner, M. (2011): Experimentelle Untersuchung von Teil- und Schwachlastzuständen in Hochdruckdampfturbinen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2011, Verlag Dr. Hut, München
ISBN: 978-3-86853-815-1

Haslbeck, K. (2011): Entstehung Exhalierter Tröpfchen in den Terminalen Atemwegen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2011, 165 S.
DOI: 10.15488/7639

Frese, F. (2011): Aerodynamische und strukturmechanische Bewertung des Flutenteilers an Radialturbinen von Turboladern,  Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3868539479

Opilat, V. (2011): Swirl and Blade Wakes in the Interaction Between Gas Turbines and Exhaust Diffusers Investigated by Endoscopic Particle Image Velocimetry,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2011, 78 S.
DOI: 10.15488/7720

Kammeyer, J. (2011): Abgasturbolader mit Deckband zur Verringerung der Turbinenseitigen Spaltverluste,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2011, Verlag Dr. Hut, München
ISBN: 978-3843902465

Oehlert, K. (2011): Zur Applikation von Riblets auf Verdichterschaufeln,  Dissertation, Leibniz Universität Hannover, Verlag Dr. Hut, München
ISBN: 978-3-8439-0003-4

Mohseni, A. (2010): Development of Endoscopic Stereoscopic PIV for Investigating the IGV-Impeller Interaction in a Centrifugal Compressor,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2010, 145 S.
ISBN: 978-3838123943

Gòmez Gonzàlez, A. (2010): Aerodynamic and Aeroelastic Rotor-Tower Interaction in Horizontal Axis Wind Turbines,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2010, Verlag Dr. Hut, München
ISBN: 978-386-85374-8-2

Sieker, O. (2010): Einfluss von Drall und Nachlaufdellen auf Strömung und Druckrückgewinn in Axialen Turbinenaustrittsdiffusoren,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2010, Verlag Dr. Hut, München
ISBN: 978-3-86853-465-8

Imetovski, E. (2010): Anwendung der Infinite-Tube-Technique zur Instationären Druckmessung in der Radialturbine eines Abgasturboladers,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2010, Cuvillier Verlag, Göttingen
ISBN: 978-3-86955-458-7

Goldhahn, E. (2009): Weiterentwicklung der Hintergrundschlierenmethode zu einem Quantitativen Verfahren der Vermessung von Dichtefeldern,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2009, 98 S.
DOI: 10.15488/7209

Gündogdu, Y. (2009): Aktive Strömungsbeeinflussung unter Nutzung des Coanda-Effekts in einem Hochgeschwindigkeits-Axialverdichter,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2009, 114 S.
DOI: 10.15488/7212

Fischer, K. (2008): Instationäres Betriebsverhalten und Thermomechanische Beanspruchung Tubularer Festoxidbrennstoffzellen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2008, 205 S.
DOI: 10.15488/7036
ISBN: 978-3-86853-236-4

Hellmich, B. (2008): Acoustic Resonance in a High-Speed Axial Compressor,  Dissertation, Leibniz Universität Hannover

Barchewitz, L.P. (2008): In-Flight Air Supply System for PEM Fuel Cells,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2008, 142 S.
DOI: 10.15488/7007

Schreyer, B. (2008): Verlustverhalten fräsrauer Turbinen- und Verdichtergitter,  Dissertation, Leibniz Universität Hannover

Müller, D. (2008): Einfluss der Anordnung und des Betriebs auf die Pumpgrenze von Abgasturboladern,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2008, 113 S.
DOI: 10.15488/9707

Braun, M. (2008): Vorwärtspfeilung in einem mehrstufigen hochbelasteten Axialverdichter,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2008, Verlag Dr. Hut, München
ISBN: 978-3-89963-731-1

Herzog, N. (2008): Numerische Untersuchung von Schwachlastströmungen in Mehrstufigen Axialturbinen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2008, 114 S.
DOI: 10.15488/7055

Reissner, A. (2008): Stabilitätsverbessernde Maßnahmen in Axialverdichtern,  Dissertation, Leibniz Universität Hannover

Kanzer, S. (2008): Strömungs- und Verbrennungsdynamik eines drallstabilisierten Gasturbinenbrenners,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2008, Cuvillier Verlag, Göttingen
ISBN: 978-3-86955-161-6

Griebel, A. (2008): Instationäre Untersuchungsmethoden der saugseitigen Statorgrenzschicht in einem Niedergeschwindigkeitsaxialverdichter,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2009, 170 S.
DOI: 10.15488/7211

Steglich, T. (2007): Experimentelle Untersuchungen zum Verbesserungspotential einer Radialverdichterstufe mit interner Spirale,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2007, 146 S.
DOI: 10.15488/9703

Kang, G. (2006): Strömungsmechanische Untersuchungen in einer Axialturbine im Ventilations- und Leerlaufbetrieb,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2006, Verlag Dr. Hut, München
ISBN: 3-89963-297-4

Moreno, L. (2006): Numerische Untersuchung des Clocking-Effekts auf die Hinterkantenausblasung an einer zweistufigen Axialturbine,  Hannover: Gottfried Wilhelm Leibniz Universität Hannover, Diss., 2006, Fortschritt-Bericht VDI Reihe 7 Nr. 483, Düsseldorf: VDI-Verlag
ISBN: 3-18-348307-6

Bubolz, T. (2005): Untersuchungen von randzonenkorrigierten Axialverdichterbeschaufelungen mit Strömungs-Meßsonden,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., Cuvillier Verlag, Göttingen
ISBN: 3-86537-457-3

Fischer, A. (2004): Untersuchungen Hochbelasteter Bow-Statoren in einem Mehrstufigen Axialverdichter,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., Verlag Dr. Hut, München
ISBN: 3-89963-143-9

Shaaban, S. (2004): Experimental Investigation and Extended Simulation of Turbocharger Non-Adiabatic Performance,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2004, 256 S.
DOI: 10.15488/6456

Shieh, T.-H. (2003): Untersuchung von Axialturbinen-Beschaufelungen mit dreidimensionalen Gestaltungselementen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2003, 201 S.
DOI: 10.15488/6268

Klinge, F. (2003): Vermessung von Wirbeln mit der Hintergrundschlieren-Methode: Untersuchung der räumlichen Position und Stärke des kompressiblen Tragflächenspitzenwirbels des Außenflügels eines Transportflugzeuges mit einer stereoskopischen Hintergrundschlieren-Methode und der Stereo Particle Image Velocimetry,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2003, 118 S.
DOI: 10.15488/6205

Fiedler, J. (2002): Schwingungsüberwachung von Primärkreiskomponenten in Kernkraftwerken,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2002, 120 S.
DOI: 10.15488/5985

Tappen, M. (2002): Beitrag zur Optimierung der Kohlenstaubfeuerung im Kraftwerk Wilhelmshaven mit Hilfe neuartiger Kohlenstaubmengenmessung,  Fortschritt-Berichte VDI: Reihe 6, Nr. 489, Düsseldorf: VDI-Verlag

Fleige, H.-U. (2002): Experimentelle und numerische Untersuchungen am Model eines Turbinenaustrittsdiffusors,  Fortschritt-Berichte VDI: Reihe 7, Nr. 442, Düsseldorf: VDI-Verlag

Heidemann, P. (2001): Diagnoseverfahren zur Schwingungs- und Körperschallüberwachung in Siedewasserreaktoren,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2001, 114 S.
DOI: 10.15488/5824

Hagelstein, D. (2001): Experimentelle Untersuchungen an einer Radialverdichterstufe mit verschiedenen Vorleitgittern variabler Geometrie,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2001, 165 S.
DOI: 10.15488/5822

Beyer, B. (2001): Beitrag zur Auslegung von Kühllüftern für Nutzfahrzeuge,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2001, 165 S.
DOI: 10.15488/5783

Harbecke, U. (2001): Aerodynamische Wirkung fertigungsbedingter technischer Rauheiten und Geometriefehler an gefrästen Turbinenschaufeln,  Fortschritt-Berichte VDI: Reihe 7, Nr. 419, Düsseldorf: VDI-Verlag

Sentker, A. (2000): Analyse der instationären turbulenten Strömung in einem Niedergeschwindigkeitsaxialverdichter,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2000, Shaker, Aachen 
ISBN: 3-8265-7476-1

Gehring, S. (2000): Verfahren zur Kennfeldberechnung von stark gekühlten Turbinen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2000, Shaker, Aachen
ISBN: 3-8265-8430-9

Bahm. F.U. (2000): Das Axialschubverhalten von einstufigen Kreiselpumpen mit Spiralgehäuse,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2001, 228 S.
DOI: 10.15488/5778

Walkenhorst, J. (2000): Axialverdichter mit wandkonturierten Leitschaufeln – Prüfstandentwicklung und Strömungsuntersuchung,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2000, Fortschritt-Berichte VDI: Reihe 7, Nr. 390, Düsseldorf: VDI-Verlag

Schmidt, D. (2000): Strömungsuntersuchungen in Dampfturbinen-Endstufen im Heiz- und Schwachlastbetrieb,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 2000, Fortschritt-Berichte VDI: Reihe 7, Nr. 376, Düsseldorf: VDI-Verlag

Shi, L. (1999): Untersuchung instationärer Strömungsvorgänge in hochbelasteten Radialverdichtern,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 1999, 151 S.
DOI: 10.15488/5662

Walbaum, M. (1998): Entstehungsmechanismen und Erscheinungsformen des Rotating Stall in einem sechsstufigen Axialverdichter mit verstellbaren Leitschaufeln,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 1998, Fortschritt-Berichte VDI: Reihe 7, Nr. 352, Düsseldorf: VDI-Verlag

Caspar, V. (1998): Zur numerischen Simulation des turbulenten Impuls- und Massenaustausches in zwangsventilierten Räumen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 1998, Shaker, Aachen 
ISBN: 978-3826537394

Pfitzinger, E.W. (1998): Kennfeldberechnung für Axialverdichter mit systematischer Untersuchung der Verlust- und Umlenkeigenschaften von Schaufelgittern,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 1998, Fortschritt-Berichte VDI: Reihe 7, Nr. 337, Düsseldorf: VDI-Verlag

Hasemann, H. (1997): Untersuchung der Festigkeit und des Schwingverhaltens hochbelasteter Radialverdichterlaufräder,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 1997

Engelkind, S. (1997): Untersuchung der Druckwellenmaschine für Kaltluftanlagen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 1997

Jetter, C. (1997): Strömungstechnische Qualitätskriterien von spanabhebend gefertigten Turbinenschaufelprofilen,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 1997, Fortschritt-Bericht VDI Reihe 7 Nr. 314, Düsseldorf: VDI-Verlag 
ISBN: 318331407X

Kassens, I. (1997): Energieumwandlung im Vorleitgitter eines Radialverdichters,  Hannover: Gottfried Wilhelm Leibniz Universität, Diss., 1997

Jiang, Z. (1997): Energieumsetzung und Schaufelschwingungen bei verschiedenen Geometrien des Nachleitgitters im Radialverdichter,  Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 318, Düsseldorf: VDI-Verlag
ISBN: 3-18-331807-5

Heinrich, M. (1996): Zur Simulation der kompressiblen transsonischen Strömung in einem aerodynamischen hochbelasteten Radialverdichter,  Dissertation, Leibniz Universität Hannover

Meyer, B. (1996): Entwicklung eines Simulators für Zweikreisstrahltriebwerke für Modelluntersuchungen des Standprobelaufs,  Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 12 Nr. 277, Düsseldorf: VDI-Verlag
ISBN: 3-18-327712-3

Baar, R. (1996): Untersuchungen zu Beschleunigungsvorgängen von Partikeln in Düsen und Strahlen,  Dissertation, Leibniz Universität Hannover

Burhorn, D. (1996): Beitrag zur Konzeption eines Abwärme-Compound-Systems an Verbrennungskraftmaschinen in Kraftfahrzeugen,  Dissertation, Leibniz Universität Hannover

Petrovic, M. (1995): Berechnung der Meridianströmung in mehrstufigen Axialturbinen bei Nenn- und Teillastbetrieb,  Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 280, Düsseldorf: VDI-Verlag
ISBN: 3-18-328007-8

Bigalk, J. (1995): Sekundärströmung in der Seitenwandgrenzschicht mehrstufiger Axialverdichter,  Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 295, Düsseldorf: VDI-Verlag
ISBN: 3-18-329507-5

Seidel, U. (1995): Radialverdichter-Kennfeldregelung mittels Nachleitrad,  Dissertation, Leibniz Universität Hannover

Huth, T. (1995): Das instationäre Strömungsverhalten des Totwassergebietes eines oszillierenden Kreiszylinders,  Leibniz Universität Hannover, Shaker, Aachen
ISBN: 3-8265-0575-1

Bayomi, N.N.M. (1995): An Investigation on the Casing Treatment of the Radial Compressors,  Cairo, 9. January 1995

Mattiske, B. (1994): Experimentelle Untersuchung einer mehrstufigen Axialverdichterbeschaufelung mit Randzonenkorrektur,  Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 252, Düsseldorf: VDI-Verlag
ISBN: 3-18-325207-4

Waltke, U. (1994): Berechnung des Meridianströmungsfeldes in Axialverdichtern mit der Methode der Finiten Elemente,  Dissertation, Leibniz Universität Hannover, Fortschritt-Bericht VDI Reihe 7 Nr. 261, Düsseldorf: VDI-Verlag, ISBN: 3-18-326107-3

Rüffer, B. (1990): Zur Simulation des Zeitverhaltens einfacher Dampfkraftanlagen,  Dissertation, Leibniz Universität Hannover

Malobabic, M. (1989): Das Betriebsverhalten leitschaufel- und bypassgeregelter PKW-Abgasturbolader,  Dissertation, Leibniz Universität Hannover

Schulz, Y.; Seume, J.R. (2023): Nachhaltige Konzepte für Wasserstoffmotoren,  Wissen aus Hochschulen in Niedersachsen
DOI: 10.60479/5MN6-1998

Sagan, L.; Kuestner, C.; Eilts, P.; Seume, J.R. (2022): Final Report: Single Stage Charging System for SI-Engines Operated with λ=2 in the Range of the WLTC,  FVV Abschlussbericht, Heft 1298 (2022), Frankfurt

Qiu, J.; Zhang, Q.; Zhang, M.; Du, J.; Zhang, W.; Maroldt, N.; Seume, J.R. (2022): Stall Behaviour in a Mixed-flow Compressor with Axial Slot Casing Treatment,  Journal of Thermal Science 31, 13-24

Di Modica, D.-V.; Nachtigal, P.; Kentschke, T.; Eilts, P.; Seume, J.R. (2021): Echtzeitfähige Untersuchung der pulsierenden Turbinenbeaufschlagung und Verdichterabnahme eines Turboladers unter motorähnlichen Randbedingungen,  FVV Abschlussbericht, Heft 1279

Willers, O.; Zeh, C.; Schwarze, H.; Seume, J.R. (2020): Thermally influenced TC Bearing Friction,  Final Report H1219-V1238, Forschungsvereinigung Verbrennungskraftmaschinen e.V., Frankfurt a. M.

Kluge, T.; Wein, L.; Oettinger, M.; Seume, J.R. (2020): Abschlussbericht: AG Turbo COOREflex-turbo Vorhaben 4.2.5a: Optimaler Deckbandrückschnitt bei Turbinenlaufschaufeln,  Leibniz Universität Hannover, Garbsen

Schwarzbach, F.; Herbst, F.; Seume J. R.; (2019): Skalenauflösende Simulationen zur Untersuchung des aeroelastischen Verhaltens von Turbomaschinen,  Forschung im HLRN-Verbund 2019, Herausgeber: Konrad-Zuse-Zentrum für Informationstechnik Berlin, Berlin
ISBN: 978-3-00-063360-7

Bittner, S.; Kleinhaus, M.; Seume, J.R. (2019): Abschlussbericht: AG Turbo COOREflex-turbo Vorhaben 4.1.3 A: Innovativer Dampfturbinen-Schaufelpfad für hohe Leistungsdichten,  Leibniz Universität Hannover, Hannover
DOI: 10.2314/KXP:1701956497

Hofmann, L.; Mertens, A.; Ponick, B.; Mathis, W.; Seume, J.R. (2018): Aggregierte Modelle für die Simulation von dynamischen Vorgängen in elektromechanischen Energiesystemen (AMSES),  Abschlussbericht, TEWISS-Technik und Wissen GmbH, Hannover
ISBN: 978-3-95900-212-7

kleine Sextro, T.; Fischer, T.; Flinte, J.; Eilts, P.; Seume, J.R. (2018): Querschnittsvariabler Radialverdichter - Aktive Maßnahmen zur Kennfelderweiterung eines Radialverdichters durch Querschnittsvariation für turboaufgeladene Ottmomotoren,  Abschlussbericht, Heft Nr. 1161, FVV Frankfurt

Willers, O.; Seume, J.R. (2018): ORC-Turbinen-Generatoreinheit für Lkw,  Stahl-Innovationspreis 2018, Herausgeber: Wirtschaftsvereinigung Stahl, Düsseldorf, S. 38-39

Burgmann, S.; Fischer, T.; Rudersdorf, M.; Heinzel, A.; Seume, J.R. (2017): Entwicklung eines Kleingebläses mit veränderlichem Diffusor und angepasster, veränderlicher Spirale für Brennstoffzellensysteme,  Abschlussbericht: Entwicklung eines Kleingebläse mit veränderlichem Diffusor und angepasster, veränderlicher Spirale für Brennstoffzellensysteme, IGF Abschlussbericht (18100 N), Heft R579

Kauth, F.; Narjes, G.; Müller, J.; Ponick, B.; Mertens, A.; Seume, J.R. (2017): Compact Electrical Compressors for Active Flow Control in Autonomous High-Lift Systems,  "SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft: Biennial Report", Rolf Radespiel, Richard Semaan, TU Braunschweig, Braunschweig

Kunte, H.; Willers, O.; Peters, M.; Seume, J.R. (2017): Expansionsmaschine (CO2-Programm),  FVV Abschlussbericht, Heft 1139 (2017), Frankfurt

Seume, J.R.; Drechsel, B. (2015): Einfluss von Stützrippen auf die Sekundärströmung in Turbinendiffusoren,  AG Turbo Abschlussbericht

Teichel, S.H.; Dörbaum, M.; Ponick, B.; Seume, J.R. (2015): Compact Dynamic Compressors for Active Flow Control in High-Lift Configurations,  "SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft: Biennial Report", Rolf Radespiel, Richard Semaan, TU Braunschweig, Braunschweig

Ernst, B.; Wilms, M.; Hildebrandt, A.; Schlurmann, T.; Seume J.R. (2015): Action Effects of Wind and Waves (WP 2), In: Probabilistic Safety Assessment of Offshore Wind Turbines,  Schlussbericht zum Forschungsvorhaben PSA-OWEA, S. 29-45, Leibniz Universität Hannover, ForWind Zentrum für Windenergieforschung
DOI: 10.2314/GBV:837382378

Denkena, B. (2015): vStruct-virtuelle Optimierung der Fertigung lokal angepasster Riblet-Strukturen auf einer dreidimensionalen Turbomaschinenbeschaufelung ,  Abschlußbericht 2015, Hrsg.: Berend Denkena, PZH Verlag, Seite 339-372, Pro³gression diligent production, ISBN 978-3-95900-030-7

Rätz, H.; kleine Sextro, T.; Lübbert, N.; Seume, J.R. (2014): Modellierung der Wärmeströme in der Welle eines Turboladers basierend auf CHT-Simulationen,  FVV Abschlussbericht, Heft R 571 (2014), Frankfurt

Teichel, S.H.; Seume, J.R.; Dörbaum, M.; Ponick, B. (2013): Compact Dynamic Compressors for Active Flow Control in Autonomous High Lift Configurations,  SFB 880 - Fundamentals of High Lift for Future Commercial Aircraft Biennial Report. Braunschweig: TU Braunschweig - Campus Forschungsflughafen
ISBN: 978–3–928628–63–1

Herbst, F.; Eilts, P.; Porzig, D.; Schwarze, H.; kleine Sextro, T; Seume, J.R. (2012): Grundlegende Technologien zur Hochaufladung von Fahrzeugmotoren,  NTH-Abschlussbericht (BU 2.2.4)

Seume, J.R.; Kuschel, M. (2011): Sekundärströmungen in Turbinendiffusoren,  Abschlussbericht, Forschungsvorhaben 0327717B, Vorhaben-Nr.: 4.2.9 der AG Turbo COORETEC-turbo, December 2011

Seume, J.R.; Sieker, O. (2008): Hocheffiziente Turbinendiffusoren – Teil A: Experimentelle Untersuchungen,  Abschlussbericht, Forschungsvorhaben 0327720E, Vorhaben-Nr.: 4.2.8.A der AG Turbo COOREFF-T, April 2008, Verbundprojekt CO2-Reduktion durch Effizienz

Müller, D.; Grigoriadis, P. (2007): Dynamische Pumpgrenze Vorhaben Nr. 845 – Dynamisches Verhalten von Turboladern nahe der Pumpgrenze,  FVV Abschlussbericht, Heft 833 (2007), Frankfurt

Seume, J.R.; Goldhahn, E.; Steglich, T.; van den Braembussche, R.A.; Prinsier, J.; Alsalihi, Z.; Verstraete, T. (2007): Vorleitradoptimierung II Vorhaben Nr. 846 – Strömungsvorgänge zwischen Vorleitapparat und Laufrad eines Radialverdichters und ihre gegenseitige Beeinflussung,  FVV Abschlussbericht, Heft 838 (2007), Frankfurt

Braun, M. (2005): Vorwärtsgepfeilte AV-Beschaufelung, Vorhaben Nr. 800 – Experimentelle Untersuchung einer vorwärts gepfeilten Beschaufelung in einem mehrstufigen Axialverdichter,  FVV Abschlussbericht, Heft 808 (2005), Frankfurt

Steglich, T; Seume, J.R.; Shaaban, S. (2005): Radialverdichterkennfeld Vorhaben Nr. 823 – Erstellung einer Kennfeldberechnungsmethode zur Inter- und Extrapolation des gemessenen Radialverdichterkennfeldes anhand vorhandener FVV-Ergebnisse,  FVV Abschlussbericht, Heft 813, Heft R 529 (2005), Frankfurt, S. 119-138

Seume, J.R. (2004): Forschungskonzepte für Turbinenschaufeln,  Beitrag in: Keppel, W., Niehuis, R., Weyer, H.: „Effizienzsteigerung von konventionellen und nuklearen Kraftwerken“, Hrsg.: VDI-Gesellschaft Energietechnik, Düsseldorf: VDI-Verlag 2004, VDI-Bericht Nr. 1862, S. 161/175

Seume, J.R. (2004): Beitrag der AG Turbo zur Wirkungssteigerung von Gasturbinen,  Beitrag in: „Stationäre Gasturbinen: Fortschritte und Betriebserfahrungen“, Hrsg.: VDI-Gesellschaft Energietechnik, Düsseldorf: VDI-Verlag 2004, VDI-Bericht Nr. 1857

Steglich, T.; Kitzinger, J.; Seume, J.R.; van den Braembussche, R.; Prinsier, J. (2003): Strömungsvorgänge in spiralförmigen Sammelräumen für Radialverdichterstufen,  FVV Abschlussbericht, Heft 773 (2003), Frankfurt

Seume, J.R.; Pucher, H.; Bohn, D. (2002): TC-Gesamtkennfeldbestimmung / TC-Wärmeströme – Erweiterte Darstellung und Extrapolation von Turbolader-Kennfeldern als Randbedingung der Motorprozesssimulation / Modellierung des Wärmeflusses im und am System Turbolader.,  FVV Abschlussbericht, Heft R 517 (2002), Frankfurt, S. 39-62

Fischer, A.; Seume, J.R. (2001): Bow-Beschaufelung Vorhaben Nr. 737 – Numerische und experimentelle Untersuchung von Bow-Statoren in einem hochbelasteten Axialverdichter,  FVV Abschlussbericht 2001, Frankfurt

Hagelstein, D.; Prinsier, J.; Van den Braembussche, R.A. (2001): Vorleitradoptimierung I Vorhaben Nr. 705 – Vorleitrad - Laufrad Strömungsoptimierung und Interaktion,  FVV Abschlussbericht, Heft 705 (2001), Frankfurt

Gehring, S.; Rieß, W. (2000): 2d-FE-Verfahren für die Kennfeldberechnung von vielstufigen Turbinen mit unter- und überkritischen Stufendruckverhältnissen mit variabler Kühlluftzufuhr,  Abschlußbericht zum Vorhaben 1.312 im Teilverbund-Projekt Turbotech der Arbeits­gemeinschaft Hochtemperatur-Gasturbine

Ayder, E.; Hillewaert, K.; Van den Braembussche, R.; Zeoli, D.; Seidel, U.; Hagelstein, D. (1998): Spiralströmungen I Vorhaben 606 – Strömungsvorgänge in spiralförmigen Sammelräumen für Radialverdichter,  FVV Abschlussbericht, Heft 606 (1998), Frankfurt

Gehring, S.; Rieß, W. (1995): Modelle zur Bestimmung der Stabilitätsgrenze von Axialverdichtern,  VDI Berichte Nr. 1208, S. 221-235

Janssen, M.; Seume, J.R.; Zimmermann, H. (1994): Strömungsanalyse der Einzelstufen einer mehrstufigen Turbine und eines mehrstufigen Verdichters einer Gasturbine zur Verbesserung der Strömungsrechenverfahren,  Abschlussbericht zum Vorhaben HTGT-Turbotech 1.1.1.1 / 1.1.1.3., Siemens AG, Bereich Energieerzeugung (KWU)

Jetter, Ch.; Riess, W. (1994): Strömungstechnische Eigenschaften von Turbinenschaufelprofilen unterschiedlicher Fertigungsqualitäten,  VDI Berichte Nr. 1109, S. 241-259

Seume, J.R.; Friedman, G.; Simon, T.W. (1992): Fluid Mechanics Experiments in Oscillatory Flow,  NASA Contractor Report 189127, March 1992

Bigalk, J.; Riess, W. (1992): Experimentelle und numerische Untersuchung der Seitenwand-Grenzschicht in einer Axialverdichterstufe,  VDI Berichte Nr. 947, S. 19-40

Rautenberg, M., Haupt, U., Hasemann, H. (1990): Schwingungserregung bei Radialverdichterrädern – Dimensionierungskriterien bei der Festigkeitsauslegung,  FVV Abschlussbericht zum Vorhaben Nr. 396, Heft Nr. 456 (1990), Frankfurt

Di-Modica, D.; Nachtigal, P.; Eilts, P.; Seume, J.R. (2022): Exhaust Gas Pulsation and Turbocharger Interaction,  22. Internationales Stuttgarter Symposium. Proceedings. Springer Vieweg, Wiesbaden
DOI: 10.1007/978-3-658-37009-1_42
ISBN: 978-3-658-37009-1

Nachtigal, P.; Mai, H.; Rätz H.; Willers, O.; Seume, J.R. (2020): Auslegung und Regelung eines Pulsationsgenerators für Turbolader-Heißgasprüfstände,  Spannungsfeld Fahrzeugantriebe – Gedenkschrift für Prof. Dr.-Ing. Roland Baar, Universitätsverlag der TU Berlin, S. 628
DOI: 10.14279/depositonce-9822
ISBN: 978-3-7983-3161-7

Denkena, B., Gilge, P., Nübel, N., Seume, J.R. (2020): Regeneration Komplexer Investitionsgüter Systemdemonstrator,  20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), 2. Dezember 2020, Hannover, 27 Seiten